diff options
| -rw-r--r-- | net-wireless/wpa_supplicant/wpa_supplicant-2.10-r4.ebuild | 480 |
1 files changed, 0 insertions, 480 deletions
diff --git a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r4.ebuild b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r4.ebuild deleted file mode 100644 index c56c16d..0000000 --- a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r4.ebuild +++ /dev/null @@ -1,480 +0,0 @@ -# Copyright 1999-2024 Gentoo Authors -# Distributed under the terms of the GNU General Public License v2 - -EAPI=8 - -inherit desktop linux-info qmake-utils readme.gentoo-r1 systemd toolchain-funcs - -DESCRIPTION="IEEE 802.1X/WPA supplicant for secure wireless transfers" -HOMEPAGE="https://w1.fi/wpa_supplicant/" -LICENSE="|| ( GPL-2 BSD )" - -if [ "${PV}" = "9999" ]; then - inherit git-r3 - EGIT_REPO_URI="https://w1.fi/hostap.git" -else - KEYWORDS="~alpha amd64 arm arm64 ~loong ~mips ppc ppc64 ~riscv ~sparc x86" - SRC_URI="https://w1.fi/releases/${P}.tar.gz" -fi - -SLOT="0" -IUSE="ap broadcom-sta dbus eap-sim eapol-test fasteap +fils +hs2-0 macsec +mbo +mesh p2p privsep ps3 qt5 readline selinux smartcard tdls tkip uncommon-eap-types wep wimax wps" - -# CONFIG_PRIVSEP=y does not have sufficient support for the new driver -# interface functions used for MACsec, so this combination cannot be used -# at least for now. bug #684442 -REQUIRED_USE=" - macsec? ( !privsep ) - privsep? ( !macsec ) - broadcom-sta? ( !fils !mesh !mbo ) -" - -DEPEND=" - >=dev-libs/openssl-1.0.2k:= - dbus? ( sys-apps/dbus ) - kernel_linux? ( - >=dev-libs/libnl-3.2:3 - eap-sim? ( sys-apps/pcsc-lite ) - ) - !kernel_linux? ( net-libs/libpcap ) - qt5? ( - dev-qt/qtcore:5 - dev-qt/qtgui:5 - dev-qt/qtsvg:5 - dev-qt/qtwidgets:5 - ) - readline? ( - sys-libs/ncurses:0= - sys-libs/readline:0= - ) -" -RDEPEND="${DEPEND} - selinux? ( sec-policy/selinux-networkmanager ) - kernel_linux? ( - net-wireless/wireless-regdb - ) -" -BDEPEND="virtual/pkgconfig" - -DOC_CONTENTS=" - If this is a clean installation of wpa_supplicant, you - have to create a configuration file named - /etc/wpa_supplicant/wpa_supplicant.conf - An example configuration file is available for reference in - /usr/share/doc/${PF}/ -" - -S="${WORKDIR}/${P}/${PN}" - -Kconfig_style_config() { - #param 1 is CONFIG_* item - #param 2 is what to set it = to, defaulting in y - CONFIG_PARAM="${CONFIG_HEADER:-CONFIG_}$1" - setting="${2:-y}" - - if [ ! $setting = n ]; then - #first remove any leading "# " if $2 is not n - sed -i "/^# *$CONFIG_PARAM=/s/^# *//" .config || echo "Kconfig_style_config error uncommenting $CONFIG_PARAM" - #set item = $setting (defaulting to y) - if ! sed -i "/^$CONFIG_PARAM\>/s/=.*/=$setting/" .config; then - echo "Kconfig_style_config error setting $CONFIG_PARAM=$setting" - fi - if [ -z "$( grep ^$CONFIG_PARAM= .config )" ] ; then - echo "$CONFIG_PARAM=$setting" >>.config - fi - else - #ensure item commented out - if ! sed -i "/^$CONFIG_PARAM\>/s/$CONFIG_PARAM/# $CONFIG_PARAM/" .config; then - echo "Kconfig_style_config error commenting $CONFIG_PARAM" - fi - fi -} - -src_prepare() { - default - - # net/bpf.h needed for net-libs/libpcap on Gentoo/FreeBSD - sed -i \ - -e "s:\(#include <pcap\.h>\):#include <net/bpf.h>\n\1:" \ - ../src/l2_packet/l2_packet_freebsd.c || die - - # Change configuration to match Gentoo locations (bug #143750) - sed -i \ - -e "s:/usr/lib/opensc:/usr/$(get_libdir):" \ - -e "s:/usr/lib/pkcs11:/usr/$(get_libdir):" \ - wpa_supplicant.conf || die - - # systemd entries to D-Bus service files (bug #372877) - echo 'SystemdService=wpa_supplicant.service' \ - | tee -a dbus/*.service >/dev/null || die - - cd "${WORKDIR}/${P}" || die - - if use wimax; then - # generate-libeap-peer.patch comes before - # fix-undefined-reference-to-random_get_bytes.patch - eapply "${FILESDIR}/${P}-generate-libeap-peer.patch" - - # multilib-strict fix (bug #373685) - sed -e "s/\/usr\/lib/\/usr\/$(get_libdir)/" -i src/eap_peer/Makefile || die - fi - - # bug (320097) - eapply "${FILESDIR}/${PN}-2.6-do-not-call-dbus-functions-with-NULL-path.patch" - - # bug (912315) - eapply "${FILESDIR}/${PN}-2.10-allow-legacy-renegotiation.patch" - eapply "${FILESDIR}/${PN}-2.10-Drop-security-level-to-0-with-OpenSSL-3.0-wh.patch" - - # bug (640492) - sed -i 's#-Werror ##' wpa_supplicant/Makefile || die - - # LibreSSL patch (https://github.com/gentoo/libressl/issues/336) - eapply "${FILESDIR}/${PN}-2.9-libressl.patch" -} - -src_configure() { - # Toolchain setup - tc-export CC PKG_CONFIG - - cp defconfig .config || die - - # Basic setup - Kconfig_style_config CTRL_IFACE - Kconfig_style_config MATCH_IFACE - Kconfig_style_config BACKEND file - Kconfig_style_config IBSS_RSN - Kconfig_style_config IEEE80211W - Kconfig_style_config IEEE80211R - Kconfig_style_config HT_OVERRIDES - Kconfig_style_config VHT_OVERRIDES - Kconfig_style_config OCV - Kconfig_style_config TLSV11 - Kconfig_style_config TLSV12 - Kconfig_style_config GETRANDOM - - # Basic authentication methods - # NOTE: we don't set GPSK or SAKE as they conflict - # with the below options - Kconfig_style_config EAP_GTC - Kconfig_style_config EAP_MD5 - Kconfig_style_config EAP_OTP - Kconfig_style_config EAP_PAX - Kconfig_style_config EAP_PSK - Kconfig_style_config EAP_TLV - Kconfig_style_config EAP_EXE - Kconfig_style_config IEEE8021X_EAPOL - Kconfig_style_config PKCS12 - Kconfig_style_config PEERKEY - Kconfig_style_config EAP_LEAP - Kconfig_style_config EAP_MSCHAPV2 - Kconfig_style_config EAP_PEAP - Kconfig_style_config EAP_TEAP - Kconfig_style_config EAP_TLS - Kconfig_style_config EAP_TTLS - - # Enabling background scanning. - Kconfig_style_config BGSCAN_SIMPLE - Kconfig_style_config BGSCAN_LEARN - - if use dbus ; then - Kconfig_style_config CTRL_IFACE_DBUS - Kconfig_style_config CTRL_IFACE_DBUS_NEW - Kconfig_style_config CTRL_IFACE_DBUS_INTRO - else - Kconfig_style_config CTRL_IFACE_DBUS n - Kconfig_style_config CTRL_IFACE_DBUS_NEW n - Kconfig_style_config CTRL_IFACE_DBUS_INTRO n - fi - - if use eapol-test ; then - Kconfig_style_config EAPOL_TEST - fi - - # Enable support for writing debug info to a log file and syslog. - Kconfig_style_config DEBUG_FILE - Kconfig_style_config DEBUG_SYSLOG - - if use hs2-0 ; then - Kconfig_style_config INTERWORKING - Kconfig_style_config HS20 - fi - - if use mbo ; then - Kconfig_style_config MBO - else - Kconfig_style_config MBO n - fi - - if use uncommon-eap-types; then - Kconfig_style_config EAP_GPSK - Kconfig_style_config EAP_SAKE - Kconfig_style_config EAP_GPSK_SHA256 - Kconfig_style_config EAP_IKEV2 - Kconfig_style_config EAP_EKE - fi - - if use eap-sim ; then - # Smart card authentication - Kconfig_style_config EAP_SIM - Kconfig_style_config EAP_AKA - Kconfig_style_config EAP_AKA_PRIME - Kconfig_style_config PCSC - fi - - if use fasteap ; then - Kconfig_style_config EAP_FAST - fi - - if use readline ; then - # readline/history support for wpa_cli - Kconfig_style_config READLINE - else - #internal line edit mode for wpa_cli - Kconfig_style_config WPA_CLI_EDIT - fi - - Kconfig_style_config TLS openssl - Kconfig_style_config FST - - Kconfig_style_config EAP_PWD - if use fils; then - Kconfig_style_config FILS - Kconfig_style_config FILS_SK_PFS - fi - if use mesh; then - Kconfig_style_config MESH - else - Kconfig_style_config MESH n - fi - # WPA3 - Kconfig_style_config OWE - Kconfig_style_config SAE - Kconfig_style_config DPP - Kconfig_style_config DPP2 - Kconfig_style_config SUITEB192 - Kconfig_style_config SUITEB - - if use wep ; then - Kconfig_style_config WEP - else - Kconfig_style_config WEP n - fi - - # Watch out, reversed logic - if use tkip ; then - Kconfig_style_config NO_TKIP n - else - Kconfig_style_config NO_TKIP - fi - - if use smartcard ; then - Kconfig_style_config SMARTCARD - else - Kconfig_style_config SMARTCARD n - fi - - if use tdls ; then - Kconfig_style_config TDLS - fi - - if use kernel_linux ; then - # Linux specific drivers - Kconfig_style_config DRIVER_ATMEL - Kconfig_style_config DRIVER_HOSTAP - Kconfig_style_config DRIVER_IPW - Kconfig_style_config DRIVER_NL80211 - Kconfig_style_config DRIVER_RALINK - Kconfig_style_config DRIVER_WEXT - Kconfig_style_config DRIVER_WIRED - - if use macsec ; then - #requires something, no idea what - #Kconfig_style_config DRIVER_MACSEC_QCA - Kconfig_style_config DRIVER_MACSEC_LINUX - Kconfig_style_config MACSEC - else - # bug #831369 and bug #684442 - Kconfig_style_config DRIVER_MACSEC_LINUX n - Kconfig_style_config MACSEC n - fi - - if use ps3 ; then - Kconfig_style_config DRIVER_PS3 - fi - fi - - # Wi-Fi Protected Setup (WPS) - if use wps ; then - Kconfig_style_config WPS - Kconfig_style_config WPS2 - # USB Flash Drive - Kconfig_style_config WPS_UFD - # External Registrar - Kconfig_style_config WPS_ER - # Universal Plug'n'Play - Kconfig_style_config WPS_UPNP - # Near Field Communication - Kconfig_style_config WPS_NFC - else - Kconfig_style_config WPS n - Kconfig_style_config WPS2 n - Kconfig_style_config WPS_UFD n - Kconfig_style_config WPS_ER n - Kconfig_style_config WPS_UPNP n - Kconfig_style_config WPS_NFC n - fi - - # Wi-Fi Direct (WiDi) - if use p2p ; then - Kconfig_style_config P2P - Kconfig_style_config WIFI_DISPLAY - else - Kconfig_style_config P2P n - Kconfig_style_config WIFI_DISPLAY n - fi - - # Access Point Mode - if use ap ; then - Kconfig_style_config AP - else - Kconfig_style_config AP n - fi - - # Enable essentials for AP/P2P - if use ap || use p2p ; then - # Enabling HT support (802.11n) - Kconfig_style_config IEEE80211N - - # Enabling VHT support (802.11ac) - Kconfig_style_config IEEE80211AC - fi - - # Enable mitigation against certain attacks against TKIP - Kconfig_style_config DELAYED_MIC_ERROR_REPORT - - if use privsep ; then - Kconfig_style_config PRIVSEP - fi - - if use kernel_linux ; then - Kconfig_style_config LIBNL32 - fi - - if use qt5 ; then - pushd "${S}"/wpa_gui-qt4 > /dev/null || die - eqmake5 wpa_gui.pro - popd > /dev/null || die - fi -} - -src_compile() { - einfo "Building wpa_supplicant" - emake V=1 BINDIR=/usr/sbin - - if use wimax; then - emake -C ../src/eap_peer clean - emake -C ../src/eap_peer - fi - - if use qt5; then - einfo "Building wpa_gui" - emake -C "${S}"/wpa_gui-qt4 - fi - - if use eapol-test ; then - emake eapol_test - fi -} - -src_install() { - dosbin wpa_supplicant - use privsep && dosbin wpa_priv - dobin wpa_cli wpa_passphrase - - newinitd "${FILESDIR}/${PN}-init.d" wpa_supplicant - newconfd "${FILESDIR}/${PN}-conf.d" wpa_supplicant - - exeinto /etc/wpa_supplicant/ - newexe "${FILESDIR}/wpa_cli.sh" wpa_cli.sh - - readme.gentoo_create_doc - dodoc ChangeLog {eap_testing,todo}.txt README{,-WPS} \ - wpa_supplicant.conf - - newdoc .config build-config - - if [ "${PV}" != "9999" ]; then - doman doc/docbook/*.{5,8} - fi - - if use qt5 ; then - into /usr - dobin wpa_gui-qt4/wpa_gui - doicon wpa_gui-qt4/icons/wpa_gui.svg - domenu wpa_gui-qt4/wpa_gui.desktop - else - rm "${ED}"/usr/share/man/man8/wpa_gui.8 - fi - - use wimax && emake DESTDIR="${D}" -C ../src/eap_peer install - - if use dbus ; then - pushd "${S}"/dbus > /dev/null || die - insinto /etc/dbus-1/system.d - newins dbus-wpa_supplicant.conf wpa_supplicant.conf - insinto /usr/share/dbus-1/system-services - doins fi.w1.wpa_supplicant1.service - popd > /dev/null || die - - # This unit relies on dbus support, bug 538600. - systemd_dounit systemd/wpa_supplicant.service - fi - - if use eapol-test ; then - dobin eapol_test - fi - - systemd_dounit "systemd/wpa_supplicant@.service" - systemd_dounit "systemd/wpa_supplicant-nl80211@.service" - systemd_dounit "systemd/wpa_supplicant-wired@.service" -} - -pkg_postinst() { - readme.gentoo_print_elog - - if [[ -e "${EROOT}"/etc/wpa_supplicant.conf ]] ; then - echo - ewarn "WARNING: your old configuration file ${EROOT}/etc/wpa_supplicant.conf" - ewarn "needs to be moved to ${EROOT}/etc/wpa_supplicant/wpa_supplicant.conf" - fi - if ! use wep; then - einfo "WARNING: You are building with WEP support disabled, which is recommended since" - einfo "this protocol is deprecated and insecure. If you still need to connect to" - einfo "WEP-enabled networks, you may turn this flag back on. With this flag off," - einfo "WEP-enabled networks will not even show up as available." - einfo "If your network is missing you may wish to USE=wep" - fi - if ! use tkip; then - ewarn "WARNING: You are building with TKIP support disabled, which is recommended since" - ewarn "this protocol is deprecated and insecure. If you still need to connect to" - ewarn "TKIP-enabled networks, you may turn this flag back on. With this flag off," - ewarn "TKIP-enabled networks, including mixed mode TKIP/AES-CCMP will not even show up" - ewarn "as available. If your network is missing you may wish to USE=tkip" - fi - - # Mea culpa, feel free to remove that after some time --mgorny. - local fn - for fn in wpa_supplicant{,@wlan0}.service; do - if [[ -e "${EROOT}"/etc/systemd/system/network.target.wants/${fn} ]] - then - ebegin "Moving ${fn} to multi-user.target" - mv "${EROOT}"/etc/systemd/system/network.target.wants/${fn} \ - "${EROOT}"/etc/systemd/system/multi-user.target.wants/ || die - eend ${?} \ - "Please try to re-enable ${fn}" - fi - done - - systemd_reenable wpa_supplicant.service -} |