Removed files related to old magicfilter ebuild to reduce confusion.

6 files changed, 0 insertions, 544 deletions

diff --git a/net-print/magicfilter/files/StylusColor-777-Photo-filter b/net-print/magicfilter/files/StylusColor-777-Photo-filter
deleted file mode 100644
index cdaa30c87625..000000000000
--- a/net-print/magicfilter/files/StylusColor-777-Photo-filter
+++ /dev/null
@@ -1,157 +0,0 @@
-#!/usr/sbin/magicfilter
-# vim:set nowrap:
-#
-# Magic filter setup file for the EPSON Stylus Color 777 printer operating
-# at 360 dpi, originally based on StylusColor-800@360dpi-filter.
-# 
-# 8 July 2001 agriffis
-
-# All documents sent to the printer should be prefixed by the magic
-# command and the reset code.  The 'magic command' takes the printer
-# out of the Epson packet mode communication protocol (whatever that
-# is) and enables normal data transfer.  The 'reset code' discards any
-# output, ejects the existing page, and returns all settings to their
-# default.
-0	\000\000\000\033\001@EJL\ 1284.4\n@EJL\ \ \ \ \ \n\033@	cat
-
-# Native printer control codes start with <ESC>, but if this wasn't
-# recognized by the magic above, then the reset code should be
-# prefixed.  Then we pass the document to the printer, cross our
-# fingers and hope for the best.
-#
-# Note that we add a ff/reset on the end just for good measure...
-0	\033	cat \000\000\000\033\001@EJL\ 1284.4\n@EJL\ \ \ \ \ \n\033@ \014\033@
-
-# PostScript, use ghostscript with the gimp-print driver.  This is
-# done as a pipe (instead of a filter, which would go directly to the
-# printer) so that magicfilter can then decide whether or not a reset
-# sequence should be prefixed to the output.
-0	%!		pipe	/usr/bin/gs -q @stc777-photo.upp -sOutputFile=- - -c quit 
-0	\004%!		pipe	/usr/bin/gs -q @stc777-photo.upp -sOutputFile=- - -c quit 
-
-# PDF
-0	%PDF		fpipe /usr/bin/pdftops  $FILE - 
-
-# TeX DVI
-0	\367\002	fpipe	/usr/bin/dvips  -D 360  -R -q -f 
-
-# compress'd data
-0	\037\235	pipe	/bin/gzip  -cdq 
-
-# packed, gzipped, frozen and SCO LZH data
-0	\037\036	pipe	/bin/gzip  -cdq 
-0	\037\213	pipe	/bin/gzip  -cdq 
-0	\037\236	pipe	/bin/gzip  -cdq 
-0	\037\240	pipe	/bin/gzip  -cdq 
-
-0	BZh		pipe	/usr/bin/bzip2  -cdq 
-
-# troff documents
-0	.\?\?\040	fpipe 	`/usr/bin/grog  -Tps $FILE` 
-0	.\\\"		fpipe 	`/usr/bin/grog  -Tps $FILE` 
-0	'\\\"		fpipe 	`/usr/bin/grog  -Tps $FILE` 
-0	'.\\\"		fpipe 	`/usr/bin/grog  -Tps $FILE` 
-0	\\\"		fpipe 	`/usr/bin/grog  -Tps $FILE` 
-
-# ditroff
-0	"x T ps"	pipe 	/usr/bin/grops 
-0	"x T dvi"	pipe	/usr/bin/grodvi 
-0	"x T ascii"	pipe	/usr/bin/grotty 
-0	"x T latin1"	pipe	/usr/bin/grotty 
-0	"x T lj4"	reject	Cannot print LaserJet 4 ditroff files.
-
-# Portable bit-, grey- and pixmaps
-0	P1\n		pipe 	/usr/bin/pnmtops  -scale 1000 -dpi 360  2>/dev/null 
-0	P2\n		pipe 	/usr/bin/pnmtops  -scale 1000 -dpi 360  2>/dev/null 
-0	P3\n		pipe 	/usr/bin/pnmtops  -scale 1000 -dpi 360  2>/dev/null 
-0	P4\n		pipe 	/usr/bin/pnmtops  -scale 1000 -dpi 360  2>/dev/null 
-0	P5\n		pipe 	/usr/bin/pnmtops  -scale 1000 -dpi 360  2>/dev/null 
-0	P6\n		pipe 	/usr/bin/pnmtops  -scale 1000 -dpi 360  2>/dev/null 
-
-# PNG - Portable network graphics
-0	\x89PNG		pipe	/usr/bin/pngtopnm 
-
-# HP Printer Control Language (PCL) -- assume start with reset code
-0	\033E\033	reject	Cannot print PCL files on this printer. 
-
-# HP Printer Job Language (PJL)
-0	\033%-12345X	reject	Cannot print PJL files on this printer. 
-0	"@PJL "		reject	Cannot print PJL files on this printer. 
-0	@PJL\t		reject	Cannot print PJL files on this printer. 
-0	@PJL\r		reject	Cannot print PJL files on this printer. 
-0	@PJL\n		reject	Cannot print PJL files on this printer. 
-
-# GIF files
-0	GIF87a		pipe	/usr/bin/giftopnm  2>/dev/null
-0	GIF89a		pipe	/usr/bin/giftopnm  2>/dev/null
-
-# JFIF (JPEG) files
-0	\377\330\377\340\?\?JFIF\0	pipe	/usr/bin/djpeg  -pnm
-# Bug 40599
-0	\377\330\377\341\?\?Exif\0	pipe	/usr/bin/djpeg  -pnm
-
-# TIFF files (the last two bytes of the "magic" is really a version number;
-# but the magic is really lame and as far as I have understood the version
-# number has never changed and never will, so we include it.)
-0	MM\0\x2a	fpipe   /usr/bin/tiff2ps  -a $FILE
-0	II\x2a\0	fpipe   /usr/bin/tiff2ps  -a $FILE 
-
-# BMP files (even lousier magic -- Microsoft strikes again!)
-0	BM\?\?\?\?\?\?\?\?\?\?\?\?\x0c	pipe	\
-	/usr/bin/bmptoppm  2>/dev/null
-0	BM\?\?\?\?\?\?\?\?\?\?\?\?\x40	pipe	\
-	/usr/bin/bmptoppm  2>/dev/null
-0	BM\?\?\?\?\?\?\?\?\?\?\?\?\x28	pipe	\
-	/usr/bin/bmptoppm  2>/dev/null
-
-# Garbage delivered from Windows via Samba
-# (donated by Andree Leidenfrost <leidenfrost@dkrz.de>)
-# 300     \033\052\157    cat
-# later changed to 
-# (Bug report #22866: magicfilter: Incorrect magic for Win95/Samba print jobs)
-0       \000\000\000\000\000   cat
-
-# Sun rasterfiles
-0	\x59\xa6\x6a\x95 pipe	/usr/bin/rasttopnm  2>/dev/null
-
-# SGI Imagelib (IRIS RGB) files
-0	\x1\xda		pipe	/usr/bin/sgitopnm  2>/dev/null
-0	\xda\x1		pipe	/usr/bin/sgitopnm  2>/dev/null
-
-# FIG files; reported by Steven P. Hill <sph@uscbu.ih.att.com>
-0	\043FIG		pipe	/usr/bin/fig2dev  -Lps -P -l dummy
-
-#
-# Standard rejects... things we don't want to print
-#
-
-# Various archive formats
-257	ustar\0		reject	Attempted to print a tar file.
-257	"ustar  \0"	reject	Attempted to print a tar file.
-0	07070		reject	Attempted to print a cpio file.
-0	PK\3\4		reject	Attempted to print a zip file.
-20	\xdc\xa7\xc7\xfd reject	Attempted to print a zoo file.
-
-# Binaries (Linux): reject with email message
-0	\013\1d\0	reject	Attempted to print a compiled binary.
-0	\100\1d\0	reject	Attempted to print a compiled binary.
-0	\007\1d\0	reject	Attempted to print a compiled binary.
-0	\314\0d\0	reject	Attempted to print a compiled binary.
-0	\177ELF		reject	Attempted to print an ELF object.
-0	\007\001\0	reject	Attempted to print an object file.
-216	\021\001\0\0	reject	Attempted to print a core dump file.
-0	!<arch>		reject	Attempted to print an archive.
-0	=<ar>		reject	Attempted to print an archive.
-
-# Don't confuse this one with troff!
-0	.snd		reject	Attempted to print Sun/NeXT audio data.
-
-# wacko troff magic
-0	'''		fpipe 	`/usr/bin/grog  -Tps $FILE` 
-
-# Default entry for normal (text) files.  This must be the last entry!
-# =====================================================================
-# Please adjust recode's codepage conversion manually according to your
-# local needs. We apologize for the inconveniences...
-#
-default filter	/etc/magicfilter/escp-text-helper
diff --git a/net-print/magicfilter/files/StylusColor-777-Picture-filter b/net-print/magicfilter/files/StylusColor-777-Picture-filter
deleted file mode 100644
index 88fa71c0c753..000000000000
--- a/net-print/magicfilter/files/StylusColor-777-Picture-filter
+++ /dev/null
@@ -1,157 +0,0 @@
-#!/usr/sbin/magicfilter
-# vim:set nowrap:
-#
-# Magic filter setup file for the EPSON Stylus Color 777 printer operating
-# at 360 dpi, originally based on StylusColor-800@360dpi-filter.
-# 
-# 8 July 2001 agriffis
-
-# All documents sent to the printer should be prefixed by the magic
-# command and the reset code.  The 'magic command' takes the printer
-# out of the Epson packet mode communication protocol (whatever that
-# is) and enables normal data transfer.  The 'reset code' discards any
-# output, ejects the existing page, and returns all settings to their
-# default.
-0	\000\000\000\033\001@EJL\ 1284.4\n@EJL\ \ \ \ \ \n\033@	cat
-
-# Native printer control codes start with <ESC>, but if this wasn't
-# recognized by the magic above, then the reset code should be
-# prefixed.  Then we pass the document to the printer, cross our
-# fingers and hope for the best.
-#
-# Note that we add a ff/reset on the end just for good measure...
-0	\033	cat \000\000\000\033\001@EJL\ 1284.4\n@EJL\ \ \ \ \ \n\033@ \014\033@
-
-# PostScript, use ghostscript with the gimp-print driver.  This is
-# done as a pipe (instead of a filter, which would go directly to the
-# printer) so that magicfilter can then decide whether or not a reset
-# sequence should be prefixed to the output.
-0	%!		pipe	/usr/bin/gs -q @stc777-picture.upp -sOutputFile=- - -c quit 
-0	\004%!		pipe	/usr/bin/gs -q @stc777-picture.upp -sOutputFile=- - -c quit 
-
-# PDF
-0	%PDF		fpipe /usr/bin/pdftops  $FILE - 
-
-# TeX DVI
-0	\367\002	fpipe	/usr/bin/dvips  -D 360  -R -q -f 
-
-# compress'd data
-0	\037\235	pipe	/bin/gzip  -cdq 
-
-# packed, gzipped, frozen and SCO LZH data
-0	\037\036	pipe	/bin/gzip  -cdq 
-0	\037\213	pipe	/bin/gzip  -cdq 
-0	\037\236	pipe	/bin/gzip  -cdq 
-0	\037\240	pipe	/bin/gzip  -cdq 
-
-0	BZh		pipe	/usr/bin/bzip2  -cdq 
-
-# troff documents
-0	.\?\?\040	fpipe 	`/usr/bin/grog  -Tps $FILE` 
-0	.\\\"		fpipe 	`/usr/bin/grog  -Tps $FILE` 
-0	'\\\"		fpipe 	`/usr/bin/grog  -Tps $FILE` 
-0	'.\\\"		fpipe 	`/usr/bin/grog  -Tps $FILE` 
-0	\\\"		fpipe 	`/usr/bin/grog  -Tps $FILE` 
-
-# ditroff
-0	"x T ps"	pipe 	/usr/bin/grops 
-0	"x T dvi"	pipe	/usr/bin/grodvi 
-0	"x T ascii"	pipe	/usr/bin/grotty 
-0	"x T latin1"	pipe	/usr/bin/grotty 
-0	"x T lj4"	reject	Cannot print LaserJet 4 ditroff files.
-
-# Portable bit-, grey- and pixmaps
-0	P1\n		pipe 	/usr/bin/pnmtops  -scale 1000 -dpi 360  2>/dev/null 
-0	P2\n		pipe 	/usr/bin/pnmtops  -scale 1000 -dpi 360  2>/dev/null 
-0	P3\n		pipe 	/usr/bin/pnmtops  -scale 1000 -dpi 360  2>/dev/null 
-0	P4\n		pipe 	/usr/bin/pnmtops  -scale 1000 -dpi 360  2>/dev/null 
-0	P5\n		pipe 	/usr/bin/pnmtops  -scale 1000 -dpi 360  2>/dev/null 
-0	P6\n		pipe 	/usr/bin/pnmtops  -scale 1000 -dpi 360  2>/dev/null 
-
-# PNG - Portable network graphics
-0	\x89PNG		pipe	/usr/bin/pngtopnm 
-
-# HP Printer Control Language (PCL) -- assume start with reset code
-0	\033E\033	reject	Cannot print PCL files on this printer. 
-
-# HP Printer Job Language (PJL)
-0	\033%-12345X	reject	Cannot print PJL files on this printer. 
-0	"@PJL "		reject	Cannot print PJL files on this printer. 
-0	@PJL\t		reject	Cannot print PJL files on this printer. 
-0	@PJL\r		reject	Cannot print PJL files on this printer. 
-0	@PJL\n		reject	Cannot print PJL files on this printer. 
-
-# GIF files
-0	GIF87a		pipe	/usr/bin/giftopnm  2>/dev/null
-0	GIF89a		pipe	/usr/bin/giftopnm  2>/dev/null
-
-# JFIF (JPEG) files
-0	\377\330\377\340\?\?JFIF\0	pipe	/usr/bin/djpeg  -pnm
-# Bug 40599
-0	\377\330\377\341\?\?Exif\0	pipe	/usr/bin/djpeg  -pnm
-
-# TIFF files (the last two bytes of the "magic" is really a version number;
-# but the magic is really lame and as far as I have understood the version
-# number has never changed and never will, so we include it.)
-0	MM\0\x2a	fpipe   /usr/bin/tiff2ps  -a $FILE
-0	II\x2a\0	fpipe   /usr/bin/tiff2ps  -a $FILE 
-
-# BMP files (even lousier magic -- Microsoft strikes again!)
-0	BM\?\?\?\?\?\?\?\?\?\?\?\?\x0c	pipe	\
-	/usr/bin/bmptoppm  2>/dev/null
-0	BM\?\?\?\?\?\?\?\?\?\?\?\?\x40	pipe	\
-	/usr/bin/bmptoppm  2>/dev/null
-0	BM\?\?\?\?\?\?\?\?\?\?\?\?\x28	pipe	\
-	/usr/bin/bmptoppm  2>/dev/null
-
-# Garbage delivered from Windows via Samba
-# (donated by Andree Leidenfrost <leidenfrost@dkrz.de>)
-# 300     \033\052\157    cat
-# later changed to 
-# (Bug report #22866: magicfilter: Incorrect magic for Win95/Samba print jobs)
-0       \000\000\000\000\000   cat
-
-# Sun rasterfiles
-0	\x59\xa6\x6a\x95 pipe	/usr/bin/rasttopnm  2>/dev/null
-
-# SGI Imagelib (IRIS RGB) files
-0	\x1\xda		pipe	/usr/bin/sgitopnm  2>/dev/null
-0	\xda\x1		pipe	/usr/bin/sgitopnm  2>/dev/null
-
-# FIG files; reported by Steven P. Hill <sph@uscbu.ih.att.com>
-0	\043FIG		pipe	/usr/bin/fig2dev  -Lps -P -l dummy
-
-#
-# Standard rejects... things we don't want to print
-#
-
-# Various archive formats
-257	ustar\0		reject	Attempted to print a tar file.
-257	"ustar  \0"	reject	Attempted to print a tar file.
-0	07070		reject	Attempted to print a cpio file.
-0	PK\3\4		reject	Attempted to print a zip file.
-20	\xdc\xa7\xc7\xfd reject	Attempted to print a zoo file.
-
-# Binaries (Linux): reject with email message
-0	\013\1d\0	reject	Attempted to print a compiled binary.
-0	\100\1d\0	reject	Attempted to print a compiled binary.
-0	\007\1d\0	reject	Attempted to print a compiled binary.
-0	\314\0d\0	reject	Attempted to print a compiled binary.
-0	\177ELF		reject	Attempted to print an ELF object.
-0	\007\001\0	reject	Attempted to print an object file.
-216	\021\001\0\0	reject	Attempted to print a core dump file.
-0	!<arch>		reject	Attempted to print an archive.
-0	=<ar>		reject	Attempted to print an archive.
-
-# Don't confuse this one with troff!
-0	.snd		reject	Attempted to print Sun/NeXT audio data.
-
-# wacko troff magic
-0	'''		fpipe 	`/usr/bin/grog  -Tps $FILE` 
-
-# Default entry for normal (text) files.  This must be the last entry!
-# =====================================================================
-# Please adjust recode's codepage conversion manually according to your
-# local needs. We apologize for the inconveniences...
-#
-default filter	/etc/magicfilter/escp-text-helper
diff --git a/net-print/magicfilter/files/StylusColor-777-Text-filter b/net-print/magicfilter/files/StylusColor-777-Text-filter
deleted file mode 100644
index fcdaf35aec6b..000000000000
--- a/net-print/magicfilter/files/StylusColor-777-Text-filter
+++ /dev/null
@@ -1,157 +0,0 @@
-#!/usr/sbin/magicfilter
-# vim:set nowrap:
-#
-# Magic filter setup file for the EPSON Stylus Color 777 printer operating
-# at 360 dpi, originally based on StylusColor-800@360dpi-filter.
-# 
-# 8 July 2001 agriffis
-
-# All documents sent to the printer should be prefixed by the magic
-# command and the reset code.  The 'magic command' takes the printer
-# out of the Epson packet mode communication protocol (whatever that
-# is) and enables normal data transfer.  The 'reset code' discards any
-# output, ejects the existing page, and returns all settings to their
-# default.
-0	\000\000\000\033\001@EJL\ 1284.4\n@EJL\ \ \ \ \ \n\033@	cat
-
-# Native printer control codes start with <ESC>, but if this wasn't
-# recognized by the magic above, then the reset code should be
-# prefixed.  Then we pass the document to the printer, cross our
-# fingers and hope for the best.
-#
-# Note that we add a ff/reset on the end just for good measure...
-0	\033	cat \000\000\000\033\001@EJL\ 1284.4\n@EJL\ \ \ \ \ \n\033@ \014\033@
-
-# PostScript, use ghostscript with the gimp-print driver.  This is
-# done as a pipe (instead of a filter, which would go directly to the
-# printer) so that magicfilter can then decide whether or not a reset
-# sequence should be prefixed to the output.
-0	%!		pipe	/usr/bin/gs -q @stc777-text.upp -sOutputFile=- - -c quit 
-0	\004%!		pipe	/usr/bin/gs -q @stc777-text.upp -sOutputFile=- - -c quit 
-
-# PDF
-0	%PDF		fpipe /usr/bin/pdftops  $FILE - 
-
-# TeX DVI
-0	\367\002	fpipe	/usr/bin/dvips  -D 360  -R -q -f 
-
-# compress'd data
-0	\037\235	pipe	/bin/gzip  -cdq 
-
-# packed, gzipped, frozen and SCO LZH data
-0	\037\036	pipe	/bin/gzip  -cdq 
-0	\037\213	pipe	/bin/gzip  -cdq 
-0	\037\236	pipe	/bin/gzip  -cdq 
-0	\037\240	pipe	/bin/gzip  -cdq 
-
-0	BZh		pipe	/usr/bin/bzip2  -cdq 
-
-# troff documents
-0	.\?\?\040	fpipe 	`/usr/bin/grog  -Tps $FILE` 
-0	.\\\"		fpipe 	`/usr/bin/grog  -Tps $FILE` 
-0	'\\\"		fpipe 	`/usr/bin/grog  -Tps $FILE` 
-0	'.\\\"		fpipe 	`/usr/bin/grog  -Tps $FILE` 
-0	\\\"		fpipe 	`/usr/bin/grog  -Tps $FILE` 
-
-# ditroff
-0	"x T ps"	pipe 	/usr/bin/grops 
-0	"x T dvi"	pipe	/usr/bin/grodvi 
-0	"x T ascii"	pipe	/usr/bin/grotty 
-0	"x T latin1"	pipe	/usr/bin/grotty 
-0	"x T lj4"	reject	Cannot print LaserJet 4 ditroff files.
-
-# Portable bit-, grey- and pixmaps
-0	P1\n		pipe 	/usr/bin/pnmtops  -scale 1000 -dpi 360  2>/dev/null 
-0	P2\n		pipe 	/usr/bin/pnmtops  -scale 1000 -dpi 360  2>/dev/null 
-0	P3\n		pipe 	/usr/bin/pnmtops  -scale 1000 -dpi 360  2>/dev/null 
-0	P4\n		pipe 	/usr/bin/pnmtops  -scale 1000 -dpi 360  2>/dev/null 
-0	P5\n		pipe 	/usr/bin/pnmtops  -scale 1000 -dpi 360  2>/dev/null 
-0	P6\n		pipe 	/usr/bin/pnmtops  -scale 1000 -dpi 360  2>/dev/null 
-
-# PNG - Portable network graphics
-0	\x89PNG		pipe	/usr/bin/pngtopnm 
-
-# HP Printer Control Language (PCL) -- assume start with reset code
-0	\033E\033	reject	Cannot print PCL files on this printer. 
-
-# HP Printer Job Language (PJL)
-0	\033%-12345X	reject	Cannot print PJL files on this printer. 
-0	"@PJL "		reject	Cannot print PJL files on this printer. 
-0	@PJL\t		reject	Cannot print PJL files on this printer. 
-0	@PJL\r		reject	Cannot print PJL files on this printer. 
-0	@PJL\n		reject	Cannot print PJL files on this printer. 
-
-# GIF files
-0	GIF87a		pipe	/usr/bin/giftopnm  2>/dev/null
-0	GIF89a		pipe	/usr/bin/giftopnm  2>/dev/null
-
-# JFIF (JPEG) files
-0	\377\330\377\340\?\?JFIF\0	pipe	/usr/bin/djpeg  -pnm
-# Bug 40599
-0	\377\330\377\341\?\?Exif\0	pipe	/usr/bin/djpeg  -pnm
-
-# TIFF files (the last two bytes of the "magic" is really a version number;
-# but the magic is really lame and as far as I have understood the version
-# number has never changed and never will, so we include it.)
-0	MM\0\x2a	fpipe   /usr/bin/tiff2ps  -a $FILE
-0	II\x2a\0	fpipe   /usr/bin/tiff2ps  -a $FILE 
-
-# BMP files (even lousier magic -- Microsoft strikes again!)
-0	BM\?\?\?\?\?\?\?\?\?\?\?\?\x0c	pipe	\
-	/usr/bin/bmptoppm  2>/dev/null
-0	BM\?\?\?\?\?\?\?\?\?\?\?\?\x40	pipe	\
-	/usr/bin/bmptoppm  2>/dev/null
-0	BM\?\?\?\?\?\?\?\?\?\?\?\?\x28	pipe	\
-	/usr/bin/bmptoppm  2>/dev/null
-
-# Garbage delivered from Windows via Samba
-# (donated by Andree Leidenfrost <leidenfrost@dkrz.de>)
-# 300     \033\052\157    cat
-# later changed to 
-# (Bug report #22866: magicfilter: Incorrect magic for Win95/Samba print jobs)
-0       \000\000\000\000\000   cat
-
-# Sun rasterfiles
-0	\x59\xa6\x6a\x95 pipe	/usr/bin/rasttopnm  2>/dev/null
-
-# SGI Imagelib (IRIS RGB) files
-0	\x1\xda		pipe	/usr/bin/sgitopnm  2>/dev/null
-0	\xda\x1		pipe	/usr/bin/sgitopnm  2>/dev/null
-
-# FIG files; reported by Steven P. Hill <sph@uscbu.ih.att.com>
-0	\043FIG		pipe	/usr/bin/fig2dev  -Lps -P -l dummy
-
-#
-# Standard rejects... things we don't want to print
-#
-
-# Various archive formats
-257	ustar\0		reject	Attempted to print a tar file.
-257	"ustar  \0"	reject	Attempted to print a tar file.
-0	07070		reject	Attempted to print a cpio file.
-0	PK\3\4		reject	Attempted to print a zip file.
-20	\xdc\xa7\xc7\xfd reject	Attempted to print a zoo file.
-
-# Binaries (Linux): reject with email message
-0	\013\1d\0	reject	Attempted to print a compiled binary.
-0	\100\1d\0	reject	Attempted to print a compiled binary.
-0	\007\1d\0	reject	Attempted to print a compiled binary.
-0	\314\0d\0	reject	Attempted to print a compiled binary.
-0	\177ELF		reject	Attempted to print an ELF object.
-0	\007\001\0	reject	Attempted to print an object file.
-216	\021\001\0\0	reject	Attempted to print a core dump file.
-0	!<arch>		reject	Attempted to print an archive.
-0	=<ar>		reject	Attempted to print an archive.
-
-# Don't confuse this one with troff!
-0	.snd		reject	Attempted to print Sun/NeXT audio data.
-
-# wacko troff magic
-0	'''		fpipe 	`/usr/bin/grog  -Tps $FILE` 
-
-# Default entry for normal (text) files.  This must be the last entry!
-# =====================================================================
-# Please adjust recode's codepage conversion manually according to your
-# local needs. We apologize for the inconveniences...
-#
-default filter	/etc/magicfilter/escp-text-helper
diff --git a/net-print/magicfilter/files/digest-magicfilter-1.2 b/net-print/magicfilter/files/digest-magicfilter-1.2
deleted file mode 100644
index e60e713ad018..000000000000
--- a/net-print/magicfilter/files/digest-magicfilter-1.2
+++ /dev/null
@@ -1 +0,0 @@
-MD5 dcece221e363ca5dbc79bdd84713c04e magicfilter-1.2.tar.gz
diff --git a/net-print/magicfilter/files/escp-text-helper b/net-print/magicfilter/files/escp-text-helper
deleted file mode 100644
index d314a4bbcfbf..000000000000
--- a/net-print/magicfilter/files/escp-text-helper
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/bin/sh
-
-# Magic command to take the printer out of the Epson packet mode
-# communication protocol (whatever that is) and enable normal data
-# transfer
-printf '\000\000\000\033\001@EJL 1284.4\n@EJL     \n\033@'
-
-# Reset the printer
-printf '\033@'
-
-# Recode standard input to IBM PC characters
-#/usr/bin/recode --silent latin1..ibmpc
-cat
-
-# Eject the page
-printf '\014'
-
-# Finally, reset the printer
-printf '\033@'
diff --git a/net-print/magicfilter/magicfilter-1.2.ebuild b/net-print/magicfilter/magicfilter-1.2.ebuild
deleted file mode 100644
index b858517fa1d0..000000000000
--- a/net-print/magicfilter/magicfilter-1.2.ebuild
+++ /dev/null
@@ -1,53 +0,0 @@
-# Copyright 1999-2000 Gentoo Technologies, Inc.
-# Distributed under the terms of the GNU General Public License, v2 or later
-# Author Aron Griffis <agriffis@gentoo.org>
-# $Header: /var/cvsroot/gentoo-x86/net-print/magicfilter/magicfilter-1.2.ebuild,v 1.1 2001/09/08 14:33:06 agriffis Exp $
-
-A=magicfilter-1.2.tar.gz
-S=${WORKDIR}/${P}
-DESCRIPTION="Customizable, extensible automatic printer filter"
-SRC_URI="ftp://metalab.unc.edu/pub/linux/system/printing/${A}"
-HOMEPAGE="http://www.gnu.org/directory/magicfilter.html"
-
-DEPEND="virtual/glibc"
-RDEPEND="virtual/glibc"
-
-src_unpack() {
-    cd ${WORKDIR}
-    unpack ${A}
-    # This is the patch directly from the Debian package.  It's included
-    # here (instead of fetching from Debian) because their package
-    # revisions will change faster than this ebuild will keep up...
-    cd ${S}
-    patch -p1 < ${FILESDIR}/magicfilter_1.2-39.diff
-}
-
-src_compile() {
-    cd ${S}
-    ./configure --host="${CHOST}" || die
-    emake
-    # Fixup the filters for /usr/sbin/magicfilter
-    cd filters
-    for f in *-filter; do
-	mv $f $f.old
-	( read l; echo '#!/usr/sbin/magicfilter'; cat ) <$f.old >$f
-    done
-}
-
-src_install() {
-    cd ${S}
-    dodir /usr/sbin /usr/share/man/man8 /etc/magicfilter
-    install -m 755 magicfilter ${D}/usr/sbin
-    install -m 755 magicfilter.man ${D}/usr/share/man/man8/magicfilter.8
-    install -m 755 magicfilterconfig ${D}/usr/sbin
-    install -m 644 magicfilterconfig.8 ${D}/usr/share/man
-    cp -p filters/*-filter ${D}/etc/magicfilter
-    # Should these eventually be made into a patch...?
-    install -m 755 ${FILESDIR}/*-filter ${D}/etc/magicfilter
-    install -m 755 ${FILESDIR}/escp-text-helper ${D}/etc/magicfilter
-    gzip -9f ${D}/usr/share/man/*/*
-    gzip -9f filters/README*
-    dodoc README QuickInst TODO debian/copyright 
-    docinto filters
-    dodoc filters/README*
-}