diff options
Diffstat (limited to 'app-admin/webmin/webmin-1.996.ebuild')
-rw-r--r-- | app-admin/webmin/webmin-1.996.ebuild | 313 |
1 files changed, 0 insertions, 313 deletions
diff --git a/app-admin/webmin/webmin-1.996.ebuild b/app-admin/webmin/webmin-1.996.ebuild deleted file mode 100644 index 603c502..0000000 --- a/app-admin/webmin/webmin-1.996.ebuild +++ /dev/null @@ -1,313 +0,0 @@ -# Copyright 2021 Gentoo Authors -# Distributed under the terms of the GNU General Public License v2 - -EAPI=7 -inherit pam systemd - -DESCRIPTION="A web-based Unix systems administration interface" -HOMEPAGE="http://www.webmin.com/" -RESTRICT="mirror" -SRC_URI="minimal? ( mirror://sourceforge/webadmin/${P}-minimal.tar.gz ) - !minimal? ( mirror://sourceforge/webadmin/${P}.tar.gz )" - -LICENSE="BSD GPL-2" -SLOT="0" - -KEYWORDS="~amd64 ~x86" - -IUSE="minimal mysql postgres ldap" -REQUIRED_USE="minimal? ( !mysql !postgres !ldap )" - -# All the required perl modules can be found easily using (in Webmin's root src dir): -# find . -name cpan_modules.pl -exec grep "::" {} \; -# NOTE: If Webmin doesn't find the required perl modules, it offers(runtime) the user -# to install them using the in-built cpan module, and this will mess up perl on the system -# That's why some modules are forced without a use flag -# NOTE: pam, ssl and dnssec-tools deps are forced for security and Gentoo compliance installation reasons -DEPEND="virtual/perl-MIME-Base64 - virtual/perl-Socket - virtual/perl-Sys-Syslog - virtual/perl-Time-HiRes - virtual/perl-Time-Local - dev-perl/Authen-Libwrap - dev-perl/IO-Tty - dev-perl/MD5 - dev-perl/Net-SSLeay - dev-perl/Authen-PAM - dev-perl/Sys-Hostname-Long - >=net-dns/dnssec-tools-1.13 - !minimal? ( - mysql? ( dev-perl/DBD-mysql ) - postgres? ( dev-perl/DBD-Pg ) - ldap? ( dev-perl/perl-ldap ) - dev-perl/XML-Generator - dev-perl/XML-Parser - ) -" -RDEPEND="${DEPEND}" - -src_prepare() { - default - - local perl="$( which perl )" - - # Remove the unnecessary and incompatible files - rm -rf acl/Authen-SolarisRBAC-0.1* - if ! use minimal ; then - rm -rf {format,{bsd,hpux,sgi}exports,zones,rbac} - rm -f mount/{free,net,open}bsd-mounts* - rm -f mount/macos-mounts* - fi - - # For security reasons remove the SSL certificate that comes with Webmin - # We will create our own later - rm -f miniserv.pem - - # Remove the Webmin setup scripts to avoid Webmin in runtime to mess up config - # We will use our own later - rm -f setup.{sh,pl} - - # Set the installation type/mode to Gentoo - echo "gentoo" > install-type - - # Fix the permissions of the install files - chmod -R og-w "${S}" - - # Since we should not modify any files after install - # we set the perl path in all cgi and pl files here using Webmin's routines - # The pl file is Prefix safe and works only on provided input, no other filesystem files - ebegin "Fixing perl path in source files" - (find "${S}" -name '*.cgi' -print ; find "${S}" -name '*.pl' -print) | $perl "${S}"/perlpath.pl $perl - - eend $? -} - -src_install() { - # Create config dir and keep - diropts -m0755 - dodir /etc/webmin - keepdir /etc/webmin - - # Create install dir - # Third party modules installed through Webmin go here too, so keep - dodir /usr/libexec/webmin - keepdir /usr/libexec/webmin - - # Copy our own setup script to installation folder - insinto /usr/libexec/webmin - newins "${FILESDIR}"/gentoo-setup-${PV} gentoo-setup.sh - fperms 0744 /usr/libexec/webmin/gentoo-setup.sh - - # This is here if we ever want in future ebuilds to add some specific - # config values in the /etc/webmin/miniserv.conf - # The format of this file should be the same as the one of miniserv.conf: - # var=value - # - # Uncomment it if you use such file. Before that check if upstream - # has this file in root dir too. - #newins "${FILESDIR}/miniserv-conf" miniserv-conf - - # Create the log dir and keep - diropts -m0700 - dodir /var/log/webmin - keepdir /var/log/webmin - - # Create the init.d file and put the neccessary variables there - newinitd "${FILESDIR}"/init.d.webmin webmin - sed -i \ - -e "s:%exe%:${EROOT}/usr/libexec/webmin/miniserv.pl:" \ - -e "s:%pid%:${EROOT}/var/run/webmin.pid:" \ - -e "s:%conf%:${EROOT}/etc/webmin/miniserv.conf:" \ - -e "s:%config%:${EROOT}/etc/webmin/config:" \ - -e "s:%perllib%:${EROOT}/usr/libexec/webmin:" \ - "${ED}/etc/init.d/webmin" \ - || die "Failed to patch the webmin init file" - - # Create the systemd service file and put the neccessary variables there - systemd_newunit "${FILESDIR}"/webmin.service webmin.service - sed -i \ - -e "s:%exe%:${EROOT}/usr/libexec/webmin/miniserv.pl:" \ - -e "s:%pid%:${EROOT}/var/run/webmin.pid:" \ - -e "s:%conf%:${EROOT}/etc/webmin/miniserv.conf:" \ - -e "s:%config%:${EROOT}/etc/webmin/config:" \ - -e "s:%perllib%:${EROOT}/usr/libexec/webmin:" \ - "${ED}$(_systemd_get_systemunitdir)/webmin.service" \ - || die "Failed to patch the webmin systemd service file" - - # Setup pam - pamd_mimic system-auth webmin auth account session - - # Copy files to installation folder - ebegin "Copying install files to destination" - cp -pPR "${S}"/* "${ED}/usr/libexec/webmin" - eend $? -} - -pkg_preinst() { - # First stop service if running so Webmin to not messup our config - ebegin "Stopping any running Webmin instance prior merging" - if systemd_is_booted ; then - systemctl stop webmin.service 2>/dev/null - else - rc-service --ifexists -- webmin --ifstarted stop - fi - eend $? -} - -pkg_postinst() { - # Run webmin_config first - non interactively - export INTERACTIVE="no" - webmin_config - # Every next time webmin_config should be interactive - INTERACTIVE="yes" - - ewarn - ewarn "Bare in mind that not all Webmin modules are Gentoo tweaked and may have some issues." - ewarn "Always be careful when using modules that modify init entries, do update of webmin, install CPAN modules etc." - ewarn "To avoid problems, please before using any module, look at its configuration options first." - ewarn "(Usually there is a link at top in the right pane of Webmin for configuring the module.)" - ewarn - if systemd_is_booted ; then - elog "- To make Webmin start at boot time, run: 'systemctl enable webmin.service'" - else - elog "- To make Webmin start at boot time, run: 'rc-update add webmin default'" - fi - elog "- The default URL to connect to Webmin is: https://localhost:10000" - elog "- The default user that can login is: root" - elog "- To reconfigure Webmin in case of problems run 'emerge --config app-admin/webmin'" -} - -pkg_prerm() { - # First stop service if running - we do not want Webmin to mess up config - ebegin "Stopping any running Webmin instance prior unmerging" - if systemd_is_booted ; then - systemctl stop webmin.service 2>/dev/null - else - rc-service --ifexists -- webmin --ifstarted stop - fi - eend $? -} - -pkg_postrm() { - # If removing webmin completely, remind the user for the Webmin's own cron jobs. - if [[ ! ${REPLACED_BY_VERSION} ]]; then - ewarn - ewarn "You have uninstalled Webmin, so have in mind that all cron jobs scheduled" - ewarn "by Webmin for its own modules, are left active and they will fail when Webmin is missing." - ewarn "To fix this just disable them if you intend to use Webmin again," - ewarn "OR delete them if not." - ewarn - fi -} - -pkg_config(){ - webmin_config -} - -webmin_config(){ - # First stop service if running - ebegin "Stopping any running Webmin instance" - if systemd_is_booted ; then - systemctl stop webmin.service 2>/dev/null - else - rc-service --ifexists -- webmin --ifstarted stop - fi - eend $? - - # Next set the default reset variable to 'none' - # reset/_reset can be: - # 'none' - does not reset anything, just upgrades if a conf is present - # OR installs new conf if a conf is missing - # 'soft' - deletes only $config_dir/config file and thus resetting most - # conf values to their defaults. Keeps the specific Webmin cron jobs - # 'hard' - deletes all files in $config_dir (keeping the .keep_* Gentoo file) - # and thus resetting all Webmin. Deletes the specific Webmin cron jobs too. - local _reset="none" - - # If in interactive mode ask user what should we do - if [[ "${INTERACTIVE}" = "yes" ]]; then - einfo - einfo "Please enter the number of the action you would like to perform?" - einfo - einfo "1. Update configuration" - einfo " (keeps old config options and adds the new ones)" - einfo "2. Soft reset configuration" - einfo " (keeps some old config options, the other options are set to default)" - ewarn " All Webmin users will be reset" - einfo "3. Hard reset configuration" - einfo " (all options including module options are set to default)" - ewarn " You will lose all Webmin configuration options you have done till now" - einfo "4. Exit this configuration utility (default)" - while [ "$correct" != "true" ] ; do - read answer - if [[ "$answer" = "1" ]] ; then - _reset="none" - correct="true" - elif [[ "$answer" = "2" ]] ; then - _reset="soft" - correct="true" - elif [[ "$answer" = "3" ]] ; then - _reset="hard" - correct="true" - elif [ "$answer" = "4" -o "$answer" = "" ] ; then - die "User aborted configuration." - else - echo "Answer not recognized. Enter a number from 1 to 4" - fi - done - - if [[ "$_reset" = "hard" ]]; then - while [ "$sure" != "true" ] ; do - ewarn "You will lose all Webmin configuration options you have done till now." - ewarn "Are you sure you want to do this? (y/n)" - read answer - if [[ $answer =~ ^[Yy]([Ee][Ss])?$ ]] ; then - sure="true" - elif [[ $answer =~ ^[Nn]([Oo])?$ ]] ; then - die "User aborted configuration." - else - echo "Answer not recognized. Enter 'y' or 'n'" - fi - done - fi - fi - - export reset=$_reset - - # Create ssl certificate for Webmin if there is not one in the proper place - if [[ ! -e "${EROOT}/etc/ssl/webmin/server.pem" ]]; then - SSL_ORGANIZATION="${SSL_ORGANIZATION:-Webmin Server}" - SSL_COMMONNAME="${SSL_COMMONNAME:-*}" - install_cert "${EROOT}/etc/ssl/webmin/server" - fi - - # Ensure all paths passed to the setup script use EROOT - export wadir="${EROOT}/usr/libexec/webmin" - export config_dir="${EROOT}/etc/webmin" - export var_dir="${EROOT}/var/log/webmin" - export tempdir="${T}" - export pidfile="${EROOT}/var/run/webmin.pid" - export perl="$( which perl )" - export os_type='gentoo-linux' - export os_version='*' - export real_os_type='Gentoo Linux' - export real_os_version='Any version' - # Forcing 'ssl', 'no_ssl2', 'no_ssl3', 'ssl_redirect', 'no_sslcompression', - # 'ssl_honorcipherorder', 'no_tls1' and 'no_tls1_1' for tightening security - export ssl=1 - export no_ssl2=1 - export no_ssl3=1 - export ssl_redirect=1 - export ssl_honorcipherorder=1 - export no_sslcompression=1 - export no_tls1=1 - export no_tls1_1=1 - export keyfile="${EROOT}/etc/ssl/webmin/server.pem" - export port=10000 - - export atboot=0 - - einfo "Executing Webmin's configure script" - $wadir/gentoo-setup.sh - - einfo "Configuration of Webmin done" -} |