net-print/hpuld: fix 860336,860339

Add missing libusb RDEPEND

Closes: https://bugs.gentoo.org/860336
Closes: https://bugs.gentoo.org/860339
Signed-off-by: Huang Rui <vowstar@gmail.com>

1 files changed, 111 insertions, 0 deletions

diff --git a/net-print/hpuld/hpuld-1.00.39.15.00.23-r1.ebuild b/net-print/hpuld/hpuld-1.00.39.15.00.23-r1.ebuild
new file mode 100644
index 000000000..e94749ba6
--- /dev/null
+++ b/net-print/hpuld/hpuld-1.00.39.15.00.23-r1.ebuild
@@ -0,0 +1,111 @@
+# Copyright 1999-2022 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI="8"
+
+MY_PV="$(ver_rs 4 _)"
+SANE_CONF_DIR="/etc/sane.d"
+
+DESCRIPTION="HP Unified Linux Driver (for samsung hardware)"
+HOMEPAGE="https://support.hp.com"
+
+SRC_URI="
+	https://ftp.ext.hp.com/pub/softlib/software13/printers/LaserJet/M437_M443/ULDLINUX_HewlettPackard_V${MY_PV}.zip
+"
+
+S="${WORKDIR}/uld"
+
+LICENSE="all-rights-reserved"
+SLOT="0"
+KEYWORDS="~amd64 ~arm64 ~mips ~x86"
+
+IUSE="+scanner"
+
+RDEPEND="
+	dev-libs/libusb
+	net-print/cups
+	scanner? (
+		media-gfx/sane-backends
+	)
+"
+
+DEPEND="
+	${RDEPEND}
+"
+
+BDEPEND="
+	app-arch/unzip
+"
+
+# Do not complain about CFLAGS etc since it is binary package
+QA_FLAGS_IGNORED=".*"
+QA_PRESTRIPPED="${QA_FLAGS_IGNORED}"
+
+src_unpack() {
+	default
+
+	for f in ${WORKDIR}/*/*.tar.gz; do
+		tar -zxf "$f" -C ${WORKDIR} || die
+	done
+}
+
+src_install() {
+	export AGREE_EULA="y"
+	export CONTINUE_INSTALL="y"
+	export PAGER="$(which cat)"
+
+	# Fix printer install path
+	sed -i "s#\"/opt\"#\"${D}/opt\"#g" noarch/package_utils || die
+	sed -i "s#\"/opt\"#\"${D}/opt\"#g" noarch/pre_install.sh || die
+	sed -i "s#\"\$INSTDIR_CUPS_BACKENDS\"#\"${D}/\$INSTDIR_CUPS_BACKENDS\"#g" noarch/printer.pkg || die
+	sed -i "s#\"\$INSTDIR_CUPS_FILTERS\"#\"${D}/\$INSTDIR_CUPS_FILTERS\"#g" noarch/printer.pkg || die
+	sed -i "s#\"\$INSTDIR_CUPS_PPD\"#\"${D}/\$INSTDIR_CUPS_PPD\"#g" noarch/printer-script.pkg || die
+	sed -i "s#\"\$INSTDIR_LSB_PPD\"#\"${D}/\$INSTDIR_LSB_PPD\"#g" noarch/printer-script.pkg || die
+	# Not use rpm and dpkg
+	sed -i "s#which rpm#which not_found_command_${PN}#g" noarch/package_utils || die
+	sed -i "s#which dpkg#which not_found_command_${PN}#g" noarch/package_utils || die
+
+	# Fix scanner install path
+	sed -i "s#SANE_DIR=/usr/lib\${LIBSFX}/sane#SANE_DIR=${D}/usr/lib\${LIBSFX}/sane#g" noarch/scanner.pkg || die
+	sed -i "s#/usr/lib/sane#${D}/usr/lib\${LIBSFX}/sane#g" noarch/scanner.pkg || die
+	sed -i "s#/usr/share/locale/\$i/LC_MESSAGES/#${D}//usr/share/locale/\$i/LC_MESSAGES#g" noarch/scanner.pkg || die
+	sed -i "s#\$(sane_config)#${D}/\$(sane_config)#g" noarch/scanner-script.pkg || die
+	sed -i "s#\$(udev_rules)#${D}/\$(udev_rules)#g" noarch/scanner-script.pkg || die
+	sed -i "s#\$(hal_rules)#${D}/\$(hal_rules)#g" noarch/scanner-script.pkg || die
+	sed -i "s#\${USERMAP}#${D}/\${USERMAP}#g" noarch/scanner-script.pkg || die
+	sed -i "s#		trigger_libusbscanner_hotplug##g" noarch/scanner-script.pkg || die
+	mkdir -p "${D}"/etc/hotplug/usb || die
+
+	if use scanner ; then
+		echo "# Add support for the HP-ULD specific backend.  Needs net-print/hpuld installed." > "${S}"/"${PN}".conf || die
+		echo "smfp" > "${S}"/"${PN}".conf || die
+		insinto ${SANE_CONF_DIR}/dll.d
+		doins "${S}"/"${PN}".conf
+
+		sh ./install.sh || die
+		fperms 644 /etc/sane.d/smfp-hewlett-packard.conf
+	else
+		sh ./install-printer.sh || die
+	fi
+}
+
+pkg_postinst() {
+	if use scanner ; then
+		ewarn "If you want to use the scanner,"
+		ewarn "make sure the smfp is listed in ${SANE_CONF_DIR}/dll.d/"${PN}".conf."
+		ewarn "If the geniusvp2 is listed in ${SANE_CONF_DIR}/dll.conf,"
+		ewarn "please comment out it."
+
+		ewarn "You should restart cupsd service after installed $P."
+		ewarn "OpenRC: rc-service cupsd restart"
+		ewarn "systemd: systemctl restart cups.service"
+	fi
+}
+
+pkg_postrm() {
+	if use scanner ; then
+		ewarn "You should restart cupsd service after removed $P."
+		ewarn "OpenRC: rc-service cupsd restart"
+		ewarn "systemd: systemctl restart cups.service"
+	fi
+}