net-analyzer/munin: drop 2.0.69-r1, 2.0.74

Signed-off-by: Hans de Graaff <graaff@gentoo.org>

3 files changed, 0 insertions, 842 deletions

diff --git a/net-analyzer/munin/Manifest b/net-analyzer/munin/Manifest
index c3770e9ad849..6f2459e3e401 100644
--- a/net-analyzer/munin/Manifest
+++ b/net-analyzer/munin/Manifest
@@ -1,7 +1,3 @@
-DIST munin-2.0.69-gentoo-1.tar.xz 3980 BLAKE2B 5aae9c29befa761f797d362c90d810051a7f3a5dc8250776ab6ae1659197d795dfb87274db66ff0a3deb4e10e14ced5b3765551a3f29357c436968a848f450ea SHA512 b21d6590bb9e1da127066a06818f1f3157362762f80526e2231b926956959e62af575f38235f72326376dc21bba63f9767efa379f1f2558ca9b20ddf5395e851
-DIST munin-2.0.69.tar.gz 2258024 BLAKE2B 2d270f6f67fc9a86a592e2b7cbcf4111d6ae40bf1928b0ad0adb99ad32384810e5768c17019f9163e8b22fd8524b28257df527df023db9c1ba333691b384dd74 SHA512 4976e394e046d3fe1cbb000acdf081060188517e09abcf8b60dd7c55e0e1cdf46e33d1760368cb1423dfb9286e397df2072a2c55ba8b79adeae4ea2303130667
 DIST munin-2.0.73.tar.gz 2259959 BLAKE2B 2d2e4ce00b2df06f083280b9253f875ded100e42c991152f3f8e4b39e85d605367efc18df369e07e18eac38aabd78faa959c367752b153f97246bb47a9732f20 SHA512 4f1d59ff3f163c8fac883973ebba1221619d716c4cde506d9265544c52e73f43e8b587cda3fd00bcf779ceeaf8fef6e7780d9ea4be5b99894f0bb5047f24b935
-DIST munin-2.0.74.tar.gz 2258466 BLAKE2B a993c97d1f2c3aec8c3970e75d0406ce8b5a56eb54c729cdd97c4fbd38190dc474336b9faf06881b4f293a72c4181e8138edefc51da548c179c082869d966f34 SHA512 ad75100576b74d1d75bb7f204975ce683c88aadb668d61feabc6652d5dc0495af4f94a9e8d485a242dbc178f003be91ec72c350b35186d9410035f1c8688f97b
 DIST munin-2.0.75.tar.gz 2258514 BLAKE2B 689b436913a931c9002757267db236ba4ab1da947552c43ad2b96c2e5b26427499e681d0606d0045cfbbd90b70a69572b8550660a598d672babeba8388feacf5 SHA512 cceb47c27bfb3080980fd6342e805b5b9fecbef7033d6f2a83fe6c78d20f943961c9f1775ef5e464e49c25c9d246606594f2844827b38d34c04016f15dd68613
 DIST munin-2.0.76.tar.gz 2258538 BLAKE2B 74d8d055be52f605b2d0f2551328bd425e9550a7dd86740479f7a6efd9a9d8be7a78b4075fe68a9c658981b2089d6277eb51b758fb8ba341c149117457ab4696 SHA512 e43d8f123cb6bf9a1b99dde4fe93440e256b3950ec1f79923998f83b14530bba24dab87ece1d3e7e5bf3afd645eafa6c1055d1119748e76230cfb29136712086
-DIST munin-remove-Date-Manip-DM5.patch 3587 BLAKE2B fab1fb61607e83aac5cbd699c93015d77ca6e58d9734a5a6bc17af6c3c7695ddf4257104cd69db4d3b3e1d36bb1d66a1893ddb51bfc52d0a1dd2efb3ba32a9c0 SHA512 976d7a50de6437a26fa77917368ab604c1987f686030e097c200fe9ebebd08e5fae10c04640cadbfecef90eda76ba123cf303d2d671cefa78b09752d1f6757af
diff --git a/net-analyzer/munin/munin-2.0.69-r1.ebuild b/net-analyzer/munin/munin-2.0.69-r1.ebuild
deleted file mode 100644
index a2e3e857ae21..000000000000
--- a/net-analyzer/munin/munin-2.0.69-r1.ebuild
+++ /dev/null
@@ -1,420 +0,0 @@
-# Copyright 1999-2022 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-PATCHSET=1
-
-inherit java-pkg-opt-2 systemd tmpfiles
-
-MY_P=${P/_/-}
-
-DESCRIPTION="Munin Server Monitoring Tool"
-HOMEPAGE="https://munin-monitoring.org/"
-SRC_URI="
-	https://github.com/munin-monitoring/munin/archive/${PV}.tar.gz -> ${P}.tar.gz
-	https://dev.gentoo.org/~graaff/munin/${P}-gentoo-${PATCHSET}.tar.xz
-	https://github.com/munin-monitoring/munin/commit/47a2ea75899a6395a80918d043a21d61fe712b44.patch -> munin-remove-Date-Manip-DM5.patch
-	"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="amd64 arm arm64 ppc ~ppc64 x86"
-IUSE="asterisk irc java ldap memcached minimal mysql postgres selinux ssl test cgi ipv6 syslog ipmi http dhcpd doc apache2"
-REQUIRED_USE="cgi? ( !minimal ) apache2? ( cgi )"
-RESTRICT="!test? ( test )"
-
-# Upstream's listing of required modules is NOT correct!
-# Some of the postgres plugins use DBD::Pg, while others call psql directly.
-# Some of the mysql plugins use DBD::mysql, while others call mysqladmin directly.
-# We replace the original ipmi plugins with the freeipmi_ plugin which at least works.
-DEPEND_COM="
-	acct-user/munin
-	acct-user/munin-async
-	acct-group/munin
-	dev-lang/perl:=[berkdb]
-	dev-perl/DBI
-	dev-perl/File-Copy-Recursive
-	dev-perl/List-MoreUtils
-	dev-perl/Log-Log4perl
-	dev-perl/Net-CIDR
-	dev-perl/Net-DNS
-	dev-perl/Net-Netmask
-	dev-perl/Net-SNMP
-	dev-perl/Net-Server[ipv6(-)?]
-	dev-perl/TimeDate
-	virtual/perl-Digest-MD5
-	virtual/perl-Getopt-Long
-	virtual/perl-MIME-Base64
-	virtual/perl-Storable
-	virtual/perl-Text-Balanced
-	virtual/perl-Time-HiRes
-	apache2? ( www-servers/apache[apache2_modules_cgi,apache2_modules_cgid,apache2_modules_rewrite] )
-	asterisk? ( dev-perl/Net-Telnet )
-	cgi? (
-		dev-perl/FCGI
-		dev-perl/CGI-Fast
-		)
-	dhcpd? (
-		>=net-misc/dhcp-3[server]
-		dev-perl/Net-IP
-		dev-perl/HTTP-Date
-		)
-	doc? ( dev-python/sphinx )
-	http? ( dev-perl/libwww-perl )
-	irc? ( dev-perl/Net-IRC )
-	ldap? ( dev-perl/perl-ldap )
-	kernel_linux? ( sys-process/procps )
-	memcached? ( dev-perl/Cache-Memcached )
-	mysql? (
-		virtual/mysql
-		dev-perl/Cache-Cache
-		dev-perl/DBD-mysql
-		)
-	postgres? ( dev-perl/DBD-Pg dev-db/postgresql:* )
-	ssl? ( dev-perl/Net-SSLeay )
-	syslog? ( virtual/perl-Sys-Syslog )
-	!minimal? (
-		dev-perl/HTML-Template
-		dev-perl/IO-Socket-INET6
-		dev-perl/URI
-		>=net-analyzer/rrdtool-1.3[graph,perl]
-		virtual/ssh
-		)
-	"
-
-# Keep this seperate, as previous versions have had other deps here
-DEPEND="${DEPEND_COM}
-	dev-perl/Module-Build
-	java? ( >=virtual/jdk-1.8 )
-	test? (
-		dev-perl/Test-Deep
-		dev-perl/Test-Exception
-		dev-perl/Test-LongString
-		dev-perl/Test-Differences
-		dev-perl/Test-MockModule
-		dev-perl/Test-MockObject
-		dev-perl/File-Slurp
-		dev-perl/IO-stringy
-		dev-perl/IO-Socket-INET6
-	)"
-RDEPEND="${DEPEND_COM}
-		app-alternatives/awk
-		ipmi? ( >=sys-libs/freeipmi-1.1.6-r1 )
-		java? (
-			>=virtual/jre-1.8:*
-			|| ( net-analyzer/netcat net-analyzer/openbsd-netcat )
-		)
-		!minimal? (
-			virtual/cron
-			media-fonts/dejavu
-		)
-		selinux? ( sec-policy/selinux-munin )"
-
-S="${WORKDIR}/${MY_P}"
-
-pkg_setup() {
-	java-pkg-opt-2_pkg_setup
-}
-
-src_prepare() {
-	echo ${PV} > RELEASE || die
-
-	eapply "${WORKDIR}"/patches/*.patch
-	# Quick hack to make the munin-remove-Date-Manip-DM5.patch apply
-	sed -i -e '/^BEGIN/,/Date::Manip::Backend/{ /no warnings;/d  }' "${S}"/master/_bin/munin-cgi-graph.in
-	eapply "${DISTDIR}"/munin-remove-Date-Manip-DM5.patch
-
-	eapply_user
-
-	java-pkg-opt-2_src_prepare
-}
-
-src_configure() {
-	local cgidir='$(DESTDIR)/usr/libexec/munin/cgi'
-	use cgi || cgidir="${T}/useless/cgi-bin"
-
-	local cgiuser=$(usex apache2 apache munin)
-
-	cat >> "${S}"/Makefile.config <<- EOF || die
-	PREFIX=\$(DESTDIR)/usr
-	CONFDIR=\$(DESTDIR)/etc/munin
-	DOCDIR=${T}/useless/doc
-	MANDIR=\$(PREFIX)/share/man
-	LIBDIR=\$(PREFIX)/libexec/munin
-	HTMLDIR=\$(DESTDIR)/var/www/localhost/htdocs/munin
-	CGIDIR=${cgidir}
-	CGITMPDIR=\$(DESTDIR)/var/cache/munin-cgi
-	CGIUSER=${cgiuser}
-	DBDIR=\$(DESTDIR)/var/lib/munin
-	DBDIRNODE=\$(DESTDIR)/var/lib/munin-node
-	SPOOLDIR=\$(DESTDIR)/var/spool/munin-async
-	LOGDIR=\$(DESTDIR)/var/log/munin
-	PERLLIB=\$(DESTDIR)$(perl -V:vendorlib | cut -d"'" -f2)
-	JCVALID=$(usex java yes no)
-	STATEDIR=\$(DESTDIR)/run/munin
-	EOF
-}
-
-# parallel make and install need to be fixed before, and I haven't
-# gotten around to do so yet.
-src_compile() {
-	emake -j1
-	use doc && emake -C doc html
-}
-
-src_test() {
-	if [[ ${EUID} == 0 ]]; then
-		eerror "You cannot run tests as root."
-		eerror "Please enable FEATURES=userpriv before proceeding."
-		return 1
-	fi
-
-	local testtargets="test-common test-node test-plugins"
-	use minimal || testtargets+=" test-master"
-
-	LC_ALL=C emake -j1 ${testtargets}
-}
-
-src_install() {
-	local dirs="
-		/var/log/munin
-		/var/lib/munin/plugin-state
-		/var/lib/munin-node/plugin-state
-		/var/www/localhost/htdocs/munin
-		/etc/munin/plugin-conf.d
-		/etc/munin/plugins"
-	use minimal || dirs+=" /etc/munin/munin-conf.d/"
-
-	keepdir ${dirs}
-	fowners munin:munin ${dirs}
-
-	# parallel install doesn't work and it's also pointless to have this
-	# run in parallel for now (because it uses internal loops).
-	emake -j1 CHOWN=true DESTDIR="${D}" $(usex minimal "install-minimal install-man" install)
-
-	# we remove /run from the install, as it's not the package's to deal
-	# with.
-	rm -rf "${D}"/run || die
-
-	# remove the plugins for non-Gentoo package managers; use -f so that
-	# it doesn't fail when installing on non-Linux platforms.
-	rm -f "${D}"/usr/libexec/munin/plugins/{apt{,_all},yum} || die
-
-	insinto /etc/munin/plugin-conf.d/
-	newins "${FILESDIR}"/${PN}-1.3.2-plugins.conf munin-node
-
-	newinitd "${FILESDIR}"/munin-node_init.d_2.0.19 munin-node
-	newconfd "${FILESDIR}"/munin-node_conf.d_1.4.6-r2 munin-node
-
-	newinitd "${FILESDIR}"/munin-asyncd.init.2 munin-asyncd
-
-	newtmpfiles - ${CATEGORY}:${PN}:${SLOT}.conf <<-EOF || die
-	d /run/munin 0700 munin munin - -
-	EOF
-
-	systemd_dounit "${FILESDIR}"/munin-async.service
-	systemd_dounit "${FILESDIR}"/munin-graph.{service,socket}
-	systemd_dounit "${FILESDIR}"/munin-html.{service,socket}
-	systemd_dounit "${FILESDIR}"/munin-node.service
-
-	cat >> "${T}"/munin.env <<- EOF
-	CONFIG_PROTECT=/var/spool/munin-async/.ssh
-	EOF
-	newenvd "${T}"/munin.env 50munin
-
-	dodoc README ChangeLog INSTALL
-	if use doc; then
-		cd "${S}"/doc/_build/html || die
-		docinto html
-		dodoc -r *
-		cd "${S}" || die
-	fi
-
-	dodir /etc/logrotate.d/
-	sed -e "s:@CGIUSER@:$(usex apache2 apache munin):g" \
-		"${FILESDIR}"/logrotate.d-munin.3 > "${D}"/etc/logrotate.d/munin
-
-	dosym ipmi_ /usr/libexec/munin/plugins/ipmi_sensor_
-
-	if use syslog; then
-		sed -i -e '/log_file/s| .*| Sys::Syslog|' \
-			"${D}"/etc/munin/munin-node.conf || die
-	fi
-
-	# Use a simpler pid file to avoid trouble with /run in tmpfs. The
-	# munin-node service is ran as user root, and only later drops
-	# privileges.
-	sed -i -e 's:/run/munin/munin-node.pid:/run/munin-node.pid:' \
-		"${D}"/etc/munin/munin-node.conf || die
-
-	keepdir /var/spool/munin-async/.ssh
-	touch "${D}"/var/spool/munin-async/.ssh/authorized_keys
-	fowners munin-async:munin /var/spool/munin-async{,/.ssh/{,authorized_keys}}
-	fperms 0750 /var/spool/munin-async{,/.ssh}
-	fperms 0600 /var/spool/munin-async/.ssh/authorized_keys
-
-	if use minimal; then
-		# This requires the presence of munin-update, which is part of
-		# the non-minimal install...
-		rm "${D}"/usr/libexec/munin/plugins/munin_stats
-	else
-		# remove font files so that we don't have to keep them around
-		rm "${D}"/usr/libexec/${PN}/*.ttf || die
-
-		if use cgi; then
-			sed -i -e '/#graph_strategy cgi/s:^#::' "${D}"/etc/munin/munin.conf || die
-
-			touch "${D}"/var/log/munin/munin-cgi-{graph,html}.log
-			fowners $(usex apache2 apache munin) \
-				/var/log/munin/munin-cgi-{graph,html}.log
-
-			if use apache2; then
-				insinto /etc/apache2/vhosts.d
-				newins "${FILESDIR}"/munin.apache.include munin.include
-				newins "${FILESDIR}"/munin.apache.include-2.4 munin-2.4.include
-			fi
-		else
-			sed \
-				-e '/#graph_strategy cgi/s:#graph_strategy cgi:graph_strategy cron:' \
-				-i "${D}"/etc/munin/munin.conf || die
-		fi
-
-		keepdir /var/lib/munin/.ssh
-		cat >> "${D}"/var/lib/munin/.ssh/config <<- EOF
-		IdentityFile /var/lib/munin/.ssh/id_ecdsa
-		IdentityFile /var/lib/munin/.ssh/id_rsa
-		EOF
-
-		fowners munin:munin /var/lib/munin/.ssh/{,config}
-		fperms go-rwx /var/lib/munin/.ssh/{,config}
-
-		dodir /usr/share/${PN}
-		cat >> "${D}"/usr/share/${PN}/crontab <<- EOF
-		# Force the shell to bash
-		SHELL=/bin/bash
-		# Mail reports to root@, not munin@
-		MAILTO=root
-
-		# This runs the munin task every 5 minutes.
-		*/5	* * * *		/usr/bin/munin-cron
-
-		# Alternatively, this route works differently
-		# Update once a minute (for busy sites)
-		#*/1 * * * *		/usr/libexec/munin/munin-update
-		## Check for limit excess every 2 minutes
-		#*/2 * * * *		/usr/libexec/munin/munin-limits
-		## Update graphs every 5 minutes
-		#*/5 * * * *		nice /usr/libexec/munin/munin-graph
-		## Update HTML pages every 15 minutes
-		#*/15 * * * *		nice /usr/libexec/munin/munin-html
-		EOF
-
-		cat >> "${D}"/usr/share/${PN}/fcrontab <<- EOF
-		# Mail reports to root@, not munin@, only execute one at a time
-		!mailto(root),serial(true)
-
-		# This runs the munin task every 5 minutes.
-		@ 5		/usr/bin/munin-cron
-
-		# Alternatively, this route works differently
-		# Update once a minute (for busy sites)
-		#@ 1	/usr/libexec/munin/munin-update
-		## Check for limit excess every 2 minutes
-		#@ 2	/usr/libexec/munin/munin-limits
-		## Update graphs every 5 minutes
-		#@ 5	nice /usr/libexec/munin/munin-graph
-		## Update HTML pages every 15 minutes
-		#@ 15	nice /usr/libexec/munin/munin-html
-		EOF
-
-		# remove .htaccess file
-		find "${D}" -name .htaccess -delete || die
-	fi
-}
-
-pkg_config() {
-	if use minimal; then
-		einfo "Nothing to do."
-		return 0
-	fi
-
-	einfo "Press enter to install the default crontab for the munin master"
-	einfo "installation from /usr/share/${PN}/f?crontab"
-	einfo "If you have a large site, you may wish to customize it."
-	read
-
-	ebegin "Setting up cron ..."
-	if has_version sys-process/fcron; then
-		fcrontab - -u munin < /usr/share/${PN}/fcrontab
-	else
-		# dcron is very fussy about syntax
-		# the following is the only form that works in BOTH dcron and vixie-cron
-		crontab - -u munin < /usr/share/${PN}/crontab
-	fi
-	eend $?
-
-	einfo "Press enter to set up the SSH keys used for SSH transport"
-	read
-
-	# generate one rsa (for legacy) and one ecdsa (for new systems)
-	ssh-keygen -t rsa \
-		-f /var/lib/munin/.ssh/id_rsa -N '' \
-		-C "created by portage for ${CATEGORY}/${PN}" || die
-	ssh-keygen -t ecdsa \
-		-f /var/lib/munin/.ssh/id_ecdsa -N '' \
-		-C "created by portage for ${CATEGORY}/${PN}" || die
-	chown -R munin:munin /var/lib/munin/.ssh || die
-	chmod 0600 /var/lib/munin/.ssh/id_{rsa,ecdsa} || die
-
-	einfo "Your public keys are available in "
-	einfo "  /var/lib/munin/.ssh/id_rsa.pub"
-	einfo "  /var/lib/munin/.ssh/id_ecdsa.pub"
-	einfo "and follows for convenience"
-	echo
-	cat /var/lib/munin/.ssh/id_*.pub
-}
-
-pkg_postinst() {
-	tmpfiles_process ${CATEGORY}:${PN}:${SLOT}.conf
-
-	elog "Please follow the munin documentation to set up the plugins you"
-	elog "need, afterwards start munin-node."
-	elog ""
-	elog "To make use of munin-async, make sure to set up the corresponding"
-	elog "SSH key in /var/lib/munin-async/.ssh/authorized_keys"
-	elog ""
-	if ! use minimal; then
-		elog "Please run"
-		elog "  emerge --config net-analyzer/munin"
-		elog "to automatically configure munin's cronjobs as well as generate"
-		elog "passwordless SSH keys to be used with munin-async."
-	fi
-	elog ""
-	elog "Further information about setting up Munin in Gentoo can be found"
-	elog "in the Gentoo Wiki: https://wiki.gentoo.org/wiki/Munin"
-
-	if use cgi; then
-		chown $(usex apache2 apache munin) \
-			"${ROOT}"/var/log/munin/munin-cgi-{graph,html}.log
-
-		if use apache2; then
-			elog "To use Munin with CGI you should include /etc/apache2/vhosts.d/munin.include"
-			elog "or /etc/apache2/vhosts.d/munin-2.4.include (for Apache 2.4) from the virtual"
-			elog "host you want it to be served."
-			elog "If you want to enable CGI-based HTML as well, you have to add to"
-			elog "/etc/conf.d/apache2 the option -D MUNIN_HTML_CGI."
-		else
-			elog "Effective CGI support has just been added in 2.0.7-r6."
-			elog "Documentation on how to use it is still sparse."
-		fi
-	fi
-
-	# we create this here as we don't want Portage to check /run
-	# symlinks but we still need this to be present before the reboot.
-	if ! use minimal && ! [[ -d "${ROOT}"/run/munin ]]; then
-		mkdir "${ROOT}"/run/munin
-		chown munin:munin "${ROOT}"/run/munin
-		chmod 0700 "${ROOT}"/run/munin
-	fi
-}
diff --git a/net-analyzer/munin/munin-2.0.74.ebuild b/net-analyzer/munin/munin-2.0.74.ebuild
deleted file mode 100644
index d81f16efcec8..000000000000
--- a/net-analyzer/munin/munin-2.0.74.ebuild
+++ /dev/null
@@ -1,418 +0,0 @@
-# Copyright 1999-2023 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=8
-
-PATCHSET=1
-
-inherit java-pkg-opt-2 systemd tmpfiles
-
-MY_P=${P/_/-}
-
-DESCRIPTION="Munin Server Monitoring Tool"
-HOMEPAGE="https://munin-monitoring.org/"
-SRC_URI="
-	https://github.com/munin-monitoring/munin/archive/${PV}.tar.gz -> ${P}.tar.gz
-	"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~arm ~arm64 ~ppc ~ppc64 ~x86"
-IUSE="asterisk irc java ldap memcached minimal mysql postgres selinux ssl test cgi ipv6 syslog ipmi http dhcpd doc apache2"
-REQUIRED_USE="cgi? ( !minimal ) apache2? ( cgi )"
-RESTRICT="!test? ( test )"
-
-# Upstream's listing of required modules is NOT correct!
-# Some of the postgres plugins use DBD::Pg, while others call psql directly.
-# Some of the mysql plugins use DBD::mysql, while others call mysqladmin directly.
-# We replace the original ipmi plugins with the freeipmi_ plugin which at least works.
-DEPEND_COM="
-	acct-user/munin
-	acct-user/munin-async
-	acct-group/munin
-	dev-lang/perl:=[berkdb]
-	dev-perl/DBI
-	dev-perl/Date-Manip
-	dev-perl/File-Copy-Recursive
-	dev-perl/List-MoreUtils
-	dev-perl/Log-Log4perl
-	dev-perl/Net-CIDR
-	dev-perl/Net-DNS
-	dev-perl/Net-Netmask
-	dev-perl/Net-SNMP
-	dev-perl/Net-Server[ipv6(-)?]
-	dev-perl/TimeDate
-	virtual/perl-Digest-MD5
-	virtual/perl-Getopt-Long
-	virtual/perl-MIME-Base64
-	virtual/perl-Storable
-	virtual/perl-Text-Balanced
-	virtual/perl-Time-HiRes
-	apache2? ( www-servers/apache[apache2_modules_cgi,apache2_modules_cgid,apache2_modules_rewrite] )
-	asterisk? ( dev-perl/Net-Telnet )
-	cgi? (
-		dev-perl/FCGI
-		dev-perl/CGI-Fast
-		)
-	dhcpd? (
-		>=net-misc/dhcp-3[server]
-		dev-perl/Net-IP
-		dev-perl/HTTP-Date
-		)
-	doc? ( dev-python/sphinx )
-	http? ( dev-perl/libwww-perl )
-	irc? ( dev-perl/Net-IRC )
-	ldap? ( dev-perl/perl-ldap )
-	kernel_linux? ( sys-process/procps )
-	memcached? ( dev-perl/Cache-Memcached )
-	mysql? (
-		virtual/mysql
-		dev-perl/Cache-Cache
-		dev-perl/DBD-mysql
-		)
-	postgres? ( dev-perl/DBD-Pg dev-db/postgresql:* )
-	ssl? ( dev-perl/Net-SSLeay )
-	syslog? ( virtual/perl-Sys-Syslog )
-	!minimal? (
-		dev-perl/HTML-Template
-		dev-perl/IO-Socket-INET6
-		dev-perl/URI
-		>=net-analyzer/rrdtool-1.3[graph,perl]
-		virtual/ssh
-		)
-	"
-
-# Keep this seperate, as previous versions have had other deps here
-DEPEND="${DEPEND_COM}
-	dev-perl/Module-Build
-	java? ( >=virtual/jdk-1.8 )
-	test? (
-		dev-perl/Test-Deep
-		dev-perl/Test-Exception
-		dev-perl/Test-LongString
-		dev-perl/Test-Differences
-		dev-perl/Test-MockModule
-		dev-perl/Test-MockObject
-		dev-perl/File-Slurp
-		dev-perl/IO-stringy
-		dev-perl/IO-Socket-INET6
-	)"
-RDEPEND="${DEPEND_COM}
-		app-alternatives/awk
-		ipmi? ( >=sys-libs/freeipmi-1.1.6-r1 )
-		java? (
-			>=virtual/jre-1.8:*
-			|| ( net-analyzer/netcat net-analyzer/openbsd-netcat )
-		)
-		!minimal? (
-			virtual/cron
-			media-fonts/dejavu
-		)
-		selinux? ( sec-policy/selinux-munin )"
-
-S="${WORKDIR}/${MY_P}"
-
-pkg_setup() {
-	java-pkg-opt-2_pkg_setup
-}
-
-src_prepare() {
-	echo ${PV} > RELEASE || die
-
-	eapply "${FILESDIR}"/patches/*.patch
-
-	eapply_user
-
-	java-pkg-opt-2_src_prepare
-}
-
-src_configure() {
-	local cgidir='$(DESTDIR)/usr/libexec/munin/cgi'
-	use cgi || cgidir="${T}/useless/cgi-bin"
-
-	local cgiuser=$(usex apache2 apache munin)
-
-	cat >> "${S}"/Makefile.config <<- EOF || die
-	PREFIX=\$(DESTDIR)/usr
-	CONFDIR=\$(DESTDIR)/etc/munin
-	DOCDIR=${T}/useless/doc
-	MANDIR=\$(PREFIX)/share/man
-	LIBDIR=\$(PREFIX)/libexec/munin
-	HTMLDIR=\$(DESTDIR)/var/www/localhost/htdocs/munin
-	CGIDIR=${cgidir}
-	CGITMPDIR=\$(DESTDIR)/var/cache/munin-cgi
-	CGIUSER=${cgiuser}
-	DBDIR=\$(DESTDIR)/var/lib/munin
-	DBDIRNODE=\$(DESTDIR)/var/lib/munin-node
-	SPOOLDIR=\$(DESTDIR)/var/spool/munin-async
-	LOGDIR=\$(DESTDIR)/var/log/munin
-	PERLLIB=\$(DESTDIR)$(perl -V:vendorlib | cut -d"'" -f2)
-	JCVALID=$(usex java yes no)
-	STATEDIR=\$(DESTDIR)/run/munin
-	EOF
-}
-
-# parallel make and install need to be fixed before, and I haven't
-# gotten around to do so yet.
-src_compile() {
-	emake -j1
-	use doc && emake -C doc html
-}
-
-src_test() {
-	if [[ ${EUID} == 0 ]]; then
-		eerror "You cannot run tests as root."
-		eerror "Please enable FEATURES=userpriv before proceeding."
-		return 1
-	fi
-
-	local testtargets="test-common test-node test-plugins"
-	use minimal || testtargets+=" test-master"
-
-	LC_ALL=C emake -j1 ${testtargets}
-}
-
-src_install() {
-	local cgiuser=$(usex apache2 apache munin)
-
-	local dirs="
-		/var/log/munin
-		/var/lib/munin/plugin-state
-		/var/lib/munin-node/plugin-state
-		/var/www/localhost/htdocs/munin
-		/etc/munin/plugin-conf.d
-		/etc/munin/plugins"
-	use minimal || dirs+=" /etc/munin/munin-conf.d/"
-
-	keepdir ${dirs}
-	fowners munin:munin ${dirs}
-
-	# parallel install doesn't work and it's also pointless to have this
-	# run in parallel for now (because it uses internal loops).
-	emake -j1 CHOWN=true DESTDIR="${D}" $(usex minimal "install-minimal install-man" install)
-
-	# we remove /run and /var/cache from the install, as it's not the
-	# package's to deal with.
-	rm -rf "${D}"/run "${D}"/var/cache || die
-
-	# remove the plugins for non-Gentoo package managers; use -f so that
-	# it doesn't fail when installing on non-Linux platforms.
-	rm -f "${D}"/usr/libexec/munin/plugins/{apt{,_all},yum} || die
-
-	insinto /etc/munin/plugin-conf.d/
-	newins "${FILESDIR}"/${PN}-1.3.2-plugins.conf munin-node
-
-	newinitd "${FILESDIR}"/munin-node_init.d_2.0.73 munin-node
-	newconfd "${FILESDIR}"/munin-node_conf.d_1.4.6-r2 munin-node
-
-	newinitd "${FILESDIR}"/munin-asyncd.init.2 munin-asyncd
-
-	newtmpfiles - ${CATEGORY}:${PN}:${SLOT}.conf <<-EOF || die
-	d /run/munin 0700 munin munin - -
-	d /var/cache/munin-cgi 0755 ${cgiuser} munin - -
-	EOF
-
-	systemd_dounit "${FILESDIR}"/munin-async.service
-	systemd_dounit "${FILESDIR}"/munin-graph.{service,socket}
-	systemd_dounit "${FILESDIR}"/munin-html.{service,socket}
-	systemd_dounit "${FILESDIR}"/munin-node.service
-
-	cat >> "${T}"/munin.env <<- EOF
-	CONFIG_PROTECT=/var/spool/munin-async/.ssh
-	EOF
-	newenvd "${T}"/munin.env 50munin
-
-	dodoc README ChangeLog INSTALL
-	if use doc; then
-		cd "${S}"/doc/_build/html || die
-		docinto html
-		dodoc -r *
-		cd "${S}" || die
-	fi
-
-	dodir /etc/logrotate.d/
-	sed -e "s:@CGIUSER@:$(usex apache2 apache munin):g" \
-		"${FILESDIR}"/logrotate.d-munin.3 > "${D}"/etc/logrotate.d/munin
-
-	dosym ipmi_ /usr/libexec/munin/plugins/ipmi_sensor_
-
-	if use syslog; then
-		sed -i -e '/log_file/s| .*| Sys::Syslog|' \
-			"${D}"/etc/munin/munin-node.conf || die
-	fi
-
-	# Use a simpler pid file to avoid trouble with /run in tmpfs. The
-	# munin-node service is ran as user root, and only later drops
-	# privileges.
-	sed -i -e 's:/run/munin/munin-node.pid:/run/munin-node.pid:' \
-		"${D}"/etc/munin/munin-node.conf || die
-
-	keepdir /var/spool/munin-async/.ssh
-	touch "${D}"/var/spool/munin-async/.ssh/authorized_keys
-	fowners munin-async:munin /var/spool/munin-async{,/.ssh/{,authorized_keys}}
-	fperms 0750 /var/spool/munin-async{,/.ssh}
-	fperms 0600 /var/spool/munin-async/.ssh/authorized_keys
-
-	if use minimal; then
-		# This requires the presence of munin-update, which is part of
-		# the non-minimal install...
-		rm "${D}"/usr/libexec/munin/plugins/munin_stats
-	else
-		# remove font files so that we don't have to keep them around
-		rm "${D}"/usr/libexec/${PN}/*.ttf || die
-
-		if use cgi; then
-			sed -i -e '/#graph_strategy cgi/s:^#::' "${D}"/etc/munin/munin.conf || die
-
-			touch "${D}"/var/log/munin/munin-cgi-{graph,html}.log
-			fowners $(usex apache2 apache munin) \
-				/var/log/munin/munin-cgi-{graph,html}.log
-
-			if use apache2; then
-				insinto /etc/apache2/vhosts.d
-				newins "${FILESDIR}"/munin.apache.include-2.4-r1 munin-2.4.include
-			fi
-		else
-			sed \
-				-e '/#graph_strategy cgi/s:#graph_strategy cgi:graph_strategy cron:' \
-				-i "${D}"/etc/munin/munin.conf || die
-		fi
-
-		keepdir /var/lib/munin/.ssh
-		cat >> "${D}"/var/lib/munin/.ssh/config <<- EOF
-		IdentityFile /var/lib/munin/.ssh/id_ecdsa
-		IdentityFile /var/lib/munin/.ssh/id_rsa
-		EOF
-
-		fowners munin:munin /var/lib/munin/.ssh/{,config}
-		fperms go-rwx /var/lib/munin/.ssh/{,config}
-
-		dodir /usr/share/${PN}
-		cat >> "${D}"/usr/share/${PN}/crontab <<- EOF
-		# Force the shell to bash
-		SHELL=/bin/bash
-		# Mail reports to root@, not munin@
-		MAILTO=root
-
-		# This runs the munin task every 5 minutes.
-		*/5	* * * *		/usr/bin/munin-cron
-
-		# Alternatively, this route works differently
-		# Update once a minute (for busy sites)
-		#*/1 * * * *		/usr/libexec/munin/munin-update
-		## Check for limit excess every 2 minutes
-		#*/2 * * * *		/usr/libexec/munin/munin-limits
-		## Update graphs every 5 minutes
-		#*/5 * * * *		nice /usr/libexec/munin/munin-graph
-		## Update HTML pages every 15 minutes
-		#*/15 * * * *		nice /usr/libexec/munin/munin-html
-		EOF
-
-		cat >> "${D}"/usr/share/${PN}/fcrontab <<- EOF
-		# Mail reports to root@, not munin@, only execute one at a time
-		!mailto(root),serial(true)
-
-		# This runs the munin task every 5 minutes.
-		@ 5		/usr/bin/munin-cron
-
-		# Alternatively, this route works differently
-		# Update once a minute (for busy sites)
-		#@ 1	/usr/libexec/munin/munin-update
-		## Check for limit excess every 2 minutes
-		#@ 2	/usr/libexec/munin/munin-limits
-		## Update graphs every 5 minutes
-		#@ 5	nice /usr/libexec/munin/munin-graph
-		## Update HTML pages every 15 minutes
-		#@ 15	nice /usr/libexec/munin/munin-html
-		EOF
-
-		# remove .htaccess file
-		find "${D}" -name .htaccess -delete || die
-	fi
-}
-
-pkg_config() {
-	if use minimal; then
-		einfo "Nothing to do."
-		return 0
-	fi
-
-	einfo "Press enter to install the default crontab for the munin master"
-	einfo "installation from /usr/share/${PN}/f?crontab"
-	einfo "If you have a large site, you may wish to customize it."
-	read
-
-	ebegin "Setting up cron ..."
-	if has_version sys-process/fcron; then
-		fcrontab - -u munin < /usr/share/${PN}/fcrontab
-	else
-		# dcron is very fussy about syntax
-		# the following is the only form that works in BOTH dcron and vixie-cron
-		crontab - -u munin < /usr/share/${PN}/crontab
-	fi
-	eend $?
-
-	einfo "Press enter to set up the SSH keys used for SSH transport"
-	read
-
-	# generate one rsa (for legacy) and one ecdsa (for new systems)
-	ssh-keygen -t rsa \
-		-f /var/lib/munin/.ssh/id_rsa -N '' \
-		-C "created by portage for ${CATEGORY}/${PN}" || die
-	ssh-keygen -t ecdsa \
-		-f /var/lib/munin/.ssh/id_ecdsa -N '' \
-		-C "created by portage for ${CATEGORY}/${PN}" || die
-	chown -R munin:munin /var/lib/munin/.ssh || die
-	chmod 0600 /var/lib/munin/.ssh/id_{rsa,ecdsa} || die
-
-	einfo "Your public keys are available in "
-	einfo "  /var/lib/munin/.ssh/id_rsa.pub"
-	einfo "  /var/lib/munin/.ssh/id_ecdsa.pub"
-	einfo "and follows for convenience"
-	echo
-	cat /var/lib/munin/.ssh/id_*.pub
-}
-
-pkg_postinst() {
-	tmpfiles_process ${CATEGORY}:${PN}:${SLOT}.conf
-
-	elog "Please follow the munin documentation to set up the plugins you"
-	elog "need, afterwards start munin-node."
-	elog ""
-	elog "To make use of munin-async, make sure to set up the corresponding"
-	elog "SSH key in /var/lib/munin-async/.ssh/authorized_keys"
-	elog ""
-	if ! use minimal; then
-		elog "Please run"
-		elog "  emerge --config net-analyzer/munin"
-		elog "to automatically configure munin's cronjobs as well as generate"
-		elog "passwordless SSH keys to be used with munin-async."
-	fi
-	elog ""
-	elog "Further information about setting up Munin in Gentoo can be found"
-	elog "in the Gentoo Wiki: https://wiki.gentoo.org/wiki/Munin"
-
-	if use cgi; then
-		chown $(usex apache2 apache munin) \
-			"${ROOT}"/var/log/munin/munin-cgi-{graph,html}.log
-
-		if use apache2; then
-			elog "To use Munin with CGI you should include"
-			elog "/etc/apache2/vhosts.d/munin-2.4.include from the virtual"
-			elog "host you want it to be served."
-			elog "If you want to enable CGI-based HTML as well, you have to add to"
-			elog "/etc/conf.d/apache2 the option -D MUNIN_HTML_CGI."
-		else
-			elog "Effective CGI support has just been added in 2.0.7-r6."
-			elog "Documentation on how to use it is still sparse."
-		fi
-	fi
-
-	# we create this here as we don't want Portage to check /run
-	# symlinks but we still need this to be present before the reboot.
-	if ! use minimal && ! [[ -d "${ROOT}"/run/munin ]]; then
-		mkdir "${ROOT}"/run/munin
-		chown munin:munin "${ROOT}"/run/munin
-		chmod 0700 "${ROOT}"/run/munin
-	fi
-}