sys-apps/lm_sensors: Cleanup old

See: https://github.com/gentoo/gentoo/pull/5847
Package-Manager: Portage-2.3.10, Repoman-2.3.3

12 files changed, 0 insertions, 733 deletions

diff --git a/sys-apps/lm_sensors/Manifest b/sys-apps/lm_sensors/Manifest
index c9e6ed72b04a..7abb62626fca 100644
--- a/sys-apps/lm_sensors/Manifest
+++ b/sys-apps/lm_sensors/Manifest
@@ -1,4 +1 @@
-DIST lm_sensors-3.3.4.tar.bz2 172226 SHA256 b4608610cb5de4b24e3fe1ae357712e8633a8a929bbb42df5eecc4ccee6ba76d SHA512 a375f747a1687da0fe743d731893156f7983e001725c2d7cd284cefd3e8922deb3dfe542d3c901e3da8fff321633d64180a637d780b5e1bb3f1e9a254c16b7e6 WHIRLPOOL 4011264a56c36ffcfe28d357ceae1929fdf8a21c27bfaba928c9a7b48ef2b8422cd6650981a4c8f220900cc45526ca4bbfda9810b54db0efaf15cdaad4599838
-DIST lm_sensors-3.3.5.tar.bz2 173609 SHA256 5dae6a665e1150159a93743c4ff1943a7efe02cd9d3bb12c4805e7d7adcf4fcf SHA512 0874084c3dd40b93ed05e1955f76e35e78ac3ac2343341d8ab5412fd941ea300b3a4b1320bec3a5bfb07309e82f42cc5dac0a728cdfddac4053d4fdb96dc12e7 WHIRLPOOL f82d0d1a4b7647cf9076f16861024dd65fd97bd34a7498fcc06e851913f5b71805689d915b67a628b6cd7aea2b46225d64df8833550c785236311c9980ac8ed1
-DIST lm_sensors-3.4.0.tar.bz2 175802 SHA256 e0579016081a262dd23eafe1d22b41ebde78921e73a1dcef71e05e424340061f SHA512 993064bd14b855c1ae8c057e89313df5b3d5efe441fb2e8c3e508f42bb15658564df2563fac8fabbdb0d650dfdbc694037736c748d45cb9d85dfb8fb5a3d1ea9 WHIRLPOOL 82ed9b922a352702d974ea075222894c69a081da1fca9e026e3176266bb6a8911fd8fc0cd73f2d9ab3524cd30cfe2e688a015032829cf32d844592debaf9924d
 DIST lm_sensors-3.4.0_p20160725.tar.gz 206868 SHA256 c3bb872cabcf3fa4b597bc1a8d6ee277a80b28c811125a45341e0874a97ac102 SHA512 abae5c4ba2ed0b763fda918e2ededb2148a3edd1d33709a34b91a33398a64e8988d14c5d16a5c756bf55beaa383e661c76e1acccc7b5ef858aa772e96878131b WHIRLPOOL 4d7620f74ea46f559b6b293a7cb20f0296277f7c10f54b368fd63bef2d1496b3769f39066cc4f980337d99b3a1dbb51af8e9eed724605f153a08cfa9fd28739b
diff --git a/sys-apps/lm_sensors/files/fancontrol-init.d-2 b/sys-apps/lm_sensors/files/fancontrol-init.d-2
deleted file mode 100644
index ea60db78370d..000000000000
--- a/sys-apps/lm_sensors/files/fancontrol-init.d-2
+++ /dev/null
@@ -1,22 +0,0 @@
-#!/sbin/openrc-run
-# Copyright 1999-2012 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-CONFIG=/etc/fancontrol
-
-depend() {
-	need localmount
-	use lm_sensors
-}
-
-command=/usr/sbin/fancontrol
-command_arguments="${CONFIG}"
-start_stop_daemon_args="--background"
-pidfile=/var/run/fancontrol.pid
-
-start_pre() {
-	if [ ! -f ${CONFIG} ]; then
-		eerror "Configuration file ${CONFIG} not found"
-		return 1
-	fi
-}
diff --git a/sys-apps/lm_sensors/files/fancontrol.service b/sys-apps/lm_sensors/files/fancontrol.service
deleted file mode 100644
index c86b498f830c..000000000000
--- a/sys-apps/lm_sensors/files/fancontrol.service
+++ /dev/null
@@ -1,9 +0,0 @@
-[Unit]
-Description=Fan control daemon
-
-[Service]
-PIDFile=/var/run/fancontrol.pid
-ExecStart=/usr/sbin/fancontrol
-
-[Install]
-WantedBy=multi-user.target
diff --git a/sys-apps/lm_sensors/files/lm_sensors-3-init.d b/sys-apps/lm_sensors/files/lm_sensors-3-init.d
deleted file mode 100644
index 461d1ede93e0..000000000000
--- a/sys-apps/lm_sensors/files/lm_sensors-3-init.d
+++ /dev/null
@@ -1,104 +0,0 @@
-#!/sbin/openrc-run
-# Copyright 1999-2006 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-checkconfig() {
-	if [ ! -f /etc/conf.d/lm_sensors ]; then
-		eerror "/etc/conf.d/lm_sensors does not exist, try running sensors-detect"
-		return 1
-	fi
-
-	if [ "${LOADMODULES}" = "yes" -a -f /proc/modules ]; then
-		if [ -z "${MODULE_0}" ]; then
-			eerror "MODULE_0 is not set in /etc/conf.d/lm_sensors, try running sensors-detect"
-			return 1
-		fi
-	fi
-}
-
-start() {
-	checkconfig || return 1
-
-	if [ "${LOADMODULES}" = "yes" -a -f /proc/modules ]; then
-		einfo "Loading lm_sensors modules..."
-
-		mount | grep sysfs >/dev/null 2>&1
-		if [ ${?} = 0 ]; then
-			if ! ( [ -e /sys/i2c ] || [ -e /sys/bus/i2c ] ); then
-				ebegin "  Loading i2c-core"
-				modprobe i2c-core >/dev/null 2>&1
-				if [ ${?} != 0 ]; then
-					eerror "    Could not load i2c-core!"
-					eend 1
-				fi
-				( [ -e /sys/i2c ] || [ -e /sys/bus/i2c ] ) || return 1
-				eend 0
-			fi
-		elif ! [ -e /proc/sys/dev/sensors ]; then
-			ebegin "  Loading i2c-proc"
-			modprobe i2c-proc >/dev/null 2>&1
-			if [ ${?} != 0 ]; then
-				eerror "    Could not load i2c-proc!"
-				eend 1
-			fi
-			[ -e /proc/sys/dev/sensors ] || return 1
-			eend 0
-		fi
-
-		i=0
-		while true; do
-			module=`eval echo '$'MODULE_${i}`
-			module_args=`eval echo '$'MODULE_${i}_ARGS`
-			if [ -z "${module}" ]; then
-				break
-			fi
-			ebegin "  Loading ${module}"
-			modprobe ${module} ${module_args} >/dev/null 2>&1
-			eend $?
-			i=$(($i+1))
-		done
-	fi
-
-	if [ "${INITSENSORS}" = "yes" ]; then
-		if ! [ -f /etc/sensors3.conf ]; then
-			eerror "/etc/sensors3.conf does not exist!"
-			return 1
-		fi
-
-		ebegin "Initializing sensors"
-		/usr/bin/sensors -s >/dev/null 2>&1
-		eend ${?}
-	fi
-}
-
-stop() {
-	checkconfig || return 1
-
-	if [ "${LOADMODULES}" = "yes" -a -f /proc/modules ]; then
-		einfo "Unloading lm_sensors modules..."
-
-		# find the highest possible MODULE_ number
-		i=0
-		while true; do
-			module=`eval echo '$'MODULE_${i}`
-			if [ -z "${module}" ] ; then
-				break
-			fi
-			i=$(($i+1))
-		done
-
-		while [ ${i} -gt 0 ]; do
-			i=$(($i-1))
-			module=`eval echo '$'MODULE_${i}`
-			ebegin "  Unloading ${module}"
-			rmmod ${module} >/dev/null 2>&1
-			eend $?
-		done
-
-		if [ -e /proc/sys/dev/sensors ] ; then
-			ebegin "  Unloading i2c-proc"
-			rmmod i2c-proc >/dev/null 2>&1
-			eend $?
-		fi
-	fi
-}
diff --git a/sys-apps/lm_sensors/files/lm_sensors-3.3.4-sensors-detect-gentoo.patch b/sys-apps/lm_sensors/files/lm_sensors-3.3.4-sensors-detect-gentoo.patch
deleted file mode 100644
index 215969af2cb6..000000000000
--- a/sys-apps/lm_sensors/files/lm_sensors-3.3.4-sensors-detect-gentoo.patch
+++ /dev/null
@@ -1,118 +0,0 @@
-diff --git a/prog/detect/sensors-detect b/prog/detect/sensors-detect
-index fb17481..bb324c2 100755
---- a/prog/detect/sensors-detect
-+++ b/prog/detect/sensors-detect
-@@ -20,6 +20,9 @@
- #    MA 02110-1301 USA.
- #
- 
-+# Gentoo specific modifications based on a patch from Rudo Thomas
-+# <thomr9am@ss1000.ms.mff.cuni.cz>
-+
- require 5.004;
- 
- use strict;
-@@ -6671,26 +6674,33 @@ sub write_config
- 			print MODPROBE_D $configfile;
- 			close(MODPROBE_D);
- 		} else {
-+			print "\nIf you want to load the modules at startup, generate a config file\n",
-+			      "below and make sure lm_sensors gets started at boot time; e.g\n",
-+			      "\$ rc-update add lm_sensors default\n";
- 			print "To make the sensors modules behave correctly, add these lines to\n".
--			      "/etc/modprobe.conf:\n\n";
-+			      "/etc/modules.d/lm_sensors and run modules-update:\n\n";
- 			print "#----cut here----\n".
- 			      $configfile.
- 			      "#----cut here----\n\n";
- 		}
- 	}
- 
--	my $have_sysconfig = -d '/etc/sysconfig';
--	printf "Do you want to \%s /etc/sysconfig/lm_sensors? (\%s): ",
--	       (-e '/etc/sysconfig/lm_sensors' ? 'overwrite' : 'generate'),
--	       ($have_sysconfig ? 'YES/no' : 'yes/NO');
--	$_ = <STDIN>;
--	if (($have_sysconfig and not m/^\s*n/i) or m/^\s*y/i) {
--		unless ($have_sysconfig) {
--			mkdir('/etc/sysconfig', 0777)
--				or die "Sorry, can't create /etc/sysconfig ($!)";
-+	my $have_config = -f '/etc/conf.d/lm_sensors';
-+	print "\nDo you want to ".($have_config?"overwrite":"generate").
-+	      " /etc/conf.d/lm_sensors? Enter s to specify other file name?\n",
-+	      "  (".($have_config?"yes/NO":"YES/no")."/s): ";
-+	my $reply = <STDIN>;
-+
-+	if (($have_config and $reply =~ /^\s*[Yy]/) or
-+		(not $have_config and not $reply =~ /^\s*[Nn]/) or
-+		$reply =~ /^\s*[Ss]/) {
-+		my $filename = "/etc/conf.d/lm_sensors";
-+		if ($reply =~ /^\s*[Ss]/) {
-+			print "Specify the file to store the configuration to: ";
-+			$filename = <STDIN>;
- 		}
--		open(local *SYSCONFIG, ">/etc/sysconfig/lm_sensors")
--			or die "Sorry, can't create /etc/sysconfig/lm_sensors ($!)";
-+		open(local *SYSCONFIG, ">".$filename)
-+			or die "Sorry, can't create $filename ($!).";
- 		print SYSCONFIG "# Generated by sensors-detect on " . scalar localtime() . "\n";
- 		print SYSCONFIG <<'EOT';
- # This file is sourced by /etc/init.d/lm_sensors and defines the modules to
-@@ -6701,30 +6711,17 @@ sub write_config
- # BUS_MODULES for any required bus driver module (for example for I2C or SPI).
- 
- EOT
-+		print SYSCONFIG
-+			"# Load modules at startup\n".
-+			"LOADMODULES=yes\n\n".
-+			"# Initialize sensors at startup\n".
-+			"INITSENSORS=yes\n\n";
- 		print SYSCONFIG "BUS_MODULES=\"", join(" ", @{$bus_modules}), "\"\n"
- 			if @{$bus_modules};
- 		print SYSCONFIG "HWMON_MODULES=\"", join(" ", @{$hwmon_modules}), "\"\n";
- 		close(SYSCONFIG);
- 
--		if (-x "/bin/systemctl" && -d "/lib/systemd/system" &&
--		    ! -f "/lib/systemd/system/lm_sensors.service") {
--			print "Copy prog/init/lm_sensors.service to /lib/systemd/system\n".
--			      "and run 'systemctl enable lm_sensors.service'\n".
--			      "for initialization at boot time.\n";
--			return;
--		}
--
--		if (-x "/bin/systemctl" &&
--		    -f "/lib/systemd/system/lm_sensors.service") {
--			system("/bin/systemctl", "enable", "lm_sensors.service");
--			system("/bin/systemctl", "start", "lm_sensors.service");
--			# All done, don't check for /etc/init.d/lm_sensors
--			return;
--		}
--
--		print "Copy prog/init/lm_sensors.init to /etc/init.d/lm_sensors\n".
--		      "for initialization at boot time.\n"
--			unless -f "/etc/init.d/lm_sensors";
-+		print "Done.\n";
- 
- 		if (-x "/sbin/insserv" && -f "/etc/init.d/lm_sensors") {
- 			system("/sbin/insserv", "/etc/init.d/lm_sensors");
-@@ -6738,20 +6735,6 @@ EOT
- 			      "kernel modules.\n\n";
- 		}
- 	} else {
--		print "To load everything that is needed, add this to one of the system\n".
--		      "initialization scripts (e.g. /etc/rc.d/rc.local):\n\n";
--		print "#----cut here----\n";
--		if (@{$bus_modules}) {
--			print "# Adapter drivers\n";
--			print "modprobe $_\n" foreach (@{$bus_modules});
--		}
--		print "# Chip drivers\n";
--		print "modprobe $_\n" foreach (@{$hwmon_modules});
--		print((-e '/usr/bin/sensors' ?
--		       "/usr/bin/sensors -s\n" :
--		       "/usr/local/bin/sensors -s\n").
--		      "#----cut here----\n\n");
--
- 		print "If you have some drivers built into your kernel, the list above will\n".
- 		      "contain too many modules. Skip the appropriate ones! You really\n".
- 		      "should try these commands right now to make sure everything is\n".
diff --git a/sys-apps/lm_sensors/files/lm_sensors-3.3.5-sensors-detect-gentoo.patch b/sys-apps/lm_sensors/files/lm_sensors-3.3.5-sensors-detect-gentoo.patch
deleted file mode 100644
index 0ea9a02b3f9a..000000000000
--- a/sys-apps/lm_sensors/files/lm_sensors-3.3.5-sensors-detect-gentoo.patch
+++ /dev/null
@@ -1,120 +0,0 @@
---- lm_sensors-3.3.5/prog/detect/sensors-detect
-+++ lm_sensors-3.3.5/prog/detect/sensors-detect
-@@ -20,6 +20,9 @@
- #    MA 02110-1301 USA.
- #
- 
-+# Gentoo specific modifications based on a patch from Rudo Thomas
-+# <thomr9am@ss1000.ms.mff.cuni.cz>
-+
- require 5.004;
- 
- use strict;
-@@ -6762,26 +6765,33 @@
- 			print MODPROBE_D $configfile;
- 			close(MODPROBE_D);
- 		} else {
-+			print "\nIf you want to load the modules at startup, generate a config file\n",
-+			      "below and make sure lm_sensors gets started at boot time; e.g\n",
-+			      "\$ rc-update add lm_sensors default\n";
- 			print "To make the sensors modules behave correctly, add these lines to\n".
--			      "/etc/modprobe.conf:\n\n";
-+			      "/etc/modules.d/lm_sensors and run modules-update:\n\n";
- 			print "#----cut here----\n".
- 			      $configfile.
- 			      "#----cut here----\n\n";
- 		}
- 	}
- 
--	my $have_sysconfig = -d '/etc/sysconfig';
--	printf "Do you want to \%s /etc/sysconfig/lm_sensors? (\%s): ",
--	       (-e '/etc/sysconfig/lm_sensors' ? 'overwrite' : 'generate'),
--	       ($have_sysconfig ? 'YES/no' : 'yes/NO');
--	$_ = read_answer();
--	if (($have_sysconfig and not m/^\s*n/i) or m/^\s*y/i) {
--		unless ($have_sysconfig) {
--			mkdir('/etc/sysconfig', 0777)
--				or die "Sorry, can't create /etc/sysconfig ($!)";
-+	my $have_sysconfig = -f '/etc/conf.d/lm_sensors';
-+	printf "Do you want to ".($have_sysconfig?"overwrite":"generate").
-+	       " /etc/conf.d/lm_sensors? Enter s to specify other file name?\n",
-+	       "  (".($have_sysconfig?"yes/NO":"YES/no")."/s): ";
-+	my $reply = read_answer();
-+
-+	if (($have_sysconfig and $reply =~ /^\s*[Yy]/) or
-+		(not $have_sysconfig and not $reply =~ /^\s*[Nn]/) or
-+		$reply =~ /^\s*[Ss]/) {
-+		my $filename = "/etc/conf.d/lm_sensors";
-+		if ($reply =~ /^\s*[Ss]/) {
-+			print "Specify the file to store the configuration to: ";
-+			$filename = read_answer();
- 		}
--		open(local *SYSCONFIG, ">/etc/sysconfig/lm_sensors")
--			or die "Sorry, can't create /etc/sysconfig/lm_sensors ($!)";
-+		open(local *SYSCONFIG, ">".$filename)
-+			or die "Sorry, can't create $filename ($!).";
- 		print SYSCONFIG "# Generated by sensors-detect on " . scalar localtime() . "\n";
- 		print SYSCONFIG <<'EOT';
- # This file is sourced by /etc/init.d/lm_sensors and defines the modules to
-@@ -6792,30 +6802,17 @@
- # BUS_MODULES for any required bus driver module (for example for I2C or SPI).
- 
- EOT
-+		print SYSCONFIG
-+			"# Load modules at startup\n".
-+			"LOADMODULES=yes\n\n".
-+			"# Initialize sensors at startup\n".
-+			"INITSENSORS=yes\n\n";
- 		print SYSCONFIG "BUS_MODULES=\"", join(" ", @{$bus_modules}), "\"\n"
- 			if @{$bus_modules};
- 		print SYSCONFIG "HWMON_MODULES=\"", join(" ", @{$hwmon_modules}), "\"\n";
- 		close(SYSCONFIG);
- 
--		if (-x "/bin/systemctl" && -d "/lib/systemd/system" &&
--		    ! -f "/lib/systemd/system/lm_sensors.service") {
--			print "Copy prog/init/lm_sensors.service to /lib/systemd/system\n".
--			      "and run 'systemctl enable lm_sensors.service'\n".
--			      "for initialization at boot time.\n";
--			return;
--		}
--
--		if (-x "/bin/systemctl" &&
--		    -f "/lib/systemd/system/lm_sensors.service") {
--			system("/bin/systemctl", "enable", "lm_sensors.service");
--			system("/bin/systemctl", "start", "lm_sensors.service");
--			# All done, don't check for /etc/init.d/lm_sensors
--			return;
--		}
--
--		print "Copy prog/init/lm_sensors.init to /etc/init.d/lm_sensors\n".
--		      "for initialization at boot time.\n"
--			unless -f "/etc/init.d/lm_sensors";
-+		print "Done.\n";
- 
- 		if (-x "/sbin/insserv" && -f "/etc/init.d/lm_sensors") {
- 			system("/sbin/insserv", "/etc/init.d/lm_sensors");
-@@ -6828,24 +6825,6 @@
- 			print "You should now start the lm_sensors service to load the required\n".
- 			      "kernel modules.\n\n";
- 		}
--	} else {
--		print "To load everything that is needed, add this to one of the system\n".
--		      "initialization scripts (e.g. /etc/rc.d/rc.local):\n\n";
--		print "#----cut here----\n";
--		if (@{$bus_modules}) {
--			print "# Adapter drivers\n";
--			print "modprobe $_\n" foreach (@{$bus_modules});
--		}
--		print "# Chip drivers\n";
--		print "modprobe $_\n" foreach (@{$hwmon_modules});
--		print((-e '/usr/bin/sensors' ?
--		       "/usr/bin/sensors -s\n" :
--		       "/usr/local/bin/sensors -s\n").
--		      "#----cut here----\n\n");
--
--		print "You really should try these commands right now to make sure everything\n".
--		      "is working properly. Monitoring programs won't work until the needed\n".
--		      "modules are loaded.\n\n";
- 	}
- }
- 
diff --git a/sys-apps/lm_sensors/files/sensord-4-init.d b/sys-apps/lm_sensors/files/sensord-4-init.d
deleted file mode 100644
index beaecbfabf77..000000000000
--- a/sys-apps/lm_sensors/files/sensord-4-init.d
+++ /dev/null
@@ -1,21 +0,0 @@
-#!/sbin/openrc-run
-# Copyright 1999-2013 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-CONFIG=/etc/sensors3.conf
-
-depend() {
-	need localmount
-	use logger lm_sensors
-}
-
-pidfile=/run/sensord.pid
-command=/usr/sbin/sensord
-command_args="--config-file ${CONFIG} ${SENSORD_OPTIONS} --pid-file ${pidfile}"
-
-start_pre() {
-	if [ ! -f ${CONFIG} ]; then
-		eerror "Configuration file ${CONFIG} not found"
-		return 1
-	fi
-}
diff --git a/sys-apps/lm_sensors/files/sensord-conf.d b/sys-apps/lm_sensors/files/sensord-conf.d
deleted file mode 100644
index d82841aebd4a..000000000000
--- a/sys-apps/lm_sensors/files/sensord-conf.d
+++ /dev/null
@@ -1,3 +0,0 @@
-# Extra options to pass to the sensord daemon,
-# see sensord(8) for more information
-SENSORD_OPTIONS=""
diff --git a/sys-apps/lm_sensors/files/sensord.service b/sys-apps/lm_sensors/files/sensord.service
deleted file mode 100644
index 6d272f1efd15..000000000000
--- a/sys-apps/lm_sensors/files/sensord.service
+++ /dev/null
@@ -1,9 +0,0 @@
-[Unit]
-Description=Sensor information logging daemon
-
-[Service]
-PIDFile=/var/run/sensord.pid
-ExecStart=/usr/sbin/sensord
-
-[Install]
-WantedBy=multi-user.target
diff --git a/sys-apps/lm_sensors/lm_sensors-3.3.4-r1.ebuild b/sys-apps/lm_sensors/lm_sensors-3.3.4-r1.ebuild
deleted file mode 100644
index 66fc2741908e..000000000000
--- a/sys-apps/lm_sensors/lm_sensors-3.3.4-r1.ebuild
+++ /dev/null
@@ -1,108 +0,0 @@
-# Copyright 1999-2015 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=5
-
-inherit eutils linux-info multilib systemd toolchain-funcs
-
-DESCRIPTION="Hardware Monitoring user-space utilities"
-HOMEPAGE="http://www.lm-sensors.org/"
-SRC_URI="http://dl.lm-sensors.org/lm-sensors/releases/${P}.tar.bz2"
-
-LICENSE="GPL-2 LGPL-2.1"
-SLOT="0"
-KEYWORDS="alpha amd64 ~arm ~mips ppc ppc64 sparc x86 ~amd64-linux ~arm-linux ~x86-linux"
-IUSE="sensord static-libs"
-
-RDEPEND="
-	dev-lang/perl
-	sensord? (
-		net-analyzer/rrdtool
-		virtual/logger
-		)"
-DEPEND="${RDEPEND}
-	sys-devel/bison
-	sys-devel/flex"
-
-CONFIG_CHECK="~HWMON ~I2C_CHARDEV ~I2C"
-WARNING_HWMON="${PN} requires CONFIG_HWMON to be enabled for use."
-WARNING_I2C_CHARDEV="sensors-detect requires CONFIG_I2C_CHARDEV to be enabled."
-WARNING_I2C="${PN} requires CONFIG_I2C to be enabled for most sensors."
-
-src_prepare() {
-	epatch "${FILESDIR}"/${P}-sensors-detect-gentoo.patch
-
-	use sensord && { sed -i -e 's:^#\(PROG_EXTRA.*\):\1:' Makefile || die; }
-
-	# Respect LDFLAGS
-	sed -i -e 's/\$(LIBDIR)$/\$(LIBDIR) \$(LDFLAGS)/g' Makefile || die
-
-	# Fix shipped unit file paths
-	sed -i -e 's:\(^EnvironmentFile=\).*:\1/etc/conf.d/lm_sensors:' \
-		prog/init/lm_sensors.service || die
-
-	use static-libs || { sed -i -e '/^BUILD_STATIC_LIB/d' Makefile || die; }
-}
-
-src_compile() {
-	einfo
-	einfo "You may safely ignore any errors from compilation"
-	einfo "that contain \"No such file or directory\" references."
-	einfo
-
-	emake CC="$(tc-getCC)"
-}
-
-src_install() {
-	emake \
-		DESTDIR="${D}" \
-		PREFIX="${EPREFIX}/usr" \
-		MANDIR="${EPREFIX}/usr/share/man" \
-		ETCDIR="${EPREFIX}/etc" \
-		LIBDIR="${EPREFIX}/usr/$(get_libdir)" \
-		install
-
-	newinitd "${FILESDIR}"/${PN}-3-init.d ${PN}
-	systemd_dounit prog/init/lm_sensors.service
-
-	newinitd "${FILESDIR}"/fancontrol-init.d-2 fancontrol
-	systemd_dounit "${FILESDIR}"/fancontrol.service
-
-	if use sensord; then
-		newconfd "${FILESDIR}"/sensord-conf.d sensord
-		newinitd "${FILESDIR}"/sensord-4-init.d sensord
-		systemd_dounit "${FILESDIR}"/sensord.service
-	fi
-
-	dodoc CHANGES CONTRIBUTORS INSTALL README \
-		doc/{donations,fancontrol.txt,fan-divisors,libsensors-API.txt,progs,temperature-sensors,vid}
-
-	docinto developers
-	dodoc doc/developers/applications
-}
-
-pkg_postinst() {
-	echo
-	elog "Please run \`/usr/sbin/sensors-detect' in order to setup"
-	elog "/etc/conf.d/${PN}."
-	echo
-	elog "/etc/conf.d/${PN} is vital to the init-script."
-	elog "Please make sure you also add ${PN} to the desired"
-	elog "runlevel. Otherwise your I2C modules won't get loaded"
-	elog "on the next startup."
-	echo
-	elog "You will also need to run the above command if you're upgrading from"
-	elog "<=${PN}-2, as the needed entries in /etc/conf.d/${PN} has"
-	elog "changed."
-	echo
-	elog "Be warned, the probing of hardware in your system performed by"
-	elog "sensors-detect could freeze your system. Also make sure you read"
-	elog "the documentation before running ${PN} on IBM ThinkPads."
-	echo
-	elog "Also make sure you have read:"
-	elog "http://www.lm-sensors.org/wiki/FAQ/Chapter3#Mysensorshavestoppedworkinginkernel2.6.31"
-	echo
-	elog "Please refer to the ${PN} documentation for more information."
-	elog "(http://www.lm-sensors.org/wiki/Documentation)"
-	echo
-}
diff --git a/sys-apps/lm_sensors/lm_sensors-3.3.5.ebuild b/sys-apps/lm_sensors/lm_sensors-3.3.5.ebuild
deleted file mode 100644
index 5d6d9242a943..000000000000
--- a/sys-apps/lm_sensors/lm_sensors-3.3.5.ebuild
+++ /dev/null
@@ -1,108 +0,0 @@
-# Copyright 1999-2015 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=5
-
-inherit eutils linux-info multilib systemd toolchain-funcs
-
-DESCRIPTION="Hardware Monitoring user-space utilities"
-HOMEPAGE="http://www.lm-sensors.org/"
-SRC_URI="http://dl.lm-sensors.org/lm-sensors/releases/${P}.tar.bz2"
-
-LICENSE="GPL-2 LGPL-2.1"
-SLOT="0"
-KEYWORDS="alpha amd64 arm ~mips ppc ppc64 sparc x86 ~amd64-linux ~arm-linux ~x86-linux"
-IUSE="sensord static-libs"
-
-RDEPEND="
-	dev-lang/perl
-	sensord? (
-		net-analyzer/rrdtool
-		virtual/logger
-		)"
-DEPEND="${RDEPEND}
-	sys-devel/bison
-	sys-devel/flex"
-
-CONFIG_CHECK="~HWMON ~I2C_CHARDEV ~I2C"
-WARNING_HWMON="${PN} requires CONFIG_HWMON to be enabled for use."
-WARNING_I2C_CHARDEV="sensors-detect requires CONFIG_I2C_CHARDEV to be enabled."
-WARNING_I2C="${PN} requires CONFIG_I2C to be enabled for most sensors."
-
-src_prepare() {
-	epatch "${FILESDIR}"/${P}-sensors-detect-gentoo.patch
-
-	use sensord && { sed -i -e 's:^#\(PROG_EXTRA.*\):\1:' Makefile || die; }
-
-	# Respect LDFLAGS
-	sed -i -e 's/\$(LIBDIR)$/\$(LIBDIR) \$(LDFLAGS)/g' Makefile || die
-
-	# Fix shipped unit file paths
-	sed -i -e 's:\(^EnvironmentFile=\).*:\1/etc/conf.d/lm_sensors:' \
-		prog/init/lm_sensors.service || die
-
-	use static-libs || { sed -i -e '/^BUILD_STATIC_LIB/d' Makefile || die; }
-}
-
-src_compile() {
-	einfo
-	einfo "You may safely ignore any errors from compilation"
-	einfo "that contain \"No such file or directory\" references."
-	einfo
-
-	emake CC="$(tc-getCC)"
-}
-
-src_install() {
-	emake \
-		DESTDIR="${D}" \
-		PREFIX="${EPREFIX}/usr" \
-		MANDIR="${EPREFIX}/usr/share/man" \
-		ETCDIR="${EPREFIX}/etc" \
-		LIBDIR="${EPREFIX}/usr/$(get_libdir)" \
-		install
-
-	newinitd "${FILESDIR}"/${PN}-3-init.d ${PN}
-	systemd_dounit prog/init/lm_sensors.service
-
-	newinitd "${FILESDIR}"/fancontrol-init.d-2 fancontrol
-	systemd_dounit "${FILESDIR}"/fancontrol.service
-
-	if use sensord; then
-		newconfd "${FILESDIR}"/sensord-conf.d sensord
-		newinitd "${FILESDIR}"/sensord-4-init.d sensord
-		systemd_dounit "${FILESDIR}"/sensord.service
-	fi
-
-	dodoc CHANGES CONTRIBUTORS INSTALL README \
-		doc/{donations,fancontrol.txt,fan-divisors,libsensors-API.txt,progs,temperature-sensors,vid}
-
-	docinto developers
-	dodoc doc/developers/applications
-}
-
-pkg_postinst() {
-	echo
-	elog "Please run \`/usr/sbin/sensors-detect' in order to setup"
-	elog "/etc/conf.d/${PN}."
-	echo
-	elog "/etc/conf.d/${PN} is vital to the init-script."
-	elog "Please make sure you also add ${PN} to the desired"
-	elog "runlevel. Otherwise your I2C modules won't get loaded"
-	elog "on the next startup."
-	echo
-	elog "You will also need to run the above command if you're upgrading from"
-	elog "<=${PN}-2, as the needed entries in /etc/conf.d/${PN} has"
-	elog "changed."
-	echo
-	elog "Be warned, the probing of hardware in your system performed by"
-	elog "sensors-detect could freeze your system. Also make sure you read"
-	elog "the documentation before running ${PN} on IBM ThinkPads."
-	echo
-	elog "Also make sure you have read:"
-	elog "http://www.lm-sensors.org/wiki/FAQ/Chapter3#Mysensorshavestoppedworkinginkernel2.6.31"
-	echo
-	elog "Please refer to the ${PN} documentation for more information."
-	elog "(http://www.lm-sensors.org/wiki/Documentation)"
-	echo
-}
diff --git a/sys-apps/lm_sensors/lm_sensors-3.4.0.ebuild b/sys-apps/lm_sensors/lm_sensors-3.4.0.ebuild
deleted file mode 100644
index 3f0943216e6a..000000000000
--- a/sys-apps/lm_sensors/lm_sensors-3.4.0.ebuild
+++ /dev/null
@@ -1,108 +0,0 @@
-# Copyright 1999-2015 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=5
-
-inherit eutils linux-info multilib systemd toolchain-funcs
-
-DESCRIPTION="Hardware Monitoring user-space utilities"
-HOMEPAGE="http://www.lm-sensors.org/"
-SRC_URI="http://dl.lm-sensors.org/lm-sensors/releases/${P}.tar.bz2"
-
-LICENSE="GPL-2 LGPL-2.1"
-SLOT="0"
-KEYWORDS="~alpha ~amd64 ~arm ~mips ~ppc ~ppc64 ~sparc ~x86 ~amd64-linux ~arm-linux ~x86-linux"
-IUSE="sensord static-libs"
-
-RDEPEND="
-	dev-lang/perl
-	sensord? (
-		net-analyzer/rrdtool
-		virtual/logger
-		)"
-DEPEND="${RDEPEND}
-	sys-devel/bison
-	sys-devel/flex"
-
-CONFIG_CHECK="~HWMON ~I2C_CHARDEV ~I2C"
-WARNING_HWMON="${PN} requires CONFIG_HWMON to be enabled for use."
-WARNING_I2C_CHARDEV="sensors-detect requires CONFIG_I2C_CHARDEV to be enabled."
-WARNING_I2C="${PN} requires CONFIG_I2C to be enabled for most sensors."
-
-src_prepare() {
-	epatch "${FILESDIR}"/${PN}-3.3.5-sensors-detect-gentoo.patch
-
-	use sensord && { sed -i -e 's:^#\(PROG_EXTRA.*\):\1:' Makefile || die; }
-
-	# Respect LDFLAGS
-	sed -i -e 's/\$(LIBDIR)$/\$(LIBDIR) \$(LDFLAGS)/g' Makefile || die
-
-	# Fix shipped unit file paths
-	sed -i -e 's:\(^EnvironmentFile=\).*:\1/etc/conf.d/lm_sensors:' \
-		prog/init/lm_sensors.service || die
-
-	use static-libs || { sed -i -e '/^BUILD_STATIC_LIB/d' Makefile || die; }
-}
-
-src_compile() {
-	einfo
-	einfo "You may safely ignore any errors from compilation"
-	einfo "that contain \"No such file or directory\" references."
-	einfo
-
-	emake CC="$(tc-getCC)"
-}
-
-src_install() {
-	emake \
-		DESTDIR="${D}" \
-		PREFIX="${EPREFIX}/usr" \
-		MANDIR="${EPREFIX}/usr/share/man" \
-		ETCDIR="${EPREFIX}/etc" \
-		LIBDIR="${EPREFIX}/usr/$(get_libdir)" \
-		install
-
-	newinitd "${FILESDIR}"/${PN}-3-init.d ${PN}
-	systemd_dounit prog/init/lm_sensors.service
-
-	newinitd "${FILESDIR}"/fancontrol-init.d-2 fancontrol
-	systemd_dounit "${FILESDIR}"/fancontrol.service
-
-	if use sensord; then
-		newconfd "${FILESDIR}"/sensord-conf.d sensord
-		newinitd "${FILESDIR}"/sensord-4-init.d sensord
-		systemd_dounit "${FILESDIR}"/sensord.service
-	fi
-
-	dodoc CHANGES CONTRIBUTORS INSTALL README \
-		doc/{donations,fancontrol.txt,fan-divisors,libsensors-API.txt,progs,temperature-sensors,vid}
-
-	docinto developers
-	dodoc doc/developers/applications
-}
-
-pkg_postinst() {
-	echo
-	elog "Please run \`/usr/sbin/sensors-detect' in order to setup"
-	elog "/etc/conf.d/${PN}."
-	echo
-	elog "/etc/conf.d/${PN} is vital to the init-script."
-	elog "Please make sure you also add ${PN} to the desired"
-	elog "runlevel. Otherwise your I2C modules won't get loaded"
-	elog "on the next startup."
-	echo
-	elog "You will also need to run the above command if you're upgrading from"
-	elog "<=${PN}-2, as the needed entries in /etc/conf.d/${PN} has"
-	elog "changed."
-	echo
-	elog "Be warned, the probing of hardware in your system performed by"
-	elog "sensors-detect could freeze your system. Also make sure you read"
-	elog "the documentation before running ${PN} on IBM ThinkPads."
-	echo
-	elog "Also make sure you have read:"
-	elog "http://www.lm-sensors.org/wiki/FAQ/Chapter3#Mysensorshavestoppedworkinginkernel2.6.31"
-	echo
-	elog "Please refer to the ${PN} documentation for more information."
-	elog "(http://www.lm-sensors.org/wiki/Documentation)"
-	echo
-}