app-admin/webmin: Drop old

Signed-off-by: Pacho Ramos <pacho@gentoo.org>
Package-Manager: Portage-2.3.51, Repoman-2.3.11

3 files changed, 0 insertions, 748 deletions

diff --git a/app-admin/webmin/Manifest b/app-admin/webmin/Manifest
index 47a2615820d4..1869d7a965bb 100644
--- a/app-admin/webmin/Manifest
+++ b/app-admin/webmin/Manifest
@@ -1,4 +1,2 @@
-DIST webmin-1.791-minimal.tar.gz 2635024 BLAKE2B a817063c722586c99f19156733c2efbc87515498ae0238ba393c1f0a7e59726d1a6b4f797469128a75b8ab3b92d8a3fcfc2117a281a42e2a993c44d8ca0b8514 SHA512 e8e7b43865399e918ef017d4d710b21cc7ce2f6566056faa82d756be29f038e07a20055978531f8785639c78339970fbfeabd4a4aa1fa4b331f3a344a78954d2
-DIST webmin-1.791.tar.gz 28800013 BLAKE2B 90bcb65131b559f5a0e45aea6cc2735269ddbc49e91604cc37cac0951423ef57c4e1e8496aff1105925f67bce1d2ea10392fa73ca3ed4d714d12f14c76da1e27 SHA512 4ba19f057ee70bc0a283753a6c190bbae15f0e2af1650ef1656c7b94e07a6750203ef3b7190f7abd544b25988446df6b174bf06191426893bd4224e54451e771
 DIST webmin-1.881-minimal.tar.gz 2827351 BLAKE2B b8ea9964147c09c91413fbdad3b6a0e5161497296bb33b614161e370ac1292ac9cdf752483835fb279aa70ba41eb09f2774d08caa58861049e467346ad0b64ff SHA512 5b855c5562a6eb6a8fd836e3bd1dcc30696b7f63776d0f8b5ee69f5e219c749210436315fe5fd8f811f4f19e02fe4d7d3cff451a831b085101081b97b8ce794d
 DIST webmin-1.881.tar.gz 28903876 BLAKE2B beaab3282ccbbe7716fe35e62ee93e64b636f420fa9235398954904b5e14888cdc4b0acd5126184dcdab59274d3e5b71a7997df3e73e18c55849b7197f024971 SHA512 eab1acb53aca5e947bb9fac1c08a32e9eeca2903bc19595fbc8e19895bda8f4c3432550c2a87cf8c2b577b223b97566b046b7c339bd8754266544f5777560cc7
diff --git a/app-admin/webmin/files/gentoo-setup-1.791 b/app-admin/webmin/files/gentoo-setup-1.791
deleted file mode 100644
index 680dfbb5303b..000000000000
--- a/app-admin/webmin/files/gentoo-setup-1.791
+++ /dev/null
@@ -1,438 +0,0 @@
-#!/bin/sh
-# gentoo-setup.sh
-#
-# Version 1.2
-#
-# A modified original Webmin setup.sh script to comply with Gentoo specifics
-#
-# Modification done by: PhobosK <phobosk@kbfx.net>
-#
-# This script runs after the webmin archive is installed, and in the pkg_config() phase.
-# It does setup the various config files of Webmin depending on if it is
-# a new install, an upgrade or a reset.
-
-LANG=
-export LANG
-
-if [ -z ${wadir} ]; then
-	echo "You can't run this script outside of the 'emerge --config app-admin/webmin' command."
-	exit 1
-fi
-
-# All things we do is from the Webmin install dir - $wadir
-cd $wadir
-
-
-# Are we hard resetting everything?
-# If yes, we do:
-# 1. Run the specific Webmin $wadir/run-uninstalls.pl
-#	 It runs all uninstall.pl files in every module's folder.
-#	 They delete all the set specific Webmin cron jobs.
-#	 If bumping you should go through these files using the command:
-#	 find . -name uninstall.pl -exec cat {} \; -print
-# 2. Delete the whole /etc/webmin content, keeping only the gentoo .keep_* files
-if [ "$reset" = "hard" ]; then
-	echo "Running Webmin's specific uninstall procedures.. (Please ignore any possible errors)"
-	(WEBMIN_CONFIG=$config_dir WEBMIN_VAR=$var_dir LANG= "$wadir/run-uninstalls.pl")
-	echo "..done"
-	echo ""
-
-	echo "Deleting the content of user's config folder: $config_dir .."
-	find $config_dir ! -name '.keep_*' -delete 2>/dev/null
-	echo "..done"
-	echo ""
-fi
-
-
-# Are we soft resetting?
-# If yes we do:
-# - Delete the $config_dir/config file so we get new config values
-if [ "$reset" = "soft" ]; then
-	echo "Deleting the user's $config_dir/config file.."
-	if [ -f "$config_dir/config" ]; then
-		rm -f "$config_dir/config"
-	fi
-	echo "..done"
-	echo ""
-fi
-
-
-# Get all available modules of this version
-allmods=`echo */module.info | sed -e 's/\/module.info//g'`
-
-# Get current Webmin version
-ver=`cat "$wadir/version"`
-
-if [ -r "$config_dir/config" ]; then
-	upgrading=1
-fi
-
-
-# Check if upgrading from an old version
-if [ "$upgrading" = 1 ]; then
-	echo "Updating existant Webmin's config files.."
-
-	# Get current var path
-	if [ -r "$config_dir/var-path" ]; then
-		_var_dir=`cat $config_dir/var-path`
-		if [ -n ${_var_dir} ]; then
-			var_dir=${_var_dir}
-		fi
-	fi
-
-	# Get current perl path
-	if [ -r "$config_dir/perl-path" ]; then
-		_perl=`cat $config_dir/perl-path`
-		if [ -n ${_perl} ]; then
-			perl=${_perl}
-		fi
-	fi
-
-	# Get old os name and version
-	os_type=`grep "^os_type=" $config_dir/config | sed -e 's/os_type=//g'`
-	os_version=`grep "^os_version=" $config_dir/config | sed -e 's/os_version=//g'`
-	real_os_type=`grep "^real_os_type=" $config_dir/config | sed -e 's/real_os_type=//g'`
-	real_os_version=`grep "^real_os_version=" $config_dir/config | sed -e 's/real_os_version=//g'`
-
-	# Get port, ssl, no_ssl2, no_ssl3, ssl_redirect, no_sslcompression, ssl_honorcipherorder, no_tls1, no_tls1_1 and keyfile
-	port=`grep "^port=" $config_dir/miniserv.conf | sed -e 's/port=//g'`
-	ssl=`grep "^ssl=" $config_dir/miniserv.conf | sed -e 's/ssl=//g'`
-	no_ssl2=`grep "^no_ssl2=" $config_dir/miniserv.conf | sed -e 's/no_ssl2=//g'`
-	no_ssl3=`grep "^no_ssl3=" $config_dir/miniserv.conf | sed -e 's/no_ssl3=//g'`
-	ssl_redirect=`grep "^ssl_redirect=" $config_dir/miniserv.conf | sed -e 's/ssl_redirect=//g'`
-	ssl_honorcipherorder=`grep "^ssl_honorcipherorder=" $config_dir/miniserv.conf | sed -e 's/ssl_honorcipherorder=//g'`
-	no_sslcompression=`grep "^no_sslcompression=" $config_dir/miniserv.conf | sed -e 's/no_sslcompression=//g'`
-	no_tls1=`grep "^no_tls1=" $config_dir/miniserv.conf | sed -e 's/no_tls1=//g'`
-	no_tls1_1=`grep "^no_tls1_1=" $config_dir/miniserv.conf | sed -e 's/no_tls1_1=//g'`
-	keyfile=`grep "^keyfile=" $config_dir/miniserv.conf | sed -e 's/keyfile=//g'`
-
-	# Update ACLs
-	$perl "$wadir/newmods.pl" $config_dir $allmods
-
-	# Update miniserv.conf with new root directory, mime types file and server info
-	grep -v "^root=" $config_dir/miniserv.conf | grep -v "^mimetypes=" | grep -v "^server=" >$tempdir/$$.miniserv.conf
-	mv $tempdir/$$.miniserv.conf $config_dir/miniserv.conf
-	echo "root=$wadir" >> $config_dir/miniserv.conf
-	echo "mimetypes=$wadir/mime.types" >> $config_dir/miniserv.conf
-	echo "server=MiniServ/$ver" >> $config_dir/miniserv.conf
-	grep logout= $config_dir/miniserv.conf >/dev/null
-	if [ $? != "0" ]; then
-		echo "logout=$config_dir/logout-flag" >> $config_dir/miniserv.conf
-	fi
-
-	# Remove old cache of module infos
-	rm -f $config_dir/module.infos.cache
-	echo "..done"
-	echo ""
-else
-	# Create webserver's new config files
-	echo "Creating Webmin's new config files.."
-
-	echo $perl > $config_dir/perl-path
-	echo $var_dir > $config_dir/var-path
-
-	# Create a totally new conf file
-	cfile=$config_dir/miniserv.conf
-	echo "port=$port" > $cfile
-	echo "root=$wadir" >> $cfile
-	echo "mimetypes=$wadir/mime.types" >> $cfile
-	echo "addtype_cgi=internal/cgi" >> $cfile
-	echo "realm=Webmin Server" >> $cfile
-	echo "logfile=$var_dir/miniserv.log" >> $cfile
-	echo "errorlog=$var_dir/miniserv.error" >> $cfile
-	echo "pidfile=$pidfile" >> $cfile
-	echo "logtime=168" >> $cfile
-	echo "ppath=$ppath" >> $cfile
-	echo "ssl=$ssl" >> $cfile
-	echo "no_ssl2=$no_ssl2" >> $cfile
-	echo "no_ssl3=$no_ssl3" >> $cfile
-	echo "ssl_redirect=$ssl_redirect" >> $cfile
-	echo "ssl_honorcipherorder=$ssl_honorcipherorder" >> $cfile
-	echo "no_sslcompression=$no_sslcompression" >> $cfile
-	echo "no_tls1=$no_tls1" >> $cfile
-	echo "no_tls1_1=$no_tls1_1" >> $cfile
-	echo "keyfile=$keyfile" >> $cfile
-	echo "env_WEBMIN_CONFIG=$config_dir" >> $cfile
-	echo "env_WEBMIN_VAR=$var_dir" >> $cfile
-	echo "atboot=$atboot" >> $cfile
-	echo "logout=$config_dir/logout-flag" >> $cfile
-	echo "listen=10000" >> $cfile
-	echo "denyfile=\\.pl\$" >> $cfile
-	echo "log=1" >> $cfile
-	echo "blockhost_failures=5" >> $cfile
-	echo "blockhost_time=60" >> $cfile
-	echo "syslog=1" >> $cfile
-	echo "session=1" >> $cfile
-	echo "premodules=WebminCore" >> $cfile
-	echo "server=MiniServ/$ver" >> $cfile
-
-	# Append package-specific info to config file.
-	# miniserv-conf can be created by upstream or by us in src_install phase (see there).
-	if [ -f "$wadir/miniserv-conf" ]; then
-		cat "$wadir/miniserv-conf" >>$cfile
-	fi
-
-	# Create the default user allowed to login - root only
-	login="root"
-
-	if [ -r /etc/shadow ]; then
-		#crypt=`grep "^root:" /etc/shadow | cut -f 2 -d :`
-		crypt=x
-	else
-		crypt=`grep "^root:" /etc/passwd | cut -f 2 -d :`
-	fi
-
-	ufile=$config_dir/miniserv.users
-	echo "$login:$crypt:0" > $ufile
-	chmod 600 $ufile
-
-
-	echo "userfile=$ufile" >> $cfile
-	chmod 600 $cfile
-	echo "..done"
-	echo ""
-
-	echo "Creating access control file.."
-	afile=$config_dir/webmin.acl
-	echo "$login: $allmods" > $afile
-	chmod 600 $afile
-	echo "..done"
-	echo ""
-fi
-
-
-# Create start, stop, restart and reload Gentoo compliant Webmin scripts
-# We use sys-apps/openrc functions which is already pulled by sys-apps/baselayout
-# or systemctl if we run under systemd
-echo "Creating start and stop scripts.."
-rm -f $config_dir/{start,stop,restart,reload}
-
-# The start script in /etc/webmin (Gentoo compliant)
-cat <<END >>"$config_dir/start"
-#!/bin/sh
-
-if [ ! -f "${pidfile}" ]; then
-	if [[ -d /run/systemd/system ]] ; then
-		systemctl start webmin.service
-	else
-		rc-service --ifexists -- webmin start
-	fi
-fi
-END
-
-# The stop script in /etc/webmin (Gentoo compliant)
-cat <<END >>"$config_dir/stop"
-#!/bin/sh
-
-if [[ -d /run/systemd/system ]] ; then
-	systemctl stop webmin.service
-else
-	rc-service --ifexists -- webmin --ifstarted stop
-fi
-END
-
-# The restart script in /etc/webmin (Gentoo compliant)
-cat <<END >>"$config_dir/restart"
-#!/bin/sh
-
-if [[ -d /run/systemd/system ]] ; then
-	systemctl try-restart webmin.service
-else
-	rc-service --ifexists -- webmin --ifstarted restart
-fi
-END
-
-# The reload script in /etc/webmin (Gentoo compliant)
-cat <<END >>"$config_dir/reload"
-#!/bin/sh
-
-if [[ -d /run/systemd/system ]] ; then
-	systemctl reload-or-try-restart webmin.service
-else
-	rc-service --ifexists -- webmin --ifstarted reload
-fi
-END
-
-chmod 755 $config_dir/{start,stop,restart,reload}
-echo "..done"
-echo ""
-
-
-if [ "$upgrading" = 1 ]; then
-	echo "Updating other config files.."
-else
-	echo "Copying other config files.."
-fi
-
-# This just copies and merges the Webmin's release config files, with user's in the /etc/webmin folder
-newmods=`$perl "$wadir/copyconfig.pl" "$os_type/$real_os_type" "$os_version/$real_os_version" "$wadir" $config_dir "" $allmods`
-if [ "$upgrading" != 1 ]; then
-	# Store the OS and version
-	echo "os_type=$os_type" >> $config_dir/config
-	echo "os_version=$os_version" >> $config_dir/config
-	echo "real_os_type=$real_os_type" >> $config_dir/config
-	echo "real_os_version=$real_os_version" >> $config_dir/config
-
-	# Turn on logging by default
-	echo "log=1" >> $config_dir/config
-
-	# Disallow unknown referers by default
-	echo "referers_none=1" >>$config_dir/config
-else
-	# one-off hack to set log variable in config from miniserv.conf
-	grep log= $config_dir/config >/dev/null
-	if [ "$?" = "1" ]; then
-		grep log= $config_dir/miniserv.conf >> $config_dir/config
-		grep logtime= $config_dir/miniserv.conf >> $config_dir/config
-		grep logclear= $config_dir/miniserv.conf >> $config_dir/config
-	fi
-
-	# Disallow unknown referers if not set
-	grep referers_none= $config_dir/config >/dev/null
-	if [ "$?" != "0" ]; then
-		echo "referers_none=1" >>$config_dir/config
-	fi
-fi
-echo $ver > $config_dir/version
-echo "..done"
-echo ""
-
-# Set passwd_ fields in miniserv.conf from global config
-for field in passwd_file passwd_uindex passwd_pindex passwd_cindex passwd_mindex; do
-	grep $field= $config_dir/miniserv.conf >/dev/null
-	if [ "$?" != "0" ]; then
-		grep $field= $config_dir/config >> $config_dir/miniserv.conf
-	fi
-done
-grep passwd_mode= $config_dir/miniserv.conf >/dev/null
-if [ "$?" != "0" ]; then
-	echo passwd_mode=0 >> $config_dir/miniserv.conf
-fi
-
-grep ssl_honorcipherorder= $config_dir/miniserv.conf >/dev/null
-if [ "$?" != "0" ]; then
-	echo ssl_honorcipherorder=1 >> $config_dir/miniserv.conf
-fi
-
-# Disable SSL compression to defeat BEAST attack
-grep no_sslcompression= $config_dir/miniserv.conf >/dev/null
-if [ "$?" != "0" ]; then
-	echo no_sslcompression=1 >> $config_dir/miniserv.conf
-fi
-
-# Tighten SSL security
-grep no_ssl2= $config_dir/miniserv.conf >/dev/null
-if [ "$?" != "0" ]; then
-	echo no_ssl2=1 >> $config_dir/miniserv.conf
-fi
-
-grep no_ssl3= $config_dir/miniserv.conf >/dev/null
-if [ "$?" != "0" ]; then
-	echo no_ssl3=1 >> $config_dir/miniserv.conf
-fi
-
-grep no_tls1= $config_dir/miniserv.conf >/dev/null
-if [ "$?" != "0" ]; then
-    echo no_tls1=1 >> $config_dir/miniserv.conf
-fi
-
-grep no_tls1_1= $config_dir/miniserv.conf >/dev/null
-if [ "$?" != "0" ]; then
-    echo no_tls1_1=1 >> $config_dir/miniserv.conf
-fi
-
-# Make Perl crypt MD5 the default
-grep md5pass= $config_dir/config >/dev/null
-if [ "$?" != "0" ]; then
-	echo md5pass=1 >> $config_dir/config
-fi
-
-# Set a special theme if none was set before
-if [ "$theme" = "" ]; then
-	theme=`cat "$wadir/defaulttheme" 2>/dev/null`
-fi
-oldthemeline=`grep "^theme=" $config_dir/config`
-oldtheme=`echo $oldthemeline | sed -e 's/theme=//g'`
-if [ "$theme" != "" ] && [ "$oldthemeline" = "" ] && [ -d "$wadir/$theme" ]; then
-	themelist=$theme
-fi
-
-# Set a special overlay if none was set before
-if [ "$overlay" = "" ]; then
-	overlay=`cat "$wadir/defaultoverlay" 2>/dev/null`
-fi
-if [ "$overlay" != "" ] && [ "$theme" != "" ] && [ -d "$wadir/$overlay" ]; then
-	themelist="$themelist $overlay"
-fi
-
-# Apply the theme and maybe overlay
-if [ "$themelist" != "" ]; then
-	echo "theme=$themelist" >> $config_dir/config
-	echo "preroot=$themelist" >> $config_dir/miniserv.conf
-fi
-
-# If the old blue-theme is still in use, change it (new in 1.730)
-oldtheme=`grep "^theme=" $config_dir/config | sed -e 's/theme=//g'`
-if [ "$oldtheme" = "blue-theme" ]; then
-   sed -i -e 's/theme=blue-theme/theme=gray-theme/g' $config_dir/config
-   sed -i -e 's/preroot=blue-theme/preroot=gray-theme/g' $config_dir/miniserv.conf
-fi
-
-# Set the product field in the global config
-grep product= $config_dir/config >/dev/null
-if [ "$?" != "0" ]; then
-	echo product=webmin >> $config_dir/config
-fi
-
-# If password delays are not specifically disabled, enable them
-grep passdelay= $config_dir/miniserv.conf >/dev/null
-if [ "$?" != "0" ]; then
-	echo passdelay=1 >> $config_dir/miniserv.conf
-fi
-
-
-echo "Changing ownership and permissions.."
-# Make all config dirs non-world-readable
-for m in $newmods; do
-	chown -R root:root $config_dir/$m
-	chmod -R og-rw $config_dir/$m
-done
-
-# Make miniserv config files non-world-readable
-for f in miniserv.conf miniserv.users; do
-	chown -R root:root $config_dir/$f
-	chmod -R og-rw $config_dir/$f
-done
-chmod +r $config_dir/version
-
-# Fix up bad permissions from some older installs
-for m in ldap-client ldap-server ldap-useradmin mailboxes mysql postgresql servers virtual-server; do
-	if [ -d "$config_dir/$m" ]; then
-		chown root:root $config_dir/$m
-		chmod og-rw $config_dir/$m
-		chmod og-rw $config_dir/$m/config 2>/dev/null
-	fi
-done
-echo "..done"
-echo ""
-
-
-# This executes all postinstall.pl for every module
-# If you do bump, you should look at the specific changes they do with this command in root folder:
-# find . -name postinstall.pl -exec cat {} \; -print
-# Generally they are safe to run 'cause they change only user's config in /etc/webmin
-# or setup some cron jobs
-if [ "$nopostinstall" = "" ]; then
-	echo "Running postinstall scripts.. (Please ignore any possible errors)"
-	(cd "$wadir" ; WEBMIN_CONFIG=$config_dir WEBMIN_VAR=$var_dir "$wadir/run-postinstalls.pl")
-	echo "..done"
-	echo ""
-fi
-
-# Enable background collection
-if [ "$upgrading" != 1 -a -r $config_dir/system-status/enable-collection.pl ]; then
-	echo "Enabling background status collection.. (Please ignore any possible errors)"
-	$config_dir/system-status/enable-collection.pl 5
-	echo "..done"
-	echo ""
-fi
diff --git a/app-admin/webmin/webmin-1.791.ebuild b/app-admin/webmin/webmin-1.791.ebuild
deleted file mode 100644
index c69abb400e6a..000000000000
--- a/app-admin/webmin/webmin-1.791.ebuild
+++ /dev/null
@@ -1,308 +0,0 @@
-# Copyright 1999-2016 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI="5"
-
-inherit eutils pam ssl-cert systemd
-
-DESCRIPTION="A web-based Unix systems administration interface"
-HOMEPAGE="http://www.webmin.com/"
-SRC_URI="minimal? ( mirror://sourceforge/webadmin/${P}-minimal.tar.gz )
-	!minimal? ( mirror://sourceforge/webadmin/${P}.tar.gz )"
-
-LICENSE="BSD GPL-2"
-SLOT="0"
-
-KEYWORDS="~amd64 ~x86"
-
-# NOTE: The ssl flag auto added by ssl-cert eclass is not used actually
-# because openssl is forced by dev-perl/Net-SSLeay
-IUSE="minimal +ssl mysql postgres ldap"
-REQUIRED_USE="minimal? ( !mysql !postgres !ldap )"
-
-# All the required perl modules can be found easily using (in Webmin's root src dir):
-# find . -name cpan_modules.pl -exec grep "::" {} \;
-# NOTE: If Webmin doesn't find the required perl modules, it offers(runtime) the user
-# to install them using the in-built cpan module, and this will mess up perl on the system
-# That's why some modules are forced without a use flag
-# NOTE: pam, ssl and dnssec-tools deps are forced for security and Gentoo compliance installation reasons
-DEPEND="virtual/perl-MIME-Base64
-	virtual/perl-Socket
-	virtual/perl-Sys-Syslog
-	virtual/perl-Time-HiRes
-	virtual/perl-Time-Local
-	dev-perl/Authen-Libwrap
-	dev-perl/IO-Tty
-	dev-perl/MD5
-	dev-perl/Net-SSLeay
-	dev-perl/Authen-PAM
-	dev-perl/Sys-Hostname-Long
-	>=net-dns/dnssec-tools-1.13
-	!minimal? (
-		mysql? ( dev-perl/DBD-mysql )
-		postgres? ( dev-perl/DBD-Pg )
-		ldap? ( dev-perl/perl-ldap )
-		dev-perl/XML-Generator
-		dev-perl/XML-Parser
-	)"
-RDEPEND="${DEPEND}"
-
-src_prepare() {
-	local perl="$( which perl )"
-
-	# Remove the unnecessary and incompatible files
-	rm -rf acl/Authen-SolarisRBAC-0.1*
-	if ! use minimal ; then
-		rm -rf {format,{bsd,hpux,sgi}exports,zones,rbac}
-		rm -f mount/{free,net,open}bsd-mounts*
-		rm -f mount/macos-mounts*
-	fi
-
-	# For security reasons remove the SSL certificate that comes with Webmin
-	# We will create our own later
-	rm -f miniserv.pem
-
-	# Remove the Webmin setup scripts to avoid Webmin in runtime to mess up config
-	# We will use our own later
-	rm -f setup.{sh,pl}
-
-	# Set the installation type/mode to Gentoo
-	echo "gentoo" > install-type
-
-	# Fix the permissions of the install files
-	chmod -R og-w "${S}"
-
-	# Since we should not modify any files after install
-	# we set the perl path in all cgi and pl files here using Webmin's routines
-	# The pl file is Prefix safe and works only on provided input, no other filesystem files
-	ebegin "Fixing perl path in source files"
-	(find "${S}" -name '*.cgi' -print ; find "${S}" -name '*.pl' -print) | $perl "${S}"/perlpath.pl $perl -
-	eend $?
-}
-
-src_install() {
-	# Create config dir and keep
-	diropts -m0755
-	dodir /etc/webmin
-	keepdir /etc/webmin
-
-	# Create install dir
-	# Third party modules installed through Webmin go here too, so keep
-	dodir /usr/libexec/webmin
-	keepdir /usr/libexec/webmin
-
-	# Copy our own setup script to installation folder
-	insinto /usr/libexec/webmin
-	newins "${FILESDIR}"/gentoo-setup-${PV} gentoo-setup.sh
-	fperms 0744 /usr/libexec/webmin/gentoo-setup.sh
-
-	# This is here if we ever want in future ebuilds to add some specific
-	# config values in the /etc/webmin/miniserv.conf
-	# The format of this file should be the same as the one of miniserv.conf:
-	# var=value
-	#
-	# Uncomment it if you use such file. Before that check if upstream
-	# has this file in root dir too.
-	#newins "${FILESDIR}/miniserv-conf" miniserv-conf
-
-	# Create the log dir and keep
-	diropts -m0700
-	dodir /var/log/webmin
-	keepdir /var/log/webmin
-
-	# Create the init.d file and put the neccessary variables there
-	newinitd "${FILESDIR}"/init.d.webmin webmin
-	sed -i \
-		-e "s:%exe%:${EROOT}usr/libexec/webmin/miniserv.pl:" \
-		-e "s:%pid%:${EROOT}var/run/webmin.pid:" \
-		-e "s:%conf%:${EROOT}etc/webmin/miniserv.conf:" \
-		-e "s:%config%:${EROOT}etc/webmin/config:" \
-		-e "s:%perllib%:${EROOT}usr/libexec/webmin:" \
-		"${ED}etc/init.d/webmin" \
-		|| die "Failed to patch the webmin init file"
-
-	# Create the systemd service file and put the neccessary variables there
-	systemd_newunit "${FILESDIR}"/webmin.service webmin.service
-	sed -i \
-		-e "s:%exe%:${EROOT}usr/libexec/webmin/miniserv.pl:" \
-		-e "s:%pid%:${EROOT}var/run/webmin.pid:" \
-		-e "s:%conf%:${EROOT}etc/webmin/miniserv.conf:" \
-		-e "s:%config%:${EROOT}etc/webmin/config:" \
-		-e "s:%perllib%:${EROOT}usr/libexec/webmin:" \
-		"${ED}$(_systemd_get_systemunitdir)/webmin.service" \
-		|| die "Failed to patch the webmin systemd service file"
-
-	# Setup pam
-	pamd_mimic system-auth webmin auth account session
-
-	# Copy files to installation folder
-	ebegin "Copying install files to destination"
-	cp -pPR "${S}"/* "${ED}usr/libexec/webmin"
-	eend $?
-}
-
-pkg_preinst() {
-	# First stop service if running so Webmin to not messup our config
-	ebegin "Stopping any running Webmin instance prior merging"
-	if systemd_is_booted ; then
-		systemctl stop webmin.service 2>/dev/null
-	else
-		rc-service --ifexists -- webmin --ifstarted stop
-	fi
-	eend $?
-}
-
-pkg_postinst() {
-	# Run pkg_config phase first - non interactively
-	export INTERACTIVE="no"
-	pkg_config
-	# Every next time pkg_config should be interactive
-	INTERACTIVE="yes"
-
-	ewarn
-	ewarn "Bare in mind that not all Webmin modules are Gentoo tweaked and may have some issues."
-	ewarn "Always be careful when using modules that modify init entries, do update of webmin, install CPAN modules etc."
-	ewarn "To avoid problems, please before using any module, look at its configuration options first."
-	ewarn "(Usually there is a link at top in the right pane of Webmin for configuring the module.)"
-	ewarn
-	if systemd_is_booted ; then
-		elog "- To make Webmin start at boot time, run: 'systemctl enable webmin.service'"
-	else
-		elog "- To make Webmin start at boot time, run: 'rc-update add webmin default'"
-	fi
-	elog "- The default URL to connect to Webmin is: https://localhost:10000"
-	elog "- The default user that can login is: root"
-	elog "- To reconfigure Webmin in case of problems run 'emerge --config app-admin/webmin'"
-}
-
-pkg_prerm() {
-	# First stop service if running - we do not want Webmin to mess up config
-	ebegin "Stopping any running Webmin instance prior unmerging"
-	if systemd_is_booted ; then
-		systemctl stop webmin.service 2>/dev/null
-	else
-		rc-service --ifexists -- webmin --ifstarted stop
-	fi
-	eend $?
-}
-
-pkg_postrm() {
-	# If removing webmin completely, remind the user for the Webmin's own cron jobs.
-	if [[ ! ${REPLACED_BY_VERSION} ]]; then
-		ewarn
-		ewarn "You have uninstalled Webmin, so have in mind that all cron jobs scheduled"
-		ewarn "by Webmin for its own modules, are left active and they will fail when Webmin is missing."
-		ewarn "To fix this just disable them if you intend to use Webmin again,"
-		ewarn "OR delete them if not."
-		ewarn
-	fi
-}
-
-pkg_config(){
-	# First stop service if running
-	ebegin "Stopping any running Webmin instance"
-	if systemd_is_booted ; then
-		systemctl stop webmin.service 2>/dev/null
-	else
-		rc-service --ifexists -- webmin --ifstarted stop
-	fi
-	eend $?
-
-	# Next set the default reset variable to 'none'
-	# reset/_reset can be:
-	# 'none' - does not reset anything, just upgrades if a conf is present
-	#		   OR installs new conf if a conf is missing
-	# 'soft' - deletes only $config_dir/config file and thus resetting most
-	#		  conf values to their defaults. Keeps the specific Webmin cron jobs
-	# 'hard' - deletes all files in $config_dir (keeping the .keep_* Gentoo file)
-	#		  and thus resetting all Webmin. Deletes the specific Webmin cron jobs too.
-	local _reset="none"
-
-	# If in interactive mode ask user what should we do
-	if [[ "${INTERACTIVE}" = "yes" ]]; then
-		einfo
-		einfo "Please enter the number of the action you would like to perform?"
-		einfo
-		einfo "1. Update configuration"
-		einfo "   (keeps old config options and adds the new ones)"
-		einfo "2. Soft reset configuration"
-		einfo "   (keeps some old config options, the other options are set to default)"
-		ewarn "   All Webmin users will be reset"
-		einfo "3. Hard reset configuration"
-		einfo "   (all options including module options are set to default)"
-		ewarn "   You will lose all Webmin configuration options you have done till now"
-		einfo "4. Exit this configuration utility (default)"
-		while [ "$correct" != "true" ] ; do
-			read answer
-			if [[ "$answer" = "1" ]] ; then
-				_reset="none"
-				correct="true"
-			elif [[ "$answer" = "2" ]] ; then
-				_reset="soft"
-				correct="true"
-			elif  [[ "$answer" = "3" ]] ; then
-				_reset="hard"
-				correct="true"
-			elif  [ "$answer" = "4" -o "$answer" = "" ] ; then
-				die "User aborted configuration."
-			else
-				echo "Answer not recognized. Enter a number from 1 to 4"
-			fi
-		done
-
-		if [[ "$_reset" = "hard" ]]; then
-			while [ "$sure" != "true" ] ; do
-				ewarn "You will lose all Webmin configuration options you have done till now."
-				ewarn "Are you sure you want to do this? (y/n)"
-				read answer
-				if [[ $answer =~ ^[Yy]([Ee][Ss])?$ ]] ; then
-					sure="true"
-				elif [[ $answer =~ ^[Nn]([Oo])?$ ]] ; then
-					die "User aborted configuration."
-				else
-					echo "Answer not recognized. Enter 'y' or 'n'"
-				fi
-			done
-		fi
-	fi
-
-	export reset=$_reset
-
-	# Create ssl certificate for Webmin if there is not one in the proper place
-	if [[ ! -e "${EROOT}etc/ssl/webmin/server.pem" ]]; then
-		SSL_ORGANIZATION="${SSL_ORGANIZATION:-Webmin Server}"
-		SSL_COMMONNAME="${SSL_COMMONNAME:-*}"
-		install_cert "${EROOT}/etc/ssl/webmin/server"
-	fi
-
-	# Ensure all paths passed to the setup script use EROOT
-	export wadir="${EROOT}usr/libexec/webmin"
-	export config_dir="${EROOT}etc/webmin"
-	export var_dir="${EROOT}var/log/webmin"
-	export tempdir="${T}"
-	export pidfile="${EROOT}var/run/webmin.pid"
-	export perl="$( which perl )"
-	export os_type='gentoo-linux'
-	export os_version='*'
-	export real_os_type='Gentoo Linux'
-	export real_os_version='Any version'
-	# Forcing 'ssl', 'no_ssl2', 'no_ssl3', 'ssl_redirect', 'no_sslcompression',
-	# 'ssl_honorcipherorder', 'no_tls1' and 'no_tls1_1' for tightening security
-	export ssl=1
-	export no_ssl2=1
-	export no_ssl3=1
-	export ssl_redirect=1
-	export ssl_honorcipherorder=1
-	export no_sslcompression=1
-	export no_tls1=1
-	export no_tls1_1=1
-	export keyfile="${EROOT}etc/ssl/webmin/server.pem"
-	export port=10000
-
-	export atboot=0
-
-	einfo "Executing Webmin's configure script"
-	$wadir/gentoo-setup.sh
-
-	einfo "Configuration of Webmin done"
-}