dev-embedded/openocd: Remove old

Signed-off-by: Jakov Smolic <jakov.smolic@sartura.hr>
Signed-off-by: David Seifert <soap@gentoo.org>

1 files changed, 0 insertions, 142 deletions

diff --git a/dev-embedded/openocd/openocd-0.10.0.ebuild b/dev-embedded/openocd/openocd-0.10.0.ebuild
deleted file mode 100644
index 671c16ab48f7..000000000000
--- a/dev-embedded/openocd/openocd-0.10.0.ebuild
+++ /dev/null
@@ -1,142 +0,0 @@
-# Copyright 1999-2019 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI="5"
-
-inherit eutils multilib flag-o-matic toolchain-funcs udev
-
-# One ebuild to rule them all
-if [[ ${PV} == *9999 ]] ; then
-	inherit autotools git-r3
-	EGIT_REPO_URI="https://git.code.sf.net/p/${PN}/code"
-else
-	MY_PV="${PV/_/-}"
-	MY_P="${PN}-${MY_PV}"
-	S="${WORKDIR}"/${MY_P}
-	KEYWORDS="amd64 ~arm x86"
-	SRC_URI="mirror://sourceforge/project/${PN}/${PN}/${MY_PV}/${MY_P}.tar.gz"
-fi
-
-DESCRIPTION="OpenOCD - Open On-Chip Debugger"
-HOMEPAGE="http://openocd.sourceforge.net"
-
-LICENSE="GPL-2+"
-SLOT="0"
-IUSE="+cmsis-dap dummy +ftdi +jlink parport +usb verbose-io"
-RESTRICT="strip" # includes non-native binaries
-
-RDEPEND="
-	acct-group/plugdev
-	>=dev-lang/jimtcl-0.76
-	cmsis-dap? ( dev-libs/hidapi )
-	jlink? ( dev-embedded/libjaylink )
-	usb? (
-		virtual/libusb:0
-		virtual/libusb:1
-	)
-	ftdi? ( dev-embedded/libftdi:= )"
-
-DEPEND="${RDEPEND}
-	virtual/pkgconfig"
-[[ ${PV} == "9999" ]] && DEPEND+=" >=sys-apps/texinfo-5" #549946
-
-src_prepare() {
-	epatch_user
-
-	if [[ ${PV} == "9999" ]] ; then
-		AT_NO_RECURSIVE=yes eautoreconf
-	fi
-}
-
-src_configure() {
-	# Here are some defaults
-	local myconf=(
-		--enable-buspirate
-		--disable-werror
-		--disable-internal-jimtcl
-		--disable-internal-libjaylink
-		--enable-amtjtagaccel
-		--enable-ep93xx
-		--enable-at91rm9200
-		--enable-gw16012
-		--enable-arm-jtag-ew
-		--enable-sysfsgpio
-		--enable-bcm2835gpio
-	)
-
-	# Adapters requiring usb/libusb-1.X support
-	if use usb; then
-		myconf+=(
-			--enable-aice
-			--enable-usb-blaster-2
-			--enable-ftdi
-			--enable-ti-icdi
-			--enable-ulink
-			--enable-osbdm
-			--enable-opendous
-			--enable-usbprog
-			--enable-rlink
-			--enable-stlink
-			--enable-vsllink
-			--enable-armjtagew
-			$(use_enable verbose-io verbose-usb-io)
-			$(use_enable verbose-io verbose_usb_comms)
-		)
-	else
-		myconf+=(
-			--disable-aice
-			--disable-usb-blaster-2
-			--disable-ftdi
-			--disable-ti-icdi
-			--disable-ulink
-			--disable-osbdm
-			--disable-opendous
-			--disable-usbprog
-			--disable-rlink
-			--disable-stlink
-			--disable-vsllink
-			--disable-armjtagew
-		)
-	fi
-
-	if use jlink; then
-		myconf+=(
-			--enable-jlink
-		)
-	else
-		myconf+=(
-			--disable-jlink
-		)
-	fi
-
-	if use ftdi; then
-		myconf+=(
-			--enable-usb-blaster
-			--enable-openjtag
-			--enable-presto
-		)
-	else
-		myconf+=(
-			--disable-openjtag
-			--disable-presto
-			--disable-usb-blaster
-		)
-	fi
-
-	econf \
-		$(use_enable dummy) \
-		$(use_enable cmsis-dap) \
-		$(use_enable parport) \
-		$(use_enable parport parport_ppdev) \
-		$(use_enable verbose-io verbose-jtag-io) \
-		"${myconf[@]}"
-}
-
-src_install() {
-	default
-	udev_dorules "${D}"/usr/share/${PN}/contrib/*.rules
-}
-
-pkg_postinst() {
-	elog "To access openocd devices as user you must be in the plugdev group"
-}