diff options
Diffstat (limited to 'dev-lang/perl/files')
21 files changed, 0 insertions, 1286 deletions
diff --git a/dev-lang/perl/files/eblits/common-v50160001.eblit b/dev-lang/perl/files/eblits/common-v50160001.eblit deleted file mode 100644 index 2a8d815..0000000 --- a/dev-lang/perl/files/eblits/common-v50160001.eblit +++ /dev/null @@ -1,71 +0,0 @@ -# Copyright 1999-2012 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Id$ - -src_remove_dual_file() { - local i pkg ver - pkg="$1" - ver="$2" - shift 2 - case "${EBUILD_PHASE:-none}" in - postinst|postrm) - for i in "$@" ; do - alternatives_auto_makesym "${i}" "${i}-[0-9]*" - done - ;; - setup) - for i in "$@" ; do - if [[ -f ${EROOT}${i} && ! -h ${EROOT}${i} ]] ; then - has_version ${pkg} && ewarn "You must reinstall ${pkg} !" - break - fi - done - ;; - install) - for i in "$@" ; do - if ! [[ -f "${ED}"${i} ]] ; then - ewarn "${i} does not exist!" - continue - fi - mv "${ED}"${i}{,-${ver}-${P}} || die - done - ;; - esac -} - -src_remove_dual_man() { - local i pkg ver ff - pkg="$1" - ver="$2" - shift 2 - case "${EBUILD_PHASE:-none}" in - postinst|postrm) - for i in "$@" ; do - ff=`echo "${EROOT}${i%.[0-9]}-${ver}-${P}${i#${i%.[0-9]}}"*` - ff=${ff##*${i#${i%.[0-9]}}} - alternatives_auto_makesym "${i}${ff}" "${i%.[0-9]}-[0-9]*" - done - ;; - install) - for i in "$@" ; do - if ! [[ -f "${ED}"${i} ]] ; then - ewarn "${i} does not exist!" - continue - fi - mv "${ED}"${i} "${ED}"${i%.[0-9]}-${ver}-${P}${i#${i%.[0-9]}} || die - done - ;; - esac -} - -src_remove_dual() { - local i pkg ver - pkg="$1" - ver="$2" - shift 2 - for i in "$@" ; do - src_remove_dual_file "${pkg}" "${ver}" "/usr/bin/${i}" - src_remove_dual_man "${pkg}" "${ver}" "/usr/share/man/man1/${i}.1" - done -} - diff --git a/dev-lang/perl/files/eblits/common-v50240001.eblit b/dev-lang/perl/files/eblits/common-v50240001.eblit deleted file mode 100644 index 2a8d815..0000000 --- a/dev-lang/perl/files/eblits/common-v50240001.eblit +++ /dev/null @@ -1,71 +0,0 @@ -# Copyright 1999-2012 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Id$ - -src_remove_dual_file() { - local i pkg ver - pkg="$1" - ver="$2" - shift 2 - case "${EBUILD_PHASE:-none}" in - postinst|postrm) - for i in "$@" ; do - alternatives_auto_makesym "${i}" "${i}-[0-9]*" - done - ;; - setup) - for i in "$@" ; do - if [[ -f ${EROOT}${i} && ! -h ${EROOT}${i} ]] ; then - has_version ${pkg} && ewarn "You must reinstall ${pkg} !" - break - fi - done - ;; - install) - for i in "$@" ; do - if ! [[ -f "${ED}"${i} ]] ; then - ewarn "${i} does not exist!" - continue - fi - mv "${ED}"${i}{,-${ver}-${P}} || die - done - ;; - esac -} - -src_remove_dual_man() { - local i pkg ver ff - pkg="$1" - ver="$2" - shift 2 - case "${EBUILD_PHASE:-none}" in - postinst|postrm) - for i in "$@" ; do - ff=`echo "${EROOT}${i%.[0-9]}-${ver}-${P}${i#${i%.[0-9]}}"*` - ff=${ff##*${i#${i%.[0-9]}}} - alternatives_auto_makesym "${i}${ff}" "${i%.[0-9]}-[0-9]*" - done - ;; - install) - for i in "$@" ; do - if ! [[ -f "${ED}"${i} ]] ; then - ewarn "${i} does not exist!" - continue - fi - mv "${ED}"${i} "${ED}"${i%.[0-9]}-${ver}-${P}${i#${i%.[0-9]}} || die - done - ;; - esac -} - -src_remove_dual() { - local i pkg ver - pkg="$1" - ver="$2" - shift 2 - for i in "$@" ; do - src_remove_dual_file "${pkg}" "${ver}" "/usr/bin/${i}" - src_remove_dual_man "${pkg}" "${ver}" "/usr/share/man/man1/${i}.1" - done -} - diff --git a/dev-lang/perl/files/eblits/pkg_postinst-v50160001.eblit b/dev-lang/perl/files/eblits/pkg_postinst-v50160001.eblit deleted file mode 100644 index cc864d0..0000000 --- a/dev-lang/perl/files/eblits/pkg_postinst-v50160001.eblit +++ /dev/null @@ -1,67 +0,0 @@ -# Copyright 1999-2012 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Id$ - -eblit-perl-pkg_postinst() { - dual_scripts - - if [[ "${ROOT}" = "/" ]] ; then - local INC DIR file - INC=$(perl -e 'for $line (@INC) { next if $line eq "."; next if $line =~ m/'${SHORT_PV}'|etc|local|perl$/; print "$line\n" }') - einfo "Removing old .ph files" - for DIR in ${INC} ; do - if [[ -d "${DIR}" ]] ; then - for file in $(find "${DIR}" -name "*.ph" -type f ) ; do - rm -f "${file}" - einfo "<< ${file}" - done - fi - done - # Silently remove the now empty dirs - for DIR in ${INC} ; do - if [[ -d "${DIR}" ]] ; then - find "${DIR}" -depth -type d -print0 | xargs -0 -r rmdir &> /dev/null - fi - done - -# ebegin "Generating ConfigLocal.pm (ignore any error)" -# enc2xs -C - - einfo "Converting C header files to the corresponding Perl format (ignore any error)" - # Prefix note: unprefixed as this is all kernel/libc stuff that we never provide - pushd /usr/include >/dev/null - h2ph -Q -a -d "${EPREFIX}"${ARCH_LIB} \ - asm/termios.h syscall.h syslimits.h syslog.h sys/ioctl.h \ - sys/socket.h sys/time.h wait.h sysexits.h - popd >/dev/null - -# This has been moved into a function because rumor has it that a future release -# of portage will allow us to check what version was just removed - which means -# we will be able to invoke this only as needed :) - # Tried doing this via -z, but $INC is too big... - #if [[ "${INC}x" != "x" ]]; then - # cleaner_msg - #fi - fi -} - -cleaner_msg() { - eerror "You have had multiple versions of perl. It is recommended" - eerror "that you run perl-cleaner now. perl-cleaner will" - eerror "assist with this transition. This script is capable" - eerror "of cleaning out old .ph files, rebuilding modules for " - eerror "your new version of perl, as well as re-emerging" - eerror "applications that compiled against your old libperl$(get_libname)" - eerror - eerror "PLEASE DO NOT INTERRUPT THE RUNNING OF THIS SCRIPT." - eerror "Part of the rebuilding of applications compiled against " - eerror "your old libperl involves temporarily unmerging" - eerror "them - interruptions could leave you with unmerged" - eerror "packages before they can be remerged." - eerror "" - eerror "If you have run perl-cleaner and a package still gives" - eerror "you trouble, and re-emerging it fails to correct" - eerror "the problem, please check http://bugs.gentoo.org/" - eerror "for more information or to report a bug." - eerror "" -} diff --git a/dev-lang/perl/files/eblits/pkg_postinst-v50220001.eblit b/dev-lang/perl/files/eblits/pkg_postinst-v50220001.eblit deleted file mode 100644 index a268f78..0000000 --- a/dev-lang/perl/files/eblits/pkg_postinst-v50220001.eblit +++ /dev/null @@ -1,67 +0,0 @@ -# Copyright 1999-2015 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Id$ - -eblit-perl-pkg_postinst() { - dual_scripts - - if [[ "${ROOT}" = "/" ]] ; then - local INC DIR file - INC=$(perl -e 'for $line (@INC) { next if $line eq "."; next if $line =~ m/'${SHORT_PV}'|etc|local|perl$/; print "$line\n" }') - einfo "Removing old .ph files" - for DIR in ${INC} ; do - if [[ -d "${DIR}" ]] ; then - for file in $(find "${DIR}" -name "*.ph" -type f ) ; do - rm -f "${file}" - einfo "<< ${file}" - done - fi - done - # Silently remove the now empty dirs - for DIR in ${INC} ; do - if [[ -d "${DIR}" ]] ; then - find "${DIR}" -depth -type d -print0 | xargs -0 -r rmdir &> /dev/null - fi - done - -# ebegin "Generating ConfigLocal.pm (ignore any error)" -# enc2xs -C - - einfo "Converting C header files to the corresponding Perl format (ignore any error)" - # Prefix note: unprefixed as this is all kernel/libc stuff that we never provide - pushd /usr/include >/dev/null - h2ph -Q -a -d "${EPREFIX}"${ARCH_LIB} \ - asm/termios.h syscall.h syslimits.h syslog.h sys/ioctl.h \ - sys/socket.h sys/time.h wait.h sysexits.h - popd >/dev/null - -# This has been moved into a function because rumor has it that a future release -# of portage will allow us to check what version was just removed - which means -# we will be able to invoke this only as needed :) - # Tried doing this via -z, but $INC is too big... - #if [[ "${INC}x" != "x" ]]; then - # cleaner_msg - #fi - fi -} - -cleaner_msg() { - eerror "You have had multiple versions of perl. It is recommended" - eerror "that you run perl-cleaner now. perl-cleaner will" - eerror "assist with this transition. This script is capable" - eerror "of cleaning out old .ph files, rebuilding modules for " - eerror "your new version of perl, as well as re-emerging" - eerror "applications that compiled against your old libperl$(get_libname)" - eerror - eerror "PLEASE DO NOT INTERRUPT THE RUNNING OF THIS SCRIPT." - eerror "Part of the rebuilding of applications compiled against " - eerror "your old libperl involves temporarily unmerging" - eerror "them - interruptions could leave you with unmerged" - eerror "packages before they can be remerged." - eerror "" - eerror "If you have run perl-cleaner and a package still gives" - eerror "you trouble, and re-emerging it fails to correct" - eerror "the problem, please check http://bugs.gentoo.org/" - eerror "for more information or to report a bug." - eerror "" -} diff --git a/dev-lang/perl/files/eblits/pkg_postinst-v50240001.eblit b/dev-lang/perl/files/eblits/pkg_postinst-v50240001.eblit deleted file mode 100644 index 2603ef4..0000000 --- a/dev-lang/perl/files/eblits/pkg_postinst-v50240001.eblit +++ /dev/null @@ -1,36 +0,0 @@ -# Copyright 1999-2015 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Id$ - -eblit-perl-pkg_postinst() { - dual_scripts - - if [[ "${ROOT}" = "/" ]] ; then - local INC DIR file - INC=$(perl -e 'for $line (@INC) { next if $line eq "."; next if $line =~ m/'${SHORT_PV}'|etc|local|perl$/; print "$line\n" }') - einfo "Removing old .ph files" - for DIR in ${INC} ; do - if [[ -d "${DIR}" ]] ; then - for file in $(find "${DIR}" -name "*.ph" -type f ) ; do - rm -f "${file}" - einfo "<< ${file}" - done - fi - done - # Silently remove the now empty dirs - for DIR in ${INC} ; do - if [[ -d "${DIR}" ]] ; then - find "${DIR}" -depth -type d -print0 | xargs -0 -r rmdir &> /dev/null - fi - done - -# einfo "Converting C header files to the corresponding Perl format (ignore any error)" -# # Prefix note: unprefixed as this is all kernel/libc stuff that we never provide -# pushd /usr/include >/dev/null -# h2ph -Q -a -d "${EPREFIX}"${ARCH_LIB} \ -# asm/termios.h syscall.h syslimits.h syslog.h sys/ioctl.h \ -# sys/socket.h sys/time.h wait.h sysexits.h -# popd >/dev/null - - fi -} diff --git a/dev-lang/perl/files/eblits/pkg_postrm-v50160001.eblit b/dev-lang/perl/files/eblits/pkg_postrm-v50160001.eblit deleted file mode 100644 index 02b5944..0000000 --- a/dev-lang/perl/files/eblits/pkg_postrm-v50160001.eblit +++ /dev/null @@ -1,12 +0,0 @@ -# Copyright 1999-2012 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Id$ - -eblit-perl-pkg_postrm(){ - dual_scripts - -# if [[ -e ${ARCH_LIB}/Encode/ConfigLocal.pm ]] ; then -# ebegin "Removing ConfigLocal.pm" -# rm "${ARCH_LIB}/Encode/ConfigLocal.pm" -# fi -} diff --git a/dev-lang/perl/files/eblits/pkg_postrm-v50220001.eblit b/dev-lang/perl/files/eblits/pkg_postrm-v50220001.eblit deleted file mode 100644 index 5bead2a..0000000 --- a/dev-lang/perl/files/eblits/pkg_postrm-v50220001.eblit +++ /dev/null @@ -1,12 +0,0 @@ -# Copyright 1999-2015 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Id$ - -eblit-perl-pkg_postrm(){ - dual_scripts - -# if [[ -e ${ARCH_LIB}/Encode/ConfigLocal.pm ]] ; then -# ebegin "Removing ConfigLocal.pm" -# rm "${ARCH_LIB}/Encode/ConfigLocal.pm" -# fi -} diff --git a/dev-lang/perl/files/eblits/pkg_postrm-v50240001.eblit b/dev-lang/perl/files/eblits/pkg_postrm-v50240001.eblit deleted file mode 100644 index ed98a86..0000000 --- a/dev-lang/perl/files/eblits/pkg_postrm-v50240001.eblit +++ /dev/null @@ -1,7 +0,0 @@ -# Copyright 1999-2015 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Id$ - -eblit-perl-pkg_postrm(){ - dual_scripts -} diff --git a/dev-lang/perl/files/eblits/pkg_setup-v50160001.eblit b/dev-lang/perl/files/eblits/pkg_setup-v50160001.eblit deleted file mode 100644 index a7b734f..0000000 --- a/dev-lang/perl/files/eblits/pkg_setup-v50160001.eblit +++ /dev/null @@ -1,70 +0,0 @@ -# Copyright 1999-2013 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Id$ - -eblit-perl-pkg_setup() { - case ${CHOST} in - *-freebsd*) osname="freebsd" ;; - *-dragonfly*) osname="dragonfly" ;; - *-netbsd*) osname="netbsd" ;; - *-openbsd*) osname="openbsd" ;; - *-darwin*) osname="darwin" ;; - *-interix*) osname="interix" ;; - *-aix*) osname="aix" ;; - *) osname="linux" ;; - esac - - myarch="${CHOST%%-*}-${osname}" - if use debug ; then - myarch+="-debug" - fi - if use ithreads ; then - mythreading="-multi" - myarch+="-thread" - fi - - LIBPERL="libperl$(get_libname ${MY_PV} )" - PRIV_LIB="/usr/$(get_libdir)/perl5/${MY_PV}" - ARCH_LIB="/usr/$(get_libdir)/perl5/${MY_PV}/${myarch}${mythreading}" - SITE_LIB="/usr/local/$(get_libdir)/perl5/${MY_PV}" - SITE_ARCH="/usr/local/$(get_libdir)/perl5/${MY_PV}/${myarch}${mythreading}" - VENDOR_LIB="/usr/$(get_libdir)/perl5/vendor_perl/${MY_PV}" - VENDOR_ARCH="/usr/$(get_libdir)/perl5/vendor_perl/${MY_PV}/${myarch}${mythreading}" - - if use ithreads ; then - echo "" - ewarn "THREADS WARNING:" - ewarn "PLEASE NOTE: You are compiling ${MY_P} with" - ewarn "interpreter-level threading enabled." - ewarn "Threading is not supported by all applications " - ewarn "that compile against perl. You use threading at " - ewarn "your own discretion. " - fi - check_rebuild - dual_scripts -} - -check_rebuild() { - if has_version "<dev-lang/perl-${SHORT_PV}" ; then - echo "" - ewarn "UPDATE THE PERL MODULES:" - ewarn "After updating dev-lang/perl you must reinstall" - ewarn "the installed perl modules." - ewarn "Use: perl-cleaner --all" - elif has_version dev-lang/perl ; then - # doesnot work - #if ! has_version dev-lang/perl[ithreads=,debug=] ; then - #if ! has_version dev-lang/perl[ithreads=] || ! has_version dev-lang/perl[debug=] ; then - if ( use ithreads && ! has_version dev-lang/perl[ithreads] ) || \ - ( ! use ithreads && has_version dev-lang/perl[ithreads] ) || \ - ( use debug && ! has_version dev-lang/perl[debug] ) || \ - ( ! use debug && has_version dev-lang/perl[debug] ) ; then - echo "" - ewarn "TOGGLED USE-FLAGS WARNING:" - ewarn "You changed one of the use-flags ithreads or debug." - ewarn "You must rebuild all perl-modules installed." - ewarn "Use: perl-cleaner --modules ; perl-cleaner --force --libperl" - fi - fi -} - diff --git a/dev-lang/perl/files/eblits/pkg_setup-v50220001.eblit b/dev-lang/perl/files/eblits/pkg_setup-v50220001.eblit deleted file mode 100644 index a2b0957..0000000 --- a/dev-lang/perl/files/eblits/pkg_setup-v50220001.eblit +++ /dev/null @@ -1,72 +0,0 @@ -# Copyright 1999-2015 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Id$ - -eblit-perl-pkg_setup() { - case ${CHOST} in - *-freebsd*) osname="freebsd" ;; - *-dragonfly*) osname="dragonfly" ;; - *-netbsd*) osname="netbsd" ;; - *-openbsd*) osname="openbsd" ;; - *-darwin*) osname="darwin" ;; - *-interix*) osname="interix" ;; - *-aix*) osname="aix" ;; - *) osname="linux" ;; - esac - - myarch="${CHOST%%-*}-${osname}" - if use debug ; then - myarch+="-debug" - fi - if use ithreads ; then - mythreading="-multi" - myarch+="-thread" - fi - - LIBPERL="libperl$(get_libname ${MY_PV} )" - PRIV_LIB="/usr/$(get_libdir)/perl5/${MY_PV}" - ARCH_LIB="/usr/$(get_libdir)/perl5/${MY_PV}/${myarch}${mythreading}" - SITE_LIB="/usr/local/$(get_libdir)/perl5/${MY_PV}" - SITE_ARCH="/usr/local/$(get_libdir)/perl5/${MY_PV}/${myarch}${mythreading}" - VENDOR_LIB="/usr/$(get_libdir)/perl5/vendor_perl/${MY_PV}" - VENDOR_ARCH="/usr/$(get_libdir)/perl5/vendor_perl/${MY_PV}/${myarch}${mythreading}" - - if use ithreads ; then - echo "" - ewarn "THREADS WARNING:" - ewarn "PLEASE NOTE: You are compiling ${MY_P} with" - ewarn "interpreter-level threading enabled." - ewarn "Threading is not supported by all applications " - ewarn "that compile against perl. You use threading at " - ewarn "your own discretion. " - fi - check_rebuild - dual_scripts -} - -check_rebuild() { - if has_version "<dev-lang/perl-${SHORT_PV}" ; then - echo "" - ewarn "UPDATE THE PERL MODULES:" - ewarn "After updating dev-lang/perl the installed Perl modules will" - ewarn "have to be re-installed. In most cases, this is done automatically" - ewarn "by the package manager, but you should still call perl-cleaner to" - ewarn "make sure your system is consistent." - ewarn "Use: perl-cleaner --all" - elif has_version dev-lang/perl ; then - # doesnot work - #if ! has_version dev-lang/perl[ithreads=,debug=] ; then - #if ! has_version dev-lang/perl[ithreads=] || ! has_version dev-lang/perl[debug=] ; then - if ( use ithreads && ! has_version dev-lang/perl[ithreads] ) || \ - ( ! use ithreads && has_version dev-lang/perl[ithreads] ) || \ - ( use debug && ! has_version dev-lang/perl[debug] ) || \ - ( ! use debug && has_version dev-lang/perl[debug] ) ; then - echo "" - ewarn "TOGGLED USE-FLAGS WARNING:" - ewarn "You changed one of the use-flags ithreads or debug." - ewarn "You must rebuild all perl-modules installed." - ewarn "Use: perl-cleaner --modules ; perl-cleaner --force --libperl" - fi - fi -} - diff --git a/dev-lang/perl/files/eblits/pkg_setup-v50240001.eblit b/dev-lang/perl/files/eblits/pkg_setup-v50240001.eblit deleted file mode 100644 index 9ce8e99..0000000 --- a/dev-lang/perl/files/eblits/pkg_setup-v50240001.eblit +++ /dev/null @@ -1,66 +0,0 @@ -# Copyright 1999-2015 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Id$ - -eblit-perl-pkg_setup() { - case ${CHOST} in - *-freebsd*) osname="freebsd" ;; - *-dragonfly*) osname="dragonfly" ;; - *-netbsd*) osname="netbsd" ;; - *-openbsd*) osname="openbsd" ;; - *-darwin*) osname="darwin" ;; - *-interix*) osname="interix" ;; - *-aix*) osname="aix" ;; - *) osname="linux" ;; - esac - - myarch="${CHOST%%-*}-${osname}" - if use debug ; then - myarch+="-debug" - fi - if use ithreads ; then - mythreading="-multi" - myarch+="-thread" - fi - - LIBPERL="libperl$(get_libname ${MY_PV} )" - PRIV_LIB="/usr/$(get_libdir)/perl5/${MY_PV}" - ARCH_LIB="/usr/$(get_libdir)/perl5/${MY_PV}/${myarch}${mythreading}" - SITE_LIB="/usr/local/$(get_libdir)/perl5/${MY_PV}" - SITE_ARCH="/usr/local/$(get_libdir)/perl5/${MY_PV}/${myarch}${mythreading}" - VENDOR_LIB="/usr/$(get_libdir)/perl5/vendor_perl/${MY_PV}" - VENDOR_ARCH="/usr/$(get_libdir)/perl5/vendor_perl/${MY_PV}/${myarch}${mythreading}" - - if use ithreads ; then - echo "" - ewarn "THREADS WARNING" - ewarn "PLEASE NOTE: You are compiling ${MY_P} with interpreter-level threading enabled." - ewarn "Threading is not supported by all applications that compile against perl. You" - ewarn "use threading at your own discretion." - fi - check_rebuild - dual_scripts -} - -check_rebuild() { - if has_version "<dev-lang/perl-${SHORT_PV}" ; then - echo "" - ewarn "UPDATE THE PERL MODULES:" - ewarn "After updating dev-lang/perl the installed Perl modules will" - ewarn "have to be re-installed. In most cases, this is done automatically" - ewarn "by the package manager, but you should still call perl-cleaner to" - ewarn "make sure your system is consistent." - ewarn "Use: perl-cleaner --all" - elif has_version dev-lang/perl ; then - if ( use ithreads && ! has_version dev-lang/perl[ithreads] ) || \ - ( ! use ithreads && has_version dev-lang/perl[ithreads] ) || \ - ( use debug && ! has_version dev-lang/perl[debug] ) || \ - ( ! use debug && has_version dev-lang/perl[debug] ) ; then - echo "" - ewarn "TOGGLED USE-FLAGS WARNING:" - ewarn "You changed one of the use-flags ithreads or debug." - ewarn "You must rebuild all perl-modules installed." - ewarn "Use: perl-cleaner --modules ; perl-cleaner --force --libperl" - fi - fi -} diff --git a/dev-lang/perl/files/eblits/src_configure-v50180002.eblit b/dev-lang/perl/files/eblits/src_configure-v50180002.eblit deleted file mode 100644 index 05fa86b..0000000 --- a/dev-lang/perl/files/eblits/src_configure-v50180002.eblit +++ /dev/null @@ -1,188 +0,0 @@ -# Copyright 1999-2014 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Id$ - -myconf() { - # the myconf array is declared in src_configure - myconf=( "${myconf[@]}" "$@" ) -} - -eblit-perl-src_configure() { - declare -a myconf - - export LC_ALL="C" - [[ ${COLUMNS:-1} -ge 1 ]] || unset COLUMNS # bug #394091 - - # some arches and -O do not mix :) - use ppc && replace-flags -O? -O1 - # Perl has problems compiling with -Os in your flags with glibc - use elibc_uclibc || replace-flags "-Os" "-O2" - # This flag makes compiling crash in interesting ways - filter-flags "-malign-double" - # Fixes bug #97645 - use ppc && filter-flags "-mpowerpc-gpopt" - # Fixes bug #143895 on gcc-4.1.1 - filter-flags "-fsched2-use-superblocks" - - use sparc && myconf -Ud_longdbl - - export BUILD_BZIP2=0 - export BZIP2_INCLUDE=${EPREFIX}/usr/include - export BZIP2_LIB=${EPREFIX}/usr/$(get_libdir) - - export BUILD_ZLIB=False - export ZLIB_INCLUDE=${EPREFIX}/usr/include - export ZLIB_LIB=${EPREFIX}/usr/$(get_libdir) - - # allow either gdbm to provide ndbm (in <gdbm/ndbm.h>) or db1 - - myndbm='U' - mygdbm='U' - mydb='U' - - if use gdbm ; then - mygdbm='D' - myndbm='D' - fi - if use berkdb ; then - mydb='D' - has_version '=sys-libs/db-1*' && myndbm='D' - fi - - myconf "-${myndbm}i_ndbm" "-${mygdbm}i_gdbm" "-${mydb}i_db" - - if use alpha && [[ "$(tc-getCC)" = "ccc" ]] ; then - ewarn "Perl will not be built with berkdb support, use gcc if you needed it..." - myconf -Ui_db -Ui_ndbm - fi - - use ithreads && myconf -Dusethreads - - if use debug ; then - append-cflags "-g" - myconf -DDEBUGGING - elif [[ ${CFLAGS} == *-g* ]] ; then - myconf -DDEBUGGING=-g - else - myconf -DDEBUGGING=none - fi - - if [[ -n ${PERL_OLDVERSEN} ]] ; then - local inclist=$(for v in ${PERL_OLDVERSEN}; do echo -n "${v}/${myarch}${mythreading} ${v} "; done ) - myconf -Dinc_version_list="${inclist}" - fi - - [[ ${ELIBC} == "FreeBSD" ]] && myconf "-Dlibc=/usr/$(get_libdir)/libc.a" - - # Make sure we can do the final link #523730, need to set deployment - # target to override hardcoded 10.3 which breaks on modern OSX - [[ ${CHOST} == *-darwin* ]] && \ - myconf "-Dld=env MACOSX_DEPLOYMENT_TARGET=${MACOSX_DEPLOYMENT_TARGET} $(tc-getCC)" - - # Prefix: the host system needs not to follow Gentoo multilib stuff, and in - # Prefix itself we don't do multilib either, so make sure perl can find - # something compatible. - if use prefix ; then - # Set a hook to check for each detected library whether it actually works. - export libscheck=" - ( echo 'main(){}' > '${T}'/conftest.c && - $(tc-getCC) -o '${T}'/conftest '${T}'/conftest.c -l\$thislib >/dev/null 2>/dev/null - ) || xxx=/dev/null" - - # Use all host paths that might contain useful stuff, the hook above will filter out bad choices. - local paths="/lib/*-linux-gnu /usr/lib/*-linux-gnu /lib64 /lib/64 /usr/lib64 /usr/lib/64 /lib32 /usr/lib32 /lib /usr/lib" - myconf "-Dlibpth=${EPREFIX}/$(get_libdir) ${EPREFIX}/usr/$(get_libdir) ${paths}" - elif [[ $(get_libdir) != "lib" ]] ; then - # We need to use " and not ', as the written config.sh use ' ... - myconf "-Dlibpth=/usr/local/$(get_libdir) /$(get_libdir) /usr/$(get_libdir)" - fi - - # don't try building ODBM, bug #354453 - disabled_extensions="ODBM_File" - - if ! use gdbm ; then - # workaround for bug #157774: don't try building GDBM related stuff with USE="-gdbm" - disabled_extensions="${disabled_extensions} GDBM_File NDBM_File" - fi - - myconf -Dnoextensions="${disabled_extensions}" - - echo Configuring Perl as follows: - echo sh Configure \ - -des \ - -Duseshrplib \ - -Darchname="${myarch}" \ - -Dcc="$(tc-getCC)" \ - -Doptimize="${CFLAGS}" \ - -Dldflags="${LDFLAGS}" \ - -Dprefix="${EPREFIX}"'/usr' \ - -Dinstallprefix="${EPREFIX}"'/usr' \ - -Dsiteprefix="${EPREFIX}"'/usr/local' \ - -Dvendorprefix="${EPREFIX}"'/usr' \ - -Dscriptdir="${EPREFIX}"'/usr/bin' \ - -Dprivlib="${EPREFIX}${PRIV_LIB}" \ - -Darchlib="${EPREFIX}${ARCH_LIB}" \ - -Dsitelib="${EPREFIX}${SITE_LIB}" \ - -Dsitearch="${EPREFIX}${SITE_ARCH}" \ - -Dvendorlib="${EPREFIX}${VENDOR_LIB}" \ - -Dvendorarch="${EPREFIX}${VENDOR_ARCH}" \ - -Dman1dir="${EPREFIX}"/usr/share/man/man1 \ - -Dman3dir="${EPREFIX}"/usr/share/man/man3 \ - -Dsiteman1dir="${EPREFIX}"/usr/local/man/man1 \ - -Dsiteman3dir="${EPREFIX}"/usr/local/man/man3 \ - -Dvendorman1dir="${EPREFIX}"/usr/share/man/man1 \ - -Dvendorman3dir="${EPREFIX}"/usr/share/man/man3 \ - -Dman1ext='1' \ - -Dman3ext='3pm' \ - -Dlibperl="${LIBPERL}" \ - -Dlocincpth="${EPREFIX}"'/usr/include ' \ - -Dglibpth="${EPREFIX}/$(get_libdir) ${EPREFIX}/usr/$(get_libdir)"' ' \ - -Duselargefiles \ - -Dd_semctl_semun \ - -Dcf_by='Gentoo' \ - -Dmyhostname='localhost' \ - -Dperladmin='root@localhost' \ - -Dinstallusrbinperl='n' \ - -Ud_csh \ - -Uusenm \ - "${myconf[@]}" - - sh Configure \ - -des \ - -Duseshrplib \ - -Darchname="${myarch}" \ - -Dcc="$(tc-getCC)" \ - -Doptimize="${CFLAGS}" \ - -Dldflags="${LDFLAGS}" \ - -Dprefix="${EPREFIX}"'/usr' \ - -Dinstallprefix="${EPREFIX}"'/usr' \ - -Dsiteprefix="${EPREFIX}"'/usr/local' \ - -Dvendorprefix="${EPREFIX}"'/usr' \ - -Dscriptdir="${EPREFIX}"'/usr/bin' \ - -Dprivlib="${EPREFIX}${PRIV_LIB}" \ - -Darchlib="${EPREFIX}${ARCH_LIB}" \ - -Dsitelib="${EPREFIX}${SITE_LIB}" \ - -Dsitearch="${EPREFIX}${SITE_ARCH}" \ - -Dvendorlib="${EPREFIX}${VENDOR_LIB}" \ - -Dvendorarch="${EPREFIX}${VENDOR_ARCH}" \ - -Dman1dir="${EPREFIX}"/usr/share/man/man1 \ - -Dman3dir="${EPREFIX}"/usr/share/man/man3 \ - -Dsiteman1dir="${EPREFIX}"/usr/local/man/man1 \ - -Dsiteman3dir="${EPREFIX}"/usr/local/man/man3 \ - -Dvendorman1dir="${EPREFIX}"/usr/share/man/man1 \ - -Dvendorman3dir="${EPREFIX}"/usr/share/man/man3 \ - -Dman1ext='1' \ - -Dman3ext='3pm' \ - -Dlibperl="${LIBPERL}" \ - -Dlocincpth="${EPREFIX}"'/usr/include ' \ - -Dglibpth="${EPREFIX}/$(get_libdir) ${EPREFIX}/usr/$(get_libdir)"' ' \ - -Duselargefiles \ - -Dd_semctl_semun \ - -Dcf_by='Gentoo' \ - -Dmyhostname='localhost' \ - -Dperladmin='root@localhost' \ - -Dinstallusrbinperl='n' \ - -Ud_csh \ - -Uusenm \ - "${myconf[@]}" || die "Unable to configure" -} diff --git a/dev-lang/perl/files/eblits/src_configure-v50240001.eblit b/dev-lang/perl/files/eblits/src_configure-v50240001.eblit deleted file mode 100644 index 3ea553e..0000000 --- a/dev-lang/perl/files/eblits/src_configure-v50240001.eblit +++ /dev/null @@ -1,192 +0,0 @@ -# Copyright 1999-2014 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Id$ - -myconf() { - # the myconf array is declared in src_configure - myconf=( "${myconf[@]}" "$@" ) -} - -eblit-perl-src_configure() { - declare -a myconf - - export LC_ALL="C" - [[ ${COLUMNS:-1} -ge 1 ]] || unset COLUMNS # bug #394091 - - # some arches and -O do not mix :) - use ppc && replace-flags -O? -O1 - # Perl has problems compiling with -Os in your flags with glibc - use elibc_uclibc || replace-flags "-Os" "-O2" - # This flag makes compiling crash in interesting ways - filter-flags "-malign-double" - # Fixes bug #97645 - use ppc && filter-flags "-mpowerpc-gpopt" - # Fixes bug #143895 on gcc-4.1.1 - filter-flags "-fsched2-use-superblocks" - - use sparc && myconf -Ud_longdbl - - export BUILD_BZIP2=0 - export BZIP2_INCLUDE=${EPREFIX}/usr/include - export BZIP2_LIB=${EPREFIX}/usr/$(get_libdir) - - export BUILD_ZLIB=False - export ZLIB_INCLUDE=${EPREFIX}/usr/include - export ZLIB_LIB=${EPREFIX}/usr/$(get_libdir) - - # allow either gdbm to provide ndbm (in <gdbm/ndbm.h>) or db1 - - myndbm='U' - mygdbm='U' - mydb='U' - - if use gdbm ; then - mygdbm='D' - myndbm='D' - fi - if use berkdb ; then - mydb='D' - has_version '=sys-libs/db-1*' && myndbm='D' - fi - - myconf "-${myndbm}i_ndbm" "-${mygdbm}i_gdbm" "-${mydb}i_db" - - if use alpha && [[ "$(tc-getCC)" = "ccc" ]] ; then - ewarn "Perl will not be built with berkdb support, use gcc if you needed it..." - myconf -Ui_db -Ui_ndbm - fi - - use ithreads && myconf -Dusethreads - - if use debug ; then - append-cflags "-g" - myconf -DDEBUGGING - elif [[ ${CFLAGS} == *-g* ]] ; then - myconf -DDEBUGGING=-g - else - myconf -DDEBUGGING=none - fi - - if [[ -n ${PERL_OLDVERSEN} ]] ; then - local inclist=$(for v in ${PERL_OLDVERSEN}; do echo -n "${v}/${myarch}${mythreading} ${v} "; done ) - myconf -Dinc_version_list="${inclist}" - fi - - [[ ${ELIBC} == "FreeBSD" ]] && myconf "-Dlibc=/usr/$(get_libdir)/libc.a" - - # Make sure we can do the final link #523730, need to set deployment - # target to override hardcoded 10.3 which breaks on modern OSX - [[ ${CHOST} == *-darwin* ]] && \ - myconf "-Dld=env MACOSX_DEPLOYMENT_TARGET=${MACOSX_DEPLOYMENT_TARGET} $(tc-getCC)" - - # Prefix: the host system needs not to follow Gentoo multilib stuff, and in - # Prefix itself we don't do multilib either, so make sure perl can find - # something compatible. - if use prefix ; then - # Set a hook to check for each detected library whether it actually works. - export libscheck=" - ( echo 'main(){}' > '${T}'/conftest.c && - $(tc-getCC) -o '${T}'/conftest '${T}'/conftest.c -l\$thislib >/dev/null 2>/dev/null - ) || xxx=/dev/null" - - # Use all host paths that might contain useful stuff, the hook above will filter out bad choices. - local paths="/lib/*-linux-gnu /usr/lib/*-linux-gnu /lib64 /lib/64 /usr/lib64 /usr/lib/64 /lib32 /usr/lib32 /lib /usr/lib" - myconf "-Dlibpth=${EPREFIX}/$(get_libdir) ${EPREFIX}/usr/$(get_libdir) ${paths}" - elif [[ $(get_libdir) != "lib" ]] ; then - # We need to use " and not ', as the written config.sh use ' ... - myconf "-Dlibpth=/usr/local/$(get_libdir) /$(get_libdir) /usr/$(get_libdir)" - fi - - # don't try building ODBM, bug #354453 - disabled_extensions="ODBM_File" - - if ! use gdbm ; then - # workaround for bug #157774: don't try building GDBM related stuff with USE="-gdbm" - disabled_extensions="${disabled_extensions} GDBM_File NDBM_File" - fi - - myconf -Dnoextensions="${disabled_extensions}" - - echo Configuring Perl as follows: - echo sh Configure \ - -des \ - -Duseshrplib \ - -Darchname="${myarch}" \ - -Dcc="$(tc-getCC)" \ - -Doptimize="${CFLAGS}" \ - -Dldflags="${LDFLAGS}" \ - -Dprefix="${EPREFIX}"'/usr' \ - -Dinstallprefix="${EPREFIX}"'/usr' \ - -Dsiteprefix="${EPREFIX}"'/usr/local' \ - -Dvendorprefix="${EPREFIX}"'/usr' \ - -Dscriptdir="${EPREFIX}"'/usr/bin' \ - -Dprivlib="${EPREFIX}${PRIV_LIB}" \ - -Darchlib="${EPREFIX}${ARCH_LIB}" \ - -Dsitelib="${EPREFIX}${SITE_LIB}" \ - -Dsitearch="${EPREFIX}${SITE_ARCH}" \ - -Dvendorlib="${EPREFIX}${VENDOR_LIB}" \ - -Dvendorarch="${EPREFIX}${VENDOR_ARCH}" \ - -Dman1dir="${EPREFIX}"/usr/share/man/man1 \ - -Dman3dir="${EPREFIX}"/usr/share/man/man3 \ - -Dsiteman1dir="${EPREFIX}"/usr/local/man/man1 \ - -Dsiteman3dir="${EPREFIX}"/usr/local/man/man3 \ - -Dvendorman1dir="${EPREFIX}"/usr/share/man/man1 \ - -Dvendorman3dir="${EPREFIX}"/usr/share/man/man3 \ - -Dman1ext='1' \ - -Dman3ext='3pm' \ - -Dlibperl="${LIBPERL}" \ - -Dlocincpth="${EPREFIX}"'/usr/include ' \ - -Dglibpth="${EPREFIX}/$(get_libdir) ${EPREFIX}/usr/$(get_libdir)"' ' \ - -Duselargefiles \ - -Dd_semctl_semun \ - -Dcf_by='Gentoo' \ - -Dmyhostname='localhost' \ - -Dperladmin='root@localhost' \ - -Dinstallusrbinperl='n' \ - -Ud_csh \ - -Dsh="${EPREFIX}"/bin/sh \ - -Dtargetsh="${EPREFIX}"/bin/sh \ - -Uusenm \ - "${myconf[@]}" - - sh Configure \ - -des \ - -Duseshrplib \ - -Darchname="${myarch}" \ - -Dcc="$(tc-getCC)" \ - -Doptimize="${CFLAGS}" \ - -Dldflags="${LDFLAGS}" \ - -Dprefix="${EPREFIX}"'/usr' \ - -Dinstallprefix="${EPREFIX}"'/usr' \ - -Dsiteprefix="${EPREFIX}"'/usr/local' \ - -Dvendorprefix="${EPREFIX}"'/usr' \ - -Dscriptdir="${EPREFIX}"'/usr/bin' \ - -Dprivlib="${EPREFIX}${PRIV_LIB}" \ - -Darchlib="${EPREFIX}${ARCH_LIB}" \ - -Dsitelib="${EPREFIX}${SITE_LIB}" \ - -Dsitearch="${EPREFIX}${SITE_ARCH}" \ - -Dvendorlib="${EPREFIX}${VENDOR_LIB}" \ - -Dvendorarch="${EPREFIX}${VENDOR_ARCH}" \ - -Dman1dir="${EPREFIX}"/usr/share/man/man1 \ - -Dman3dir="${EPREFIX}"/usr/share/man/man3 \ - -Dsiteman1dir="${EPREFIX}"/usr/local/man/man1 \ - -Dsiteman3dir="${EPREFIX}"/usr/local/man/man3 \ - -Dvendorman1dir="${EPREFIX}"/usr/share/man/man1 \ - -Dvendorman3dir="${EPREFIX}"/usr/share/man/man3 \ - -Dman1ext='1' \ - -Dman3ext='3pm' \ - -Dlibperl="${LIBPERL}" \ - -Dlocincpth="${EPREFIX}"'/usr/include ' \ - -Dglibpth="${EPREFIX}/$(get_libdir) ${EPREFIX}/usr/$(get_libdir)"' ' \ - -Duselargefiles \ - -Dd_semctl_semun \ - -Dcf_by='Gentoo' \ - -Dmyhostname='localhost' \ - -Dperladmin='root@localhost' \ - -Dinstallusrbinperl='n' \ - -Ud_csh \ - -Dsh="${EPREFIX}"/bin/sh \ - -Dtargetsh="${EPREFIX}"/bin/sh \ - -Uusenm \ - "${myconf[@]}" || die "Unable to configure" -} diff --git a/dev-lang/perl/files/eblits/src_install-v50160001.eblit b/dev-lang/perl/files/eblits/src_install-v50160001.eblit deleted file mode 100644 index aa90fae..0000000 --- a/dev-lang/perl/files/eblits/src_install-v50160001.eblit +++ /dev/null @@ -1,61 +0,0 @@ -# Copyright 1999-2013 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Id$ - -eblit-perl-src_install() { - local i - local coredir="${ARCH_LIB}/CORE" - - emake DESTDIR="${D}" install - - rm -f "${ED}"/usr/bin/perl - ln -s perl${MY_PV} "${ED}"/usr/bin/perl || die - - if ! tc-is-static-only ; then - dolib.so "${ED}"${coredir}/${LIBPERL} - rm -f "${ED}"${coredir}/${LIBPERL} - ln -sf ${LIBPERL} "${ED}"/usr/$(get_libdir)/libperl$(get_libname ${SHORT_PV}) || die - ln -sf ${LIBPERL} "${ED}"/usr/$(get_libdir)/libperl$(get_libname) || die - ln -sf ../../../../../$(get_libdir)/${LIBPERL} "${ED}"${coredir}/${LIBPERL} || die - ln -sf ../../../../../$(get_libdir)/${LIBPERL} "${ED}"${coredir}/libperl$(get_libname ${SHORT_PV}) || die - ln -sf ../../../../../$(get_libdir)/${LIBPERL} "${ED}"${coredir}/libperl$(get_libname) || die - fi - - rm -rf "${ED}"/usr/share/man/man3 || die "Unable to remove module man pages" - -# # A poor fix for the miniperl issues -# dosed 's:./miniperl:/usr/bin/perl:' /usr/$(get_libdir)/perl5/${MY_PV}/ExtUtils/xsubpp -# fperms 0444 /usr/$(get_libdir)/perl5/${MY_PV}/ExtUtils/xsubpp -# dosed 's:./miniperl:/usr/bin/perl:' /usr/bin/xsubpp -# fperms 0755 /usr/bin/xsubpp - - # This removes ${D} from Config.pm - for i in $(find "${D}" -iname "Config.pm" ) ; do - einfo "Removing ${D} from ${i}..." - sed -i -e "s:${D}::" "${i}" || die "Sed failed" - done - - find "${ED}" -type f -name .packlist -delete || die - - # Note: find out from psm why we would need/want this. - # ( use berkdb && has_version '=sys-libs/db-1*' ) || - # find "${ED}" -name "*NDBM*" | xargs rm -f - - dodoc Changes* README AUTHORS - - if use doc ; then - # HTML Documentation - # We expect errors, warnings, and such with the following. - - dodir /usr/share/doc/${PF}/html - LD_LIBRARY_PATH=. ./perl installhtml \ - --podroot='.' \ - --podpath='lib:ext:pod:vms' \ - --recurse \ - --htmldir="${ED}/usr/share/doc/${PF}/html" - fi - - [[ -d ${ED}/usr/local ]] && rm -r "${ED}"/usr/local - - dual_scripts -} diff --git a/dev-lang/perl/files/eblits/src_install-v50200001.eblit b/dev-lang/perl/files/eblits/src_install-v50200001.eblit deleted file mode 100644 index fafff82..0000000 --- a/dev-lang/perl/files/eblits/src_install-v50200001.eblit +++ /dev/null @@ -1,51 +0,0 @@ -# Copyright 1999-2014 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Id$ - -eblit-perl-src_install() { - local i - local coredir="${ARCH_LIB}/CORE" - - emake DESTDIR="${D}" install - - rm -f "${ED}/usr/bin/perl${MY_PV}" - ln -s perl "${ED}"/usr/bin/perl${MY_PV} || die - - if ! tc-is-static-only ; then - dolib.so "${ED}"${coredir}/${LIBPERL} - rm -f "${ED}"${coredir}/${LIBPERL} - ln -sf ${LIBPERL} "${ED}"/usr/$(get_libdir)/libperl$(get_libname ${SHORT_PV}) || die - ln -sf ${LIBPERL} "${ED}"/usr/$(get_libdir)/libperl$(get_libname) || die - ln -sf ../../../../../$(get_libdir)/${LIBPERL} "${ED}"${coredir}/${LIBPERL} || die - ln -sf ../../../../../$(get_libdir)/${LIBPERL} "${ED}"${coredir}/libperl$(get_libname ${SHORT_PV}) || die - ln -sf ../../../../../$(get_libdir)/${LIBPERL} "${ED}"${coredir}/libperl$(get_libname) || die - fi - - rm -rf "${ED}"/usr/share/man/man3 || die "Unable to remove module man pages" - - # This removes ${D} from Config.pm - for i in $(find "${D}" -iname "Config.pm" ) ; do - einfo "Removing ${D} from ${i}..." - sed -i -e "s:${D}::" "${i}" || die "Sed failed" - done - - find "${ED}" -type f -name .packlist -delete || die - - dodoc Changes* README AUTHORS - - if use doc ; then - # HTML Documentation - # We expect errors, warnings, and such with the following. - - dodir /usr/share/doc/${PF}/html - LD_LIBRARY_PATH=. ./perl installhtml \ - --podroot='.' \ - --podpath='lib:ext:pod:vms' \ - --recurse \ - --htmldir="${ED}/usr/share/doc/${PF}/html" - fi - - [[ -d ${ED}/usr/local ]] && rm -r "${ED}"/usr/local - - dual_scripts -} diff --git a/dev-lang/perl/files/eblits/src_install-v50240001.eblit b/dev-lang/perl/files/eblits/src_install-v50240001.eblit deleted file mode 100644 index fafff82..0000000 --- a/dev-lang/perl/files/eblits/src_install-v50240001.eblit +++ /dev/null @@ -1,51 +0,0 @@ -# Copyright 1999-2014 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Id$ - -eblit-perl-src_install() { - local i - local coredir="${ARCH_LIB}/CORE" - - emake DESTDIR="${D}" install - - rm -f "${ED}/usr/bin/perl${MY_PV}" - ln -s perl "${ED}"/usr/bin/perl${MY_PV} || die - - if ! tc-is-static-only ; then - dolib.so "${ED}"${coredir}/${LIBPERL} - rm -f "${ED}"${coredir}/${LIBPERL} - ln -sf ${LIBPERL} "${ED}"/usr/$(get_libdir)/libperl$(get_libname ${SHORT_PV}) || die - ln -sf ${LIBPERL} "${ED}"/usr/$(get_libdir)/libperl$(get_libname) || die - ln -sf ../../../../../$(get_libdir)/${LIBPERL} "${ED}"${coredir}/${LIBPERL} || die - ln -sf ../../../../../$(get_libdir)/${LIBPERL} "${ED}"${coredir}/libperl$(get_libname ${SHORT_PV}) || die - ln -sf ../../../../../$(get_libdir)/${LIBPERL} "${ED}"${coredir}/libperl$(get_libname) || die - fi - - rm -rf "${ED}"/usr/share/man/man3 || die "Unable to remove module man pages" - - # This removes ${D} from Config.pm - for i in $(find "${D}" -iname "Config.pm" ) ; do - einfo "Removing ${D} from ${i}..." - sed -i -e "s:${D}::" "${i}" || die "Sed failed" - done - - find "${ED}" -type f -name .packlist -delete || die - - dodoc Changes* README AUTHORS - - if use doc ; then - # HTML Documentation - # We expect errors, warnings, and such with the following. - - dodir /usr/share/doc/${PF}/html - LD_LIBRARY_PATH=. ./perl installhtml \ - --podroot='.' \ - --podpath='lib:ext:pod:vms' \ - --recurse \ - --htmldir="${ED}/usr/share/doc/${PF}/html" - fi - - [[ -d ${ED}/usr/local ]] && rm -r "${ED}"/usr/local - - dual_scripts -} diff --git a/dev-lang/perl/files/eblits/src_prepare-v50160001.eblit b/dev-lang/perl/files/eblits/src_prepare-v50160001.eblit deleted file mode 100644 index a12b773..0000000 --- a/dev-lang/perl/files/eblits/src_prepare-v50160001.eblit +++ /dev/null @@ -1,70 +0,0 @@ -# Copyright 1999-2012 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Id$ - -src_prepare_update_patchlevel_h() { - # Copied and modified from debian: - # Copyright 2011 Niko Tyni - # This program is free software; you can redistribute it and/or modify - # it under the same terms as Perl itself. - local patchdir="${WORKDIR}/patches" - local prefix - - [[ -f ${patchdir}/series ]] || return 0 - -while read patch -do - patchname=$(echo $patch | sed 's/\.diff$//') - < $patchdir/$patch sed -e '/^Subject:/ { N; s/\n / / }' | sed -n -e ' - - # massage the patch headers - s|^Bug: .*https\?://rt\.perl\.org/.*id=\(.*\).*|[perl #\1]|; tprepend; - s|^Bug: .*https\?://rt\.cpan\.org/.*id=\(.*\).*|[rt.cpan.org #\1]|; tprepend; - s|^Bug-Gentoo: ||; tprepend; - s/^\(Subject\|Description\): //; tappend; - s|^Origin: .*http://perl5\.git\.perl\.org/perl\.git/commit\(diff\)\?/\(.......\).*|[\2]|; tprepend; - - # post-process at the end of input - $ { x; - # include the version number in the patchlevel.h description (if available) - s/List packaged patches/&'" for ${PF}(#${PATCH_VER})"'/; - - # escape any backslashes and double quotes - s|\\|\\\\|g; s|"|\\"|g; - - # add a prefix - s|^|\t,"'"$prefix$patchname"' - |; - # newlines away - s/\n/ /g; s/ */ /g; - # add a suffix - s/ *$/"/; p - }; - # stop all processing - d; - # label: append to the hold space - :append H; d; - # label: prepend to the hold space - :prepend x; H; d; - ' -done < "${WORKDIR}"/patches/series > "${S}"/patchlevel-gentoo.h -} - -eblit-perl-src_prepare() { - local patch - EPATCH_OPTS+=" -p1" - einfo "Applying patches from ${MY_P}-${PATCH_VER} ..." - while read patch ; do - EPATCH_SINGLE_MSG=" ${patch} ..." - epatch "${WORKDIR}"/patches/${patch} - done < "${WORKDIR}"/patches/series - - src_prepare_update_patchlevel_h - - # pod/perltoc.pod fails - # lib/ExtUtils/t/Embed.t fails - if ! tc-is-static-only ; then - ln -s ${LIBPERL} libperl$(get_libname ${SHORT_PV}) || die - ln -s ${LIBPERL} libperl$(get_libname ) || die - fi -} - diff --git a/dev-lang/perl/files/eblits/src_prepare-v50240001.eblit b/dev-lang/perl/files/eblits/src_prepare-v50240001.eblit deleted file mode 100644 index 5387d4b..0000000 --- a/dev-lang/perl/files/eblits/src_prepare-v50240001.eblit +++ /dev/null @@ -1,72 +0,0 @@ -# Copyright 1999-2012 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Id$ - -src_prepare_update_patchlevel_h() { - # Copied and modified from debian: - # Copyright 2011 Niko Tyni - # This program is free software; you can redistribute it and/or modify - # it under the same terms as Perl itself. - local patchdir="${WORKDIR}/patches" - local prefix - - [[ -f ${patchdir}/series ]] || return 0 - -while read patch -do - patchname=$(echo $patch | sed 's/\.diff$//') - < $patchdir/$patch sed -e '/^Subject:/ { N; s/\n / / }' | sed -n -e ' - - # massage the patch headers - s|^Bug: .*https\?://rt\.perl\.org/.*id=\(.*\).*|[perl #\1]|; tprepend; - s|^Bug: .*https\?://rt\.cpan\.org/.*id=\(.*\).*|[rt.cpan.org #\1]|; tprepend; - s|^Bug-Gentoo: ||; tprepend; - s/^\(Subject\|Description\): //; tappend; - s|^Origin: .*http://perl5\.git\.perl\.org/perl\.git/commit\(diff\)\?/\(.......\).*|[\2]|; tprepend; - - # post-process at the end of input - $ { x; - # include the version number in the patchlevel.h description (if available) - s/List packaged patches/&'" for ${PF}(#${PATCH_VER})"'/; - - # escape any backslashes and double quotes - s|\\|\\\\|g; s|"|\\"|g; - - # add a prefix - s|^|\t,"'"$prefix$patchname"' - |; - # newlines away - s/\n/ /g; s/ */ /g; - # add a suffix - s/ *$/"/; p - }; - # stop all processing - d; - # label: append to the hold space - :append H; d; - # label: prepend to the hold space - :prepend x; H; d; - ' -done < "${WORKDIR}"/patches/series > "${S}"/patchlevel-gentoo.h -} - -eblit-perl-src_prepare() { - local patch - EPATCH_OPTS+=" -p1" - einfo "Applying patches from ${MY_P}-${PATCH_VER} ..." - while read patch ; do - EPATCH_SINGLE_MSG=" ${patch} ..." - epatch "${WORKDIR}"/patches/${patch} - done < "${WORKDIR}"/patches/series - - src_prepare_update_patchlevel_h - - # pod/perltoc.pod fails - # lib/ExtUtils/t/Embed.t fails - if ! tc-is-static-only ; then - ln -s ${LIBPERL} libperl$(get_libname ${SHORT_PV}) || die - ln -s ${LIBPERL} libperl$(get_libname ) || die - fi - - default -} - diff --git a/dev-lang/perl/files/eblits/src_test-v50160001.eblit b/dev-lang/perl/files/eblits/src_test-v50160001.eblit deleted file mode 100644 index 9e241ec..0000000 --- a/dev-lang/perl/files/eblits/src_test-v50160001.eblit +++ /dev/null @@ -1,12 +0,0 @@ -# Copyright 1999-2012 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Id$ - -eblit-perl-src_test() { - if [[ ${EUID} == 0 ]] ; then - ewarn "Test fails with a sandbox error (#328793) if run as root. Skipping tests..." - return 0 - fi - use elibc_uclibc && export MAKEOPTS+=" -j1" - TEST_JOBS="$(makeopts_jobs)" make test_harness || die "test failed" -} diff --git a/dev-lang/perl/files/perl-5.22.0-cwd-prefix.patch b/dev-lang/perl/files/perl-5.22.0-cwd-prefix.patch deleted file mode 100644 index afa016f..0000000 --- a/dev-lang/perl/files/perl-5.22.0-cwd-prefix.patch +++ /dev/null @@ -1,19 +0,0 @@ -On RAP, pwd from the host system will refer to the dynamic linker there, -causing symbol error from incompatibility of glibc. Always call pwd within -RAP. - - Benda Xu <heroxbd@gentoo.org> Tue May 12 11:00:17 JST 2015 - ---- perl-5.22.0/dist/PathTools/Cwd.pm -+++ perl-5.22.0/dist/PathTools/Cwd.pm -@@ -168,8 +168,8 @@ $METHOD_MAP{NT} = $METHOD_MAP{MSWin32}; - # so everything works under taint mode. - my $pwd_cmd; - if($^O ne 'MSWin32') { -- foreach my $try ('/bin/pwd', -- '/usr/bin/pwd', -+ foreach my $try ('@GENTOO_PORTAGE_EPREFIX@/bin/pwd', -+ '@GENTOO_PORTAGE_EPREFIX@/usr/bin/pwd', - '/QOpenSys/bin/pwd', # OS/400 PASE. - ) { - if( -x $try ) { diff --git a/dev-lang/perl/files/perl-cwd-prefix.patch b/dev-lang/perl/files/perl-cwd-prefix.patch deleted file mode 100644 index 5edc924..0000000 --- a/dev-lang/perl/files/perl-cwd-prefix.patch +++ /dev/null @@ -1,19 +0,0 @@ -On RAP, pwd from the host system will refer to the dynamic linker there, -causing symbol error from incompatibility of glibc. Always call pwd within -RAP. - - Benda Xu <heroxbd@gentoo.org> Tue May 12 11:00:17 JST 2015 - ---- perl-5.16.3/dist/PathTools/Cwd.pm -+++ perl-5.16.3/dist/PathTools/Cwd.pm -@@ -331,8 +331,8 @@ $METHOD_MAP{NT} = $METHOD_MAP{MSWin32}; - # are safe. This prevents _backtick_pwd() consulting $ENV{PATH} - # so everything works under taint mode. - my $pwd_cmd; --foreach my $try ('/bin/pwd', -- '/usr/bin/pwd', -+foreach my $try ('@GENTOO_PORTAGE_EPREFIX@/bin/pwd', -+ '@GENTOO_PORTAGE_EPREFIX@/usr/bin/pwd', - '/QOpenSys/bin/pwd', # OS/400 PASE. - ) { - |