diff options
Diffstat (limited to 'net-fs/samba/files')
| -rw-r--r-- | net-fs/samba/files/3.0.25c-lazyldflags.patch | 36 | ||||
| -rw-r--r-- | net-fs/samba/files/3.0.25c-py_smp.patch | 30 | ||||
| -rw-r--r-- | net-fs/samba/files/3.0.x-libdirsymlink.patch | 13 | ||||
| -rw-r--r-- | net-fs/samba/files/config/lmhosts | 2 | ||||
| -rw-r--r-- | net-fs/samba/files/config/nsswitch.conf-winbind | 17 | ||||
| -rw-r--r-- | net-fs/samba/files/config/nsswitch.conf-wins | 17 | ||||
| -rw-r--r-- | net-fs/samba/files/config/samba.pam | 8 | ||||
| -rw-r--r-- | net-fs/samba/files/config/samba.schema | 471 | ||||
| -rw-r--r-- | net-fs/samba/files/config/smb.conf.example-samba3 | 478 | ||||
| -rw-r--r-- | net-fs/samba/files/config/smbusers | 4 | ||||
| -rw-r--r-- | net-fs/samba/files/config/swat.xinetd | 17 | ||||
| -rw-r--r-- | net-fs/samba/files/config/system-auth-winbind | 18 | ||||
| -rw-r--r-- | net-fs/samba/files/digest-samba-3.0.25c | 3 | ||||
| -rw-r--r-- | net-fs/samba/files/samba-init | 7 | ||||
| -rw-r--r-- | net-fs/samba/files/samba-xinetd | 12 |
15 files changed, 1132 insertions, 1 deletions
diff --git a/net-fs/samba/files/3.0.25c-lazyldflags.patch b/net-fs/samba/files/3.0.25c-lazyldflags.patch new file mode 100644 index 000000000000..845624738b80 --- /dev/null +++ b/net-fs/samba/files/3.0.25c-lazyldflags.patch @@ -0,0 +1,36 @@ +diff -Naur samba-3.0.25c.orig/source/Makefile.in samba-3.0.25c/source/Makefile.in +--- samba-3.0.25c.orig/source/Makefile.in 2007-09-01 09:14:54.000000000 +0200 ++++ samba-3.0.25c/source/Makefile.in 2007-09-01 09:17:08.000000000 +0200 +@@ -87,6 +87,8 @@ + # The permissions to give the executables + INSTALLPERMS = 0755 + ++LAZYLDFLAGS=-Wl,-z,now ++ + # set these to where to find various files + # These can be overridden by command line switches (see smbd(8)) + # or in smb.conf (see smb.conf(5)) +@@ -1008,19 +1010,19 @@ + + bin/smbmnt@EXEEXT@: proto_exists $(MNT_OBJ) bin/.dummy + @echo Linking $@ +- @$(CC) $(FLAGS) -o $@ $(MNT_OBJ) $(DYNEXP) $(LDFLAGS) ++ @$(CC) $(FLAGS) -o $@ $(MNT_OBJ) $(DYNEXP) $(LDFLAGS) $(LAZYLDFLAGS) + + bin/smbumount@EXEEXT@: proto_exists $(UMOUNT_OBJ) bin/.dummy + @echo Linking $@ +- @$(CC) $(FLAGS) -o $@ $(UMOUNT_OBJ) $(DYNEXP) $(LDFLAGS) ++ @$(CC) $(FLAGS) -o $@ $(UMOUNT_OBJ) $(DYNEXP) $(LDFLAGS) $(LAZYLDFLAGS) + + bin/mount.cifs@EXEEXT@: $(CIFS_MOUNT_OBJ) bin/.dummy + @echo Linking $@ +- @$(CC) $(FLAGS) -o $@ $(CIFS_MOUNT_OBJ) $(DYNEXP) $(LDFLAGS) ++ @$(CC) $(FLAGS) -o $@ $(CIFS_MOUNT_OBJ) $(DYNEXP) $(LDFLAGS) $(LAZYLDFLAGS) + + bin/umount.cifs@EXEEXT@: $(CIFS_UMOUNT_OBJ) bin/.dummy + @echo Linking $@ +- @$(CC) $(FLAGS) -o $@ $(CIFS_UMOUNT_OBJ) $(DYNEXP) $(LDFLAGS) ++ @$(CC) $(FLAGS) -o $@ $(CIFS_UMOUNT_OBJ) $(DYNEXP) $(LDFLAGS) $(LAZYLDFLAGS) + + bin/testparm@EXEEXT@: proto_exists $(TESTPARM_OBJ) @BUILD_POPT@ bin/.dummy + @echo Linking $@ diff --git a/net-fs/samba/files/3.0.25c-py_smp.patch b/net-fs/samba/files/3.0.25c-py_smp.patch new file mode 100644 index 000000000000..254389d75271 --- /dev/null +++ b/net-fs/samba/files/3.0.25c-py_smp.patch @@ -0,0 +1,30 @@ +diff -ruN samba-3.0.25c.orig/source/python/py_smb.c samba-3.0.25c/source/python/py_smb.c +--- samba-3.0.25c.orig/source/python/py_smb.c 2007-03-01 05:53:57.000000000 +0100 ++++ samba-3.0.25c/source/python/py_smb.c 2007-08-26 13:32:11.000000000 +0200 +@@ -39,6 +39,7 @@ + struct cli_state *cli; + char *server; + struct in_addr ip; ++ NTSTATUS status; + + if (!PyArg_ParseTupleAndKeywords(args, kw, "s", kwlist, &server)) + return NULL; +@@ -48,7 +49,8 @@ + + ZERO_STRUCT(ip); + +- if (!cli_connect(cli, server, &ip)) ++ status = cli_connect(cli, server, &ip); ++ if (!NT_STATUS_IS_OK(status)) + return NULL; + + return new_cli_state_object(cli); +@@ -59,7 +61,7 @@ + { + cli_state_object *cli = (cli_state_object *)self; + static char *kwlist[] = { "called", "calling", NULL }; +- char *calling_name = NULL, *called_name; ++ const char *calling_name = NULL, *called_name; + struct nmb_name calling, called; + BOOL result; + diff --git a/net-fs/samba/files/3.0.x-libdirsymlink.patch b/net-fs/samba/files/3.0.x-libdirsymlink.patch new file mode 100644 index 000000000000..5266688b861b --- /dev/null +++ b/net-fs/samba/files/3.0.x-libdirsymlink.patch @@ -0,0 +1,13 @@ +--- source/configure.in.old 2005-08-19 19:16:29.000000000 +0200 ++++ source/configure.in 2005-08-31 16:19:41.000000000 +0200 +@@ -1911,8 +1911,8 @@ + dnl library directory is there and check the ABI directory first (which + dnl should be harmless on other systems. + dnl For IA64 HPUX systems, the libs are located in lib/hpux32 instead of lib. +- for l in "lib32" "lib" "lib/hpux32"; do +- if test -d "$i/$l" ; then ++ for l in "lib" "lib/hpux32"; do ++ if test -d "$i/$l" -o -L "$i/$l"; then + LDFLAGS="$save_LDFLAGS -L$i/$l" + LIBS= + export LDFLAGS LIBS CPPFLAGS diff --git a/net-fs/samba/files/config/lmhosts b/net-fs/samba/files/config/lmhosts new file mode 100644 index 000000000000..504ad2661757 --- /dev/null +++ b/net-fs/samba/files/config/lmhosts @@ -0,0 +1,2 @@ +# $Header: /var/cvsroot/gentoo-x86/net-fs/samba/files/config/lmhosts,v 1.1 2007/09/07 21:07:40 dev-zero Exp $ +127.0.0.1 localhost diff --git a/net-fs/samba/files/config/nsswitch.conf-winbind b/net-fs/samba/files/config/nsswitch.conf-winbind new file mode 100644 index 000000000000..e66273a62b44 --- /dev/null +++ b/net-fs/samba/files/config/nsswitch.conf-winbind @@ -0,0 +1,17 @@ +# $Header: /var/cvsroot/gentoo-x86/net-fs/samba/files/config/nsswitch.conf-winbind,v 1.1 2007/09/07 21:07:40 dev-zero Exp $ +passwd: files winbind +group: files winbind + +hosts: files dns +networks: files dns + +services: db files +protocols: db files +rpc: db files +ethers: db files +netmasks: files +netgroup: files +bootparams: files + +automount: files +aliases: files diff --git a/net-fs/samba/files/config/nsswitch.conf-wins b/net-fs/samba/files/config/nsswitch.conf-wins new file mode 100644 index 000000000000..b21fef3ef39f --- /dev/null +++ b/net-fs/samba/files/config/nsswitch.conf-wins @@ -0,0 +1,17 @@ +# $Header: /var/cvsroot/gentoo-x86/net-fs/samba/files/config/nsswitch.conf-wins,v 1.1 2007/09/07 21:07:40 dev-zero Exp $ +passwd: files +group: files + +hosts: files dns wins +networks: files dns + +services: db files +protocols: db files +rpc: db files +ethers: db files +netmasks: files +netgroup: files +bootparams: files + +automount: files +aliases: files diff --git a/net-fs/samba/files/config/samba.pam b/net-fs/samba/files/config/samba.pam new file mode 100644 index 000000000000..91beadd478a4 --- /dev/null +++ b/net-fs/samba/files/config/samba.pam @@ -0,0 +1,8 @@ +#%PAM-1.0 +# * pam_smbpass.so authenticates against the smbpasswd file +# * changed Redhat's 'pam_stack' with 'include' for *BSD compatibility +# (Diego "Flameeyes" Petteno'): enable with pam>=0.78 only +auth required pam_smbpass.so nodelay +account include system-auth +session include system-auth +password required pam_smbpass.so nodelay smbconf=/etc/samba/smb.conf diff --git a/net-fs/samba/files/config/samba.schema b/net-fs/samba/files/config/samba.schema new file mode 100644 index 000000000000..17ea2d9fd2f6 --- /dev/null +++ b/net-fs/samba/files/config/samba.schema @@ -0,0 +1,471 @@ +## +## schema file for OpenLDAP 2.x +## Schema for storing Samba user accounts and group maps in LDAP +## OIDs are owned by the Samba Team +## +## Prerequisite schemas - uid (cosine.schema) +## - displayName (inetorgperson.schema) +## - gidNumber (nis.schema) +## +## 1.3.6.1.4.1.7165.2.1.x - attributetypes +## 1.3.6.1.4.1.7165.2.2.x - objectclasses +## +## ----- READ THIS WHEN ADDING A NEW ATTRIBUTE OR OBJECT CLASS ------ +## +## Run the 'get_next_oid' bash script in this directory to find the +## next available OID for attribute type and object classes. +## +## $ ./get_next_oid +## attributetype ( 1.3.6.1.4.1.7165.2.1.XX NAME .... +## objectclass ( 1.3.6.1.4.1.7165.2.2.XX NAME .... +## +## Also ensure that new entries adhere to the declaration style +## used throughout this file +## +## <attributetype|objectclass> ( 1.3.6.1.4.1.7165.2.XX.XX NAME .... +## ^ ^ ^ +## +## The spaces are required for the get_next_oid script (and for +## readability). +## +## ------------------------------------------------------------------ + +######################################################################## +## HISTORICAL ## +######################################################################## + +## +## Password hashes +## +#attributetype ( 1.3.6.1.4.1.7165.2.1.1 NAME 'lmPassword' +# DESC 'LanManager Passwd' +# EQUALITY caseIgnoreIA5Match +# SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{32} SINGLE-VALUE ) + +#attributetype ( 1.3.6.1.4.1.7165.2.1.2 NAME 'ntPassword' +# DESC 'NT Passwd' +# EQUALITY caseIgnoreIA5Match +# SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{32} SINGLE-VALUE ) + +## +## Account flags in string format ([UWDX ]) +## +#attributetype ( 1.3.6.1.4.1.7165.2.1.4 NAME 'acctFlags' +# DESC 'Account Flags' +# EQUALITY caseIgnoreIA5Match +# SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{16} SINGLE-VALUE ) + +## +## Password timestamps & policies +## +#attributetype ( 1.3.6.1.4.1.7165.2.1.3 NAME 'pwdLastSet' +# DESC 'NT pwdLastSet' +# EQUALITY integerMatch +# SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) + +#attributetype ( 1.3.6.1.4.1.7165.2.1.5 NAME 'logonTime' +# DESC 'NT logonTime' +# EQUALITY integerMatch +# SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) + +#attributetype ( 1.3.6.1.4.1.7165.2.1.6 NAME 'logoffTime' +# DESC 'NT logoffTime' +# EQUALITY integerMatch +# SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) + +#attributetype ( 1.3.6.1.4.1.7165.2.1.7 NAME 'kickoffTime' +# DESC 'NT kickoffTime' +# EQUALITY integerMatch +# SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) + +#attributetype ( 1.3.6.1.4.1.7165.2.1.8 NAME 'pwdCanChange' +# DESC 'NT pwdCanChange' +# EQUALITY integerMatch +# SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) + +#attributetype ( 1.3.6.1.4.1.7165.2.1.9 NAME 'pwdMustChange' +# DESC 'NT pwdMustChange' +# EQUALITY integerMatch +# SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) + +## +## string settings +## +#attributetype ( 1.3.6.1.4.1.7165.2.1.10 NAME 'homeDrive' +# DESC 'NT homeDrive' +# EQUALITY caseIgnoreIA5Match +# SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{4} SINGLE-VALUE ) + +#attributetype ( 1.3.6.1.4.1.7165.2.1.11 NAME 'scriptPath' +# DESC 'NT scriptPath' +# EQUALITY caseIgnoreIA5Match +# SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{255} SINGLE-VALUE ) + +#attributetype ( 1.3.6.1.4.1.7165.2.1.12 NAME 'profilePath' +# DESC 'NT profilePath' +# EQUALITY caseIgnoreIA5Match +# SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{255} SINGLE-VALUE ) + +#attributetype ( 1.3.6.1.4.1.7165.2.1.13 NAME 'userWorkstations' +# DESC 'userWorkstations' +# EQUALITY caseIgnoreIA5Match +# SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{255} SINGLE-VALUE ) + +#attributetype ( 1.3.6.1.4.1.7165.2.1.17 NAME 'smbHome' +# DESC 'smbHome' +# EQUALITY caseIgnoreIA5Match +# SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{128} ) + +#attributetype ( 1.3.6.1.4.1.7165.2.1.18 NAME 'domain' +# DESC 'Windows NT domain to which the user belongs' +# EQUALITY caseIgnoreIA5Match +# SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{128} ) + +## +## user and group RID +## +#attributetype ( 1.3.6.1.4.1.7165.2.1.14 NAME 'rid' +# DESC 'NT rid' +# EQUALITY integerMatch +# SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) + +#attributetype ( 1.3.6.1.4.1.7165.2.1.15 NAME 'primaryGroupID' +# DESC 'NT Group RID' +# EQUALITY integerMatch +# SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) + +## +## The smbPasswordEntry objectclass has been depreciated in favor of the +## sambaAccount objectclass +## +#objectclass ( 1.3.6.1.4.1.7165.2.2.1 NAME 'smbPasswordEntry' SUP top AUXILIARY +# DESC 'Samba smbpasswd entry' +# MUST ( uid $ uidNumber ) +# MAY ( lmPassword $ ntPassword $ pwdLastSet $ acctFlags )) + +#objectclass ( 1.3.6.1.4.1.7165.2.2.2 NAME 'sambaAccount' SUP top STRUCTURAL +# DESC 'Samba Account' +# MUST ( uid $ rid ) +# MAY ( cn $ lmPassword $ ntPassword $ pwdLastSet $ logonTime $ +# logoffTime $ kickoffTime $ pwdCanChange $ pwdMustChange $ acctFlags $ +# displayName $ smbHome $ homeDrive $ scriptPath $ profilePath $ +# description $ userWorkstations $ primaryGroupID $ domain )) + +#objectclass ( 1.3.6.1.4.1.7165.2.2.3 NAME 'sambaAccount' SUP top AUXILIARY +# DESC 'Samba Auxiliary Account' +# MUST ( uid $ rid ) +# MAY ( cn $ lmPassword $ ntPassword $ pwdLastSet $ logonTime $ +# logoffTime $ kickoffTime $ pwdCanChange $ pwdMustChange $ acctFlags $ +# displayName $ smbHome $ homeDrive $ scriptPath $ profilePath $ +# description $ userWorkstations $ primaryGroupID $ domain )) + +######################################################################## +## END OF HISTORICAL ## +######################################################################## + +####################################################################### +## Attributes used by Samba 3.0 schema ## +####################################################################### + +## +## Password hashes +## +attributetype ( 1.3.6.1.4.1.7165.2.1.24 NAME 'sambaLMPassword' + DESC 'LanManager Password' + EQUALITY caseIgnoreIA5Match + SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{32} SINGLE-VALUE ) + +attributetype ( 1.3.6.1.4.1.7165.2.1.25 NAME 'sambaNTPassword' + DESC 'MD4 hash of the unicode password' + EQUALITY caseIgnoreIA5Match + SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{32} SINGLE-VALUE ) + +## +## Account flags in string format ([UWDX ]) +## +attributetype ( 1.3.6.1.4.1.7165.2.1.26 NAME 'sambaAcctFlags' + DESC 'Account Flags' + EQUALITY caseIgnoreIA5Match + SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{16} SINGLE-VALUE ) + +## +## Password timestamps & policies +## +attributetype ( 1.3.6.1.4.1.7165.2.1.27 NAME 'sambaPwdLastSet' + DESC 'Timestamp of the last password update' + EQUALITY integerMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) + +attributetype ( 1.3.6.1.4.1.7165.2.1.28 NAME 'sambaPwdCanChange' + DESC 'Timestamp of when the user is allowed to update the password' + EQUALITY integerMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) + +attributetype ( 1.3.6.1.4.1.7165.2.1.29 NAME 'sambaPwdMustChange' + DESC 'Timestamp of when the password will expire' + EQUALITY integerMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) + +attributetype ( 1.3.6.1.4.1.7165.2.1.30 NAME 'sambaLogonTime' + DESC 'Timestamp of last logon' + EQUALITY integerMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) + +attributetype ( 1.3.6.1.4.1.7165.2.1.31 NAME 'sambaLogoffTime' + DESC 'Timestamp of last logoff' + EQUALITY integerMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) + +attributetype ( 1.3.6.1.4.1.7165.2.1.32 NAME 'sambaKickoffTime' + DESC 'Timestamp of when the user will be logged off automatically' + EQUALITY integerMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) + +attributetype ( 1.3.6.1.4.1.7165.2.1.48 NAME 'sambaBadPasswordCount' + DESC 'Bad password attempt count' + EQUALITY integerMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) + +attributetype ( 1.3.6.1.4.1.7165.2.1.49 NAME 'sambaBadPasswordTime' + DESC 'Time of the last bad password attempt' + EQUALITY integerMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) + +attributetype ( 1.3.6.1.4.1.7165.2.1.55 NAME 'sambaLogonHours' + DESC 'Logon Hours' + EQUALITY caseIgnoreIA5Match + SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{42} SINGLE-VALUE ) + +## +## string settings +## +attributetype ( 1.3.6.1.4.1.7165.2.1.33 NAME 'sambaHomeDrive' + DESC 'Driver letter of home directory mapping' + EQUALITY caseIgnoreIA5Match + SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{4} SINGLE-VALUE ) + +attributetype ( 1.3.6.1.4.1.7165.2.1.34 NAME 'sambaLogonScript' + DESC 'Logon script path' + EQUALITY caseIgnoreMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{255} SINGLE-VALUE ) + +attributetype ( 1.3.6.1.4.1.7165.2.1.35 NAME 'sambaProfilePath' + DESC 'Roaming profile path' + EQUALITY caseIgnoreMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{255} SINGLE-VALUE ) + +attributetype ( 1.3.6.1.4.1.7165.2.1.36 NAME 'sambaUserWorkstations' + DESC 'List of user workstations the user is allowed to logon to' + EQUALITY caseIgnoreMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{255} SINGLE-VALUE ) + +attributetype ( 1.3.6.1.4.1.7165.2.1.37 NAME 'sambaHomePath' + DESC 'Home directory UNC path' + EQUALITY caseIgnoreMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{128} ) + +attributetype ( 1.3.6.1.4.1.7165.2.1.38 NAME 'sambaDomainName' + DESC 'Windows NT domain to which the user belongs' + EQUALITY caseIgnoreMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{128} ) + +attributetype ( 1.3.6.1.4.1.7165.2.1.47 NAME 'sambaMungedDial' + DESC '' + EQUALITY caseExactMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{1050} ) + +attributetype ( 1.3.6.1.4.1.7165.2.1.54 NAME 'sambaPasswordHistory' + DESC 'Concatenated MD4 hashes of the unicode passwords used on this account' + EQUALITY caseIgnoreIA5Match + SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{32} ) + +## +## SID, of any type +## + +attributetype ( 1.3.6.1.4.1.7165.2.1.20 NAME 'sambaSID' + DESC 'Security ID' + EQUALITY caseIgnoreIA5Match + SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{64} SINGLE-VALUE ) + + +## +## Primary group SID, compatible with ntSid +## + +attributetype ( 1.3.6.1.4.1.7165.2.1.23 NAME 'sambaPrimaryGroupSID' + DESC 'Primary Group Security ID' + EQUALITY caseIgnoreIA5Match + SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{64} SINGLE-VALUE ) + +attributetype ( 1.3.6.1.4.1.7165.2.1.51 NAME 'sambaSIDList' + DESC 'Security ID List' + EQUALITY caseIgnoreIA5Match + SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{64} ) + +## +## group mapping attributes +## +attributetype ( 1.3.6.1.4.1.7165.2.1.19 NAME 'sambaGroupType' + DESC 'NT Group Type' + EQUALITY integerMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) + +## +## Store info on the domain +## + +attributetype ( 1.3.6.1.4.1.7165.2.1.21 NAME 'sambaNextUserRid' + DESC 'Next NT rid to give our for users' + EQUALITY integerMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) + +attributetype ( 1.3.6.1.4.1.7165.2.1.22 NAME 'sambaNextGroupRid' + DESC 'Next NT rid to give out for groups' + EQUALITY integerMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) + +attributetype ( 1.3.6.1.4.1.7165.2.1.39 NAME 'sambaNextRid' + DESC 'Next NT rid to give out for anything' + EQUALITY integerMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) + +attributetype ( 1.3.6.1.4.1.7165.2.1.40 NAME 'sambaAlgorithmicRidBase' + DESC 'Base at which the samba RID generation algorithm should operate' + EQUALITY integerMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) + +attributetype ( 1.3.6.1.4.1.7165.2.1.41 NAME 'sambaShareName' + DESC 'Share Name' + EQUALITY caseIgnoreMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE ) + +attributetype ( 1.3.6.1.4.1.7165.2.1.42 NAME 'sambaOptionName' + DESC 'Option Name' + EQUALITY caseIgnoreMatch + SUBSTR caseIgnoreSubstringsMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{256} ) + +attributetype ( 1.3.6.1.4.1.7165.2.1.43 NAME 'sambaBoolOption' + DESC 'A boolean option' + EQUALITY booleanMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE ) + +attributetype ( 1.3.6.1.4.1.7165.2.1.44 NAME 'sambaIntegerOption' + DESC 'An integer option' + EQUALITY integerMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) + +attributetype ( 1.3.6.1.4.1.7165.2.1.45 NAME 'sambaStringOption' + DESC 'A string option' + EQUALITY caseExactIA5Match + SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) + +attributetype ( 1.3.6.1.4.1.7165.2.1.46 NAME 'sambaStringListOption' + DESC 'A string list option' + EQUALITY caseIgnoreMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 ) + + +attributetype ( 1.3.6.1.4.1.7165.2.1.50 NAME 'sambaPrivName' + SUP name ) + +attributetype ( 1.3.6.1.4.1.7165.2.1.52 NAME 'sambaPrivilegeList' + DESC 'Privileges List' + EQUALITY caseIgnoreIA5Match + SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{64} ) + +attributetype ( 1.3.6.1.4.1.7165.2.1.53 NAME 'sambaTrustFlags' + DESC 'Trust Password Flags' + EQUALITY caseIgnoreIA5Match + SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) + + +####################################################################### +## objectClasses used by Samba 3.0 schema ## +####################################################################### + +## The X.500 data model (and therefore LDAPv3) says that each entry can +## only have one structural objectclass. OpenLDAP 2.0 does not enforce +## this currently but will in v2.1 + +## +## added new objectclass (and OID) for 3.0 to help us deal with backwards +## compatibility with 2.2 installations (e.g. ldapsam_compat) --jerry +## +objectclass ( 1.3.6.1.4.1.7165.2.2.6 NAME 'sambaSamAccount' SUP top AUXILIARY + DESC 'Samba 3.0 Auxilary SAM Account' + MUST ( uid $ sambaSID ) + MAY ( cn $ sambaLMPassword $ sambaNTPassword $ sambaPwdLastSet $ + sambaLogonTime $ sambaLogoffTime $ sambaKickoffTime $ + sambaPwdCanChange $ sambaPwdMustChange $ sambaAcctFlags $ + displayName $ sambaHomePath $ sambaHomeDrive $ sambaLogonScript $ + sambaProfilePath $ description $ sambaUserWorkstations $ + sambaPrimaryGroupSID $ sambaDomainName $ sambaMungedDial $ + sambaBadPasswordCount $ sambaBadPasswordTime $ + sambaPasswordHistory $ sambaLogonHours)) + +## +## Group mapping info +## +objectclass ( 1.3.6.1.4.1.7165.2.2.4 NAME 'sambaGroupMapping' SUP top AUXILIARY + DESC 'Samba Group Mapping' + MUST ( gidNumber $ sambaSID $ sambaGroupType ) + MAY ( displayName $ description $ sambaSIDList )) + +## +## Trust password for trust relationships (any kind) +## +objectclass ( 1.3.6.1.4.1.7165.2.2.14 NAME 'sambaTrustPassword' SUP top STRUCTURAL + DESC 'Samba Trust Password' + MUST ( sambaDomainName $ sambaNTPassword $ sambaTrustFlags ) + MAY ( sambaSID $ sambaPwdLastSet )) + +## +## Whole-of-domain info +## +objectclass ( 1.3.6.1.4.1.7165.2.2.5 NAME 'sambaDomain' SUP top STRUCTURAL + DESC 'Samba Domain Information' + MUST ( sambaDomainName $ + sambaSID ) + MAY ( sambaNextRid $ sambaNextGroupRid $ sambaNextUserRid $ + sambaAlgorithmicRidBase ) ) + +## +## used for idmap_ldap module +## +objectclass ( 1.3.6.1.4.1.7165.2.2.7 NAME 'sambaUnixIdPool' SUP top AUXILIARY + DESC 'Pool for allocating UNIX uids/gids' + MUST ( uidNumber $ gidNumber ) ) + + +objectclass ( 1.3.6.1.4.1.7165.2.2.8 NAME 'sambaIdmapEntry' SUP top AUXILIARY + DESC 'Mapping from a SID to an ID' + MUST ( sambaSID ) + MAY ( uidNumber $ gidNumber ) ) + +objectclass ( 1.3.6.1.4.1.7165.2.2.9 NAME 'sambaSidEntry' SUP top STRUCTURAL + DESC 'Structural Class for a SID' + MUST ( sambaSID ) ) + +objectclass ( 1.3.6.1.4.1.7165.1.2.2.10 NAME 'sambaConfig' SUP top AUXILIARY + DESC 'Samba Configuration Section' + MAY ( description ) ) + +objectclass ( 1.3.6.1.4.1.7165.2.2.11 NAME 'sambaShare' SUP top STRUCTURAL + DESC 'Samba Share Section' + MUST ( sambaShareName ) + MAY ( description ) ) + +objectclass ( 1.3.6.1.4.1.7165.2.2.12 NAME 'sambaConfigOption' SUP top STRUCTURAL + DESC 'Samba Configuration Option' + MUST ( sambaOptionName ) + MAY ( sambaBoolOption $ sambaIntegerOption $ sambaStringOption $ + sambaStringListoption $ description ) ) + + +objectclass ( 1.3.6.1.4.1.7165.2.2.13 NAME 'sambaPrivilege' SUP top AUXILIARY + DESC 'Samba Privilege' + MUST ( sambaSID ) + MAY ( sambaPrivilegeList ) ) + diff --git a/net-fs/samba/files/config/smb.conf.example-samba3 b/net-fs/samba/files/config/smb.conf.example-samba3 new file mode 100644 index 000000000000..1c1216fc29aa --- /dev/null +++ b/net-fs/samba/files/config/smb.conf.example-samba3 @@ -0,0 +1,478 @@ +# This is the main Samba configuration file. You should read the +# smb.conf(5) manual page in order to understand the options listed +# here. Samba has a huge number of configurable options (perhaps too +# many!) most of which are not shown in this example +# +# For a step to step guide on installing, configuring and using samba, +# read the Samba-HOWTO-Collection. This may be obtained from: +# http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf +# +# Many working examples of smb.conf files can be found in the +# Samba-Guide which is generated daily and can be downloaded from: +# http://www.samba.org/samba/docs/Samba-Guide.pdf +# +# Any line which starts with a ; (semi-colon) or a # (hash) +# is a comment and is ignored. In this example we will use a # +# for commentry and a ; for parts of the config file that you +# may wish to enable +# +# NOTE: Whenever you modify this file you should run the command "testparm" +# to check that you have not made any basic syntactic errors. +# +#======================= Global Settings ===================================== +[global] + +# 1. Server Naming Options: +# workgroup = NT-Domain-Name or Workgroup-Name + workgroup = MYGROUP + +# netbios name is the name you will see in "Network Neighbourhood", +# but defaults to your hostname +; netbios name = <name_of_this_server> + +# server string is the equivalent of the NT Description field + server string = Samba Server %v + +# 2. Printing Options: +# CHANGES TO ENABLE PRINTING ON ALL CUPS PRINTERS IN THE NETWORK +# if you want to automatically load your printer list rather +# than setting them up individually then you'll need this + printcap name = cups + load printers = yes + +# It should not be necessary to spell out the print system type unless +# yours is non-standard. Currently supported print systems include: +# bsd, sysv, plp, lprng, aix, hpux, qnx, cups + printing = cups + +# 3. Logging Options: +# this tells Samba to use a separate log file for each machine +# that connects + log file = /var/log/samba/log.%m + +# Put a capping on the size of the log files (in Kb). + max log size = 50 + +# Set the log (verbosity) level (0 <= log level <= 10) +; log level = 3 + +# 4. Security and Domain Membership Options: +# This option is important for security. It allows you to restrict +# connections to machines which are on your local network. The +# following example restricts access to two C class networks and +# the "loopback" interface. For more examples of the syntax see +# the smb.conf man page. Do not enable this if (tcp/ip) name resolution does +# not work for all the hosts in your network. +; hosts allow = 192.168.1. 192.168.2. 127. + +# Uncomment this if you want a guest account, you must add this to /etc/passwd +# otherwise the user "nobody" is used +; guest account = pcguest +# Allow users to map to guest: + map to guest = bad user + +# Security mode. Most people will want user level security. See +# security_level.txt for details. + security = user +# Use password server option only with security = server or security = domain +# When using security = domain, you should use password server = * +; password server = <NT-Server-Name> +; password server = * + +# Password Level allows matching of _n_ characters of the password for +# all combinations of upper and lower case. +; password level = 8 +; username level = 8 + +# You may wish to use password encryption. Please read +# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation. +# Do not enable this option unless you have read those documents +# Encrypted passwords are required for any use of samba in a Windows NT domain +# The smbpasswd file is only required by a server doing authentication, thus +# members of a domain do not need one. + encrypt passwords = yes + +# The following are needed to allow password changing from Windows to +# also update the Linux system password. +# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above. +# NOTE2: You do NOT need these to allow workstations to change only +# the encrypted SMB passwords. They allow the Unix password +# to be kept in sync with the SMB password. +; unix password sync = Yes +# You either need to setup a passwd program and passwd chat, or +# enable pam password change +; pam password change = yes +; passwd program = /usr/bin/passwd %u +; passwd chat = *New*UNIX*password* %n\n *Re*ype*new*UNIX*password* %n\n \ +;*passwd:*all*authentication*tokens*updated*successfully* + +# Unix users can map to different SMB User names +; username map = /etc/samba/smbusers + +# Using the following line enables you to customise your configuration +# on a per machine basis. The %m gets replaced with the netbios name +# of the machine that is connecting +; include = /etc/samba/smb.conf.%m + +# Options for using winbind. Winbind allows you to do all account and +# authentication from a Windows or samba domain controller, creating +# accounts on the fly, and maintaining a mapping of Windows RIDs to unix uid's +# and gid's. idmap uid and idmap gid are the only required parameters. +# +# winbind separator is the character a user must use between their domain +# name and username, defaults to "\" +; winbind separator = + +# +# winbind use default domain allows you to have winbind return usernames +# in the form user instead of DOMAIN+user for the domain listed in the +# workgroup parameter. +; winbind use default domain = yes +# +# template homedir determines the home directory for winbind users, with +# %D expanding to their domain name and %U expanding to their username: +; template homedir = /home/%D/%U + +# When using winbind, you may want to have samba create home directories +# on the fly for authenticated users. Ensure that /etc/pam.d/samba is +# using 'service=system-auth-winbind' in pam_stack modules, and then +# enable obedience of pam restrictions below: +; obey pam restrictions = yes + +# +# template shell determines the shell users authenticated by winbind get +; template shell = /bin/bash + +# 5. Browser Control and Networking Options: +# Most people will find that this option gives better performance. +# See speed.txt and the manual pages for details + socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 + +# Configure Samba to use multiple interfaces +# If you have multiple network interfaces then you must list them +# here. See the man page for details. +; interfaces = 192.168.12.2/24 192.168.13.2/24 + +# Configure remote browse list synchronisation here +# request announcement to, or browse list sync from: +# a specific host or from / to a whole subnet (see below) +; remote browse sync = 192.168.3.25 192.168.5.255 +# Cause this host to announce itself to local subnets here +; remote announce = 192.168.1.255 192.168.2.44 + +# set local master to no if you don't want Samba to become a master +# browser on your network. Otherwise the normal election rules apply +; local master = no + +# OS Level determines the precedence of this server in master browser +# elections. The default value should be reasonable +; os level = 33 + +# Domain Master specifies Samba to be the Domain Master Browser. This +# allows Samba to collate browse lists between subnets. Don't use this +# if you already have a Windows NT domain controller doing this job +; domain master = yes + +# Preferred Master causes Samba to force a local browser election on startup +# and gives it a slightly higher chance of winning the election +; preferred master = yes + +# 6. Domain Control Options: +# Enable this if you want Samba to be a domain logon server for +# Windows95 workstations or Primary Domain Controller for WinNT and Win2k +; domain logons = yes + +# if you enable domain logons then you may want a per-machine or +# per user logon script +# run a specific logon batch file per workstation (machine) +; logon script = %m.bat +# run a specific logon batch file per username +; logon script = %U.bat + +# Where to store roaming profiles for WinNT and Win2k +# %L substitutes for this servers netbios name, %U is username +# You must uncomment the [Profiles] share below +; logon path = \\%L\Profiles\%U + +# Where to store roaming profiles for Win9x. Be careful with this as it also +# impacts where Win2k finds it's /HOME share +; logon home = \\%L\%U\.profile + + +# The add user script is used by a domain member to add local user accounts +# that have been authenticated by the domain controller, or when adding +# users via the Windows NT Tools (ie User Manager for Domains). + +# Scripts for file (passwd, smbpasswd) backend: +; add user script = /usr/sbin/useradd -s /bin/false '%u' +; delete user script = /usr/sbin/userdel '%s' +; add user to group script = /usr/bin/gpasswd -a '%u' '%g' +; delete user from group script = /usr/bin/gpasswd -d '%u' '%g' +; set primary group script = /usr/sbin/usermod -g '%g' '%u' +; add group script = /usr/sbin/groupadd %g && getent group '%g'|awk -F: '{print $3}' +; delete group script = /usr/sbin/groupdel '%g' + +# Scripts for LDAP backend (assumes nss_ldap is in use on the domain controller. +# Needs IDEALX scripts, and configuration in smbldap_conf.pm. +# This assumes you've installed the IDEALX scripts into /usr/share/samba/scripts... +; add user script = /usr/share/samba/scripts/smbldap-useradd.pl '%u' +; delete user script = /usr/share/samba/scripts/smbldap-userdel.pl '%u' +; add user to group script = /usr/share/samba/scripts/smbldap-groupmod.pl -m '%u' '%g' +; delete user from group script = /usr/share/samba/scripts/smbldap-groupmod.pl -x '%u' '%g' +; set primary group script = /usr/share/samba/scripts/smbldap-usermod.pl -g '%g' '%u' +; add group script = /usr/share/samba/scripts/smbldap-groupadd.pl '%g' && /usr/share/samba/scripts/smbldap-groupshow.pl %g|awk '/^gidNumber:/ {print $2}' +; delete group script = /usr/share/samba/scripts/smbldap-userdel.pl '%g' + + +# The add machine script is use by a samba server configured as a domain +# controller to add local machine accounts when adding machines to the domain. +# The script must work from the command line when replacing the macros, +# or the operation will fail. Check that groups exist if forcing a group. +# Script for domain controller for adding machines: +; add machine script = /usr/sbin/useradd -d /dev/null -g machines -c 'Machine Account' -s /bin/false '%u' +# Script for domain controller with LDAP backend for adding machines (You need +# the IDEALX scripts, and to configure the smbldap_conf.pm first): +; add machine script = /usr/share/samba/scripts/smbldap-useradd.pl -w -d /dev/null -g machines -c 'Machine Account' -s /bin/false '%u' + +# Domain groups: +# Domain groups are now configured by using the 'net groupmap' tool + +# Samba Password Database configuration: +# Samba now has runtime-configurable password database backends. +# smbpasswd is for backwards compatibility only Default (not recommended), +# new installations should use tdbsam or ldap. +; passdb backend = smbpasswd +# TDB backend +; passdb backend = tdbsam +# LDAP with fallback to smbpasswd guest +# Enable SSL by using an ldaps url, or enable tls with 'ldap ssl' below. +; passdb backend = ldapsam:ldaps://ldap.mydomain.com +# Use the samba2 LDAP schema: +; passdb backend = ldapsam_compat:ldaps://ldap.mydomain.com + +# idmap uid account range: +# This is a range of unix user-id's that samba will map non-unix RIDs to, +# such as when using Winbind +; idmap uid = 10000-20000 +; idmap gid = 10000-20000 + +# LDAP configuration for Domain Controlling: +# The account (dn) that samba uses to access the LDAP server +# This account needs to have write access to the LDAP tree +# You will need to give samba the password for this dn, by +# running 'smbpasswd -w mypassword' +; ldap admin dn = cn=root,dc=mydomain,dc=com +; ldap ssl = start_tls +# start_tls should run on 389, but samba defaults incorrectly to 636 +; ldap port = 389 +; ldap suffix = dc=mydomain,dc=com +; ldap server = ldap.mydomain.com +# Seperate suffixes are available for machines, users, groups, and idmap, if +# ldap suffix appears first, it is appended to the specific suffix. +# Example for a unix-ish directory layout: +; ldap machine suffix = ou=Hosts +; ldap user suffix = ou=People +; ldap group suffix = ou=Group +; ldap idmap suffix = ou=Idmap +# Example for AD-ish layout: +; ldap machine suffix = cn=Computers +; ldap user suffix = cn=Users +; ldap group suffix = cn=Groups +; ldap idmap suffix = cn=Idmap + + +# 7. Name Resolution Options: +# All NetBIOS names must be resolved to IP Addresses +# 'Name Resolve Order' allows the named resolution mechanism to be specified +# the default order is "host lmhosts wins bcast". "host" means use the unix +# system gethostbyname() function call that will use either /etc/hosts OR +# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf +# and the /etc/resolv.conf file. "host" therefore is system configuration +# dependant. This parameter is most often of use to prevent DNS lookups +# in order to resolve NetBIOS names to IP Addresses. Use with care! +# The example below excludes use of name resolution for machines that are NOT +# on the local network segment +# - OR - are not deliberately to be known via lmhosts or via WINS. +; name resolve order = wins host lmhosts bcast + +# Windows Internet Name Serving Support Section: +# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server +; wins support = yes + +# WINS Server - Tells the NMBD components of Samba to be a WINS Client +# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both +; wins server = w.x.y.z + +# WINS Proxy - Tells Samba to answer name resolution queries on +# behalf of a non WINS capable client, for this to work there must be +# at least one WINS Server on the network. The default is NO. +; wins proxy = yes + +# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names +# via DNS nslookups. The built-in default for versions 1.9.17 is yes, +# this has been changed in version 1.9.18 to no. + dns proxy = no + +# 8. File Naming Options: +# Case Preservation can be handy - system default is _no_ +# NOTE: These can be set on a per share basis +; preserve case = no +; short preserve case = no +# Default case is normally upper case for all DOS files +; default case = lower +# Be very careful with case sensitivity - it can break things! +; case sensitive = no + +# Enabling internationalization: +# you can match a Windows code page with a UNIX character set. +# Windows: 437 (US), 737 (GREEK), 850 (Latin1 - Western European), +# 852 (Czech), 861 (???), 932 (Japanese), +# 936 (Simplified Chin.), 949 (Korean Hangul), +# 950 (Trad. Chin.). +# More detail about code page is in +# "http://www.microsoft.com/globaldev/reference/oslocversion.mspx" +# UNIX: ISO8859-1 (Western European), ISO8859-2 (Eastern Eu.), +# ISO8859-5 (Russian Cyrillic), KOI8-R (Alt-Russ. Cyril.) +# This is an example for french users: +; dos charset = 850 +; unix charset = ISO8859-1 + + +#============================ Share Definitions ============================== +[homes] + comment = Home Directories + browseable = no + writable = yes +# You can enable VFS recycle bin on a per share basis: +# Uncomment the next 2 lines (make sure you create a +# .recycle folder in the base of the share and ensure +# all users will have write access to it. See +# examples/VFS/recycle/REAME in the samba docs for details +; vfs object = /usr/lib/samba/vfs/recycle.so + +# Un-comment the following and create the netlogon directory for Domain Logons +; [netlogon] +; comment = Network Logon Service +; path = /var/lib/samba/netlogon +; guest ok = yes +; writable = no + +# Un-comment the following to provide a specific roving profile share +# the default is to use the user's home directory +;[Profiles] +; path = /var/lib/samba/profiles +; browseable = no +; guest ok = yes +# This script can be enabled to create profile directories on the fly +# You may want to turn off guest acces if you enable this, as it +# hasn't been thoroughly tested. +;root preexec = PROFILE=/var/lib/samba/profiles/%u; if [ ! -e $PROFILE ]; \ +; then mkdir -pm700 $PROFILE; chown %u:%g $PROFILE;fi + +# NOTE: If you have a CUPS print system there is no need to +# specifically define each individual printer. +# You must configure the samba printers with the appropriate Windows +# drivers on your Windows clients. On the Samba server no filtering is +# done. If you wish that the server provides the driver and the clients +# send PostScript ("Generic PostScript Printer" under Windows), you have +# to swap the 'print command' line below with the commented one. +[printers] + comment = All Printers + path = /var/spool/samba + browseable = no +# set to yes to allow user 'guest account' to print. + guest ok = no + writable = no + printable = yes + +# This share is used for Windows NT-style point-and-print support. +# To be able to install drivers, you need to be either root, or listed +# in the printer admin parameter above. Note that you also need write access +# to the directory and share definition to be able to upload the drivers. +# For more information on this, please see the Printing Support Section of +# /usr/share/doc/samba-<version>/Samba-HOWTO-Collection.pdf +[print$] + path = /var/lib/samba/printers + browseable = yes + read only = yes + write list = @adm root + guest ok = yes + +# This one is useful for people to share files +;[tmp] +; comment = Temporary file space +; path = /tmp +; read only = no +; public = yes + +# A publicly accessible directory, but read only, except for people in +# the "staff" group +;[public] +; comment = Public Stuff +; path = /home/samba/public +; public = yes +; writable = no +; write list = @staff +# Audited directory through experimental VFS audit.so module: +# Uncomment next line. +; vfs object = /usr/lib/samba/vfs/audit.so + +# Other examples. +# +# A private printer, usable only by Fred. Spool data will be placed in Fred's +# home directory. Note that fred must have write access to the spool directory, +# wherever it is. +;[fredsprn] +; comment = Fred's Printer +; valid users = fred +; path = /homes/fred +; printer = freds_printer +; public = no +; writable = no +; printable = yes + +# A private directory, usable only by Fred. Note that Fred requires write +# access to the directory. +;[fredsdir] +; comment = Fred's Service +; path = /usr/somewhere/private +; valid users = fred +; public = no +; writable = yes +; printable = no + +# a service which has a different directory for each machine that connects +# this allows you to tailor configurations to incoming machines. You could +# also use the %u option to tailor it by user name. +# The %m gets replaced with the machine name that is connecting. +;[pchome] +; comment = PC Directories +; path = /usr/pc/%m +; public = no +; writable = yes + +# A publicly accessible directory, read/write to all users. Note that all files +# created in the directory by users will be owned by the default user, so +# any user with access can delete any other user's files. Obviously this +# directory must be writable by the default user. Another user could of course +# be specified, in which case all files would be owned by that user instead. +;[public] +; path = /usr/somewhere/else/public +; public = yes +; only guest = yes +; writable = yes +; printable = no + +# The following two entries demonstrate how to share a directory so that two +# users can place files there that will be owned by the specific users. In this +# setup, the directory should be writable by both users and should have the +# sticky bit set on it to prevent abuse. Obviously this could be extended to +# as many users as required. +;[myshare] +; comment = Mary's and Fred's stuff +; path = /usr/somewhere/shared +; valid users = mary fred +; public = no +; writable = yes +; printable = no +; create mask = 0765 + diff --git a/net-fs/samba/files/config/smbusers b/net-fs/samba/files/config/smbusers new file mode 100644 index 000000000000..3a5fb67e9fb6 --- /dev/null +++ b/net-fs/samba/files/config/smbusers @@ -0,0 +1,4 @@ +# Unix_name = SMB_name1 SMB_name2 ... +# $Header: /var/cvsroot/gentoo-x86/net-fs/samba/files/config/smbusers,v 1.1 2007/09/07 21:07:40 dev-zero Exp $ +root = administrator admin +nobody = guest pcguest smbguest diff --git a/net-fs/samba/files/config/swat.xinetd b/net-fs/samba/files/config/swat.xinetd new file mode 100644 index 000000000000..1436dcbe0f4d --- /dev/null +++ b/net-fs/samba/files/config/swat.xinetd @@ -0,0 +1,17 @@ +# default: off +# description: SWAT is the Samba Web Admin Tool. Use swat \ +# to configure your Samba server. To use SWAT, \ +# connect to port 901 with your favorite web browser. +# $Header: /var/cvsroot/gentoo-x86/net-fs/samba/files/config/swat.xinetd,v 1.1 2007/09/07 21:07:40 dev-zero Exp $ + +service swat +{ + port = 901 + socket_type = stream + wait = no + only_from = localhost + user = root + server = /usr/sbin/swat + log_on_failure += USERID + disable = yes +} diff --git a/net-fs/samba/files/config/system-auth-winbind b/net-fs/samba/files/config/system-auth-winbind new file mode 100644 index 000000000000..d3ef029a8cd7 --- /dev/null +++ b/net-fs/samba/files/config/system-auth-winbind @@ -0,0 +1,18 @@ +#%PAM-1.0 +# $Header: /var/cvsroot/gentoo-x86/net-fs/samba/files/config/system-auth-winbind,v 1.1 2007/09/07 21:07:40 dev-zero Exp $ + +auth required /lib/security/pam_env.so +auth sufficient /lib/security/pam_winbind.so +auth sufficient /lib/security/pam_unix.so likeauth nullok use_first_pass +auth required /lib/security/pam_deny.so + +account sufficient /lib/security/pam_winbind.so +account required /lib/security/pam_unix.so + +password required /lib/security/pam_cracklib.so retry=3 +password sufficient /lib/security/pam_unix.so nullok use_authtok md5 shadow +password required /lib/security/pam_deny.so + +session required /lib/security/pam_mkhomedir.so skel=/etc/skel/ umask=0022 +session required /lib/security/pam_limits.so +session required /lib/security/pam_unix.so diff --git a/net-fs/samba/files/digest-samba-3.0.25c b/net-fs/samba/files/digest-samba-3.0.25c new file mode 100644 index 000000000000..f7be3ff4f8de --- /dev/null +++ b/net-fs/samba/files/digest-samba-3.0.25c @@ -0,0 +1,3 @@ +MD5 87950694270b86cbc1b2074cb53dd1aa samba-3.0.25c.tar.gz 18178029 +RMD160 7c8de2c27144b2b23e7c3f4a8fceb35bddfd571b samba-3.0.25c.tar.gz 18178029 +SHA256 113144b8a035b1be289eaed3a12a3e8138e47f21fd79c9cc7bbf4f7eabc2870c samba-3.0.25c.tar.gz 18178029 diff --git a/net-fs/samba/files/samba-init b/net-fs/samba/files/samba-init index 4ae283d496b7..af7b7c64d29f 100644 --- a/net-fs/samba/files/samba-init +++ b/net-fs/samba/files/samba-init @@ -1,7 +1,7 @@ #!/sbin/runscript # Copyright 1999-2007 Gentoo Foundation # Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo-x86/net-fs/samba/files/samba-init,v 1.14 2007/04/09 09:40:15 dev-zero Exp $ +# $Header: /var/cvsroot/gentoo-x86/net-fs/samba/files/samba-init,v 1.15 2007/09/07 21:07:39 dev-zero Exp $ opts="reload" @@ -11,6 +11,11 @@ depend() { use cupsd } +DAEMONNAME="${SVCNAME##samba.}" +if [[ -n ${DAEMONNAME} ]] ; then + daemon_list=${DAEMONNAME} +fi + signal_do() { local signal="$1" [ -z "${signal}" ] && return 0 diff --git a/net-fs/samba/files/samba-xinetd b/net-fs/samba/files/samba-xinetd new file mode 100644 index 000000000000..a85f5b3ab20c --- /dev/null +++ b/net-fs/samba/files/samba-xinetd @@ -0,0 +1,12 @@ +# Samba smb service with ipv6 support (for samba3) +# Remember to stop samba service starting smbd before you activate this. +service microsoft-ds +{ + flags = REUSE IPV6 + socket_type = stream + wait = no + user = root + server = /usr/sbin/smbd + log_on_failure += USERID + disable = yes +} |