diff options
Diffstat (limited to 'media-gfx/freecad/freecad-0.21.2-r2.ebuild')
| -rw-r--r-- | media-gfx/freecad/freecad-0.21.2-r2.ebuild | 375 |
1 files changed, 375 insertions, 0 deletions
diff --git a/media-gfx/freecad/freecad-0.21.2-r2.ebuild b/media-gfx/freecad/freecad-0.21.2-r2.ebuild new file mode 100644 index 000000000000..6f67542fe86c --- /dev/null +++ b/media-gfx/freecad/freecad-0.21.2-r2.ebuild @@ -0,0 +1,375 @@ +# Copyright 1999-2024 Gentoo Authors +# Distributed under the terms of the GNU General Public License v2 + +EAPI=8 + +PYTHON_COMPAT=( python3_{10..11} ) + +inherit check-reqs cmake optfeature python-single-r1 qmake-utils xdg + +DESCRIPTION="QT based Computer Aided Design application" +HOMEPAGE="https://www.freecad.org/ https://github.com/FreeCAD/FreeCAD" + +MY_PN=FreeCAD + +if [[ ${PV} = *9999 ]]; then + inherit git-r3 + EGIT_REPO_URI="https://github.com/${MY_PN}/${MY_PN}.git" + S="${WORKDIR}/freecad-${PV}" +else + SRC_URI="https://github.com/${MY_PN}/${MY_PN}/archive/refs/tags/${PV}.tar.gz -> ${P}.tar.gz" + KEYWORDS="~amd64" + S="${WORKDIR}/FreeCAD-${PV}" +fi + +# code is licensed LGPL-2 +# examples are licensed CC-BY-SA (without note of specific version) +LICENSE="LGPL-2 CC-BY-SA-4.0" +SLOT="0" +IUSE="debug designer +gui qt6 test" + +FREECAD_EXPERIMENTAL_MODULES="cloud netgen pcl" +FREECAD_STABLE_MODULES="addonmgr fem idf image inspection material + openscad part-design path points raytracing robot show surface + techdraw tux" + +for module in ${FREECAD_STABLE_MODULES}; do + IUSE="${IUSE} +${module}" +done +for module in ${FREECAD_EXPERIMENTAL_MODULES}; do + IUSE="${IUSE} ${module}" +done +unset module + +RESTRICT="!test? ( test )" + +RDEPEND=" + ${PYTHON_DEPS} + dev-libs/OpenNI2[opengl(+)] + dev-libs/boost:= + dev-libs/libfmt:= + dev-libs/libspnav[X] + dev-libs/xerces-c[icu] + !qt6? ( + dev-qt/qtconcurrent:5 + dev-qt/qtcore:5 + dev-qt/qtnetwork:5 + dev-qt/qtxml:5 + dev-qt/qtxmlpatterns:5 + ) + qt6? ( + dev-qt/qtbase:6[concurrent,network,xml] + ) + media-libs/freetype + media-libs/qhull:= + sci-libs/hdf5:=[fortran,zlib] + >=sci-libs/med-4.0.0-r1 + sci-libs/opencascade:=[json,vtk] + sci-libs/orocos_kdl:= + sys-libs/zlib + virtual/libusb:1 + cloud? ( + dev-libs/openssl:= + net-misc/curl + ) + fem? ( + !qt6? ( sci-libs/vtk:=[qt5,rendering] ) + qt6? ( sci-libs/vtk:=[-qt5,qt6,rendering] ) + ) + gui? ( + >=media-libs/coin-4.0.0 + virtual/glu + virtual/opengl + !qt6? ( + dev-qt/designer:5 + dev-qt/qtgui:5 + dev-qt/qtopengl:5 + dev-qt/qtprintsupport:5 + dev-qt/qtsvg:5 + dev-qt/qtwebengine:5[widgets] + dev-qt/qtwidgets:5 + dev-qt/qtx11extras:5 + pcl? ( sci-libs/pcl[qt5] ) + $(python_gen_cond_dep ' + dev-python/matplotlib[${PYTHON_USEDEP}] + >=dev-python/pivy-0.6.5[${PYTHON_USEDEP}] + dev-python/pyside2[gui,svg,webchannel,webengine,${PYTHON_USEDEP}] + dev-python/shiboken2[${PYTHON_USEDEP}] + ' python3_{10..11} ) + ) + qt6? ( + designer? ( dev-qt/qttools:6[designer] ) + dev-qt/qt5compat:6 + dev-qt/qttools:6[widgets] + dev-qt/qtbase:6[gui,opengl,widgets] + dev-qt/qtsvg:6 + dev-qt/qtwebengine:6[widgets] + pcl? ( sci-libs/pcl[-qt5,qt6(-)] ) + $(python_gen_cond_dep ' + dev-python/matplotlib[${PYTHON_USEDEP}] + >=dev-python/pivy-0.6.5[${PYTHON_USEDEP}] + dev-python/pyside6[gui,svg,webchannel,webengine,${PYTHON_USEDEP}] + dev-python/shiboken6[${PYTHON_USEDEP}] + ' ) + ) + ) + netgen? ( media-gfx/netgen[opencascade] ) + openscad? ( media-gfx/openscad ) + pcl? ( sci-libs/pcl:=[opengl,openni2,vtk] ) + $(python_gen_cond_dep ' + dev-python/numpy[${PYTHON_USEDEP}] + dev-python/pybind11[${PYTHON_USEDEP}] + addonmgr? ( dev-python/GitPython[${PYTHON_USEDEP}] ) + fem? ( dev-python/ply[${PYTHON_USEDEP}] ) + ') +" +DEPEND=" + ${RDEPEND} + >=dev-cpp/eigen-3.3.1:3 + test? ( + $(python_gen_cond_dep 'dev-python/pyyaml[${PYTHON_USEDEP}]') + !qt6? ( dev-qt/qttest:5 ) + ) +" +BDEPEND=" + app-text/dos2unix + dev-lang/swig + test? ( + $(python_gen_cond_dep 'dev-python/pyyaml[${PYTHON_USEDEP}]') + !qt6? ( dev-qt/qttest:5 ) + ) +" + +# To get required dependencies: +# 'grep REQUIRES_MODS cMake/FreeCAD_Helpers/CheckInterModuleDependencies.cmake' +# We set the following requirements by default: +# arch, draft, drawing, import, mesh, part, qt5, sketcher, spreadsheet, start, web. +# +# Additionally, we auto-enable mesh_part, flat_mesh and smesh +# Fem actually needs smesh, but as long as we don't have a smesh package, we enable +# smesh through the mesh USE flag. Note however, the fem<-smesh dependency isn't +# reflected by the REQUIRES_MODS macro, but at +# cMake/FreeCAD_Helpers/InitializeFreeCADBuildOptions.cmake:187. +# +# The increase in auto-enabled workbenches is due to their need in parts of the +# test suite when compiled with a minimal set of USE flags. +REQUIRED_USE=" + ${PYTHON_REQUIRED_USE} + designer? ( gui ) + inspection? ( points ) + path? ( robot ) +" + +PATCHES=( + "${FILESDIR}"/${PN}-0.21.0-0001-Gentoo-specific-disable-ccache-usage.patch + "${FILESDIR}"/${PN}-0.21.1-Gentoo-specific-don-t-check-vcs.patch +) + +DOCS=( CODE_OF_CONDUCT.md README.md ) + +CHECKREQS_DISK_BUILD="2G" + +pkg_setup() { + check-reqs_pkg_setup + python-single-r1_pkg_setup + [[ -z ${CASROOT} ]] && die "\${CASROOT} not set, please run eselect opencascade" +} + +src_prepare() { + # Fix desktop file + sed -e 's/Exec=FreeCAD/Exec=freecad/' -i src/XDGData/org.freecadweb.FreeCAD.desktop || die + + find "${S}" -type f -exec dos2unix -q {} \; || die "failed to convert to unix line endings" + + cmake_src_prepare +} + +src_configure() { + local mycmakeargs=( + -DBUILD_ADDONMGR=$(usex addonmgr) + -DBUILD_ARCH=ON + -DBUILD_ASSEMBLY=OFF # deprecated + -DBUILD_CLOUD=$(usex cloud) + -DBUILD_COMPLETE=OFF # deprecated + -DBUILD_DRAFT=ON + -DBUILD_DESIGNER_PLUGIN=$(usex designer) + -DBUILD_ENABLE_CXX_STD:STRING="C++17" # needed for >=boost-1.77.0 + -DBUILD_FEM=$(usex fem) + -DBUILD_FEM_NETGEN=$(usex netgen) + -DBUILD_FLAT_MESH=ON + -DBUILD_FORCE_DIRECTORY=ON # force building in a dedicated directory + -DBUILD_FREETYPE=ON # automagic dep + -DBUILD_GUI=$(usex gui) + -DBUILD_IDF=$(usex idf) + -DBUILD_IMAGE=$(usex image) + -DBUILD_IMPORT=ON # import module for various file formats + -DBUILD_INSPECTION=$(usex inspection) + -DBUILD_JTREADER=OFF # code has been removed upstream, but option is still there + -DBUILD_MATERIAL=$(usex material) + -DBUILD_MESH=ON + -DBUILD_MESH_PART=ON + -DBUILD_OPENSCAD=$(usex openscad) + -DBUILD_PART=ON + -DBUILD_PART_DESIGN=$(usex part-design) + -DBUILD_PATH=$(usex path) + -DBUILD_POINTS=$(usex points) + -DBUILD_RAYTRACING=$(usex raytracing) + -DBUILD_REVERSEENGINEERING=OFF # currently only an empty sandbox + -DBUILD_ROBOT=$(usex robot) + -DBUILD_SHOW=$(usex show) + -DBUILD_SKETCHER=ON # needed by draft workspace + -DBUILD_SMESH=ON + -DBUILD_SPREADSHEET=ON + -DBUILD_START=ON + -DBUILD_SURFACE=$(usex surface) + -DBUILD_TECHDRAW=$(usex techdraw) + -DBUILD_TEST=ON # always build test workbench for run-time testing + -DBUILD_TUX=$(usex tux) + -DBUILD_VR=OFF + -DBUILD_WEB=ON # needed by start workspace + -DBUILD_WITH_CONDA=OFF + + -DCMAKE_INSTALL_DATADIR=/usr/share/${PN}/data + -DCMAKE_INSTALL_DOCDIR=/usr/share/doc/${PF} + -DCMAKE_INSTALL_INCLUDEDIR=/usr/include/${PN} + -DCMAKE_INSTALL_PREFIX=/usr/$(get_libdir)/${PN} + + -DFREECAD_BUILD_DEBIAN=OFF + + -DFREECAD_USE_EXTERNAL_KDL=ON + -DFREECAD_USE_EXTERNAL_SMESH=OFF # no package in Gentoo + -DFREECAD_USE_EXTERNAL_ZIPIOS=OFF # doesn't work yet, also no package in Gentoo tree + -DFREECAD_USE_FREETYPE=ON + -DFREECAD_USE_OCC_VARIANT:STRING="Official Version" + -DFREECAD_USE_PCL=$(usex pcl) + -DFREECAD_USE_PYBIND11=ON + -DFREECAD_USE_QT_FILEDIALOG=ON + -DFREECAD_USE_QTWEBMODULE:STRING="Qt WebEngine" + + # install python modules to site-packages' dir. True only for the main package, + # sub-packages will still be installed inside /usr/lib64/freecad + -DINSTALL_TO_SITEPACKAGES=ON + + # Use the version of shiboken2 that matches the selected python version + -DPYTHON_CONFIG_SUFFIX="-${EPYTHON}" + -DPython3_EXECUTABLE=${PYTHON} + ) + + if use debug; then + # BUILD_SANDBOX currently broken, see + # https://forum.freecadweb.org/viewtopic.php?f=4&t=36071&start=30#p504595 + mycmakeargs+=( + -DBUILD_SANDBOX=OFF + -DBUILD_TEMPLATE=ON + ) + else + mycmakeargs+=( + -DBUILD_SANDBOX=OFF + -DBUILD_TEMPLATE=OFF + ) + fi + + if use qt6; then + mycmakeargs+=( + -DFREECAD_QT_MAJOR_VERSION=6 + -DFREECAD_QT_VERSION=6 + -DQT_DEFAULT_MAJOR_VERSION=6 + -DQt6Core_MOC_EXECUTABLE="$(qt6_get_bindir)/moc" + -DQt6Core_RCC_EXECUTABLE="$(qt6_get_bindir)/rcc" + -DBUILD_QT5=OFF + # Drawing module unmaintained and not ported to qt6 + -DBUILD_DRAWING=OFF + ) + else + mycmakeargs+=( + -DFREECAD_QT_MAJOR_VERSION=5 + -DFREECAD_QT_VERSION=5 + -DQT_DEFAULT_MAJOR_VERSION=5 + -DQt5Core_MOC_EXECUTABLE="$(qt5_get_bindir)/moc" + -DQt5Core_RCC_EXECUTABLE="$(qt5_get_bindir)/rcc" + -DBUILD_QT5=ON + # Drawing module unmaintained and not ported to qt6 + -DBUILD_DRAWING=ON + ) + fi + + cmake_src_configure +} + +# We use the FreeCADCmd binary instead of the FreeCAD binary here +# for two reasons: +# 1. It works out of the box with USE=-gui as well, not needing a guard +# 2. We don't need virtualx.eclass and it's dependencies +# The exported environment variables are needed, so freecad does know +# where to save it's temporary files, and where to look and write it's +# configuration. Without those, there are sandbox violation, when it +# tries to create /var/lib/portage/home/.FreeCAD directory. +src_test() { + pushd "${BUILD_DIR}" > /dev/null || die + export FREECAD_USER_HOME="${HOME}" + export FREECAD_USER_DATA="${T}" + export FREECAD_USER_TEMP="${T}" + nonfatal ./bin/FreeCADCmd --run-test 0 + popd > /dev/null || die +} + +src_install() { + cmake_src_install + + dobin src/Tools/freecad-thumbnailer + + if use gui; then + newbin - freecad <<- _EOF_ + #!/bin/sh + # https://github.com/coin3d/coin/issues/451 + : \${QT_QPA_PLATFORM:=xcb} + export QT_QPA_PLATFORM + exec /usr/$(get_libdir)/${PN}/bin/FreeCAD + _EOF_ + mv "${ED}"/usr/$(get_libdir)/${PN}/share/* "${ED}"/usr/share || die "failed to move shared resources" + fi + dosym -r /usr/$(get_libdir)/${PN}/bin/FreeCADCmd /usr/bin/freecadcmd + + rm -r "${ED}"/usr/$(get_libdir)/${PN}/include/E57Format || die "failed to drop unneeded include directory E57Format" + use test && (rm -r "${ED}"/usr/include/${PN}/{gmock,gtest} || die) + + python_optimize "${ED}"/usr/share/${PN}/data/Mod/Start/StartPage "${ED}"/usr/$(get_libdir)/${PN}{/Ext,/Mod}/ + # compile main package in python site-packages as well + python_optimize +} + +pkg_postinst() { + xdg_pkg_postinst + + einfo "You can load a lot of additional workbenches using the integrated" + einfo "AddonManager." + + # ToDo: check opencv, pysolar (::science), elmerfem (::science) + # ifc++, ifcopenshell, z88 (no pkgs), calculix-ccx (::waebbl) + einfo "There are a lot of additional tools, for which FreeCAD has builtin" + einfo "support. Some of them are available in Gentoo. Take a look at" + einfo "https://wiki.freecadweb.org/Installing#External_software_supported_by_FreeCAD" + optfeature_header "Computational utilities" + optfeature "BLAS library" sci-libs/openblas + optfeature "Statistical computation with Python" dev-python/pandas + optfeature "Use scientific computation with Python" dev-python/scipy + optfeature "Use symbolic math with Python" dev-python/sympy + optfeature_header "Imaging, Plotting and Rendering utilities" + optfeature "Dependency graphs" media-gfx/graphviz + optfeature "PBR Rendering" media-gfx/povray + optfeature_header "Import / Export" + optfeature "Interact with git repositories" dev-python/GitPython + optfeature "Work with COLLADA documents" dev-python/pycollada + optfeature "YAML importer and emitter" dev-python/pyyaml + optfeature "Importing and exporting 2D AutoCAD DWG files" media-gfx/libredwg + optfeature "Importing and exporting geospatial data formats" sci-libs/gdal + optfeature "Working with projection data" sci-libs/proj + optfeature_header "Meshing and FEM" + optfeature "FEM mesh generator" sci-libs/gmsh + optfeature "Triangulating meshes" sci-libs/gts + optfeature "Visualization" sci-visualization/paraview +} + +pkg_postrm() { + xdg_pkg_postrm +} |