diff options
Diffstat (limited to 'media-gfx/sane-backends')
| -rw-r--r-- | media-gfx/sane-backends/files/saned.initd | 4 | ||||
| -rw-r--r-- | media-gfx/sane-backends/sane-backends-1.0.24-r6.ebuild | 329 | ||||
| -rw-r--r-- | media-gfx/sane-backends/sane-backends-1.0.25-r1.ebuild | 347 |
3 files changed, 678 insertions, 2 deletions
diff --git a/media-gfx/sane-backends/files/saned.initd b/media-gfx/sane-backends/files/saned.initd index dd07f0a9a8bc..3431cb5445d3 100644 --- a/media-gfx/sane-backends/files/saned.initd +++ b/media-gfx/sane-backends/files/saned.initd @@ -1,5 +1,5 @@ -#!/sbin/runscript -# Copyright 1999-2013 Gentoo Foundation +#!/sbin/openrc-run +# Copyright 1999-2016 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 # $Id$ diff --git a/media-gfx/sane-backends/sane-backends-1.0.24-r6.ebuild b/media-gfx/sane-backends/sane-backends-1.0.24-r6.ebuild new file mode 100644 index 000000000000..83a7cb4158c8 --- /dev/null +++ b/media-gfx/sane-backends/sane-backends-1.0.24-r6.ebuild @@ -0,0 +1,329 @@ +# Copyright 1999-2016 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Id$ + +EAPI="5" + +inherit autotools eutils flag-o-matic multilib multilib-minimal udev user toolchain-funcs + +# gphoto and v4l are handled by their usual USE flags. +# The pint backend was disabled because I could not get it to compile. +IUSE_SANE_BACKENDS=" + abaton + agfafocus + apple + artec + artec_eplus48u + as6e + avision + bh + canon + canon630u + canon_dr + canon_pp + cardscan + coolscan + coolscan2 + coolscan3 + dc210 + dc240 + dc25 + dell1600n_net + dmc + epjitsu + epson + epson2 + fujitsu + genesys + gt68xx + hp + hp3500 + hp3900 + hp4200 + hp5400 + hp5590 + hpljm1005 + hpsj5s + hs2p + ibm + kodak + kodakaio + kvs1025 + kvs20xx + kvs40xx + leo + lexmark + ma1509 + magicolor + matsushita + microtek + microtek2 + mustek + mustek_pp + mustek_usb + mustek_usb2 + nec + net + niash + p5 + pie + pixma + plustek + plustek_pp + pnm + qcam + ricoh + rts8891 + s9036 + sceptre + sharp + sm3600 + sm3840 + snapscan + sp15c + st400 + stv680 + tamarack + teco1 + teco2 + teco3 + test + u12 + umax + umax1220u + umax_pp + xerox_mfp" + +IUSE="avahi doc gphoto2 ipv6 threads usb v4l xinetd snmp systemd" + +for backend in ${IUSE_SANE_BACKENDS}; do + case ${backend} in + # Disable backends that require parallel ports as no one has those anymore. + canon_pp|hpsj5s|mustek_pp|\ + pnm) + IUSE+=" -sane_backends_${backend}" + ;; + mustek_usb2|kvs40xx) + IUSE+=" sane_backends_${backend}" + ;; + *) + IUSE+=" +sane_backends_${backend}" + esac +done + +REQUIRED_USE=" + sane_backends_mustek_usb2? ( threads ) + sane_backends_kvs40xx? ( threads ) +" + +DESCRIPTION="Scanner Access Now Easy - Backends" +HOMEPAGE="http://www.sane-project.org/" +SRC_URI="https://alioth.debian.org/frs/download.php/file/3958/${P}.tar.gz" + +LICENSE="GPL-2 public-domain" +SLOT="0" +KEYWORDS="alpha amd64 arm hppa ia64 ppc ppc64 sparc x86 ~x86-fbsd ~amd64-linux ~x86-linux" + +RDEPEND=" + sane_backends_dc210? ( >=virtual/jpeg-0-r2[${MULTILIB_USEDEP}] ) + sane_backends_dc240? ( >=virtual/jpeg-0-r2[${MULTILIB_USEDEP}] ) + sane_backends_dell1600n_net? ( >=virtual/jpeg-0-r2[${MULTILIB_USEDEP}] + >=media-libs/tiff-3.9.7-r1[${MULTILIB_USEDEP}] ) + avahi? ( >=net-dns/avahi-0.6.31-r2[${MULTILIB_USEDEP}] ) + sane_backends_canon_pp? ( >=sys-libs/libieee1284-0.2.11-r3[${MULTILIB_USEDEP}] ) + sane_backends_hpsj5s? ( >=sys-libs/libieee1284-0.2.11-r3[${MULTILIB_USEDEP}] ) + sane_backends_mustek_pp? ( >=sys-libs/libieee1284-0.2.11-r3[${MULTILIB_USEDEP}] ) + usb? ( >=virtual/libusb-1-r1:1[${MULTILIB_USEDEP}] ) + gphoto2? ( + >=media-libs/libgphoto2-2.5.3.1:=[${MULTILIB_USEDEP}] + >=virtual/jpeg-0-r2[${MULTILIB_USEDEP}] + ) + v4l? ( >=media-libs/libv4l-0.9.5[${MULTILIB_USEDEP}] ) + xinetd? ( sys-apps/xinetd ) + snmp? ( net-analyzer/net-snmp ) + systemd? ( sys-apps/systemd:0= ) +" + +DEPEND="${RDEPEND} + v4l? ( sys-kernel/linux-headers ) + doc? ( + virtual/latex-base + dev-texlive/texlive-latexextra + ) + >=sys-apps/sed-4 + + >=virtual/pkgconfig-0-r1[${MULTILIB_USEDEP}]" + +# We now use new syntax construct (SUBSYSTEMS!="usb|usb_device) +RDEPEND="${RDEPEND} + !<sys-fs/udev-114 + abi_x86_32? ( + !<=app-emulation/emul-linux-x86-medialibs-20140508 + !app-emulation/emul-linux-x86-medialibs[-abi_x86_32(-)] + )" + +MULTILIB_CHOST_TOOLS=( + /usr/bin/sane-config +) + +pkg_setup() { + enewgroup scanner + enewuser saned -1 -1 -1 scanner +} + +src_prepare() { + cat >> backend/dll.conf.in <<-EOF + # Add support for the HP-specific backend. Needs net-print/hplip installed. + hpaio + # Add support for the Epson-specific backend. Needs media-gfx/iscan installed. + epkowa + EOF + epatch "${FILESDIR}"/niash_array_index.patch \ + "${FILESDIR}"/${P}-unused-cups.patch \ + "${FILESDIR}"/${P}-automagic_systemd.patch \ + "${FILESDIR}"/${P}-systemd_pkgconfig.patch \ + "${FILESDIR}"/${P}-kodakaio_avahi.patch \ + "${FILESDIR}"/${P}-saned_pidfile_location.patch \ + "${FILESDIR}"/${P}-cross-compile.patch + # Fix for "make check". + sed -i -e 's/sane-backends 1.0.24git/sane-backends 1.0.24/' testsuite/tools/data/html* + AT_NOELIBTOOLIZE=yes eautoreconf +} + +src_configure() { + append-flags -fno-strict-aliasing + + multilib-minimal_src_configure +} + +multilib_src_configure() { + # the blank is intended - an empty string would result in building ALL backends. + local BACKENDS=" " + + use gphoto2 && BACKENDS="gphoto2" + use v4l && BACKENDS="${BACKENDS} v4l" + for backend in ${IUSE_SANE_BACKENDS}; do + if use "sane_backends_${backend}" && [ ${backend} != pnm ]; then + BACKENDS="${BACKENDS} ${backend}" + fi + done + + local myconf=( + $(use_enable usb libusb_1_0) + $(multilib_native_use_with snmp) + ) + + # you can only enable this backend, not disable it... + if use sane_backends_pnm; then + myconf+=( --enable-pnm-backend ) + fi + if ! use doc; then + myconf+=( --disable-latex ) + fi + if use sane_backends_mustek_pp; then + myconf+=( --enable-parport-directio ) + fi + if ! { use sane_backends_canon_pp || use sane_backends_hpsj5s || use sane_backends_mustek_pp; }; then + myconf+=( sane_cv_use_libieee1284=no ) + fi + # if LINGUAS is set, just use the listed and supported localizations. + if [ "${LINGUAS-NoLocalesSet}" != NoLocalesSet ]; then + mkdir -p po || die + echo > po/LINGUAS + for lang in ${LINGUAS}; do + if [ -a "${S}"/po/${lang}.po ]; then + echo ${lang} >> po/LINGUAS + fi + done + fi + + # relative path must be used for tests to work properly + ECONF_SOURCE=../${P} \ + SANEI_JPEG="sanei_jpeg.o" SANEI_JPEG_LO="sanei_jpeg.lo" \ + BACKENDS="${BACKENDS}" \ + econf \ + $(use_with gphoto2) \ + $(multilib_native_use_with systemd) \ + $(use_with v4l) \ + $(use_enable avahi) \ + $(use_enable ipv6) \ + $(use_enable threads pthread) \ + "${myconf[@]}" +} + +multilib_src_compile() { + emake VARTEXFONTS="${T}/fonts" + + if use usb; then + cd tools/hotplug || die + sed -i -e '/^$/d' libsane.usermap || die + fi + + if tc-is-cross-compiler; then + # The build system sucks and doesn't handle this properly. + # https://alioth.debian.org/tracker/index.php?func=detail&aid=314236&group_id=30186&atid=410366 + tc-export_build_env BUILD_CC + cd "${BUILD_DIR}"/tools || die + ${BUILD_CC} ${BUILD_CPPFLAGS} ${BUILD_CFLAGS} -I. -I../include -I"${S}"/include \ + "${S}"/sanei/sanei_config.c "${S}"/sanei/sanei_constrain_value.c \ + "${S}"/sanei/sanei_init_debug.c "${S}"/tools/sane-desc.c -o sane-desc || die + local dirs=( hal hotplug hotplug-ng udev ) + local targets=( + hal/libsane.fdi + hotplug/libsane.usermap + hotplug-ng/libsane.db + udev/libsane.rules + ) + mkdir -p "${dirs[@]}" || die + emake "${targets[@]}" + fi +} + +multilib_src_install() { + emake INSTALL_LOCKPATH="" DESTDIR="${D}" install \ + docdir="${EPREFIX}"/usr/share/doc/${PF} + + if multilib_is_native_abi; then + if use usb; then + insinto /etc/hotplug/usb + doins tools/hotplug/libsane.usermap + fi + + udev_newrules tools/udev/libsane.rules 41-libsane.rules + insinto "/usr/share/pkgconfig" + doins tools/sane-backends.pc + fi +} + +multilib_src_install_all() { + keepdir /var/lib/lock/sane + fowners root:scanner /var/lib/lock/sane + fperms g+w /var/lib/lock/sane + dodir /etc/env.d + + if use usb; then + exeinto /etc/hotplug/usb + doexe tools/hotplug/libusbscanner + newdoc tools/hotplug/README README.hotplug + fi + + dodoc NEWS AUTHORS ChangeLog* PROBLEMS README README.linux + prune_libtool_files --all + if use xinetd; then + insinto /etc/xinetd.d + doins "${FILESDIR}"/saned + fi + + newinitd "${FILESDIR}"/saned.initd saned + newconfd "${FILESDIR}"/saned.confd saned +} + +pkg_postinst() { + if use xinetd; then + elog "If you want remote clients to connect, edit" + elog "/etc/sane.d/saned.conf and /etc/hosts.allow" + fi + + elog "If you are using a USB scanner, add all users who want" + elog "to access your scanner to the \"scanner\" group." +} diff --git a/media-gfx/sane-backends/sane-backends-1.0.25-r1.ebuild b/media-gfx/sane-backends/sane-backends-1.0.25-r1.ebuild new file mode 100644 index 000000000000..0fa014d995e6 --- /dev/null +++ b/media-gfx/sane-backends/sane-backends-1.0.25-r1.ebuild @@ -0,0 +1,347 @@ +# Copyright 1999-2016 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Id$ + +EAPI="5" + +inherit eutils flag-o-matic multilib multilib-minimal udev user toolchain-funcs + +# gphoto and v4l are handled by their usual USE flags. +# The pint backend was disabled because I could not get it to compile. +IUSE_SANE_BACKENDS=" + abaton + agfafocus + apple + artec + artec_eplus48u + as6e + avision + bh + canon + canon630u + canon_dr + canon_pp + cardscan + coolscan + coolscan2 + coolscan3 + dc210 + dc240 + dc25 + dell1600n_net + dmc + epjitsu + epson + epson2 + fujitsu + genesys + gt68xx + hp + hp3500 + hp3900 + hp4200 + hp5400 + hp5590 + hpljm1005 + hpsj5s + hs2p + ibm + kodak + kodakaio + kvs1025 + kvs20xx + kvs40xx + leo + lexmark + ma1509 + magicolor + matsushita + microtek + microtek2 + mustek + mustek_pp + mustek_usb + mustek_usb2 + nec + net + niash + p5 + pie + pixma + plustek + plustek_pp + pnm + qcam + ricoh + rts8891 + s9036 + sceptre + sharp + sm3600 + sm3840 + snapscan + sp15c + st400 + stv680 + tamarack + teco1 + teco2 + teco3 + test + u12 + umax + umax1220u + umax_pp + xerox_mfp" + +IUSE="avahi doc gphoto2 ipv6 nls snmp systemd threads usb v4l xinetd" + +for backend in ${IUSE_SANE_BACKENDS}; do + case ${backend} in + # Disable backends that require parallel ports as no one has those anymore. + canon_pp|hpsj5s|mustek_pp|\ + pnm) + IUSE+=" -sane_backends_${backend}" + ;; + mustek_usb2|kvs40xx) + IUSE+=" sane_backends_${backend}" + ;; + *) + IUSE+=" +sane_backends_${backend}" + esac +done + +REQUIRED_USE=" + sane_backends_mustek_usb2? ( threads ) + sane_backends_kvs40xx? ( threads ) +" + +DESCRIPTION="Scanner Access Now Easy - Backends" +HOMEPAGE="http://www.sane-project.org/" +case ${PV} in +9999) + EGIT_REPO_URI="git://anonscm.debian.org/sane/sane-backends.git" + inherit git-r3 autotools + ;; +*_pre*) + MY_P="${PN}-git${PV#*_pre}" + SRC_URI="http://www.sane-project.org/snapshots/${MY_P}.tar.gz + mirror://gentoo/${MY_P}.tar.gz" + S=${WORKDIR}/${MY_P} + ;; +*) + MY_P=${P} + FRS_ID="4146" + SRC_URI="https://alioth.debian.org/frs/download.php/file/${FRS_ID}/${P}.tar.gz" + ;; +esac + +LICENSE="GPL-2 public-domain" +SLOT="0" +if [[ ${PV} != "9999" ]] ; then + KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~x86-fbsd ~amd64-linux ~x86-linux" +fi + +RDEPEND=" + sane_backends_dc210? ( >=virtual/jpeg-0-r2:0=[${MULTILIB_USEDEP}] ) + sane_backends_dc240? ( >=virtual/jpeg-0-r2:0=[${MULTILIB_USEDEP}] ) + sane_backends_dell1600n_net? ( + >=virtual/jpeg-0-r2:0=[${MULTILIB_USEDEP}] + >=media-libs/tiff-3.9.7-r1:0=[${MULTILIB_USEDEP}] + ) + avahi? ( >=net-dns/avahi-0.6.31-r2[${MULTILIB_USEDEP}] ) + sane_backends_canon_pp? ( >=sys-libs/libieee1284-0.2.11-r3[${MULTILIB_USEDEP}] ) + sane_backends_hpsj5s? ( >=sys-libs/libieee1284-0.2.11-r3[${MULTILIB_USEDEP}] ) + sane_backends_mustek_pp? ( >=sys-libs/libieee1284-0.2.11-r3[${MULTILIB_USEDEP}] ) + usb? ( >=virtual/libusb-1-r1:1=[${MULTILIB_USEDEP}] ) + gphoto2? ( + >=media-libs/libgphoto2-2.5.3.1:=[${MULTILIB_USEDEP}] + >=virtual/jpeg-0-r2:0=[${MULTILIB_USEDEP}] + ) + v4l? ( >=media-libs/libv4l-0.9.5[${MULTILIB_USEDEP}] ) + xinetd? ( sys-apps/xinetd ) + snmp? ( net-analyzer/net-snmp ) + systemd? ( sys-apps/systemd:0= ) +" + +DEPEND="${RDEPEND} + v4l? ( sys-kernel/linux-headers ) + doc? ( + virtual/latex-base + dev-texlive/texlive-latexextra + ) + >=virtual/pkgconfig-0-r1[${MULTILIB_USEDEP}]" + +# We now use new syntax construct (SUBSYSTEMS!="usb|usb_device) +RDEPEND="${RDEPEND} + !<sys-fs/udev-114" + +MULTILIB_CHOST_TOOLS=( + /usr/bin/sane-config +) + +pkg_setup() { + enewgroup scanner + enewuser saned -1 -1 -1 scanner +} + +src_prepare() { + cat >> backend/dll.conf.in <<-EOF + # Add support for the HP-specific backend. Needs net-print/hplip installed. + hpaio + # Add support for the Epson-specific backend. Needs media-gfx/iscan installed. + epkowa + EOF + epatch "${FILESDIR}"/${PN}-1.0.24-saned_pidfile_location.patch + epatch "${FILESDIR}"/${PN}-1.0.25-disable-usb-tests.patch + if [[ ${PV} == "9999" ]] ; then + mv configure.{in,ac} || die + AT_NOELIBTOOLIZE=yes eautoreconf + fi + + # Fix for "make check". Upstream sometimes forgets to update this. + local ver=$(./configure --version | awk '{print $NF; exit 0}') + sed -i \ + -e "/by sane-desc 3.5 from sane-backends/s:sane-backends .*:sane-backends ${ver}:" \ + testsuite/tools/data/html* || die +} + +src_configure() { + append-flags -fno-strict-aliasing + + # if LINGUAS is set, just use the listed and supported localizations. + if [[ ${LINGUAS+set} == "set" ]]; then + mkdir -p po || die + strip-linguas -u po + printf '%s\n' ${LINGUAS} > po/LINGUAS + fi + + multilib-minimal_src_configure +} + +multilib_src_configure() { + # the blank is intended - an empty string would result in building ALL backends. + local BACKENDS=" " + + use gphoto2 && BACKENDS="gphoto2" + use v4l && BACKENDS="${BACKENDS} v4l" + for backend in ${IUSE_SANE_BACKENDS}; do + if use "sane_backends_${backend}" && [ ${backend} != pnm ]; then + BACKENDS="${BACKENDS} ${backend}" + fi + done + + local myconf=( + $(use_enable usb libusb_1_0) + $(multilib_native_use_with snmp) + ) + + # you can only enable this backend, not disable it... + if use sane_backends_pnm; then + myconf+=( --enable-pnm-backend ) + fi + if ! use doc; then + myconf+=( --disable-latex ) + fi + if use sane_backends_mustek_pp; then + myconf+=( --enable-parport-directio ) + fi + if ! { use sane_backends_canon_pp || use sane_backends_hpsj5s || use sane_backends_mustek_pp; }; then + myconf+=( sane_cv_use_libieee1284=no ) + fi + + # relative path must be used for tests to work properly + ECONF_SOURCE=${S} \ + SANEI_JPEG="sanei_jpeg.o" SANEI_JPEG_LO="sanei_jpeg.lo" \ + BACKENDS="${BACKENDS}" \ + econf \ + $(use_with gphoto2) \ + $(multilib_native_use_with systemd) \ + $(use_with v4l) \ + $(use_enable avahi) \ + $(use_enable ipv6) \ + $(use_enable nls translations) \ + $(use_enable threads pthread) \ + "${myconf[@]}" +} + +multilib_src_compile() { + emake VARTEXFONTS="${T}/fonts" + + if tc-is-cross-compiler; then + pushd "${BUILD_DIR}"/tools >/dev/null || die + + # The build system sucks and doesn't handle this properly. + # https://alioth.debian.org/tracker/index.php?func=detail&aid=314236&group_id=30186&atid=410366 + tc-export_build_env BUILD_CC + ${BUILD_CC} ${BUILD_CPPFLAGS} ${BUILD_CFLAGS} ${BUILD_LDFLAGS} \ + -I. -I../include -I"${S}"/include \ + "${S}"/sanei/sanei_config.c "${S}"/sanei/sanei_constrain_value.c \ + "${S}"/sanei/sanei_init_debug.c "${S}"/tools/sane-desc.c -o sane-desc || die + local dirs=( hal hotplug hotplug-ng udev ) + local targets=( + hal/libsane.fdi + hotplug/libsane.usermap + hotplug-ng/libsane.db + udev/libsane.rules + ) + mkdir -p "${dirs[@]}" || die + emake "${targets[@]}" + + popd >/dev/null + fi + + if use usb; then + sed -i -e '/^$/d' \ + tools/hotplug/libsane.usermap || die + fi +} + +multilib_src_install() { + emake INSTALL_LOCKPATH="" DESTDIR="${D}" install \ + docdir="${EPREFIX}"/usr/share/doc/${PF} + + if multilib_is_native_abi; then + if use usb; then + insinto /etc/hotplug/usb + doins tools/hotplug/libsane.usermap + fi + + udev_newrules tools/udev/libsane.rules 41-libsane.rules + insinto "/usr/share/pkgconfig" + doins tools/sane-backends.pc + fi +} + +multilib_src_install_all() { + keepdir /var/lib/lock/sane + fowners root:scanner /var/lib/lock/sane + fperms g+w /var/lib/lock/sane + dodir /etc/env.d + + if use usb; then + exeinto /etc/hotplug/usb + doexe tools/hotplug/libusbscanner + newdoc tools/hotplug/README README.hotplug + fi + + dodoc NEWS AUTHORS ChangeLog* PROBLEMS README README.linux + prune_libtool_files --all + if use xinetd; then + insinto /etc/xinetd.d + doins "${FILESDIR}"/saned + fi + + newinitd "${FILESDIR}"/saned.initd saned + newconfd "${FILESDIR}"/saned.confd saned +} + +pkg_postinst() { + if use xinetd; then + elog "If you want remote clients to connect, edit" + elog "/etc/sane.d/saned.conf and /etc/hosts.allow" + fi + + elog "If you are using a USB scanner, add all users who want" + elog "to access your scanner to the \"scanner\" group." +} |