diff options
Diffstat (limited to 'gdb/testsuite')
81 files changed, 487 insertions, 438 deletions
diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog index 8d2032edeeb..01f824235cb 100644 --- a/gdb/testsuite/ChangeLog +++ b/gdb/testsuite/ChangeLog @@ -1,5 +1,83 @@ 2010-06-01 Michael Snyder <msnyder@vmware.com> + * gdb.base/arithmet.exp: Use gdb_test_no_output. + * gdb.base/arrayidx.exp: Ditto. + * gdb.base/attach.exp: Ditto. + * gdb.base/auxv.exp: Ditto. + * gdb.base/bigcre.exp: Ditto. + * gdb.base/break-always.exp: Ditto. + * gdb.base/break-interp.exp: Ditto. + * gdb.base/break.exp: Ditto. + * gdb.base/breakpoint-shadow.exp: Ditto. + * gdb.base/call-ar-st.exp: Ditto. + * gdb.base/call-sc.exp: Ditto. + * gdb.base/call-signal-resume.exp: Ditto. + * gdb.base/callfuncs.exp: Ditto. + * gdb.base/catch-syscall.exp: Ditto. + * gdb.base/charset.exp: Ditto. + * gdb.base/code-expr.exp: Ditto. + * gdb.base/commands.exp: Ditto. + * gdb.base/cond-expr.exp: Ditto. + * gdb.base/condbreak.exp: Ditto. + * gdb.base/cursal.exp: Ditto. + * gdb.base/cvexpr.exp: Ditto. + * gdb.base/default.exp: Ditto. + * gdb.base/del.exp: Ditto. + * gdb.base/detach.exp: Ditto. + * gdb.base/display.exp: Ditto. + * gdb.base/ena-dis-br.exp: Ditto. + * gdb.base/eval-skip.exp: Ditto. + * gdb.base/foll-fork.exp: Ditto. + * gdb.base/foll-vfork.exp: Ditto. + * gdb.base/frame-args.exp: Ditto. + * gdb.base/funcargs.exp: Ditto. + * gdb.base/gcore-buffer-overflow.exp: Ditto. + * gdb.base/gdbvars.exp: Ditto. + * gdb.base/help.exp: Ditto. + * gdb.base/ifelse.exp: Ditto. + * gdb.base/included.exp: Ditto. + * gdb.base/list.exp: Ditto. + * gdb.base/macscp.exp: Ditto. + * gdb.base/maint.exp: Ditto. + * gdb.base/multi-fork.exp: Ditto. + * gdb.base/overlays.exp: Ditto. + * gdb.base/page.exp: Ditto. + * gdb.base/pending.exp: Ditto. + * gdb.base/pointers.exp: Ditto. + * gdb.base/pr11022.exp: Ditto. + * gdb.base/prelink.exp: Ditto. + * gdb.base/printcmds.exp: Ditto. + * gdb.base/psymtab.exp: Ditto. + * gdb.base/randomize.exp: Ditto. + * gdb.base/relational.exp: Ditto. + * gdb.base/relocate.exp: Ditto. + * gdb.base/remote.exp: Ditto. + * gdb.base/sepdebug.exp: Ditto. + * gdb.base/set-lang-auto.exp: Ditto. + * gdb.base/setshow.exp: Ditto. + * gdb.base/setvar.exp: Ditto. + * gdb.base/signals.exp: Ditto. + * gdb.base/signull.exp: Ditto. + * gdb.base/sigstep.exp: Ditto. + * gdb.base/sizeof.exp: Ditto. + * gdb.base/solib-disc.exp: Ditto. + * gdb.base/store.exp: Ditto. + * gdb.base/structs.exp: Ditto. + * gdb.base/structs2.exp: Ditto. + * gdb.base/subst.exp: Ditto. + * gdb.base/term.exp: Ditto. + * gdb.base/trace-commands.exp: Ditto. + * gdb.base/unwindonsignal.exp: Ditto. + * gdb.base/valgrind-db-attach.exp: Ditto. + * gdb.base/varargs.exp: Ditto. + * gdb.base/watch-cond.exp: Ditto. + * gdb.base/watch_thread_num.exp: Ditto. + * gdb.base/watchpoint-cond-gone.exp: Ditto. + * gdb.base/watchpoint.exp: Ditto. + * gdb.base/whatis-exp.exp: Ditto. + +2010-06-01 Michael Snyder <msnyder@vmware.com> + * gdb.cp/annota2.exp: Replace uses of send_gdb / gdb_expect. * gdb.cp/annota3.exp: Replace uses of send_gdb / gdb_expect. * gdb.cp/anon-union.exp: Replace uses of send_gdb / gdb_expect. @@ -46,7 +124,7 @@ * gdb.base/tui-layout.exp: New. -2010-05-28 Michael Snyder <msnyder@msnyder-server.eng.vmware.com> +2010-05-28 Michael Snyder <msnyder@vmware.com> * gdb.reverse/break-precsave.exp: Replace uses of send_gdb / gdb_expect. @@ -100,7 +178,7 @@ * gdb.base/sepdebug.exp (info silent break bp_location1): Fix racy excessive newline. -2010-05-27 Michael Snyder <msnyder@msnyder-server.eng.vmware.com> +2010-05-27 Michael Snyder <msnyder@vmware.com> * gdb.base/break.exp: Replace uses of send_gdb / gdb_expect. * gdb.base/relational.exp: Replace uses of send_gdb / gdb_expect. @@ -122,7 +200,7 @@ * gdb.base/watch_thread_num.exp: Replace uses of send_gdb / gdb_expect. * gdb.base/watchpoint.exp: Replace uses of send_gdb / gdb_expect. -2010-05-26 Michael Snyder <msnyder@msnyder-server.eng.vmware.com> +2010-05-26 Michael Snyder <msnyder@vmware.com> * gdb.java/jmisc.exp: Replace uses of send_gdb / gdb_expect. * gdb.java/jprint.exp: Replace uses of send_gdb / gdb_expect. diff --git a/gdb/testsuite/gdb.base/arithmet.exp b/gdb/testsuite/gdb.base/arithmet.exp index 93a8e321870..e0a463678b7 100644 --- a/gdb/testsuite/gdb.base/arithmet.exp +++ b/gdb/testsuite/gdb.base/arithmet.exp @@ -59,10 +59,10 @@ if ![runto_main] then { # test expressions with "int" types # -gdb_test "set variable x=14" "" -gdb_test "set variable y=2" "" -gdb_test "set variable z=2" "" -gdb_test "set variable w=3" "" +gdb_test_no_output "set variable x=14" +gdb_test_no_output "set variable y=2" +gdb_test_no_output "set variable z=2" +gdb_test_no_output "set variable w=3" gdb_test "print x" "14" gdb_test "print y" "2" @@ -88,8 +88,8 @@ gdb_test "print x%y%z" "0" # test precedence rules on pairs of arithmetic operators -gdb_test "set variable x=10" "" -gdb_test "set variable y=4" "" +gdb_test_no_output "set variable x=10" +gdb_test_no_output "set variable y=4" # x y z w # 10 4 2 3 diff --git a/gdb/testsuite/gdb.base/arrayidx.exp b/gdb/testsuite/gdb.base/arrayidx.exp index 0ef6c4bc297..3a3361877c0 100644 --- a/gdb/testsuite/gdb.base/arrayidx.exp +++ b/gdb/testsuite/gdb.base/arrayidx.exp @@ -41,8 +41,7 @@ if ![runto_main] then { # First, print the array without the indexes -gdb_test "set print array-indexes off" \ - "" \ +gdb_test_no_output "set print array-indexes off" \ "Set print array-indexes to off" gdb_test "print array" \ @@ -51,8 +50,7 @@ gdb_test "print array" \ # Second, print the same array with the indexes -gdb_test "set print array-indexes on" \ - "" \ +gdb_test_no_output "set print array-indexes on" \ "Set print array-indexes to on" gdb_test "print array" \ diff --git a/gdb/testsuite/gdb.base/attach.exp b/gdb/testsuite/gdb.base/attach.exp index 0d0d8496a83..fdea6423f04 100644 --- a/gdb/testsuite/gdb.base/attach.exp +++ b/gdb/testsuite/gdb.base/attach.exp @@ -246,7 +246,7 @@ proc do_attach_tests {} { # Verify that we can modify the variable "should_exit" in the # program. - gdb_test "set should_exit=1" "" "after attach2, set should_exit" + gdb_test_no_output "set should_exit=1" "after attach2, set should_exit" # Verify that the modification really happened. diff --git a/gdb/testsuite/gdb.base/auxv.exp b/gdb/testsuite/gdb.base/auxv.exp index 18547b599d9..b7e488b0343 100644 --- a/gdb/testsuite/gdb.base/auxv.exp +++ b/gdb/testsuite/gdb.base/auxv.exp @@ -53,10 +53,8 @@ gdb_exit gdb_start gdb_reinitialize_dir $srcdir/$subdir gdb_load ${binfile} -gdb_test "set print sevenbit-strings" "" \ - "set print sevenbit-strings; ${testfile}" -gdb_test "set width 0" "" \ - "set width 0; ${testfile}" +gdb_test_no_output "set print sevenbit-strings" +gdb_test_no_output "set width 0" if {$core_works} { if {[gdb_test "cd $coredir" ".*Working directory .*" \ diff --git a/gdb/testsuite/gdb.base/bigcore.exp b/gdb/testsuite/gdb.base/bigcore.exp index c60900ef37d..6b23e7c7b8d 100644 --- a/gdb/testsuite/gdb.base/bigcore.exp +++ b/gdb/testsuite/gdb.base/bigcore.exp @@ -67,10 +67,9 @@ gdb_exit gdb_start gdb_reinitialize_dir $srcdir/$subdir gdb_load ${binfile} -gdb_test "set print sevenbit-strings" "" \ - "set print sevenbit-strings; ${testfile}" -gdb_test "set width 0" "" \ - "set width 0; ${testfile}" +gdb_test_no_output "set print sevenbit-strings" +gdb_test_no_output "set width 0" + if { ![runto_main] } then { gdb_suppress_tests; } @@ -116,7 +115,7 @@ set prev_heap [extract_heap prev] # Save the total allocated size within GDB so that we can check # the core size later. -gdb_test "set \$bytes_allocated = bytes_allocated" "" "save heap size" +gdb_test_no_output "set \$bytes_allocated = bytes_allocated" "save heap size" # Now create a core dump diff --git a/gdb/testsuite/gdb.base/break-always.exp b/gdb/testsuite/gdb.base/break-always.exp index af958ebec6c..6eb0356f709 100644 --- a/gdb/testsuite/gdb.base/break-always.exp +++ b/gdb/testsuite/gdb.base/break-always.exp @@ -21,7 +21,7 @@ if { [prepare_for_testing break-always.exp break-always break-always.c] } { set bar_location [gdb_get_line_number "break in bar" break-always.c] -gdb_test "set breakpoint always-inserted on" "" +gdb_test_no_output "set breakpoint always-inserted on" gdb_test "show breakpoint always-inserted" "mode is on\." \ "confirm breakpoint always-inserted" diff --git a/gdb/testsuite/gdb.base/break-interp.exp b/gdb/testsuite/gdb.base/break-interp.exp index 1fade4e6f53..b6181f852c3 100644 --- a/gdb/testsuite/gdb.base/break-interp.exp +++ b/gdb/testsuite/gdb.base/break-interp.exp @@ -279,12 +279,13 @@ proc test_core {file displacement} { gdb_exit gdb_start # Clear it to never find any separate debug infos in $debug_root. - gdb_test "set debug-file-directory" "" "set debug-file-directory for core" + gdb_test_no_output "set debug-file-directory" \ + "set debug-file-directory for core" gdb_reinitialize_dir $srcdir/$subdir gdb_load $file # Print the "PIE (Position Independent Executable) displacement" message. - gdb_test "set verbose on" + gdb_test_no_output "set verbose on" set test "core loaded" set test_displacement "seen displacement message as $displacement" @@ -356,7 +357,7 @@ proc test_attach {file displacement} { gdb_start # Print the "PIE (Position Independent Executable) displacement" message. - gdb_test "set verbose on" + gdb_test_no_output "set verbose on" set test "attach" gdb_test_multiple "attach $pid" $test { @@ -409,12 +410,12 @@ proc test_ld {file ifmain trynosym displacement} { gdb_exit gdb_start # Clear it to never find any separate debug infos in $debug_root. - gdb_test "set debug-file-directory" + gdb_test_no_output "set debug-file-directory" gdb_reinitialize_dir $srcdir/$subdir gdb_load $file # Print the "PIE (Position Independent Executable) displacement" message. - gdb_test "set verbose on" + gdb_test_no_output "set verbose on" reach "dl_main" "run segv" $displacement @@ -454,11 +455,11 @@ proc test_ld {file ifmain trynosym displacement} { gdb_exit gdb_start # Clear it to never find any separate debug infos in $debug_root. - gdb_test "set debug-file-directory" + gdb_test_no_output "set debug-file-directory" gdb_reinitialize_dir $srcdir/$subdir # Print the "PIE (Position Independent Executable) displacement" message. - gdb_test "set verbose on" + gdb_test_no_output "set verbose on" # Test no (error) message has been printed by `exec-file'. set escapedfile [string_to_regexp $file] diff --git a/gdb/testsuite/gdb.base/break.exp b/gdb/testsuite/gdb.base/break.exp index e76e2443eb0..94132eafe7a 100644 --- a/gdb/testsuite/gdb.base/break.exp +++ b/gdb/testsuite/gdb.base/break.exp @@ -738,7 +738,7 @@ clean_restart breako2 # breakpoint on a symbol causes 'break' to choke. # -gdb_test "set breakpoint pending on" "" "rbreak junk pending setup" +gdb_test_no_output "set breakpoint pending on" "rbreak junk pending setup" # We expect at least one breakpoint to be set when we "rbreak main". gdb_test "rbreak main" \ diff --git a/gdb/testsuite/gdb.base/breakpoint-shadow.exp b/gdb/testsuite/gdb.base/breakpoint-shadow.exp index 86015176f69..8477ed0f29a 100644 --- a/gdb/testsuite/gdb.base/breakpoint-shadow.exp +++ b/gdb/testsuite/gdb.base/breakpoint-shadow.exp @@ -34,7 +34,7 @@ if ![runto_main] { # The default "auto" mode removes all the breakpoints when we stop (and not # running the nonstop mode). We would not be able to test the shadow. -gdb_test "set breakpoint always-inserted on" +gdb_test_no_output "set breakpoint always-inserted on" gdb_test "show breakpoint always-inserted" "Always inserted breakpoint mode is on." set match "\nDump of assembler code for function main:\r\n(.*)End of assembler dump.\r\n$gdb_prompt $" diff --git a/gdb/testsuite/gdb.base/call-ar-st.exp b/gdb/testsuite/gdb.base/call-ar-st.exp index 5a94b4411ab..09bb19fc0f2 100644 --- a/gdb/testsuite/gdb.base/call-ar-st.exp +++ b/gdb/testsuite/gdb.base/call-ar-st.exp @@ -290,7 +290,7 @@ gdb_test "continue" \ gdb_test "break sum_array_print" \ ".*Breakpoint ${decimal}: file .*call-ar-st.c, line.*" \ "set breakpoint in sum_array_print" -gdb_test "set print frame-arguments all" "" +gdb_test_no_output "set print frame-arguments all" gdb_test "continue" \ ".*Breakpoint ${decimal}, sum_array_print \\(seed=10, linked_list1=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .4, 6, 8, 10, 12, 14, 16, 18, 20, 22., head = 0., linked_list2=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .8, 10, 12, 14, 16, 18, 20, 22, 24, 26., head = 0., linked_list3=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .10, 12, 14, 16, 18, 20, 22, 24, 26, 28., head = 0., linked_list4=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .20, 22, 24, 26, 28, 30, 32, 34, 36, 38., head = 0.\\) at .*call-ar-st.c:1105\[ \t\n\r\]+1105.*printf\\(.Sum of 4 arrays, by element \\(add in seed as well\\).*\\);.*" \ "check args of sum_array_print" diff --git a/gdb/testsuite/gdb.base/call-sc.exp b/gdb/testsuite/gdb.base/call-sc.exp index 77cac7425d3..5abbd4436e5 100644 --- a/gdb/testsuite/gdb.base/call-sc.exp +++ b/gdb/testsuite/gdb.base/call-sc.exp @@ -78,12 +78,9 @@ proc start_scalars_test { type } { gdb_load ${binfile} # Make certain that the output is consistent - gdb_test "set print sevenbit-strings" "" \ - "set print sevenbit-strings; ${testfile}" - gdb_test "set print address off" "" \ - "set print address off; ${testfile}" - gdb_test "set width 0" "" \ - "set width 0; ${testfile}" + gdb_test_no_output "set print sevenbit-strings" + gdb_test_no_output "set print address off" + gdb_test_no_output "set width 0" # Advance to main if { ![runto_main] } then { @@ -151,7 +148,7 @@ proc test_scalar_calls { } { # stores its parameter in the global variable "L". GDB then # examining that global to confirm that the value is as expected. - gdb_test "call Fun(foo)" "" "call Fun(foo); ${tests}" + gdb_test_no_output "call Fun(foo)" "call Fun(foo); ${tests}" gdb_test "p/c L" " = 49 '1'" "p/c L; ${tests}" } diff --git a/gdb/testsuite/gdb.base/call-signal-resume.exp b/gdb/testsuite/gdb.base/call-signal-resume.exp index d3db0cf366f..cbcb9f4ab68 100644 --- a/gdb/testsuite/gdb.base/call-signal-resume.exp +++ b/gdb/testsuite/gdb.base/call-signal-resume.exp @@ -102,8 +102,8 @@ if { "$frame_number" == "" } { # Pop the dummy frame. gdb_test "frame $frame_number" "" -gdb_test "set confirm off" "" -gdb_test "return" "" +gdb_test_no_output "set confirm off" +gdb_test_no_output "return" # Resume execution, the program should continue without any signal. @@ -135,8 +135,8 @@ if { "$frame_number" == "" } { # Pop the dummy frame. gdb_test "frame $frame_number" "" -gdb_test "set confirm off" "" -gdb_test "return" "" +gdb_test_no_output "set confirm off" +gdb_test_no_output "return" # Continue again, this time we should get to the signal handler. diff --git a/gdb/testsuite/gdb.base/callfuncs.exp b/gdb/testsuite/gdb.base/callfuncs.exp index b6bd885c9a9..40bbb6a7c5b 100644 --- a/gdb/testsuite/gdb.base/callfuncs.exp +++ b/gdb/testsuite/gdb.base/callfuncs.exp @@ -297,9 +297,9 @@ gdb_start gdb_reinitialize_dir $srcdir/$subdir gdb_load ${binfile} -gdb_test "set print sevenbit-strings" "" -gdb_test "set print address off" "" -gdb_test "set width 0" "" +gdb_test_no_output "set print sevenbit-strings" +gdb_test_no_output "set print address off" +gdb_test_no_output "set width 0" if { $hp_aCC_compiler } { # Do not set language explicitly to 'C'. This will cause aCC @@ -313,7 +313,7 @@ if { $hp_aCC_compiler } { # However, turn off overload-resolution for aCC. Having it on causes # a lot of failures. - gdb_test "set overload-resolution 0" ".*" + gdb_test_no_output "set overload-resolution 0" } else { if { ![set_lang_c] } { gdb_suppress_tests; diff --git a/gdb/testsuite/gdb.base/catch-syscall.exp b/gdb/testsuite/gdb.base/catch-syscall.exp index c20e80d9726..2d9cad42000 100644 --- a/gdb/testsuite/gdb.base/catch-syscall.exp +++ b/gdb/testsuite/gdb.base/catch-syscall.exp @@ -259,7 +259,7 @@ proc test_catch_syscall_fail_nodatadir {} { # Make sure GDB doesn't load the syscalls xml from the system data # directory. - gdb_test "set data-directory /the/path/to/nowhere" "" + gdb_test_no_output "set data-directory /the/path/to/nowhere" # Testing to see if we receive a warning when calling "catch syscall" # without XML support (without datadir). @@ -379,7 +379,7 @@ proc do_syscall_tests_without_xml {} { # Make sure GDB doesn't load the syscalls xml from the system data # directory. - gdb_test "set data-directory /the/path/to/nowhere" "" + gdb_test_no_output "set data-directory /the/path/to/nowhere" # Let's test if we can catch syscalls without XML support. # We should succeed, but GDB is not supposed to print syscall names. diff --git a/gdb/testsuite/gdb.base/charset.exp b/gdb/testsuite/gdb.base/charset.exp index 6350b4ee557..58418be28ee 100644 --- a/gdb/testsuite/gdb.base/charset.exp +++ b/gdb/testsuite/gdb.base/charset.exp @@ -361,7 +361,7 @@ if {$wchar_size == 2} { set wchar_ok 1 } -gdb_test "set host-charset ASCII" "" +gdb_test_no_output "set host-charset ASCII" foreach target_charset $charset_subset { if {![valid_target_charset $target_charset]} { continue @@ -513,7 +513,7 @@ foreach target_charset $charset_subset { } # Reset the target charset. -gdb_test "set target-charset UTF-8" "" +gdb_test_no_output "set target-charset UTF-8" # \242 is not a valid UTF-8 character. gdb_test "print \"\\242\"" " = \"\\\\242\"" \ @@ -608,7 +608,7 @@ gdb_test "print 'a' == 'a' || 'b' == 'b'" \ proc string_display { var_name set_prefix x_size x_type} { - gdb_test "set ${var_name} = ${set_prefix}\"Test String\\0with zeroes\"" "" "Assign ${var_name} with prefix ${set_prefix}" + gdb_test_no_output "set ${var_name} = ${set_prefix}\"Test String\\0with zeroes\"" "Assign ${var_name} with prefix ${set_prefix}" gdb_test "x /2${x_size}s ${var_name}" ".* ${x_type}\"Test String\"\[\r\n\]+.* ${x_type}\"with zeroes\"" "Display String ${var_name} with x/${x_size}s" } diff --git a/gdb/testsuite/gdb.base/code-expr.exp b/gdb/testsuite/gdb.base/code-expr.exp index 37b15cf97cf..1d44657b343 100644 --- a/gdb/testsuite/gdb.base/code-expr.exp +++ b/gdb/testsuite/gdb.base/code-expr.exp @@ -44,9 +44,9 @@ if [target_info exists gdb_stub] { gdb_step_for_stub; } -gdb_test "set print sevenbit-strings" "" "" -gdb_test "set print address off" "" "" -gdb_test "set width 0" "" "" +gdb_test_no_output "set print sevenbit-strings" +gdb_test_no_output "set print address off" +gdb_test_no_output "set width 0" set ws "\[ \t\]*" diff --git a/gdb/testsuite/gdb.base/commands.exp b/gdb/testsuite/gdb.base/commands.exp index 3f7415dbd35..e4f648e191d 100644 --- a/gdb/testsuite/gdb.base/commands.exp +++ b/gdb/testsuite/gdb.base/commands.exp @@ -30,7 +30,7 @@ if { [prepare_for_testing commands.exp commands run.c {debug additional_flags=-D proc gdbvar_simple_if_test {} { global gdb_prompt - gdb_test "set \$foo = 0" "" "set foo in gdbvar_simple_if_test" + gdb_test_no_output "set \$foo = 0" "set foo in gdbvar_simple_if_test" # All this test should do is print 0xdeadbeef once. gdb_test "if \$foo == 1\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" \ "\\\$\[0-9\]* = 0xdeadbeef" "gdbvar_simple_if_test #1" @@ -42,7 +42,7 @@ proc gdbvar_simple_if_test {} { proc gdbvar_simple_while_test {} { global gdb_prompt - gdb_test "set \$foo = 5" "" "set foo in gdbvar_simple_while_test" + gdb_test_no_output "set \$foo = 5" "set foo in gdbvar_simple_while_test" # This test should print 0xfeedface five times. gdb_test "while \$foo > 0\np/x 0xfeedface\nset \$foo -= 1\nend" \ "\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" \ @@ -52,7 +52,8 @@ proc gdbvar_simple_while_test {} { proc gdbvar_complex_if_while_test {} { global gdb_prompt - gdb_test "set \$foo = 4" "" "set foo in gdbvar complex_if_while_test" + gdb_test_no_output "set \$foo = 4" \ + "set foo in gdbvar complex_if_while_test" # This test should alternate between 0xdeadbeef and 0xfeedface two times. gdb_test "while \$foo > 0\nset \$foo -= 1\nif \(\$foo % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend" \ "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" \ @@ -90,7 +91,7 @@ proc progvar_simple_while_test {} { return } - gdb_test "set args 5" "" "set args in progvar_simple_while_test" + gdb_test_no_output "set args 5" "set args in progvar_simple_while_test" if { ![runto factorial] } then { gdb_suppress_tests } # Don't depend upon argument passing, since most simulators don't # currently support it. Bash value variable to be what we want. @@ -110,7 +111,8 @@ proc progvar_complex_if_while_test {} { return } - gdb_test "set args 4" "" "set args in progvar_complex_if_while_test" + gdb_test_no_output "set args 4" \ + "set args in progvar_complex_if_while_test" if { ![runto factorial] } then { gdb_suppress_tests } # Don't depend upon argument passing, since most simulators don't # currently support it. Bash value variable to be what we want. @@ -128,7 +130,8 @@ proc if_while_breakpoint_command_test {} { return } - gdb_test "set args 5" "" "set args in if_while_breakpoint_command_test" + gdb_test_no_output "set args 5" \ + "set args in if_while_breakpoint_command_test" if { ![runto factorial] } then { gdb_suppress_tests } # Don't depend upon argument passing, since most simulators don't # currently support it. Bash value variable to be what we want. @@ -168,7 +171,8 @@ proc infrun_breakpoint_command_test {} { return } - gdb_test "set args 6" "" "set args in infrun_breakpoint_command_test" + gdb_test_no_output "set args 6" \ + "set args in infrun_breakpoint_command_test" if { ![runto factorial] } then { gdb_suppress_tests } # Don't depend upon argument passing, since most simulators don't # currently support it. Bash value variable to be what we want. @@ -202,7 +206,7 @@ proc breakpoint_command_test {} { return } - gdb_test "set args 6" "" "set args in breakpoint_command_test" + gdb_test_no_output "set args 6" "set args in breakpoint_command_test" if { ![runto factorial] } then { gdb_suppress_tests; } # Don't depend upon argument passing, since most simulators don't # currently support it. Bash value variable to be what we want. @@ -222,7 +226,8 @@ proc breakpoint_command_test {} { proc user_defined_command_test {} { global gdb_prompt - gdb_test "set \$foo = 4" "" "set foo in user_defined_command_test" + gdb_test_no_output "set \$foo = 4" \ + "set foo in user_defined_command_test" gdb_test_multiple "define mycommand" \ "define mycommand in user_defined_command_test" { @@ -258,7 +263,7 @@ proc watchpoint_command_test {} { gdb_test "set can-use-hw-watchpoints 0" "" "" } - gdb_test "set args 6" "" "set args in watchpoint_command_test" + gdb_test_no_output "set args 6" "set args in watchpoint_command_test" if { ![runto factorial] } then { return } delete_breakpoints @@ -377,28 +382,26 @@ proc deprecated_command_test {} { gdb_test "maintenance deprecate blah" "Can't find command.*" \ "tried to deprecate non-existing command" - gdb_test "maintenance deprecate p \"new_p\"" "" "maintenance deprecate p \"new_p\" /1/" + gdb_test_no_output "maintenance deprecate p \"new_p\"" "maintenance deprecate p \"new_p\" /1/" gdb_test "p 5" \ "Warning: 'p', an alias for the command 'print' is deprecated.*Use 'new_p'.*" \ "p deprecated warning, with replacement" gdb_test "p 5" ".\[0-9\]* = 5.*" "Deprecated warning goes away /1/" - gdb_test "maintenance deprecate p \"new_p\"" "" "maintenance deprecate p \"new_p\" /2/" - gdb_test "maintenance deprecate print \"new_print\"" "" + gdb_test_no_output "maintenance deprecate p \"new_p\"" "maintenance deprecate p \"new_p\" /2/" + gdb_test_no_output "maintenance deprecate print \"new_print\"" gdb_test "p 5" \ "Warning: command 'print' \\(p\\) is deprecated.*Use 'new_print'.*" \ "both alias and command are deprecated" gdb_test "p 5" ".\[0-9\]* = 5.*" "Deprecated warning goes away /2/" - gdb_test "maintenance deprecate set remote memory-read-packet-size \"srm\" " \ - "" \ + gdb_test_no_output "maintenance deprecate set remote memory-read-packet-size \"srm\" " \ "deprecate long command /1/" gdb_test "set remote memory-read-packet-size" \ "Warning: command 'set remote memory-read-packet-size' is deprecated.*Use 'srm'.*" \ "long command deprecated /1/" - gdb_test "maintenance deprecate set remote memory-read-packet-size" \ - "" \ + gdb_test_no_output "maintenance deprecate set remote memory-read-packet-size" \ "deprecate long command /2/" gdb_test "set remote memory-read-packet-size" \ "Warning: command 'set remote memory-read-packet-size' is deprecated.*No alternative known.*" \ @@ -417,7 +420,8 @@ proc bp_deleted_in_command_test {} { return } - gdb_test "set args 1" "" "set args in bp_deleted_in_command_test" + gdb_test_no_output "set args 1" \ + "set args in bp_deleted_in_command_test" delete_breakpoints # Create a breakpoint, and associate a command-list to it, with @@ -477,7 +481,8 @@ proc temporary_breakpoint_commands {} { return } - gdb_test "set args 1" "" "set args in temporary_breakpoint_commands" + gdb_test_no_output "set args 1" \ + "set args in temporary_breakpoint_commands" delete_breakpoints # Create a temporary breakpoint, and associate a commands list to it. @@ -609,7 +614,7 @@ proc gdb_test_no_prompt { command result msg } { proc if_commands_test {} { global gdb_prompt - gdb_test "set \$tem = 1" "" "set \$tem in if_commands_test" + gdb_test_no_output "set \$tem = 1" "set \$tem in if_commands_test" set test "if_commands_test 1" gdb_test_no_prompt "if \$tem == 2" { >} $test diff --git a/gdb/testsuite/gdb.base/cond-expr.exp b/gdb/testsuite/gdb.base/cond-expr.exp index 76635e04ba4..621ecc00c43 100644 --- a/gdb/testsuite/gdb.base/cond-expr.exp +++ b/gdb/testsuite/gdb.base/cond-expr.exp @@ -61,14 +61,14 @@ gdb_test "print (2 ? 3 : 4)" "\[0-9\]* = 3" \ gdb_test "print (0 ? 3 : 4)" "\[0-9\]* = 4" \ "print value of cond expr (const false)" -gdb_test "set variable x=14" "" "set variable x=14" -gdb_test "set variable y=2" "" "set variable y=2" -gdb_test "set variable z=3" "" "set variable z=3" +gdb_test_no_output "set variable x=14" "set variable x=14" +gdb_test_no_output "set variable y=2" "set variable y=2" +gdb_test_no_output "set variable z=3" "set variable z=3" gdb_test "print (x ? y : z)" "\[0-9\]* = 2" \ "print value of cond expr (var true)" -gdb_test "set variable x=0" "" "set variable x=0" +gdb_test_no_output "set variable x=0" "set variable x=0" gdb_test "print (x ? y : z)" "\[0-9\]* = 3" \ "print value of cond expr (var false)" diff --git a/gdb/testsuite/gdb.base/condbreak.exp b/gdb/testsuite/gdb.base/condbreak.exp index 37f7aa70c30..c56e20da4f1 100644 --- a/gdb/testsuite/gdb.base/condbreak.exp +++ b/gdb/testsuite/gdb.base/condbreak.exp @@ -86,7 +86,7 @@ gdb_test "break main" \ gdb_test "break marker1 if 1==1" \ "Breakpoint.*at.* file .*$srcfile1, line.*" -gdb_test "delete 2" "" +gdb_test_no_output "delete 2" # # test conditional break at line number @@ -94,7 +94,7 @@ gdb_test "delete 2" "" gdb_test "break $srcfile:$bp_location1 if 1==1" \ "Breakpoint.*at.* file .*$srcfile, line $bp_location1\\." -gdb_test "delete 3" "" +gdb_test_no_output "delete 3" # # test conditional break at function diff --git a/gdb/testsuite/gdb.base/cursal.exp b/gdb/testsuite/gdb.base/cursal.exp index 0748998c167..0b88986c520 100644 --- a/gdb/testsuite/gdb.base/cursal.exp +++ b/gdb/testsuite/gdb.base/cursal.exp @@ -31,8 +31,7 @@ gdb_exit gdb_start gdb_reinitialize_dir $srcdir/$subdir gdb_file_cmd ${binfile} -gdb_test "set listsize 1" \ - ".*" +gdb_test_no_output "set listsize 1" # initial sal should be first statement in main gdb_test "list" \ @@ -64,8 +63,8 @@ gdb_test "list -1" \ "list after backtrace" # check the window -gdb_test "set listsize 3" \ - ".*" +gdb_test_no_output "set listsize 3" + if {! [runto_main]} { return -1 } diff --git a/gdb/testsuite/gdb.base/cvexpr.exp b/gdb/testsuite/gdb.base/cvexpr.exp index 89f16408e24..d1333ff4725 100644 --- a/gdb/testsuite/gdb.base/cvexpr.exp +++ b/gdb/testsuite/gdb.base/cvexpr.exp @@ -44,9 +44,9 @@ if [target_info exists gdb_stub] { gdb_step_for_stub; } -gdb_test "set print sevenbit-strings" "" "" -gdb_test "set print address off" "" "" -gdb_test "set width 0" "" "" +gdb_test_no_output "set print sevenbit-strings" +gdb_test_no_output "set print address off" +gdb_test_no_output "set width 0" set ws "\[ \t\]*" diff --git a/gdb/testsuite/gdb.base/default.exp b/gdb/testsuite/gdb.base/default.exp index e54f4b6ec97..caba3b391c3 100644 --- a/gdb/testsuite/gdb.base/default.exp +++ b/gdb/testsuite/gdb.base/default.exp @@ -105,13 +105,13 @@ gdb_test "condition" "Argument required .breakpoint number.*" "condition" #test core-file gdb_test "core-file" "No core file now.|GDB can't read core files on this machine." "core-file" #test delete "d" abbreviation -gdb_test "d" "" "delete \"d\" abbreviation" +gdb_test_no_output "d" "delete \"d\" abbreviation" #test delete -gdb_test "delete" "" "delete" +gdb_test_no_output "delete" "delete" #test define gdb_test "define" "Argument required \[(\]name of command to define\[)\]." "define" #test delete breakpoints -gdb_test "delete breakpoints" "" "delete breakpoints" +gdb_test_no_output "delete breakpoints" "delete breakpoints" #test delete display # FIXME -- need to dump full output to detailed log @@ -140,19 +140,19 @@ gdb_test "directory" \ "y" #test disable "dis" abbreviation -gdb_test "dis" "" "disable \"dis\" abbreviation" +gdb_test_no_output "dis" "disable \"dis\" abbreviation" #test disable "disa" abbreviation -gdb_test "disa" "" "disable \"disa\" abbreviation" +gdb_test_no_output "disa" "disable \"disa\" abbreviation" #test disable -gdb_test "disable" "" "disable" +gdb_test_no_output "disable" "disable" #test disable breakpoints -gdb_test "disable breakpoints" "" "disable breakpoints" +gdb_test_no_output "disable breakpoints" "disable breakpoints" #test disable display -gdb_test "disable display" "" "disable display" +gdb_test_no_output "disable display" "disable display" #test disassemble gdb_test "disassemble" "No frame selected." "disassemble" #test display -gdb_test "display" "" "display" +gdb_test_no_output "display" "display" #test do gdb_test "do" "No stack." "do" #test document @@ -178,21 +178,21 @@ gdb_test "dump srec value" "Missing filename\." gdb_test "dump tekhex memory" "Missing filename\." gdb_test "dump tekhex value" "Missing filename\." #test echo -gdb_test "echo" "" "echo" +gdb_test_no_output "echo" "echo" #test enable breakpoints delete gdb_test "enable breakpoints delete" "Argument required .one or more breakpoint numbers.*" "enable breakpoints delete" #test enable breakpoints once gdb_test "enable breakpoints once" "Argument required .one or more breakpoint numbers.*" "enable breakpoints once" #test enable breakpoints -gdb_test "enable breakpoints" "" "enable breakpoints" +gdb_test_no_output "enable breakpoints" "enable breakpoints" #test enable delete gdb_test "enable delete" "Argument required .one or more breakpoint numbers.*" "enable delete" #test enable display -gdb_test "enable display" "" "enable display" +gdb_test_no_output "enable display" "enable display" #test enable once gdb_test "enable once" "Argument required .one or more breakpoint numbers.*" "enable once" #test enable -gdb_test "enable" "" "enable" +gdb_test_no_output "enable" "enable" #test exec-file send_gdb "exec-file\n" gdb_expect { @@ -300,7 +300,7 @@ gdb_test "info f" "No stack.*|No selected frame.*" "info frame \"f\" abbreviatio #test info frame gdb_test "info frame" "No stack.|No selected frame." "info frame" #test info files -gdb_test "info files" "" "info files" +gdb_test_no_output "info files" "info files" #test info float gdb_test "info float" "The program has no registers now." "info float" #test info functions @@ -326,7 +326,7 @@ gdb_test "info source" "No current source file..*" "info source" #test info sources gdb_test "info sources" "No symbol table is loaded. Use the \"file\" command.*" "info sources" #test info target -gdb_test "info target" "" "info target" +gdb_test_no_output "info target" "info target" #test info terminal gdb_test "info terminal" "No saved terminal information." "info terminal" #test info types @@ -369,13 +369,13 @@ gdb_test "output" "Argument required .expression to compute.*" "output" gdb_test "overlay" "\"overlay\" must be followed by the name of .*" #test a non-existant overlay subcommand gdb_test "overlay on" "Undefined overlay command.* Try \"help overlay\"." -gdb_test "overlay manual" "" "overlay manual #1" -gdb_test "overlay auto" "" -gdb_test "overlay off" "" +gdb_test_no_output "overlay manual" "overlay manual #1" +gdb_test_no_output "overlay auto" +gdb_test_no_output "overlay off" gdb_test "overlay list" "No sections are mapped." gdb_test "overlay map" "Overlay debugging not enabled.*" "overlay map #1" gdb_test "overlay unmap" "Overlay debugging not enabled.*" "overlay unmap #1" -gdb_test "overlay manual" "" "overlay manual #2" +gdb_test_no_output "overlay manual" "overlay manual #2" gdb_test "overlay map" "Argument required: name of an overlay section." "overlay map #2" gdb_test "overlay unmap" "Argument required: name of an overlay section." "overlay unmap #2" @@ -442,7 +442,7 @@ You must specify a function name to run, and arguments if any" } #test rbreak -gdb_test "rbreak" "" "rbreak" +gdb_test "rbreak" "rbreak" # test restore gdb_test "restore" "You can't do that without a process to debug\." @@ -466,7 +466,7 @@ gdb_test "section" "Must specify section name and its virtual address.*" "sectio #test set annotate gdb_test "set annotate" "Argument required .integer to set it to.*" "set annotate" #test set args -gdb_test "set args" "" "set args" +gdb_test_no_output "set args" "set args" #test set check "c" abbreviation gdb_test "set c" "\"set check\" must be followed by the name of a check subcommand.(\[^\r\n\]*\[\r\n\])+List of set check subcommands:(\[^\r\n\]*\[\r\n\])+set check range -- Set range checking(\[^\r\n\]*\[\r\n\])+set check type -- Set type checking(\[^\r\n\]*\[\r\n\])+Type \"help set check\" followed by set check subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set check \"c\" abbreviation" #test set check "ch" abbreviation @@ -480,7 +480,7 @@ gdb_test "set check type" "" "set check type" #test set complaints gdb_test "set complaints" "Argument required .integer to set it to.*" "set complaints" #test set confirm -gdb_test "set confirm" "" "set confirm" +gdb_test_no_output "set confirm" "set confirm" # Don't test set editing. What if we're talking to a gdb that # won't do editing correctly while we're talking to it? # gdb_test "set editing" "" "set editing" @@ -490,11 +490,11 @@ gdb_test "set environment" "Argument required .environment variable and value.*" #test set height gdb_test "set height" "Argument required .integer to set it to.*" "set height" #test set history expansion -gdb_test "set history expansion" "" "set history expansion" +gdb_test_no_output "set history expansion" "set history expansion" #test set history filename gdb_test "set history filename" "Argument required .filename to set it to.*" "set history filename" #test set history save -gdb_test "set history save" "" "set history save" +gdb_test_no_output "set history save" "set history save" #test set history size gdb_test "set history size" "Argument required .integer to set it to.*" "set history size" #test set history @@ -510,39 +510,39 @@ gdb_test "set pr" "\"set print\" must be followed by the name of a print subcomm #test set print gdb_test "set print" "\"set print\" must be followed by the name of a print subcommand.(\[^\r\n\]*\[\r\n\])+List of set print subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help set print\" followed by set print subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set print" #test set print address -gdb_test "set print address" "" "set print address" +gdb_test_no_output "set print address" "set print address" #test set print array -gdb_test "set print array" "" "set print array" +gdb_test_no_output "set print array" "set print array" #test set print asm-demangle -gdb_test "set print asm-demangle" "" "set print asm-demangle" +gdb_test_no_output "set print asm-demangle" "set print asm-demangle" #test set print demangle -gdb_test "set print demangle" "" "set print demangle" +gdb_test_no_output "set print demangle" "set print demangle" #test set print elements gdb_test "set print elements" "Argument required .integer to set it to.*" "set print elements" #test set print object -gdb_test "set print object" "" "set print object" +gdb_test_no_output "set print object" "set print object" #test set print pretty -gdb_test "set print pretty" "" "set print pretty" +gdb_test_no_output "set print pretty" "set print pretty" #test set print sevenbit-strings -gdb_test "set print sevenbit-strings" "" "set print sevenbit-strings" +gdb_test_no_output "set print sevenbit-strings" "set print sevenbit-strings" #test set print union -gdb_test "set print union" "" "set print union" +gdb_test_no_output "set print union" "set print union" #test set print vtbl -gdb_test "set print vtbl" "" "set print vtbl" +gdb_test_no_output "set print vtbl" "set print vtbl" # FIXME -- need a test for "set prompt" #test set radix gdb_test "set radix" "Input and output radices now set to decimal 10, hex a, octal 12.*" "set radix" #test set symbol-reloading -gdb_test "set symbol-reloading" "" "set symbol-reloading" +gdb_test_no_output "set symbol-reloading" "set symbol-reloading" #test set variable gdb_test "set variable" "Argument required .expression to compute.*" "set variable" #test set verbose -gdb_test "set verbose" "" "set verbose" +gdb_test_no_output "set verbose" "set verbose" #test set width gdb_test "set width" "Argument required .integer to set it to.*" "set width" #test set write # This is only supported on targets which use exec.o. -gdb_test "set write" "" "set write" +gdb_test_no_output "set write" "set write" #test set gdb_test "set" "Argument required .expression to compute.*" "set" #test shell echo Hi dad! @@ -627,9 +627,9 @@ gdb_test "show radix" "Input and output radices set to decimal 10, hex a, octal #test show symbol-reloading gdb_test "show symbol-reloading" "Dynamic symbol table reloading multiple times in one run is on." "show symbol-reloading" #test show user -gdb_test "show user" "" "show user" +gdb_test_no_output "show user" "show user" #test show values -gdb_test "show values" "" "show values" +gdb_test_no_output "show values" "show values" #test show verbose gdb_test "show verbose" "Verbose printing of informational messages is o.*|Verbosity is off.*" "show verbose" #test show version diff --git a/gdb/testsuite/gdb.base/del.exp b/gdb/testsuite/gdb.base/del.exp index 6201e9e1aa4..f5779ea0725 100644 --- a/gdb/testsuite/gdb.base/del.exp +++ b/gdb/testsuite/gdb.base/del.exp @@ -44,9 +44,9 @@ proc test_delete_alias { alias } { # First of all, remove all previous breakpoints if there were any, # and then verify that we do not have any breakpoint lying around. - gdb_test "delete" \ - "" \ + gdb_test_no_output "delete" \ "Remove all breakpoints ($alias)" + gdb_test "info break" \ "No breakpoints or watchpoints." \ "info break after removing break on main" @@ -59,8 +59,7 @@ proc test_delete_alias { alias } { "Breakpoint.*at.* file .*$srcfile, line.*" \ "breakpoint insertion ($alias)" - gdb_test "$alias \$bpnum" \ - "" \ + gdb_test_no_output "$alias \$bpnum" \ "Remove last breakpoint ($alias)" gdb_test "info break" \ diff --git a/gdb/testsuite/gdb.base/detach.exp b/gdb/testsuite/gdb.base/detach.exp index 5326a6007a4..05c0cb8e64b 100644 --- a/gdb/testsuite/gdb.base/detach.exp +++ b/gdb/testsuite/gdb.base/detach.exp @@ -49,7 +49,7 @@ proc do_detach_tests {} { global pass runto_main - gdb_test "set should_exit = 1" "" "set should_exit, $pass" + gdb_test_no_output "set should_exit = 1" "set should_exit, $pass" gdb_test "detach" "Detaching from program: .*$escapedbinfile, .*" "detach, $pass" } diff --git a/gdb/testsuite/gdb.base/display.exp b/gdb/testsuite/gdb.base/display.exp index 434df3c876b..4c4e8976c96 100644 --- a/gdb/testsuite/gdb.base/display.exp +++ b/gdb/testsuite/gdb.base/display.exp @@ -103,11 +103,11 @@ gdb_test "cont" ".*\[Ww\]atchpoint 3: sum.*\[1-9\]*: x/s &sum.*\[1-9\]*: /f f = gdb_test "cont" ".*\[Ww\]atchpoint 3: sum.*\[1-9\]*: x/s &sum.*\[1-9\]*: /f f = 4.1415\r\n\[1-9\]*: x/i &k.*\r\n\[1-9\]*: /x j = 0x0.*\[1-9\]*: i = 0.*" "second disp" gdb_test "enab disp 6" ".*No display number 6..*" "catch err" -gdb_test "disab disp 1" ".*" "disab disp 1" -gdb_test "disab disp 2" ".*" "disab disp 2" -gdb_test "enab disp 1" ".*" "re-enab" -gdb_test "enab disp 1" ".*" "re-enab of enab" -gdb_test "undisp 5" ".*" "undisp" +gdb_test_no_output "disab disp 1" "disab disp 1" +gdb_test_no_output "disab disp 2" "disab disp 2" +gdb_test_no_output "enab disp 1" "re-enab" +gdb_test_no_output "enab disp 1" "re-enab of enab" +gdb_test_no_output "undisp 5" "undisp" gdb_test "info disp" ".*Auto-display expressions now in effect.*y /f f.*y /1bi &k.*n /x j.*y i.*" "info disp" gdb_test "cont" ".*\[Ww\]atch.*5.1415.*.*i = 0.*" "next hit" @@ -150,7 +150,7 @@ gdb_test "printf %d" ".*Bad format string, missing.*" gdb_test "printf \"%d" ".*Bad format string, non-terminated.*" gdb_test "printf \"%d%d\",i" ".*Wrong number of arguments.*" gdb_test "printf \"\\\\!\\a\\f\\r\\t\\v\\b\\n\"" ".*!.*" -gdb_test "printf \"\"" ".*" "re-set term" +gdb_test_no_output "printf \"\"" "re-set term" gdb_test "printf \"\\w\"" ".*Unrecognized escape character.*" gdb_test "printf \"%d\" j" ".*Invalid argument syntax.*" gdb_test "printf \"%p\\n\", 0" "\\(nil\\)" @@ -169,7 +169,7 @@ gdb_test "print j" " = 0\[\\r\\n\]+" "debug test output 3" if [istarget "hppa2.0w-hp-hpux11*"] { xfail "'x/0 j' terminates PA64 process - skipped test point" } else { - gdb_test "x/0 j" ".*" + gdb_test_no_output "x/0 j" } if [istarget "hppa*-hp-hpux*"] { # on HP-UX you could access the first page without getting an error diff --git a/gdb/testsuite/gdb.base/ena-dis-br.exp b/gdb/testsuite/gdb.base/ena-dis-br.exp index f7ef71384c3..83d83c63ff6 100644 --- a/gdb/testsuite/gdb.base/ena-dis-br.exp +++ b/gdb/testsuite/gdb.base/ena-dis-br.exp @@ -84,7 +84,7 @@ proc break_at { breakpoint where } { set bp [break_at "marker1" " line ($bp_location15|$bp_location16)"] -gdb_test "enable $bp" "" "enable break marker1" +gdb_test_no_output "enable $bp" "enable break marker1" gdb_test "info break $bp" \ "\[0-9\]*\[ \t\]+breakpoint\[ \t\]+keep\[ \t\]+y.*" \ @@ -102,13 +102,13 @@ gdb_test_multiple "continue" "$test" { } } -gdb_test "delete $bp" "" "delete break marker1" +gdb_test_no_output "delete $bp" "delete break marker1" # Verify that we can set a breakpoint to be self-disabling after the # first time it triggers. set bp [break_at "marker2" " line ($bp_location8|$bp_location9)"] -gdb_test "enable once $bp" "" "enable once break marker2" +gdb_test_no_output "enable once $bp" "enable once break marker2" gdb_test "info break $bp" \ "\[0-9\]*\[ \t\]+breakpoint\[ \t\]+dis\[ \t\]+y.*" \ @@ -143,7 +143,7 @@ if ![runto_main] then { set bp [break_at "marker3" " line ($bp_location17|$bp_location18)"] -gdb_test "enable del $bp" "" "enable del break marker3" +gdb_test_no_output "enable del $bp" "enable del break marker3" gdb_test "info break $bp" \ "\[0-9\]*\[ \t\]+breakpoint\[ \t\]+del\[ \t\]+y.*" \ @@ -162,7 +162,7 @@ gdb_test "info break $bp" \ set bp [break_at "marker4" " line ($bp_location14|$bp_location13).*"] -gdb_test "disable $bp" "" "disable break marker4" +gdb_test_no_output "disable $bp" "disable break marker4" gdb_test "info break $bp" \ "\[0-9\]*\[ \t\]+breakpoint\[ \t\]+keep\[ \t\]+n.*" \ @@ -237,7 +237,7 @@ gdb_test "ignore $bp 1" \ "Will ignore next crossing of breakpoint \[0-9\]*.*" \ "ignore break marker1" -gdb_test "enable del $bp" "" "enable del break marker1" +gdb_test_no_output "enable del $bp" "enable del break marker1" gdb_test "info break $bp" \ "\[0-9\]*\[ \t\]+breakpoint\[ \t\]+del\[ \t\]+y.*ignore next 1 hits.*" \ @@ -263,7 +263,7 @@ gdb_test "ignore $bp 10" \ "Will ignore next 10 crossings of breakpoint \[0-9\]*.*" \ "ignore break marker1" -gdb_test "disable $bp" "" "disable break marker1" +gdb_test_no_output "disable $bp" "disable break marker1" gdb_continue_to_end "no stop at ignored & disabled break marker1" rerun_to_main diff --git a/gdb/testsuite/gdb.base/eval-skip.exp b/gdb/testsuite/gdb.base/eval-skip.exp index ade7c3290d3..bcff8222a48 100644 --- a/gdb/testsuite/gdb.base/eval-skip.exp +++ b/gdb/testsuite/gdb.base/eval-skip.exp @@ -60,10 +60,10 @@ if ![runto_main] then { continue } -gdb_test "set variable x=14" "" "set variable x=14" -gdb_test "set variable y=2" "" "set variable y=2" -gdb_test "set variable z=2" "" "set variable z=2" -gdb_test "set variable w=3" "" "set variable w=3" +gdb_test_no_output "set variable x=14" "set variable x=14" +gdb_test_no_output "set variable y=2" "set variable y=2" +gdb_test_no_output "set variable z=2" "set variable z=2" +gdb_test_no_output "set variable w=3" "set variable w=3" gdb_test "print (0 && (x+y))" ".$decimal = $false" \ "print value of (0 && (x+y))" diff --git a/gdb/testsuite/gdb.base/foll-fork.exp b/gdb/testsuite/gdb.base/foll-fork.exp index 90f001920f5..4c5e53ac44c 100644 --- a/gdb/testsuite/gdb.base/foll-fork.exp +++ b/gdb/testsuite/gdb.base/foll-fork.exp @@ -195,7 +195,8 @@ proc catch_fork_unpatch_child {} { "Breakpoint .*file .*$srcfile, line .*" \ "unpatch child, breakpoint at exit call" - gdb_test "set follow-fork child" "" "unpatch child, set follow-fork child" + gdb_test_no_output "set follow-fork child" \ + "unpatch child, set follow-fork child" set test "unpatch child, unpatched parent breakpoints from child" gdb_test_multiple "continue" $test { @@ -342,7 +343,7 @@ gdb_load ${binfile} # The "Detaching..." and "Attaching..." messages may be hidden by # default. -gdb_test "set verbose" "" +gdb_test_no_output "set verbose" # This is a test of gdb's ability to follow the parent, child or both # parent and child of a Unix fork() system call. diff --git a/gdb/testsuite/gdb.base/foll-vfork.exp b/gdb/testsuite/gdb.base/foll-vfork.exp index 4813d2ea647..e55d7005635 100644 --- a/gdb/testsuite/gdb.base/foll-vfork.exp +++ b/gdb/testsuite/gdb.base/foll-vfork.exp @@ -396,7 +396,7 @@ gdb_load ${binfile} # The "Detaching..." and "Attaching..." messages may be hidden by # default. -gdb_test "set verbose" "" +gdb_test_no_output "set verbose" # This is a test of gdb's ability to follow the parent or child # of a Unix vfork() system call. (The child will subsequently diff --git a/gdb/testsuite/gdb.base/frame-args.exp b/gdb/testsuite/gdb.base/frame-args.exp index 2d3c9367b00..c037e1bd32f 100644 --- a/gdb/testsuite/gdb.base/frame-args.exp +++ b/gdb/testsuite/gdb.base/frame-args.exp @@ -37,8 +37,7 @@ if ![runto break_me] then { # Test with "print frame-arguments" set to "all" -gdb_test "set print frame-arguments all" \ - "" \ +gdb_test_no_output "set print frame-arguments all" \ "set print frame-arguments all" gdb_test "frame 1" \ ".*in call_me \\(i=3, f=5, s=({a = 3, b = 5}|<value optimized out>), ss=0x\[0-9a-f\]\+, u=({.*}|<value optimized out>), e=green\\) at .*frame-args\\.c:.*" \ @@ -46,8 +45,7 @@ gdb_test "frame 1" \ # Test with "print frame-arguments" set to "scalars" -gdb_test "set print frame-arguments scalars" \ - "" \ +gdb_test_no_output "set print frame-arguments scalars" \ "set print frame-arguments scalars" gdb_test "frame 1" \ ".*in call_me \\(i=3, f=5, s=\\.\\.\\., ss=0x\[0-9a-f\]\+, u=\\.\\.\\., e=green\\) at .*frame-args\\.c:.*" \ @@ -55,8 +53,7 @@ gdb_test "frame 1" \ # Test with "print frame-arguments" set to "none" -gdb_test "set print frame-arguments none" \ - "" \ +gdb_test_no_output "set print frame-arguments none" \ "set print frame-arguments none" gdb_test "frame 1" \ ".*in call_me \\(i=\\.\\.\\., f=\\.\\.\\., s=\\.\\.\\., ss=\\.\\.\\., u=\\.\\.\\., e=\\.\\.\\.\\) at .*frame-args\\.c:.*" \ diff --git a/gdb/testsuite/gdb.base/funcargs.exp b/gdb/testsuite/gdb.base/funcargs.exp index 78c387c63f2..10f135e0d59 100644 --- a/gdb/testsuite/gdb.base/funcargs.exp +++ b/gdb/testsuite/gdb.base/funcargs.exp @@ -1179,7 +1179,7 @@ gdb_test_multiple "show endian" "getting target endian" { # Perform tests -gdb_test "set print frame-arguments all" "" +gdb_test_no_output "set print frame-arguments all" integral_args funcargs_reload diff --git a/gdb/testsuite/gdb.base/gcore-buffer-overflow.exp b/gdb/testsuite/gdb.base/gcore-buffer-overflow.exp index f048c05cd7d..98c33cc7eb1 100644 --- a/gdb/testsuite/gdb.base/gcore-buffer-overflow.exp +++ b/gdb/testsuite/gdb.base/gcore-buffer-overflow.exp @@ -51,9 +51,8 @@ gdb_test_multiple "help gcore" "help gcore" { } } -gdb_test "set args ${pattern}" \ - "" \ - "Set buffer exceeding arguments" +gdb_test_no_output "set args ${pattern}" \ + "Set buffer exceeding arguments" if { ! [ runto_main ] } then { untested gcore-buffer-overflow.exp diff --git a/gdb/testsuite/gdb.base/gdbvars.exp b/gdb/testsuite/gdb.base/gdbvars.exp index 10c7c21082e..50842a35017 100644 --- a/gdb/testsuite/gdb.base/gdbvars.exp +++ b/gdb/testsuite/gdb.base/gdbvars.exp @@ -33,19 +33,19 @@ if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {deb proc test_convenience_variables {} { global gdb_prompt - gdb_test "set \$foo = 101" "" \ + gdb_test_no_output "set \$foo = 101" \ "Set a new convenience variable" gdb_test "print \$foo" " = 101" \ "Print contents of new convenience variable" - gdb_test "set \$foo = 301" "" \ + gdb_test_no_output "set \$foo = 301" \ "Set convenience variable to a new value" gdb_test "print \$foo" " = 301" \ "Print new contents of convenience variable" - gdb_test "set \$_ = 11" "" \ + gdb_test_no_output "set \$_ = 11" \ "Set convenience variable \$_" gdb_test "print \$_" " = 11" \ @@ -111,7 +111,7 @@ proc test_value_history {} { proc test_with_program {} { global hex - gdb_test "set \$prog_var = p" "" \ + gdb_test_no_output "set \$prog_var = p" \ "Set a new convenience variable to a program variable" gdb_test "print /x \$prog_var" " = $hex" \ "Print contents of new convenience variable of program variable" diff --git a/gdb/testsuite/gdb.base/help.exp b/gdb/testsuite/gdb.base/help.exp index b193292f63d..d4a539260b8 100644 --- a/gdb/testsuite/gdb.base/help.exp +++ b/gdb/testsuite/gdb.base/help.exp @@ -24,8 +24,8 @@ gdb_start -# force the height of the debugger to be pretty large so no pagers getused -gdb_test "set height 400" "" "test set height" +# force the height of the debugger to be pretty large so no pagers get used +gdb_test_no_output "set height 400" "test set height" # use a larger expect input buffer for long help outputs. # test help add-symbol-file diff --git a/gdb/testsuite/gdb.base/ifelse.exp b/gdb/testsuite/gdb.base/ifelse.exp index 462c51e5d42..c456549e4d2 100644 --- a/gdb/testsuite/gdb.base/ifelse.exp +++ b/gdb/testsuite/gdb.base/ifelse.exp @@ -93,7 +93,7 @@ gdb_test "if 1\necho true\\n\nelse\necho false\\n\nend" "true" "" # create gdb_test "define abc\nif 1\nelse\nend\nend" "" "create define with empty else" # call (note that condition is 1 so should pass) -gdb_test "abc" "" "call original define" +gdb_test_no_output "abc" "call original define" # replace set message "replace define with if .. else with empty body" gdb_test_multiple "define abc\necho got here\\n\nend" $message { diff --git a/gdb/testsuite/gdb.base/included.exp b/gdb/testsuite/gdb.base/included.exp index 4424e6f50c3..8acf24c9c59 100644 --- a/gdb/testsuite/gdb.base/included.exp +++ b/gdb/testsuite/gdb.base/included.exp @@ -27,7 +27,7 @@ gdb_start gdb_reinitialize_dir $srcdir/$subdir gdb_load ${binfile} -gdb_test "set listsize 1" "" +gdb_test_no_output "set listsize 1" gdb_test "list main" ".*" get_debug_format diff --git a/gdb/testsuite/gdb.base/list.exp b/gdb/testsuite/gdb.base/list.exp index 6b93fcf3a34..91633cc3c04 100644 --- a/gdb/testsuite/gdb.base/list.exp +++ b/gdb/testsuite/gdb.base/list.exp @@ -496,7 +496,7 @@ proc test_list_filename_and_function {} { proc test_forward_search {} { global timeout - gdb_test "set listsize 4" "" + gdb_test_no_output "set listsize 4" # On SunOS4, this gives us lines 19-22. On AIX, it gives us # lines 20-23. This depends on whether the line number of a function # is considered to be the openbrace or the first statement--either one @@ -528,7 +528,7 @@ if [target_info exists gdb_stub] { gdb_step_for_stub; } -gdb_test "set width 0" "" "set width 0" +gdb_test_no_output "set width 0" test_listsize get_debug_format diff --git a/gdb/testsuite/gdb.base/macscp.exp b/gdb/testsuite/gdb.base/macscp.exp index 5d451246611..858765a6c9b 100644 --- a/gdb/testsuite/gdb.base/macscp.exp +++ b/gdb/testsuite/gdb.base/macscp.exp @@ -456,16 +456,14 @@ gdb_test "print MACRO_TO_EXPAND" \ " = 0" \ "print expression with macro in scope." -gdb_test "macro define MACRO_TO_EXPAND 72" \ - "" \ +gdb_test_no_output "macro define MACRO_TO_EXPAND 72" \ "user macro override" gdb_test "print MACRO_TO_EXPAND" \ " = 72" \ "choose user macro" -gdb_test "macro undef MACRO_TO_EXPAND" \ - "" \ +gdb_test_no_output "macro undef MACRO_TO_EXPAND" \ "remove user override" gdb_test "print MACRO_TO_EXPAND" \ @@ -478,8 +476,7 @@ gdb_test "print MACRO_TO_EXPAND" \ "No symbol \"MACRO_TO_EXPAND\" in current context\." \ "print expression with macro after undef." -gdb_test "macro define MACRO_TO_EXPAND 5" \ - "" \ +gdb_test_no_output "macro define MACRO_TO_EXPAND 5" \ "basic macro define" gdb_test "print MACRO_TO_EXPAND" \ @@ -490,16 +487,14 @@ gdb_test "macro list" \ "macro define MACRO_TO_EXPAND 5" \ "basic macro list" -gdb_test "macro define MACRO_TO_EXPAND(x) x" \ - "" \ +gdb_test_no_output "macro define MACRO_TO_EXPAND(x) x" \ "basic redefine, macro with args" gdb_test "print MACRO_TO_EXPAND (7)" \ " = 7" \ "expansion of macro with arguments" -gdb_test "macro undef MACRO_TO_EXPAND" \ - "" \ +gdb_test_no_output "macro undef MACRO_TO_EXPAND" \ "basic macro undef" gdb_test "print MACRO_TO_EXPAND" \ @@ -566,8 +561,7 @@ gdb_expect { timeout { fail "(timeout) complete 'p FORTY_' 2" } } -gdb_test "macro define TWENTY_THREE 25" \ - "" \ +gdb_test_no_output "macro define TWENTY_THREE 25" \ "defining TWENTY_THREE" # User-defined macros are always in scope. @@ -592,8 +586,7 @@ gdb_test "macro expand SPLICE(x, y)" \ "expands to: xy" \ "basic macro splicing" -gdb_test "macro define robotinvasion 2010" \ - "" \ +gdb_test_no_output "macro define robotinvasion 2010" \ "define splice helper" gdb_test "macro expand SPLICE(robot, invasion)" \ @@ -602,20 +595,16 @@ gdb_test "macro expand SPLICE(robot, invasion)" \ # Varargs tests. -gdb_test "macro define va_c99(...) varfunc (fixedarg, __VA_ARGS__)" \ - "" \ +gdb_test_no_output "macro define va_c99(...) varfunc (fixedarg, __VA_ARGS__)" \ "define first varargs helper" -gdb_test "macro define va2_c99(x, y, ...) varfunc (fixedarg, x, y, __VA_ARGS__)" \ - "" \ +gdb_test_no_output "macro define va2_c99(x, y, ...) varfunc (fixedarg, x, y, __VA_ARGS__)" \ "define second varargs helper" -gdb_test "macro define va_gnu(args...) varfunc (fixedarg, args)" \ - "" \ +gdb_test_no_output "macro define va_gnu(args...) varfunc (fixedarg, args)" \ "define third varargs helper" -gdb_test "macro define va2_gnu(args...) varfunc (fixedarg, ## args)" \ - "" \ +gdb_test_no_output "macro define va2_gnu(args...) varfunc (fixedarg, ## args)" \ "define fourth varargs helper" gdb_test "macro expand va_c99(one, two, three)" \ @@ -644,16 +633,13 @@ gdb_test "macro expand va2_gnu()" \ # Stringification tests. -gdb_test "macro define str(x) #x" \ - "" \ +gdb_test_no_output "macro define str(x) #x" \ "define stringification macro" -gdb_test "macro define maude 5" \ - "" \ +gdb_test_no_output "macro define maude 5" \ "define first stringification helper" -gdb_test "macro define xstr(x) str(x)" \ - "" \ +gdb_test_no_output "macro define xstr(x) str(x)" \ "define second stringification helper" gdb_test "print str(5)" \ @@ -685,9 +671,9 @@ gdb_test "print xstr(maude)" \ "stringify with substitution" # Regression test for pp-number bug. -gdb_test "macro define si_addr fields.fault.si_addr" \ - "" \ +gdb_test_no_output "macro define si_addr fields.fault.si_addr" \ "define si_addr macro" + gdb_test "macro expand siginfo.si_addr" \ "expands to: siginfo.fields.fault.si_addr" \ "macro expand siginfo.si_addr" diff --git a/gdb/testsuite/gdb.base/maint.exp b/gdb/testsuite/gdb.base/maint.exp index ac96a99c1c2..f48647de670 100644 --- a/gdb/testsuite/gdb.base/maint.exp +++ b/gdb/testsuite/gdb.base/maint.exp @@ -160,7 +160,7 @@ gdb_test_multiple "maint print statistics" "maint print statistics" { } # There aren't any ... -gdb_test "maint print dummy-frames" "" +gdb_test_no_output "maint print dummy-frames" send_gdb "maint print objfiles\n" diff --git a/gdb/testsuite/gdb.base/multi-forks.exp b/gdb/testsuite/gdb.base/multi-forks.exp index feb7af114bb..e188bd56162 100644 --- a/gdb/testsuite/gdb.base/multi-forks.exp +++ b/gdb/testsuite/gdb.base/multi-forks.exp @@ -120,7 +120,7 @@ proc continue_to_exit_bp_loc {} { # The result should be that each of the 4 forks returns zero. runto_main -gdb_test "set follow-fork child" +gdb_test_no_output "set follow-fork child" continue_to_exit_bp_loc gdb_test "print pids" "\\$.* = \\{0, 0, 0, 0\\}.*" "follow child, print pids" @@ -160,7 +160,7 @@ gdb_test "help set detach-on-fork" "whether gdb will detach the child.*" \ gdb_test "show detach-on-fork" "on." "show detach default on" -gdb_test "set detach off" "" "set detach off" +gdb_test_no_output "set detach off" "set detach off" # # We will now run every fork up to the exit bp, @@ -196,27 +196,27 @@ gdb_test "detach inferior 5" "Detaching .*" "Detach 5" # Test kill inferior # -gdb_test "kill inferior 6" "" "Kill 6" +gdb_test_no_output "kill inferior 6" "Kill 6" gdb_test "info inferior 6" "<null>.*" "Did kill 6" -gdb_test "kill inferior 7" "" "Kill 7" +gdb_test_no_output "kill inferior 7" "Kill 7" gdb_test "info inferior 7" "<null>.*" "Did kill 7" -gdb_test "kill inferior 8" "" "Kill 8" +gdb_test_no_output "kill inferior 8" "Kill 8" gdb_test "info inferior 8" "<null>.*" "Did kill 8" -gdb_test "kill inferior 9" "" "Kill 9" +gdb_test_no_output "kill inferior 9" "Kill 9" gdb_test "info inferior 9" "<null>.*" "Did kill 9" -gdb_test "kill inferior 10" "" "Kill 10" +gdb_test_no_output "kill inferior 10" "Kill 10" gdb_test "info inferior 10" "<null>.*" "Did kill 10" -gdb_test "kill inferior 11" "" "Kill 11" +gdb_test_no_output "kill inferior 11" "Kill 11" gdb_test "info inferior 11" "<null>.*" "Did kill 11" -gdb_test "kill inferior 12" "" "Kill 12" +gdb_test_no_output "kill inferior 12" "Kill 12" gdb_test "info inferior 12" "<null>.*" "Did kill 12" -gdb_test "kill inferior 13" "" "Kill 13" +gdb_test_no_output "kill inferior 13" "Kill 13" gdb_test "info inferior 13" "<null>.*" "Did kill 13" -gdb_test "kill inferior 14" "" "Kill 14" +gdb_test_no_output "kill inferior 14" "Kill 14" gdb_test "info inferior 14" "<null>.*" "Did kill 14" -gdb_test "kill inferior 15" "" "Kill 15" +gdb_test_no_output "kill inferior 15" "Kill 15" gdb_test "info inferior 15" "<null>.*" "Did kill 15" -gdb_test "kill inferior 16" "" "Kill 16" +gdb_test_no_output "kill inferior 16" "Kill 16" gdb_test "info inferior 16" "<null>.*" "Did kill 16" return 0 diff --git a/gdb/testsuite/gdb.base/overlays.exp b/gdb/testsuite/gdb.base/overlays.exp index a18f08ffc20..4d69f78e3dc 100644 --- a/gdb/testsuite/gdb.base/overlays.exp +++ b/gdb/testsuite/gdb.base/overlays.exp @@ -98,7 +98,7 @@ set fptrcast [string_to_regexp "{int (int)}"] set iptrcast [string_to_regexp "(int *)"] set hexx "0x\[0-9abcdefABCDEF\]+" -gdb_test "overlay manual" "" +gdb_test_no_output "overlay manual" gdb_test "overlay list" "No sections are mapped." "List with none mapped" # capture the LMA addresses of [foo bar baz grbx foox barx bazx grbxx] @@ -247,7 +247,7 @@ if $data_overlays then { # test automatic mode -gdb_test "overlay auto" "" +gdb_test_no_output "overlay auto" gdb_test "overlay list" "No sections are mapped." "List none mapped (auto)" gdb_test "break foo" "Breakpoint .*at .*file .*foo.c.*" "break foo" gdb_test "break bar" "Breakpoint .*at .*file .*bar.c.*" "break bar" diff --git a/gdb/testsuite/gdb.base/page.exp b/gdb/testsuite/gdb.base/page.exp index 2ea940b9b16..7d4150a5a84 100644 --- a/gdb/testsuite/gdb.base/page.exp +++ b/gdb/testsuite/gdb.base/page.exp @@ -23,7 +23,7 @@ if $tracelevel { gdb_exit gdb_start -gdb_test "set pagination off" "" +gdb_test_no_output "set pagination off" gdb_test "show pagination" "State of pagination is off.*" "pagination is off" send_gdb "help\n" gdb_expect_list "unpaged help" ".*$gdb_prompt $" { @@ -48,9 +48,9 @@ gdb_expect_list "unpaged help" ".*$gdb_prompt $" { } -gdb_test "set pagination on" "" +gdb_test_no_output "set pagination on" gdb_test "show pagination" "State of pagination is on.*" "pagination is on" -gdb_test "set height 10" "" +gdb_test_no_output "set height 10" send_gdb "help\n" gdb_expect_list "paged help" \ ".*---Type <return> to continue, or q <return> to quit---" { diff --git a/gdb/testsuite/gdb.base/pending.exp b/gdb/testsuite/gdb.base/pending.exp index 4fde9c167f2..657862f3922 100644 --- a/gdb/testsuite/gdb.base/pending.exp +++ b/gdb/testsuite/gdb.base/pending.exp @@ -133,7 +133,7 @@ gdb_test_multiple "break pendfunc2" "Don't set pending breakpoint" { # Add condition to pending breakpoint # -gdb_test "condition 1 k == 1" "" +gdb_test_no_output "condition 1 k == 1" gdb_test "info break" \ "Num Type\[ \]+Disp Enb Address\[ \]+What.* @@ -146,7 +146,7 @@ gdb_test "info break" \ # Disable pending breakpoint # -gdb_test "disable 1" "" +gdb_test_no_output "disable 1" gdb_test "info break" \ "Num Type\[ \]+Disp Enb Address\[ \]+What.* @@ -159,7 +159,7 @@ gdb_test "info break" \ # Add commands to pending breakpoint # gdb_test "commands 1\nprint k\nend" "" \ - "Set commands for pending breakpoint" + "Set commands for pending breakpoint" gdb_test "info break" \ "Num Type\[ \]+Disp Enb Address\[ \]+What.* @@ -229,8 +229,7 @@ gdb_test "" \ # Re-enable the first pending breakpoint which should resolve # -gdb_test "enable 1" \ -"" \ +gdb_test_no_output "enable 1" \ "re-enabling pending breakpoint that can resolve instantly" # diff --git a/gdb/testsuite/gdb.base/pointers.exp b/gdb/testsuite/gdb.base/pointers.exp index 32b3396fa46..4d577c9550f 100644 --- a/gdb/testsuite/gdb.base/pointers.exp +++ b/gdb/testsuite/gdb.base/pointers.exp @@ -127,8 +127,10 @@ gdb_test "next " "more_code.*;" "continuing after dummy()" # timeout { fail "(timeout) illegal pointer assignment rejected" } # } -gdb_test "set variable v_int_pointer=&v_int_array\[0\]" "" "set pointer to beginning of array" -gdb_test "set variable v_int_pointer2=&v_int_array\[1\]" "" "set pointer to end of array" +gdb_test_no_output "set variable v_int_pointer=&v_int_array\[0\]" \ + "set pointer to beginning of array" +gdb_test_no_output "set variable v_int_pointer2=&v_int_array\[1\]" \ + "set pointer to end of array" gdb_test "print *v_int_pointer" " = 6" "print object pointed to" @@ -153,24 +155,26 @@ gdb_test "print v_int_pointer < v_int_pointer2" " = $true" \ gdb_test "print v_int_pointer > v_int_pointer2" " = $false" \ "pointer1>pointer2" -gdb_test "set variable y = *v_int_pointer++" "" "set y = *v_int_pointer++" +gdb_test_no_output "set variable y = *v_int_pointer++" \ + "set y = *v_int_pointer++" gdb_test "print y" " = 6" "pointer assignment" gdb_test "print *v_int_pointer" " = 18" "and post-increment" -gdb_test "set variable y = *--v_int_pointer2" "" "set y = *--v_int_pointer2" +gdb_test_no_output "set variable y = *--v_int_pointer2" \ + "set y = *--v_int_pointer2" gdb_test "print y" " = 6" "pointer assignment" gdb_test "print *v_int_pointer2" " = 6" "and pre-decrement" -gdb_test "set variable y =v_int_pointer-v_int_pointer2" "" \ +gdb_test_no_output "set variable y =v_int_pointer-v_int_pointer2" \ "set y =v_int_pointer-v_int_pointer2" gdb_test "print y" " = 1" "pointer1-pointer2" -gdb_test "set variable v_int_pointer=v_int_array" "" \ +gdb_test_no_output "set variable v_int_pointer=v_int_array" \ "set v_int_pointer=v_int_array" gdb_test "print *v_int_pointer" " = 6" \ "print array element through pointer" @@ -190,7 +194,7 @@ gdb_test "print (*rptr)\[1\]" " = 1" \ gdb_test "print (*rptr)\[2\]" " = 2" \ "print array element through pointer \#5" -gdb_test "set variable rptr = rptr+1" "" "increment rptr" +gdb_test_no_output "set variable rptr = rptr+1" "increment rptr" gdb_test "print (*rptr)\[0\]" " = 3" \ "print array element through pointer \#6" diff --git a/gdb/testsuite/gdb.base/pr11022.exp b/gdb/testsuite/gdb.base/pr11022.exp index c5356c8244c..f29a7600f71 100644 --- a/gdb/testsuite/gdb.base/pr11022.exp +++ b/gdb/testsuite/gdb.base/pr11022.exp @@ -52,6 +52,6 @@ gdb_test "continue" ".*break here.*" "breakpoint hit" gdb_test "continue" ".*Hardware watchpoint.*Old value = 0.*New value = 42.*" \ "watchpoint hit" gdb_test "continue" ".*break here.*" "breakpoint hit 2" -gdb_test "set var x = 1" +gdb_test_no_output "set var x = 1" gdb_test "continue" ".*Hardware watchpoint.*Old value = 1.*New value = 42.*" \ "watchpoint hit 2" diff --git a/gdb/testsuite/gdb.base/prelink.exp b/gdb/testsuite/gdb.base/prelink.exp index c12f962c161..1803a803bf0 100644 --- a/gdb/testsuite/gdb.base/prelink.exp +++ b/gdb/testsuite/gdb.base/prelink.exp @@ -108,6 +108,6 @@ gdb_reinitialize_dir $srcdir/$subdir gdb_load ${binfile} # Print the "adjusting expectations" message. -gdb_test "set verbose on" +gdb_test_no_output "set verbose on" gdb_test "core-file $objdir/$subdir/prelink.core" {Using PIC \(Position Independent Code\) prelink displacement.*} "prelink" diff --git a/gdb/testsuite/gdb.base/printcmds.exp b/gdb/testsuite/gdb.base/printcmds.exp index e87ae83cf1b..b6a8a3efd49 100644 --- a/gdb/testsuite/gdb.base/printcmds.exp +++ b/gdb/testsuite/gdb.base/printcmds.exp @@ -42,7 +42,7 @@ get_compiler_info ${binfile} proc set_lang_c {} { global gdb_prompt - if [gdb_test "set language c" "" "set language c"] { + if [gdb_test_no_output "set language c" "set language c"] { return 0 } @@ -414,7 +414,7 @@ proc test_print_repeats_10 {} { global gdb_prompt for { set x 1; } { $x <= 16 } { incr x; } { - gdb_test "set print elements $x" "" + gdb_test_no_output "set print elements $x" for { set e 1; } { $e <= 16 } {incr e; } { set v [expr $e - 1]; set command "p &ctable2\[${v}*16\]" @@ -467,23 +467,23 @@ proc test_print_strings {} { # Test that setting print elements unlimited doesn't completely suppress # printing; this was a bug in older gdb's. - gdb_test "set print elements 0" "" + gdb_test_no_output "set print elements 0" gdb_test "p teststring" \ " = (.unsigned char .. )?\"teststring contents\"" "p teststring with elements set to 0" - gdb_test "set print elements 1" "" + gdb_test_no_output "set print elements 1" gdb_test "p teststring" \ " = (.unsigned char .. )?\"t\"\\.\\.\\." "p teststring with elements set to 1" - gdb_test "set print elements 5" "" + gdb_test_no_output "set print elements 5" gdb_test "p teststring" \ " = (.unsigned char .. )?\"tests\"\\.\\.\\." "p teststring with elements set to 5" - gdb_test "set print elements 19" "" + gdb_test_no_output "set print elements 19" gdb_test "p teststring" \ " = (.unsigned char .. )?\"teststring contents\"" "p teststring with elements set to 19" - gdb_test "set print elements 20" "" + gdb_test_no_output "set print elements 20" gdb_test "p teststring" \ " = (.unsigned char .. )?\"teststring contents\"" "p teststring with elements set to 20" - gdb_test "set print elements 8" "" + gdb_test_no_output "set print elements 8" gdb_test "p &ctable1\[0\]" \ " = \\(unsigned char \\*\\) \"\"" @@ -556,7 +556,7 @@ proc test_print_strings {} { proc test_print_int_arrays {} { global gdb_prompt - gdb_test "set print elements 24" "" + gdb_test_no_output "set print elements 24" gdb_test_escape_braces "p int1dim" \ " = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11}" @@ -571,7 +571,7 @@ proc test_print_int_arrays {} { proc test_print_typedef_arrays {} { global gdb_prompt - gdb_test "set print elements 24" "" + gdb_test_no_output "set print elements 24" gdb_test_escape_braces "p a1" \ " = {2, 4, 6, 8, 10, 12, 14, 16, 18, 20}" @@ -584,9 +584,9 @@ proc test_print_typedef_arrays {} { gdb_test "p a2\[3\]" " = 100 'd'" # Regression test of null-stop; PR 11049. - gdb_test "set print null-stop on" "" + gdb_test_no_output "set print null-stop on" gdb_test "p a2" " = \"abcd\"" "print a2 with null-stop on" - gdb_test "set print null-stop off" "" + gdb_test_no_output "set print null-stop off" } proc test_artificial_arrays {} { @@ -603,8 +603,8 @@ proc test_print_char_arrays {} { global gdb_prompt global hex - gdb_test "set print elements 24" "" - gdb_test "set print address on" "" + gdb_test_no_output "set print elements 24" + gdb_test_no_output "set print address on" gdb_test "p arrays" \ " = {array1 = \"abc\", array2 = \"d\", array3 = \"e\", array4 = \"fg\", array5 = \"hij\"}" @@ -621,13 +621,13 @@ proc test_print_char_arrays {} { gdb_test "p parrays->array5" " = \"hij\"" gdb_test "p &parrays->array5" " = \\(unsigned char \\(\\*\\)\\\[4\\\]\\) $hex" - gdb_test "set print address off" "" + gdb_test_no_output "set print address off" } proc test_print_string_constants {} { global gdb_prompt - gdb_test "set print elements 50" "" + gdb_test_no_output "set print elements 50" if [target_info exists gdb,cannot_call_functions] { setup_xfail "*-*-*" 2416 @@ -772,9 +772,9 @@ gdb_file_cmd ${binfile} gdb_test "print \$pc" "No registers\\." "print \$pc (with file)" -gdb_test "set print sevenbit-strings" "" -gdb_test "set print address off" "" -gdb_test "set width 0" "" +gdb_test_no_output "set print sevenbit-strings" +gdb_test_no_output "set print address off" +gdb_test_no_output "set width 0" if [set_lang_c] then { if { [test_compiler_info "armcc-*"] } { diff --git a/gdb/testsuite/gdb.base/psymtab.exp b/gdb/testsuite/gdb.base/psymtab.exp index 72d1eca50ab..a465832a820 100644 --- a/gdb/testsuite/gdb.base/psymtab.exp +++ b/gdb/testsuite/gdb.base/psymtab.exp @@ -62,7 +62,7 @@ gdb_load ${binfile} # Disable the prompt for whether to set pending breakpoints. # We don't want a breakpoint, we just want to verify the symbol # isn't found. -gdb_test "set breakpoint pending off" "" "psymtab pending setup" +gdb_test_no_output "set breakpoint pending off" "psymtab pending setup" # This test is looking for a bug that manifested itself when GDB was # looking for a partial symbol such that there wasn't such a partial diff --git a/gdb/testsuite/gdb.base/randomize.exp b/gdb/testsuite/gdb.base/randomize.exp index 43fef8f5e3f..d70da3e61ea 100644 --- a/gdb/testsuite/gdb.base/randomize.exp +++ b/gdb/testsuite/gdb.base/randomize.exp @@ -76,7 +76,7 @@ if [string equal $addr1 $addr2] { pass $test } -gdb_test "set disable-randomization on" +gdb_test_no_output "set disable-randomization on" gdb_test "show disable-randomization" \ "Disabling randomization .* is on." \ "show disable-randomization on" diff --git a/gdb/testsuite/gdb.base/relational.exp b/gdb/testsuite/gdb.base/relational.exp index 10eb35a3842..5818cb9aecb 100644 --- a/gdb/testsuite/gdb.base/relational.exp +++ b/gdb/testsuite/gdb.base/relational.exp @@ -50,10 +50,10 @@ if ![runto_main] then { # test expressions with "int" types # -gdb_test "set variable x=14" "" "set variable x=14" -gdb_test "set variable y=2" "" "set variable y=2" -gdb_test "set variable z=2" "" "set variable z=2" -gdb_test "set variable w=3" "" "set variable w=3" +gdb_test_no_output "set variable x=14" "set variable x=14" +gdb_test_no_output "set variable y=2" "set variable y=2" +gdb_test_no_output "set variable z=2" "set variable z=2" +gdb_test_no_output "set variable w=3" "set variable w=3" gdb_test "print x" " = 14" "print value of x" @@ -78,9 +78,9 @@ gdb_test "print x != y" "$true" "print value of x!=y" # Test associativity of <, >, <=, >=, ==, != -gdb_test "set variable x=3" "" "set variable x" -gdb_test "set variable y=5" "" "set variable y" -gdb_test "set variable z=2" "" "set variable z" +gdb_test_no_output "set variable x=3" "set variable x" +gdb_test_no_output "set variable y=5" "set variable y" +gdb_test_no_output "set variable z=2" "set variable z" gdb_test "print x < y < z" "$true" "print value of x<y<z" @@ -90,30 +90,30 @@ gdb_test "print x > y > z" "$false" "print value of x>y>z" gdb_test "print x >= y >= z" "$false" "print value of x>=y>=z" -gdb_test "set variable x=2" "" "set variable x" -gdb_test "set variable y=2" "" "set variable y" -gdb_test "set variable z=1" "" "set variable z" +gdb_test_no_output "set variable x=2" "set variable x" +gdb_test_no_output "set variable y=2" "set variable y" +gdb_test_no_output "set variable z=1" "set variable z" gdb_test "print x == y == z" "$true" "print value of x==y==z" -gdb_test "set variable z=0" "" "set variable z" +gdb_test_no_output "set variable z=0" "set variable z" gdb_test "print x != y != z" "$false" "print value of x!=y!=z" # test precedence rules on pairs of relational operators -gdb_test "set variable x=0" "" "set variable x" -gdb_test "set variable y=2" "" "set variable y" -gdb_test "set variable z=2" "" "set variable z" +gdb_test_no_output "set variable x=0" "set variable x" +gdb_test_no_output "set variable y=2" "set variable y" +gdb_test_no_output "set variable z=2" "set variable z" gdb_test "print x < y == z" "$false" "print value of x<y==z" # 0 2 2 gdb_test "print x < y != z" "$true" "print value of x<y!=z" -gdb_test "set variable x=2" "" "set variable x" -gdb_test "set variable y=3" "" "set variable y" -gdb_test "set variable z=1" "" "set variable z" +gdb_test_no_output "set variable x=2" "set variable x" +gdb_test_no_output "set variable y=3" "set variable y" +gdb_test_no_output "set variable z=1" "set variable z" # 2 3 1 @@ -122,28 +122,28 @@ gdb_test "print x < y <= z" "$true" "print value of x<y<=z" # 2 3 1 gdb_test "print x < y >= z" "$true" "print value of x<y>=z" -gdb_test "set variable z=0" "" " set variable z" +gdb_test_no_output "set variable z=0" " set variable z" # 2 3 0 gdb_test "print x < y > z" "$true" "print value of x<y>z" -gdb_test "set variable x=1" "" " set variable x" +gdb_test_no_output "set variable x=1" " set variable x" # 1 3 0 gdb_test "print x > y >= z" "$true" "print value of x>y>=z" -gdb_test "set variable z=2" "" " set variable z" +gdb_test_no_output "set variable z=2" " set variable z" # 1 3 2 gdb_test "print x > y == z" "$false" "print value of x>y==z" -gdb_test "set variable x=2" "" " set variable x" -gdb_test "set variable z=0" "" " set variable z" +gdb_test_no_output "set variable x=2" " set variable x" +gdb_test_no_output "set variable z=0" " set variable z" # 2 3 0 gdb_test "print x > y != z" "$false" "print value of x>y!=z" -gdb_test "set variable x=4" "" "set x to 4" +gdb_test_no_output "set variable x=4" "set x to 4" # 4 3 0 gdb_test "print x > y <= z" "$false" "print value of x>y<=z" @@ -151,13 +151,13 @@ gdb_test "print x > y <= z" "$false" "print value of x>y<=z" # 4 3 0 gdb_test "print x >= y == z" "$false" "print value of x>=y==z" -gdb_test "set variable x=2" "" " set variable x" +gdb_test_no_output "set variable x=2" " set variable x" # 2 3 0 gdb_test "print x >= y != z" "$false" "print value of x>=y!=z" -gdb_test "set variable x=0" "" " set variable x" -gdb_test "set variable z=4" "" " set variable z" +gdb_test_no_output "set variable x=0" " set variable x" +gdb_test_no_output "set variable z=4" " set variable z" # 0 3 4 gdb_test "print x >= y <= z" "$true" "print value of x>=y<=z" @@ -165,7 +165,7 @@ gdb_test "print x >= y <= z" "$true" "print value of x>=y<=z" # 0 3 4 gdb_test "print x <= y == z" "$false" "print value of x<=y==z" -gdb_test "set variable x=2" "" " set variable x" +gdb_test_no_output "set variable x=2" " set variable x" # 2 3 4 gdb_test "print x <= y != z" "$true" "print value of x<=y!=z" @@ -177,7 +177,7 @@ gdb_test "print x == y != z" "$true" "print value of x==y!=z" # test use of parenthesis to enforce different order of evaluation -gdb_test "set variable z=0" "" " set variable z" +gdb_test_no_output "set variable z=0" " set variable z" # 2 3 0 gdb_test "print x >= (y < z)" "$true" "print value of x>=(y<z)" @@ -188,8 +188,8 @@ gdb_test "print x >= (y != z)" "$true" "print value of x>=(y!=z)" # 2 3 0 gdb_test "print x == (y == z)" "$false" "print value of x==(y==z)" -gdb_test "set variable x=1" "" " set variable x" -gdb_test "set variable z=4" "" " set variable z" +gdb_test_no_output "set variable x=1" " set variable x" +gdb_test_no_output "set variable z=4" " set variable z" # 1 3 4 gdb_test "print (x == y) < z" "$true" "print value of (x==y)<z" diff --git a/gdb/testsuite/gdb.base/relocate.exp b/gdb/testsuite/gdb.base/relocate.exp index 8943c59fd0c..ccc214eb6b5 100644 --- a/gdb/testsuite/gdb.base/relocate.exp +++ b/gdb/testsuite/gdb.base/relocate.exp @@ -105,7 +105,7 @@ gdb_exit gdb_start gdb_reinitialize_dir $srcdir/$subdir -gdb_test "set \$offset = 0x10000" "" +gdb_test_no_output "set \$offset = 0x10000" # Load the object file. gdb_test "add-symbol-file ${binfile} \$offset" \ diff --git a/gdb/testsuite/gdb.base/remote.exp b/gdb/testsuite/gdb.base/remote.exp index 57b3e47b254..9dcacda9c16 100644 --- a/gdb/testsuite/gdb.base/remote.exp +++ b/gdb/testsuite/gdb.base/remote.exp @@ -50,12 +50,12 @@ gdb_test "set remote memory-write-packet-size" \ "Argument required .integer, `fixed' or `limited'.\." \ "set write-packet - NULL" -gdb_test "set remote memory-write-packet-size 20" "" +gdb_test_no_output "set remote memory-write-packet-size 20" gdb_test "show remote memory-write-packet-size" \ "The memory-write-packet-size is 20. Packets are limited to 20 bytes." \ "set write-packet - small" -gdb_test "set remote memory-write-packet-size 1" "" +gdb_test_no_output "set remote memory-write-packet-size 1" gdb_test "show remote memory-write-packet-size" \ "The memory-write-packet-size is 1. Packets are limited to 20 bytes." \ "set write-packet - very-small" @@ -69,8 +69,8 @@ proc gdb_load_timed {executable class writesize} { set test "timed download `[file tail $executable]' - $class, $writesize" if {$writesize != ""} then { - gdb_test "set remote memory-write-packet-size $writesize" \ - "" "$test - set packet size" + gdb_test_no_output "set remote memory-write-packet-size $writesize" \ + "$test - set packet size" send_gdb "set remote memory-write-packet-size $class\n" gdb_expect 5 { @@ -153,8 +153,8 @@ if {$sizeof_random_data > 16380 } then { # Read a chunk just larger than the packet size (reduce the packet # size to make life easier) -gdb_test "set remote memory-read-packet-size 16" \ - "" +gdb_test_no_output "set remote memory-read-packet-size 16" + gdb_test "show remote memory-read-packet-size" \ "The memory-read-packet-size is 16. Packets are limited to 20 bytes." gdb_test "x/17ub random_data" \ diff --git a/gdb/testsuite/gdb.base/sepdebug.exp b/gdb/testsuite/gdb.base/sepdebug.exp index f6d41b8eba4..b55eb9f220d 100644 --- a/gdb/testsuite/gdb.base/sepdebug.exp +++ b/gdb/testsuite/gdb.base/sepdebug.exp @@ -444,7 +444,7 @@ gdb_test "clear marker3" {Deleted breakpoints [0-9]+ [0-9]+.*} # Verify that a breakpoint can be set via a convenience variable. # -gdb_test "set \$foo=$bp_location11" "" \ +gdb_test_no_output "set \$foo=$bp_location11" \ "set convenience variable \$foo to bp_location11" gdb_test "break \$foo" \ @@ -668,7 +668,8 @@ proc test_different_dir {type test_different_dir xfail} { gdb_exit gdb_start gdb_reinitialize_dir $srcdir/$subdir - gdb_test "set debug-file-directory ${test_different_dir}" ".*" "set separate debug location" + gdb_test_no_output "set debug-file-directory ${test_different_dir}" \ + "set separate debug location" gdb_load ${binfile} if [target_info exists gdb_stub] { diff --git a/gdb/testsuite/gdb.base/set-lang-auto.exp b/gdb/testsuite/gdb.base/set-lang-auto.exp index 5edf3d5f2cd..882463af21c 100644 --- a/gdb/testsuite/gdb.base/set-lang-auto.exp +++ b/gdb/testsuite/gdb.base/set-lang-auto.exp @@ -44,8 +44,7 @@ gdb_test "show lang" \ # Now, switch the language to a specific language, instead of leaving it # on auto. -gdb_test "set lang ada" \ - "" \ +gdb_test_no_output "set lang ada" \ "forcing the language to ada" # Verify that the language is now "ada". @@ -54,8 +53,7 @@ gdb_test "show lang" \ "show lang after switching language to ada" # Then, switch back to auto... -gdb_test "set lang auto" \ - "" \ +gdb_test_no_output "set lang auto" \ "switching the language back to auto" # ... And verify that the language mode is back to auto *and* that diff --git a/gdb/testsuite/gdb.base/setshow.exp b/gdb/testsuite/gdb.base/setshow.exp index 78f6b640315..9ff62158f31 100644 --- a/gdb/testsuite/gdb.base/setshow.exp +++ b/gdb/testsuite/gdb.base/setshow.exp @@ -80,12 +80,12 @@ gdb_test "show annotate" "Annotation_level is 1..*" "show annotate (1)" #test annotation_level 1 gdb_test "info line 1" "Line 1 of .* is at address .* but contains no code.*:1:0:beg:0x.*" "annotation_level 1" #test set annotate 0 -gdb_test "set annotate 0" "" "set annotate 0" +gdb_test_no_output "set annotate 0" "set annotate 0" gdb_test "show annotate" "Annotation_level is 0..*" "show annotate (0)" #test annotation_level 0 gdb_test "info line 1" "Line 1 of .* is at address .* but contains no code.*" "annotation_level 0" #test set args -gdb_test "set args foo bar blup baz bubble" "" "set args" +gdb_test_no_output "set args foo bar blup baz bubble" "set args" #test show args gdb_test "show args" "Argument list to give program being debugged when it is started is \"foo bar blup baz bubble\"..*" "show args" @@ -101,11 +101,11 @@ gdb_test "set check range on" "" "set check range on" #test show check range on gdb_test "show check range" "Range checking is \"on\"\..*" "show check range (on)" #test set check range off with trailing space -gdb_test "set check range off " "" "set check range off" +gdb_test_no_output "set check range off " "set check range off" #test show check range off gdb_test "show check range" "Range checking is \"off\"\..*" "show check range (off)" #test set check range auto -gdb_test "set check range auto" "" "set check range auto" +gdb_test_no_output "set check range auto" "set check range auto" #test show check range auto gdb_test "show check range" "Range checking is \"auto; currently .*" "show check range (auto)" #test set check type on @@ -113,80 +113,82 @@ gdb_test "set check type on" "" "set check type on" #test show check type on gdb_test "show check type" "Type checking is \"on\"..*" "show check type (on)" #test set check type off with trailing space -gdb_test "set check type off " "" "set check type off" +gdb_test_no_output "set check type off " "set check type off" #test show check type off gdb_test "show check type" "Type checking is \"off\"..*" "show check type (off)" #test set check type auto -gdb_test "set check type auto" "" "set check type auto" +gdb_test_no_output "set check type auto" "set check type auto" #test show check type gdb_test "show check type" "Type checking is \"auto; currently .*" "show check type (auto)" #test set complaints 100 -gdb_test "set complaints 100" "" "set complaints 100" +gdb_test_no_output "set complaints 100" "set complaints 100" #test show complaints 100 gdb_test "show complaints" "Max number of complaints about incorrect symbols is 100..*" "show complaints (100)" #test set complaints 0 -gdb_test "set complaints 0" "" "set complaints 0" +gdb_test_no_output "set complaints 0" "set complaints 0" #test show complaints 0 gdb_test "show complaints" "Max number of complaints about incorrect symbols is 0..*" "show complaints (0)" #test set confirm off -gdb_test "set confirm off" "" "set confirm off" +gdb_test_no_output "set confirm off" "set confirm off" #test show confirm off gdb_test "show confirm" "Whether to confirm potentially dangerous operations is off..*" "show confirm (off)" #test set confirm on -gdb_test "set confirm on" "" "set confirm on" +gdb_test_no_output "set confirm on" "set confirm on" #test show confirm on gdb_test "show confirm" "Whether to confirm potentially dangerous operations is on..*" "show confirm (on)" #test set editing off -gdb_test "set editing off" "" "set editing off" +gdb_test_no_output "set editing off" "set editing off" #test show editing off gdb_test "show editing" "Editing of command lines as they are typed is off..*" "show editing (off)" #test set editing on -#gdb_test "set editing on" "" "set editing on" +#gdb_test_no_output "set editing on" "set editing on" #test show editing on #gdb_test "show editing" "Editing of command lines as they are typed is on..*" "show editing (on)" #test set environment FOOBARBAZ -gdb_test "set environment FOOBARBAZ = grbxgrbxgrbx" "" "set environment FOOBARBAZ" +gdb_test_no_output "set environment FOOBARBAZ = grbxgrbxgrbx" \ + "set environment FOOBARBAZ" #test show environment FOOBARBAZ gdb_test "show environment FOOBARBAZ" "FOOBARBAZ = grbxgrbxgrbx.*" "show environment FOOBARBAZ" #test set height 100 -gdb_test "set height 100" "" "set height 100" +gdb_test_no_output "set height 100" "set height 100" #test show height 100 gdb_test "show height" "Number of lines gdb thinks are in a page is 100..*" "show height" # back to infinite height to avoid pagers gdb_test "set height 0" "" "" #test set history expansion on -gdb_test "set history expansion on" "" "set history expansion on" +gdb_test_no_output "set history expansion on" "set history expansion on" #test show history expansion on gdb_test "show history expansion on" "History expansion on command input is on.*" "show history expansion" #test set history filename foobar.baz -gdb_test "set history filename foobar.baz" "" "set history filename foobar.baz" +gdb_test_no_output "set history filename foobar.baz" \ + "set history filename foobar.baz" #test show history filename foobar.baz gdb_test "show history filename" "The filename in which to record the command history is \"foobar.baz\"..*" "show history filename (foobar.baz)" #test set history save on -gdb_test "set history save on" "" "set history save on" +gdb_test_no_output "set history save on" "set history save on" #test show history save on gdb_test "show history save" "Saving of the history record on exit is on..*" "show history save (on)" #test set history size 100 -gdb_test "set history size 100" "" "set history size 100" +gdb_test_no_output "set history size 100" "set history size 100" #test show history size 100 gdb_test "show history size" "The size of the command history is 100..*" "show history size (100)" #test set language asm -gdb_test "set language asm" "" "set language asm" +gdb_test_no_output "set language asm" "set language asm" #test show language asm gdb_test "show language" "The current source language is \"asm\"..*" "show language (asm)" #test set language java, with a trailing space -gdb_test "set language java " "" "set language java" +gdb_test_no_output "set language java " "set language java" #test show language java gdb_test "show language" "The current source language is \"java\"..*" "show language (java)" #test completion for set language. gdb_test "complete set language min" "set language minimal" \ "complete set language minimal" #test set language auto -gdb_test "set language auto" "" "set language auto" +gdb_test_no_output "set language auto" "set language auto" #test show language gdb_test "show language" "The current source language is \"auto.*\"..*" "show language (auto)" #test set listsize 100 -gdb_test "set listsize 100" "" "set listsize 100" +gdb_test_no_output "set listsize 100" "set listsize 100" #test show listsize 100 gdb_test "show listsize" "Number of source lines gdb will list by default is 100..*" "show listsize (100)" @@ -228,26 +230,26 @@ gdb_test "set radix" "Input and output radices now set to decimal 10, hex a, oct #test show radix 10 gdb_test "show radix" "Input and output radices set to decimal 10, hex a, octal 12..*" "show radix (10)" #test set width 90 -gdb_test "set width 90" "" "set width 90" +gdb_test_no_output "set width 90" "set width 90" #test show width 90 gdb_test "show width" "Number of characters gdb thinks are in a line is 90..*" "show width (90)" #test set write on # This is only supported on targets which use exec.o. -gdb_test "set write on" "" "set write on" +gdb_test_no_output "set write on" "set write on" #test show write on # This is only supported on targets which use exec.o. gdb_test "show write" "Writing into executable and core files is on..*" "show write (on)" #test set symbol-reloading on -gdb_test "set symbol-reloading on" "" "set symbol-reloading on" +gdb_test_no_output "set symbol-reloading on" "set symbol-reloading on" #test show symbol-reloading on gdb_test "show symbol-reloading" "Dynamic symbol table reloading multiple times in one run is on..*" "show symbol-reloading (on)" #test show user -gdb_test "show user" "" "show user" +gdb_test_no_output "show user" "show user" #test set verbose on -gdb_test "set verbose on" "" "set verbose on" +gdb_test_no_output "set verbose on" "set verbose on" #test show verbose on gdb_test "show verbose" "Verbose printing of informational messages is on..*" "show verbose (on)" #test set verbose off -gdb_test "set verbose off" "" "set verbose off" +gdb_test_no_output "set verbose off" "set verbose off" #test show verbose off gdb_test "show verbose" "Verbosity is off..*" "show verbose (off)" diff --git a/gdb/testsuite/gdb.base/setvar.exp b/gdb/testsuite/gdb.base/setvar.exp index d6dc131af06..c463ee3add6 100644 --- a/gdb/testsuite/gdb.base/setvar.exp +++ b/gdb/testsuite/gdb.base/setvar.exp @@ -133,11 +133,11 @@ test_set "set variable v_signed_char=65" "print v_signed_char" ".\[0-9\]* = 65 \ test_set "set variable v_signed_char=97" "print v_signed_char" ".\[0-9\]* = 97 \'a\'" "set variable signed char=97 ('a')" test_set "set variable v_signed_char=126" "print v_signed_char" ".\[0-9\]* = 126 \'~\'" "set variable signed char=126 ('~')" test_set "set variable v_signed_char=127" "print v_signed_char" ".\[0-9\]* = 127 \'.177\'" "set variable signed char=127 (8-bit)" -gdb_test "set variable v_signed_char=-1" "" +gdb_test_no_output "set variable v_signed_char=-1" if {!$gcc_compiled} then { setup_xfail "mips-sgi-irix4*" } gdb_test "print v_signed_char" ".\[0-9\]* = -1 \'.377\'" \ "set variable signed char=-1 (-1)" -gdb_test "set variable v_signed_char=0xFF" "" +gdb_test_no_output "set variable v_signed_char=0xFF" if {!$gcc_compiled} then { setup_xfail "mips-sgi-irix4*" } gdb_test "print v_signed_char" ".\[0-9\]* = -1 \'.377\'" \ "set variable signed char=0xFF (0xFF)" @@ -294,18 +294,18 @@ test_set "set v_short_pointer=v_short_array" "set variable *(v_short_pointer)=12 # # test "set variable" for type "signed short *" # -gdb_test "set v_signed_short_pointer=v_signed_short_array" "" -gdb_test "set variable *(v_signed_short_pointer)=123" "" -gdb_test "set variable *(v_signed_short_pointer+1)=-456" "" +gdb_test_no_output "set v_signed_short_pointer=v_signed_short_array" +gdb_test_no_output "set variable *(v_signed_short_pointer)=123" +gdb_test_no_output "set variable *(v_signed_short_pointer+1)=-456" gdb_test "print v_signed_short_array" ".\[0-9\]* =.*\\{123,.*-456\\}" \ "set variable signed short pointer" gdb_test "print *(v_signed_short_pointer+1)" ".\[0-9\]*.*=.*-456" # # test "set variable" for type "unsigned short *" # -gdb_test "set v_unsigned_short_pointer=v_unsigned_short_array" "" -gdb_test "set variable *(v_unsigned_short_pointer)=123" "" -gdb_test "set variable *(v_unsigned_short_pointer+1)=-456" "" +gdb_test_no_output "set v_unsigned_short_pointer=v_unsigned_short_array" +gdb_test_no_output "set variable *(v_unsigned_short_pointer)=123" +gdb_test_no_output "set variable *(v_unsigned_short_pointer+1)=-456" gdb_test "print v_unsigned_short_array" ".\[0-9\]* =.*\\{123,.*65080\\}" \ "set variable unsigned short pointer" gdb_test "print *(v_unsigned_short_pointer+1)" ".\[0-9\]* = 65080" diff --git a/gdb/testsuite/gdb.base/signals.exp b/gdb/testsuite/gdb.base/signals.exp index e0e823276e9..109996facac 100644 --- a/gdb/testsuite/gdb.base/signals.exp +++ b/gdb/testsuite/gdb.base/signals.exp @@ -80,7 +80,7 @@ if [runto_main] then { # Since count is a static variable outside main, runto_main is no # guarantee that count will be 0 at this point. - gdb_test "set variable count = 0" "" + gdb_test_no_output "set variable count = 0" # Test an inferior function call that takes a signal that hits a # breakpoint (with a false condition). When GDB tries to run the @@ -91,7 +91,7 @@ if [runto_main] then { # ...setup an always false conditional breakpoint gdb_test "break handler if 0" "Breakpoint \[0-9\]+ .*" - gdb_test "set \$handler_breakpoint_number = \$bpnum" "" + gdb_test_no_output "set \$handler_breakpoint_number = \$bpnum" # ...setup the signal diff --git a/gdb/testsuite/gdb.base/signull.exp b/gdb/testsuite/gdb.base/signull.exp index aec6bee0654..ebf1586419e 100644 --- a/gdb/testsuite/gdb.base/signull.exp +++ b/gdb/testsuite/gdb.base/signull.exp @@ -77,7 +77,8 @@ gdb_test_multiple "x 0" "memory at address 0" { # then function pointers are descriptors, probe this and remember the # result. -gdb_test "set test = code_entry_point" "" "set for function pointer probe" +gdb_test_no_output "set test = code_entry_point" \ + "set for function pointer probe" set test "probe function pointer" set function_pointer code_entry_point set signame "SIGSEGV" @@ -112,7 +113,7 @@ proc test_segv { name tag bt_from_segv bt_from_keeper } { global signame gdb_test continue "Breakpoint.* bowler.*" "${name}; start with the bowler" # NB: Don't use $tag in the testname - changes across systems. - gdb_test "set test = $tag" "" "${name}; select the pointer type" + gdb_test_no_output "set test = $tag" "${name}; select the pointer type" gdb_test continue "Program received signal ${signame}.*" \ "${name}; take the ${signame}" gdb_test backtrace $bt_from_segv "${name}; backtrace from ${signame}" diff --git a/gdb/testsuite/gdb.base/sigstep.exp b/gdb/testsuite/gdb.base/sigstep.exp index e0c236a23f5..8bdd514688d 100644 --- a/gdb/testsuite/gdb.base/sigstep.exp +++ b/gdb/testsuite/gdb.base/sigstep.exp @@ -196,7 +196,7 @@ advancei nexti advancei finish advancei return -gdb_test "set done = 1" "" "Set done as return will have skipped it" +gdb_test_no_output "set done = 1" "Set done as return will have skipped it" # Check that we can step/next our way into / over a signal handler. @@ -209,7 +209,7 @@ gdb_test "set done = 1" "" "Set done as return will have skipped it" delete_breakpoints set infinite_loop [gdb_get_line_number {while (!done)}] -gdb_test "set itimer = itimer_real" +gdb_test_no_output "set itimer = itimer_real" gdb_test "break [gdb_get_line_number {done = 0}]" # Try stepping when there's a signal pending, and a breakpoint at the @@ -230,15 +230,15 @@ proc skip_to_handler { i } { } # Advance to the infinite loop - gdb_test "advance $infinite_loop" "" "$prefix; advance to infinite loop" + gdb_test "advance $infinite_loop" ".*" "$prefix; advance to infinite loop" # Make the signal pending sleep 1 # Insert / remove the handler breakpoint. - gdb_test "break handler" "" "$prefix; break handler" + gdb_test "break handler" ".*" "$prefix; break handler" gdb_test "$i" " handler .*" "$prefix; performing $i" - gdb_test "clear handler" "" "$prefix; clear handler" + gdb_test "clear handler" ".*" "$prefix; clear handler" } skip_to_handler step @@ -271,15 +271,15 @@ proc skip_to_handler_entry { i } { } # Advance to the infinite loop - gdb_test "advance $infinite_loop" "" "$prefix; advance to infinite loop" + gdb_test "advance $infinite_loop" ".*" "$prefix; advance to infinite loop" # Make the signal pending sleep 1 # Insert / remove the handler breakpoint. - gdb_test "break *handler" "" "$prefix; break handler" + gdb_test "break *handler" ".*" "$prefix; break handler" gdb_test "$i" " handler .*" "$prefix; performing $i" - gdb_test "clear *handler" "" "$prefix; clear handler" + gdb_test "clear *handler" ".*" "$prefix; clear handler" } skip_to_handler_entry step @@ -304,7 +304,7 @@ proc skip_over_handler { i } { } # Advance to the infinite loop - gdb_test "advance $infinite_loop" "" "$prefix; advance to infinite loop" + gdb_test "advance $infinite_loop" ".*" "$prefix; advance to infinite loop" # Make the signal pending sleep 1 @@ -334,8 +334,8 @@ proc breakpoint_to_handler { i } { } } - gdb_test "break $infinite_loop" "" "$prefix; break infinite loop" - gdb_test "break handler" "" "$prefix; break handler" + gdb_test "break $infinite_loop" ".*" "$prefix; break infinite loop" + gdb_test "break handler" ".*" "$prefix; break handler" # Continue to the infinite loop gdb_test "continue" "while ..done.*" "$prefix; continue to infinite loop" @@ -344,8 +344,8 @@ proc breakpoint_to_handler { i } { sleep 1 gdb_test "$i" " handler .*" "$prefix; performing $i" - gdb_test "clear $infinite_loop" "" "$prefix; clear infinite loop" - gdb_test "clear handler" "" "$prefix; clear handler" + gdb_test "clear $infinite_loop" ".*" "$prefix; clear infinite loop" + gdb_test "clear handler" ".*" "$prefix; clear handler" } breakpoint_to_handler step @@ -378,8 +378,8 @@ proc breakpoint_to_handler_entry { i } { } } - gdb_test "break $infinite_loop" "" "$prefix; break infinite loop" - gdb_test "break *handler" "" "$prefix; break handler" + gdb_test "break $infinite_loop" ".*" "$prefix; break infinite loop" + gdb_test "break *handler" ".*" "$prefix; break handler" # Continue to the infinite loop gdb_test "continue" "while ..done.*" "$prefix; continue to infinite loop" @@ -388,8 +388,8 @@ proc breakpoint_to_handler_entry { i } { sleep 1 gdb_test "$i" " handler .*" "$prefix; performing $i" - gdb_test "clear $infinite_loop" "" "$prefix; clear infinite loop" - gdb_test "clear *handler" "" "$prefix; clear handler" + gdb_test "clear $infinite_loop" ".*" "$prefix; clear infinite loop" + gdb_test "clear *handler" ".*" "$prefix; clear handler" } breakpoint_to_handler_entry step @@ -414,7 +414,7 @@ proc breakpoint_over_handler { i } { } } - gdb_test "break $infinite_loop" "" "$prefix; break infinite loop" + gdb_test "break $infinite_loop" ".*" "$prefix; break infinite loop" # Continue to the infinite loop gdb_test "continue" "while ..done.*" "$prefix; continue to infinite loop" @@ -423,7 +423,7 @@ proc breakpoint_over_handler { i } { sleep 1 gdb_test "$i" "done = 0.*" "$prefix; performing $i" - gdb_test "clear $infinite_loop" "" "$prefix; clear infinite loop" + gdb_test "clear $infinite_loop" ".*" "$prefix; clear infinite loop" } breakpoint_over_handler step diff --git a/gdb/testsuite/gdb.base/sizeof.exp b/gdb/testsuite/gdb.base/sizeof.exp index dfa03eabd83..4e003634db0 100644 --- a/gdb/testsuite/gdb.base/sizeof.exp +++ b/gdb/testsuite/gdb.base/sizeof.exp @@ -119,7 +119,7 @@ check_valueof "(int) (unsigned char) -1" ${signof_unsigned_char} proc check_padding { fmt type val } { global gdb_prompt - gdb_test "set padding_${type}.v = ${val}" + gdb_test_no_output "set padding_${type}.v = ${val}" gdb_test "print padding_${type}.p1" "= \"The quick brown \"" gdb_test "print${fmt} padding_${type}.v" "= ${val}" gdb_test "print padding_${type}.p2" "\"The quick brown \".*" diff --git a/gdb/testsuite/gdb.base/solib-corrupted.exp b/gdb/testsuite/gdb.base/solib-corrupted.exp index 5a0c52d45c8..741984c5be2 100644 --- a/gdb/testsuite/gdb.base/solib-corrupted.exp +++ b/gdb/testsuite/gdb.base/solib-corrupted.exp @@ -26,7 +26,7 @@ if ![runto_main] { return } -gdb_test "info sharedlibrary" "" "normal list" +gdb_test "info sharedlibrary" "From * To .*" "normal list" # GDB checks there for matching L_PREV. set test "make solibs looping" diff --git a/gdb/testsuite/gdb.base/solib-disc.exp b/gdb/testsuite/gdb.base/solib-disc.exp index e6fdbe90919..54d7b53967b 100644 --- a/gdb/testsuite/gdb.base/solib-disc.exp +++ b/gdb/testsuite/gdb.base/solib-disc.exp @@ -59,7 +59,7 @@ if ![runto_main] then { return 0 } -gdb_test "set stop-on-solib-events 1" "" +gdb_test_no_output "set stop-on-solib-events 1" gdb_test "continue" "Stopped due to shared library event" "continue to load" diff --git a/gdb/testsuite/gdb.base/solib-symbol.exp b/gdb/testsuite/gdb.base/solib-symbol.exp index 0ec53a79354..a38d80a53ae 100644 --- a/gdb/testsuite/gdb.base/solib-symbol.exp +++ b/gdb/testsuite/gdb.base/solib-symbol.exp @@ -60,7 +60,7 @@ delete_breakpoints # Break in the library. gdb_test "br foo" \ - "" \ + "Breakpoint.*file.*${srcfile_lib}.*" \ "foo in libmd" gdb_test "continue" \ diff --git a/gdb/testsuite/gdb.base/source.exp b/gdb/testsuite/gdb.base/source.exp index 05e654857f9..c3bb158c237 100644 --- a/gdb/testsuite/gdb.base/source.exp +++ b/gdb/testsuite/gdb.base/source.exp @@ -49,7 +49,7 @@ gdb_test_multiple "source ${srcdir}/${subdir}/source-test.gdb" $test { } } -gdb_test "dir ${srcdir}/${subdir}" "" +gdb_test "dir ${srcdir}/${subdir}" "Source directories searched: .*" gdb_test "source -s ./source-test.gdb" \ "test source options" \ "source -s" diff --git a/gdb/testsuite/gdb.base/step-bt.exp b/gdb/testsuite/gdb.base/step-bt.exp index 6b4139034f9..9ac46023254 100644 --- a/gdb/testsuite/gdb.base/step-bt.exp +++ b/gdb/testsuite/gdb.base/step-bt.exp @@ -56,7 +56,7 @@ gdb_expect { } gdb_test "stepi" \ - "" \ + ".*" \ "step first instruction" gdb_test "bt" \ @@ -64,7 +64,7 @@ gdb_test "bt" \ "backtrace after first instruction step" gdb_test "stepi" \ - "" \ + ".*" \ "step second instruction" gdb_test "bt" \ diff --git a/gdb/testsuite/gdb.base/store.exp b/gdb/testsuite/gdb.base/store.exp index 7bd54656e7b..6b3054d6569 100644 --- a/gdb/testsuite/gdb.base/store.exp +++ b/gdb/testsuite/gdb.base/store.exp @@ -63,7 +63,7 @@ proc check_set { t l r new add } { "${prefix}; print old l, expecting ${l}" gdb_test "print r" " = ${r}" \ "${prefix}; print old r, expecting ${r}" - gdb_test "set variable l = 4" "" \ + gdb_test_no_output "set variable l = 4" \ "${prefix}; setting l to 4" gdb_test "print l" " = ${new}" \ "${prefix}; print new l, expecting ${new}" @@ -95,7 +95,7 @@ proc up_set { t l r new } { "${prefix}; print old l, expecting ${l}" gdb_test "print r" " = ${r}" \ "${prefix}; print old r, expecting ${r}" - gdb_test "set variable l = 4" "" \ + gdb_test_no_output "set variable l = 4" \ "${prefix}; set l to 4" gdb_test "print l" " = ${new}" \ "${prefix}; print new l, expecting ${new}" @@ -121,7 +121,7 @@ proc check_struct { t old new } { "${prefix}; next to add_struct_${t} call" gdb_test "print u" " = ${old}" \ "${prefix}; print old u, expecting ${old}" - gdb_test "set variable u = s_${t}" "" \ + gdb_test_no_output "set variable u = s_${t}" \ "${prefix}; set u to s_${t}" gdb_test "print u" " = ${new}" \ "${prefix}; print new u, expecting ${new}" @@ -141,7 +141,7 @@ proc up_struct { t old new } { "${prefix}; up" gdb_test "print u" " = ${old}" \ "${prefix}; print old u, expecting ${old}" - gdb_test "set variable u = s_${t}" "" \ + gdb_test_no_output "set variable u = s_${t}" \ "${prefix}; set u to s_${t}" gdb_test "print u" " = ${new}" \ "${prefix}; print new u, expecting ${new}" @@ -166,25 +166,25 @@ proc check_field { t } { gdb_test "next" "(return u;|\})" "next field ${t}" gdb_test "print u" " = {i = 1, j = 1, k = 1}" "old field ${t}" - gdb_test "set variable u = F_${t}" + gdb_test_no_output "set variable u = F_${t}" gdb_test "print u" " = {i = 0, j = 0, k = 0}" "new field ${t}" - gdb_test "set variable u = F_${t}, u.i = f_${t}.i" + gdb_test_no_output "set variable u = F_${t}, u.i = f_${t}.i" gdb_test "print u" " = {i = 1, j = 0, k = 0}" "f_${t}.i" - gdb_test "set variable u = F_${t}, u.j = f_${t}.j" + gdb_test_no_output "set variable u = F_${t}, u.j = f_${t}.j" gdb_test "print u" " = {i = 0, j = 1, k = 0}" "f_${t}.j" - gdb_test "set variable u = F_${t}, u.k = f_${t}.k" + gdb_test_no_output "set variable u = F_${t}, u.k = f_${t}.k" gdb_test "print u" " = {i = 0, j = 0, k = 1}" "f_${t}.k" - gdb_test "set variable u = f_${t}, u.i = F_${t}.i" + gdb_test_no_output "set variable u = f_${t}, u.i = F_${t}.i" gdb_test "print u" " = {i = 0, j = 1, k = 1}" "F_${t}.i" - gdb_test "set variable u = f_${t}, u.j = F_${t}.j" + gdb_test_no_output "set variable u = f_${t}, u.j = F_${t}.j" gdb_test "print u" " = {i = 1, j = 0, k = 1}" "F_${t}.j" - gdb_test "set variable u = f_${t}, u.k = F_${t}.k" + gdb_test_no_output "set variable u = f_${t}, u.k = F_${t}.k" gdb_test "print u" " = {i = 1, j = 1, k = 0}" "F_${t}.k" } diff --git a/gdb/testsuite/gdb.base/structs.exp b/gdb/testsuite/gdb.base/structs.exp index c7390848cf8..789c084fa39 100644 --- a/gdb/testsuite/gdb.base/structs.exp +++ b/gdb/testsuite/gdb.base/structs.exp @@ -89,14 +89,10 @@ proc start_structs_test { types } { gdb_load ${binfile} # Make certain that the output is consistent - gdb_test "set print sevenbit-strings" "" \ - "set print sevenbit-strings; ${testfile}" - gdb_test "set print address off" "" \ - "set print address off; ${testfile}" - gdb_test "set width 0" "" \ - "set width 0; ${testfile}" - gdb_test "set print elements 300" "" \ - "set print elements 300; ${testfile}" + gdb_test_no_output "set print sevenbit-strings" + gdb_test_no_output "set print address off" + gdb_test_no_output "set width 0" + gdb_test_no_output "set print elements 300" # Advance to main if { ![runto_main] } then { @@ -261,7 +257,7 @@ proc test_struct_calls { n } { # stores its parameter in the global variable "L$N". GDB then # examining that global to confirm that the value is as expected. - gdb_test "call Fun${n}(foo${n})" "" "call Fun<n>(foo<n>); ${tests}" + gdb_test_no_output "call Fun${n}(foo${n})" "call Fun<n>(foo<n>); ${tests}" setup_compiler_kfails structs-tc-tll gcc-3-3-* "DWARF 2" i*86-*-* gdb/1455 setup_compiler_kfails structs-tc-td gcc-3-3-* "DWARF 2" i*86-*-* gdb/1455 gdb_test "p/c L${n}" [foo ${n}] "p/c L<n>; ${tests}" diff --git a/gdb/testsuite/gdb.base/structs2.exp b/gdb/testsuite/gdb.base/structs2.exp index d2af02c0fd8..04b1a534ae1 100644 --- a/gdb/testsuite/gdb.base/structs2.exp +++ b/gdb/testsuite/gdb.base/structs2.exp @@ -45,7 +45,7 @@ gdb_start gdb_reinitialize_dir $srcdir/$subdir gdb_load ${binfile} -gdb_test "set width 0" "" +gdb_test_no_output "set width 0" if { ![runto_main] } then { gdb_suppress_tests diff --git a/gdb/testsuite/gdb.base/subst.exp b/gdb/testsuite/gdb.base/subst.exp index b7f0ab2f504..b18453dcd3b 100644 --- a/gdb/testsuite/gdb.base/subst.exp +++ b/gdb/testsuite/gdb.base/subst.exp @@ -24,8 +24,7 @@ gdb_reinitialize_dir $srcdir/$subdir # Do a bunch of testing of the set/unset/show substitute-path # commands that do not require the presence of an executable. -gdb_test "set confirm off" \ - "" \ +gdb_test_no_output "set confirm off" \ "deactivate GDB's confirmation interface" gdb_test "show substitute-path" \ @@ -44,8 +43,7 @@ gdb_test "unset substitute-path from" \ "No substitution rule defined for `from'" \ "unset substitute-path from, no rule entered yet" -gdb_test "unset substitute-path" \ - "" \ +gdb_test_no_output "unset substitute-path" \ "unset substitute-path, no rule entered yet" gdb_test "unset substitute-path from" \ @@ -68,24 +66,19 @@ gdb_test "set substitute-path '' to" \ "First argument must be at least one character long" \ "set substitute-path, first argument is empty string" -gdb_test "set substitute-path from to" \ - "" \ +gdb_test_no_output "set substitute-path from to" \ "add from -> to substitution rule" -gdb_test "set substitute-path from1 to1/" \ - "" \ +gdb_test_no_output "set substitute-path from1 to1/" \ "add from1 -> to1 substitution rule" -gdb_test "set substitute-path source destination" \ - "" \ +gdb_test_no_output "set substitute-path source destination" \ "add source -> destination substitution rule" -gdb_test "set substitute-path depuis/ vers" \ - "" \ +gdb_test_no_output "set substitute-path depuis/ vers" \ "add depuis -> vers substitution rule" -gdb_test "set substitute-path empty ''" \ - "" \ +gdb_test_no_output "set substitute-path empty ''" \ "add substitution rule to empty string" gdb_test "show substitute-path" \ @@ -104,8 +97,7 @@ gdb_test "show substitute-path garbage" \ "Source path substitution rule matching `garbage':" \ "show substitute-path garbage, after all paths added" -gdb_test "unset substitute-path from" \ - "" \ +gdb_test_no_output "unset substitute-path from" \ "unset substitute-path from" gdb_test "show substitute-path from" \ @@ -120,24 +112,21 @@ gdb_test "unset substitute-path from" \ "No substitution rule defined for `from'" \ "unset substitute-path from after the rule was removed" -gdb_test "unset substitute-path depuis" \ - "" \ +gdb_test_no_output "unset substitute-path depuis" \ "unset substitute-path depuis (middle of list)" gdb_test "show substitute-path" \ "List of all source path substitution rules:\r\n +`from1' -> `to1'.\r\n +`source' -> `destination'.\r\n\ +`empty' -> `'." \ "show substitute-path after depuis rule removed" -gdb_test "unset substitute-path empty" \ - "" \ +gdb_test_no_output "unset substitute-path empty" \ "unset substitute-path empty (end of list)" gdb_test "show substitute-path" \ "List of all source path substitution rules:\r\n +`from1' -> `to1'.\r\n +`source' -> `destination'." \ "show substitute-path after empty rule removed" -gdb_test "unset substitute-path" \ - "" \ +gdb_test_no_output "unset substitute-path" \ "remove all remaining substitution rules" gdb_test "show substitute-path" \ diff --git a/gdb/testsuite/gdb.base/symbol-without-target_section.exp b/gdb/testsuite/gdb.base/symbol-without-target_section.exp index 08d4792c8bb..4a870b313ac 100644 --- a/gdb/testsuite/gdb.base/symbol-without-target_section.exp +++ b/gdb/testsuite/gdb.base/symbol-without-target_section.exp @@ -33,7 +33,9 @@ if {[build_executable ${testfile}.exp ${binmainfile} ${srcmainfile} {debug}] == } clean_restart ${binlibfile} -gdb_test "add-symbol-file ${objdir}/${subdir}/${binmainfile} 0" "" "add-symbol-file" \ - "add symbol table from file \".*\" at.*\\(y or n\\) " "y" +gdb_test "add-symbol-file ${objdir}/${subdir}/${binmainfile} 0" \ + "Reading symbols from .*" \ + "add-symbol-file" \ + "add symbol table from file \".*\" at.*\\(y or n\\) " "y" gdb_test "list main" gdb_test "print symbol_without_target_section" diff --git a/gdb/testsuite/gdb.base/term.exp b/gdb/testsuite/gdb.base/term.exp index e97e68bebe2..427aaeaa8f0 100644 --- a/gdb/testsuite/gdb.base/term.exp +++ b/gdb/testsuite/gdb.base/term.exp @@ -40,9 +40,10 @@ if { [prepare_for_testing term.exp term run.c] } { return -1 } -gdb_test "set print sevenbit-strings" "" "test set print sevenbit-strings" -gdb_test "set print address off" "" "test set print address off" -gdb_test "set width 0" "" "test set width 0" +gdb_test_no_output "set print sevenbit-strings" +gdb_test_no_output "set print address off" +gdb_test_no_output "set width 0" + gdb_test "info terminal" "No saved terminal information.*" "test info terminal" gdb_run_cmd 5 gdb_expect { diff --git a/gdb/testsuite/gdb.base/trace-commands.exp b/gdb/testsuite/gdb.base/trace-commands.exp index a2f858864d9..80676cd160d 100644 --- a/gdb/testsuite/gdb.base/trace-commands.exp +++ b/gdb/testsuite/gdb.base/trace-commands.exp @@ -62,7 +62,7 @@ gdb_expect_list "source -v" ".*$gdb_prompt $" { } # Turn on command tracing. -gdb_test "set trace-commands" "" "set trace-commands" +gdb_test_no_output "set trace-commands" "set trace-commands" # Make sure show trace-commands now gives 'on'. gdb_test "show trace-commands" \ diff --git a/gdb/testsuite/gdb.base/unwindonsignal.exp b/gdb/testsuite/gdb.base/unwindonsignal.exp index 6f00874c019..29c277d056b 100644 --- a/gdb/testsuite/gdb.base/unwindonsignal.exp +++ b/gdb/testsuite/gdb.base/unwindonsignal.exp @@ -62,9 +62,9 @@ gdb_test "continue" "Continuing.*Breakpoint \[0-9\]*, stop_here.*" \ "continue to breakpoint at stop_here" # Turn on unwindonsignal. -gdb_test "set unwindonsignal on" \ - "" \ +gdb_test_no_output "set unwindonsignal on" \ "setting unwindonsignal" + gdb_test "show unwindonsignal" \ "Unwinding of stack .* is on." \ "showing unwindonsignal" diff --git a/gdb/testsuite/gdb.base/valgrind-db-attach.exp b/gdb/testsuite/gdb.base/valgrind-db-attach.exp index 8382a66cadf..05540e78cba 100644 --- a/gdb/testsuite/gdb.base/valgrind-db-attach.exp +++ b/gdb/testsuite/gdb.base/valgrind-db-attach.exp @@ -74,7 +74,7 @@ gdb_test_multiple "" $test { gdb_test "" "" "eat first prompt" # Initialization from default_gdb_start. -gdb_test "set height 0" -gdb_test "set width 0" +gdb_test_no_output "set height 0" +gdb_test_no_output "set width 0" gdb_test "bt" "in main \\(.*\\) at .*${srcfile}:$double_free" diff --git a/gdb/testsuite/gdb.base/varargs.exp b/gdb/testsuite/gdb.base/varargs.exp index 3cde8ea5707..84840f27d91 100644 --- a/gdb/testsuite/gdb.base/varargs.exp +++ b/gdb/testsuite/gdb.base/varargs.exp @@ -87,7 +87,7 @@ if { $hp_aCC_compiler } { # even though the overload resolution mechanism says that the types # don't match. # - guo - gdb_test "set overload-resolution 0" "" + gdb_test_no_output "set overload-resolution 0" } gdb_test "print find_max1(5,1,2,3,4,5)" \ diff --git a/gdb/testsuite/gdb.base/watch-cond.exp b/gdb/testsuite/gdb.base/watch-cond.exp index 27071d40390..b79edc25674 100644 --- a/gdb/testsuite/gdb.base/watch-cond.exp +++ b/gdb/testsuite/gdb.base/watch-cond.exp @@ -69,8 +69,7 @@ gdb_test "continue" \ "Old value = 0.*New value = 1.*" \ "watchpoint on global2 variable triggers" -gdb_test "condition 2 *foo > 10" \ - "" \ +gdb_test_no_output "condition 2 *foo > 10" \ "condition of watchpoint 2 changes" gdb_test "continue" \ diff --git a/gdb/testsuite/gdb.base/watch_thread_num.exp b/gdb/testsuite/gdb.base/watch_thread_num.exp index e551a1ed893..f22626c95f6 100644 --- a/gdb/testsuite/gdb.base/watch_thread_num.exp +++ b/gdb/testsuite/gdb.base/watch_thread_num.exp @@ -55,7 +55,7 @@ if [target_info exists gdb,no_hardware_watchpoints] { gdb_test "watch shared_var thread 0" "Unknown thread 0\." "Watchpoint on invalid thread" gdb_test "watch shared_var thread" "A syntax error in expression, near `thread'\." "Invalid watch syntax" -gdb_test "Next 5" "" +gdb_test "Next 5" ".*" gdb_test "break thread_function" "Breakpoint \[0-9\].*" \ "Set breakpoint at thread_function" @@ -70,7 +70,7 @@ gdb_test_multiple "thread" "Thread command" { set thread_num "$expect_out(1,string)" -gdb_test "disable 2" "" "Disable breakpoint 2" +gdb_test_no_output "disable 2" "Disable breakpoint 2" gdb_test "watch shared_var thread $thread_num" "atchpoint 3: shared_var" "Watchpoint on shared variable" gdb_test "info breakpoint 3" "stop only in thread $thread_num" diff --git a/gdb/testsuite/gdb.base/watchpoint-cond-gone.exp b/gdb/testsuite/gdb.base/watchpoint-cond-gone.exp index fa442b44480..e3eacc9f0c0 100644 --- a/gdb/testsuite/gdb.base/watchpoint-cond-gone.exp +++ b/gdb/testsuite/gdb.base/watchpoint-cond-gone.exp @@ -32,7 +32,7 @@ if { [gdb_compile "${srcdir}/${subdir}/${srcfilestripped}" "${objfilestripped}" clean_restart ${testfile} # Problem does not occur otherwise. -gdb_test "set can-use-hw-watchpoints 0" +gdb_test_no_output "set can-use-hw-watchpoints 0" if ![runto_main] { return -1 @@ -42,7 +42,7 @@ gdb_breakpoint [gdb_get_line_number "watchpoint-here"] gdb_continue_to_breakpoint "Place to set the watchpoint" # The condition `c == 30' is the subject being tested. -gdb_test "watch c if c == 30" "" "Place the watchpoint" +gdb_test "watch c if c == 30" "atchpoint \[0-9\]*.*" "Place the watchpoint" # We may stay either in the function itself or only at the first instruction of # its caller depending on the epilogue unwinder (or valid epilogue CFI) presence. diff --git a/gdb/testsuite/gdb.base/watchpoint.exp b/gdb/testsuite/gdb.base/watchpoint.exp index cada4bac75b..5fa43e3f295 100644 --- a/gdb/testsuite/gdb.base/watchpoint.exp +++ b/gdb/testsuite/gdb.base/watchpoint.exp @@ -186,7 +186,7 @@ proc test_simple_watchpoint {} { gdb_test "break func1" "Breakpoint.*at.*" - gdb_test "set \$func1_breakpoint_number = \$bpnum" "" + gdb_test_no_output "set \$func1_breakpoint_number = \$bpnum" gdb_test "continue" "Continuing.*Breakpoint \[0-9\]*, func1.*" \ "continue to breakpoint at func1" @@ -201,7 +201,7 @@ proc test_simple_watchpoint {} { -re "Continuing.*Breakpoint.*func1.*$gdb_prompt $" { setup_xfail "m68*-*-*" 2597 fail "thought it hit breakpoint at func1 twice" - gdb_test "delete \$func1_breakpoint_number" "" + gdb_test_no_output "delete \$func1_breakpoint_number" gdb_test "continue" "\ Continuing.*\[Ww\]atchpoint.*ival3.*Old value = -1.*New value = 0.*ival3 = count;" \ "watchpoint hit, first time" @@ -214,7 +214,7 @@ Continuing.*\[Ww\]atchpoint.*ival3.*Old value = -1.*New value = 0.*ival3 = count # Check that the hit count is reported correctly gdb_test "info break" ".*watchpoint\[ \t\]+keep\[ \t\]+y\[ \t\]+ival3\r\n\[ \t]+breakpoint already hit 1 time.*" "Watchpoint hit count is 1" - gdb_test "delete \$func1_breakpoint_number" "" + gdb_test_no_output "delete \$func1_breakpoint_number" # Continue until the next change, from 0 to 1. gdb_test "cont" "Continuing.*\[Ww\]atchpoint.*ival3.*Old value = 0.*New value = 1.*ival3 = count; ival4 = count;.*" "watchpoint hit, second time" @@ -431,7 +431,7 @@ proc test_watchpoint_triggered_in_syscall {} { gdb_test "watch buf\[4\]" ".*\[Ww\]atchpoint \[0-9\]*: buf\\\[4\\\]" gdb_test "break marker4" ".*Breakpoint.*" - gdb_test "set doread = 1" "" + gdb_test_no_output "set doread = 1" # If we send_gdb "123\n" before gdb has switched the tty, then it goes # to gdb, not the inferior, and we lose. So that is why we have @@ -498,7 +498,7 @@ proc test_watchpoint_triggered_in_syscall {} { "continue to marker4" # Disable everything so we can finish the program at full speed - gdb_test "disable" "" "disable in test_watchpoint_triggered_in_syscall" + gdb_test_no_output "disable" "disable in test_watchpoint_triggered_in_syscall" if [target_info exists gdb,noresults] { return } @@ -528,7 +528,7 @@ proc test_complex_watchpoint {} { # In particular, test that a watch of stack-based things # is deleted when the stack-based things go out of scope. # - gdb_test "disable" "" "disable in test_complex_watchpoint" + gdb_test_no_output "disable" "disable in test_complex_watchpoint" gdb_test "break marker6" ".*Breakpoint.*" gdb_test "cont" "Continuing.*Breakpoint.*marker6 \\(\\).*" \ "continue to marker6" @@ -589,7 +589,7 @@ proc test_complex_watchpoint {} { "self-delete local watch in recursive call" # Disable everything so we can finish the program at full speed - gdb_test "disable" "" "disable in test_complex_watchpoint" + gdb_test_no_output "disable" "disable in test_complex_watchpoint" if [target_info exists gdb,noresults] { return } diff --git a/gdb/testsuite/gdb.base/whatis-exp.exp b/gdb/testsuite/gdb.base/whatis-exp.exp index a089ac739af..7a57ea38950 100644 --- a/gdb/testsuite/gdb.base/whatis-exp.exp +++ b/gdb/testsuite/gdb.base/whatis-exp.exp @@ -50,10 +50,10 @@ if ![runto_main] then { # test expressions with "int" types # -gdb_test "set variable x=14" "" "set variable x=14" -gdb_test "set variable y=2" "" "set variable y=2" -gdb_test "set variable z=2" "" "set variable z=2" -gdb_test "set variable w=3" "" "set variable w=3" +gdb_test_no_output "set variable x=14" "set variable x=14" +gdb_test_no_output "set variable y=2" "set variable y=2" +gdb_test_no_output "set variable z=2" "set variable z=2" +gdb_test_no_output "set variable w=3" "set variable w=3" gdb_test "print x" " = 14" "print value of x" gdb_test "print y" " = 2" "print value of y" |