diff options
Diffstat (limited to 'net-misc/dahdi-tools/files/dahdi-autoconf.conf2')
| -rw-r--r-- | net-misc/dahdi-tools/files/dahdi-autoconf.conf2 | 40 |
1 files changed, 40 insertions, 0 deletions
diff --git a/net-misc/dahdi-tools/files/dahdi-autoconf.conf2 b/net-misc/dahdi-tools/files/dahdi-autoconf.conf2 new file mode 100644 index 000000000000..a46545231911 --- /dev/null +++ b/net-misc/dahdi-tools/files/dahdi-autoconf.conf2 @@ -0,0 +1,40 @@ +# Global settings +# Set this to your country code. +DAHDI_ZONE=za +DAHDI_ECHOCAN=oslec # mg2,jpah,kb1,sec,sec2 (there may be more, we recommend oslec) + +# Settings for analog +#Analog signal types, one of: +# ks - KewlStart (recommended, default) +# ls - LoopStart +# gs - GroundStart + +# Signalling to be used on FXO ports +DAHDI_FXO_SIGNALLING=ks + +# Signalling to be used on FXS ports +DAHDI_FXS_SIGNALLING=ks + +# Whether or not to echocan: +DAHDI_FXO_ECHOCAN=yes +DAHDI_FXS_ECHOCAN=yes + +# These settings will be used for BRI cards. +# Known options: B8ZS,AMI,HDB3 +DAHDI_BRI_CODING=AMI + +# Known options: ESF,D4,CCS,CRC4 +DAHDI_BRI_FRAMING=CCS + +# Our experience is that it's not required (still defaults to yes) +DAHDI_BRI_NT_ECHOCAN=yes +DAHDI_BRI_TE_ECHOCAN=yes + +# These settings are for PRI cards. Note that only E1 currently supported. +DAHDI_E1_CPE_ECHOCAN=yes +DAHDI_E1_NET_ECHOCAN=yes + +# PRI will default to CPE mode (remote end provides signalling). +# If you really want to provide signalling set the appropriate spans +# here (eg, set span 1 to NET mode). +#PRI_SPAN_1_NET=yes |