\section{Defined Variables} \label{sec:ebuild-env-vars} The package manager must define the following environment variables. Not all variables are universally meaningful; variables that are not meaningful in a given phase or in global scope may be unset or set to any value. Ebuilds must not attempt to modify any of these variables, unless otherwise specified. Because of their special meanings, these variables may not be preserved consistently across all phases as would normally happen due to environment saving (see section~\ref{sec:ebuild-env-state}). For example, \t{EBUILD_PHASE} is different for every phase, and \t{ROOT} may have changed between the various different \t{pkg_*} phases. Ebuilds must recalculate any variable they derive from an inconsistent variable. \begin{landscape} % Reduce width of text area to make room for margin notes \addtolength{\hsize}{-25mm} \setlength{\linewidth}{\hsize} \setlength{\columnwidth}{\hsize} \addtolength{\footskip}{25mm} \reversemarginpar % Workaround for broken marginnote positioning in lscape environment \addtolength{\marginparsep}{-\textwidth} % FIXME \setlength{\LTleft}{0pt plus 1fil} \setlength{\LTright}{0pt plus 1fil} \begin{longtable}{!{\extracolsep{\fill}} l P{7.5em} l p{35em}} \caption{Defined variables\label{tab:defined-vars}}\\ \toprule \multicolumn{1}{c}{\textbf{Variable}} & \multicolumn{1}{c}{\textbf{Legal in}} & \multicolumn{1}{c}{\textbf{Consistent?}} & \multicolumn{1}{c}{\textbf{Description}} \\ \midrule \endfirsthead \midrule \multicolumn{1}{c}{\textbf{Variable}} & \multicolumn{1}{c}{\textbf{Legal in}} & \multicolumn{1}{c}{\textbf{Consistent?}} & \multicolumn{1}{c}{\textbf{Description}} \\ \midrule \endhead %\midrule \endfoot \bottomrule \endlastfoot \t{P} & All & No\footnote{May change if a package has been updated (see section~\ref{sec:updates-dir}).} & Package name and version, without the revision part. For example, \t{vim-7.0.174}. \\ \t{PF} & All & No\footnotemark[\value{footnote}] & Package name, version, and revision (if any), for example \t{vim-7.0.174-r1}. \\ \t{PN} & All & No\footnotemark[\value{footnote}] & Package name, for example \t{vim}. \\ \t{CATEGORY} & All & No\footnotemark[\value{footnote}] & The package's category, for example \t{app-editors}. \\ \t{PV} & All & Yes & Package version, with no revision. For example \t{7.0.174}. \\ \t{PR} & All & Yes & Package revision, or \t{r0} if none exists. \\ \t{PVR} & All & Yes & Package version and revision (if any), for example \t{7.0.174} or \t{7.0.174-r1}. \\ \t{A} & \t{src_*}, \t{pkg_nofetch} & Yes & All source files available for the package, whitespace separated with no leading or trailing whitespace, and in the order in which the item first appears in a matched component of \t{SRC_URI}\@. Does not include any that are disabled because of USE conditionals. The value is calculated from the base names of each element of the \t{SRC_URI} ebuild metadata variable. \\ \t{AA}\footnote{This variable is generally considered deprecated. However, ebuilds must still assume that the package manager sets it in the EAPIs supporting it. For example, a few configure scripts use this variable to find the \t{aalib} package; ebuilds calling such configure scripts must thus work around this.} & \t{src_*}, \t{pkg_nofetch} & Yes & \featurelabel{aa} All source files that could be available for the package, including any that are disabled in \t{A} because of USE conditionals. The value is calculated from the base names of each element of the \t{SRC_URI} ebuild metadata variable. Only for EAPIs listed in table~\ref{tab:removed-env-vars-table} as supporting \t{AA}. \\ \t{FILESDIR} & \t{src_*}, global~scope\footnote{Not necessarily present when installing from a binary package. Ebuilds must not access the directory in global scope.} & Yes & The full path to a directory where the files from the package's files directory (used for small support files or patches) are available. See section~\ref{sec:package-dirs}. May or may not exist; if a repository provides no support files for the package in question then an ebuild must be prepared for the situation where \t{FILESDIR} points to a non-existent directory. \\ \t{DISTDIR} & \t{src_*}, global~scope\footnotemark[\value{footnote}] & Yes & The full path to the directory in which the files in the \t{A} variable are stored. \\ \t{WORKDIR} & \t{src_*}, global~scope\footnotemark[\value{footnote}] & Yes & The full path to the ebuild's working directory, where all build data should be contained. \\ \t{S} & \t{src_*} & Yes & The full path to the temporary build directory, used by \t{src_compile}, \t{src_install} etc. Defaults to \t{\$\{WORKDIR\}/\$\{P\}}. May be modified by ebuilds. If \t{S} is assigned in the global scope of an ebuild, then the restrictions of section~\ref{sec:ebuild-env-state} for global variables apply. \\ \t{PORTDIR} & \t{src_*} & No & \featurelabel{portdir} The full path to the master repository's base directory. Only for EAPIs listed in table~\ref{tab:removed-env-vars-table} as supporting \t{PORTDIR}. \\ \t{ECLASSDIR} & \t{src_*} & No & \featurelabel{eclassdir} The full path to the master repository's eclass directory. Only for EAPIs listed in table~\ref{tab:removed-env-vars-table} as supporting \t{ECLASSDIR}. \\ \t{ROOT} & \t{pkg_*} & No & The absolute path to the root directory into which the package is to be merged. Phases which run with full filesystem access must not touch any files outside of the directory given in \t{ROOT}\@. Also of note is that in a cross-compiling environment, binaries inside of \t{ROOT} will not be executable on the build machine, so ebuilds must not call them. The presence of a trailing slash is EAPI dependent as listed in table~\ref{tab:trailing-slash}. \\ \t{EROOT} & \t{pkg_*} & No & Contains the concatenation of the paths in the \t{ROOT} and \t{EPREFIX} variables, for convenience. See also the \t{EPREFIX} variable. Only for EAPIs listed in table~\ref{tab:offset-env-vars-table} as supporting \t{EROOT}\@. The presence of a trailing slash is EAPI dependent as listed in table~\ref{tab:trailing-slash}. \\ \t{SYSROOT} & \t{src_*}, \t{pkg_setup}\footnote{Not necessarily present when installing from a binary package.} & No & \featurelabel{sysroot} The absolute path to the root directory containing build dependencies satisfied by \t{DEPEND}\@. Only for EAPIs listed in table~\ref{tab:added-env-vars-table} as supporting \t{SYSROOT}. \\ \t{ESYSROOT} & \t{src_*}, \t{pkg_setup}\footnotemark[\value{footnote}] & No & Contains the concatenation of the \t{SYSROOT} path and applicable prefix value, as determined by table~\ref{tab:depend-prefix}. Only for EAPIs listed in table~\ref{tab:offset-env-vars-table} as supporting \t{ESYSROOT}. \\ \t{BROOT} & \t{src_*}, \t{pkg_setup},\footnotemark[\value{footnote}] \t{pkg_preinst}, \t{pkg_postinst}, \t{pkg_prerm}, \t{pkg_postrm}\footnote{Legal in \t{pkg_*inst} and \t{pkg_*rm} only for EAPIs listed in table~\ref{tab:depend-table} as supporting \t{IDEPEND}.} & No & \featurelabel{broot} The absolute path to the root directory containing build dependencies satisfied by \t{BDEPEND} and \t{IDEPEND}, typically executable build tools. This includes any applicable offset prefix. Only for EAPIs listed in table~\ref{tab:added-env-vars-table} as supporting \t{BROOT}. \\ \t{T} & All & Partially\footnote{Consistent and preserved across a single connected sequence of install or uninstall phases, but not between install and uninstall. When reinstalling a package, this variable must have different values for the install and the replacement.} & The full path to a temporary directory for use by the ebuild. \\ \t{TMPDIR} & All & Partially\footnotemark[\value{footnote}] & Must be set to the location of a usable temporary directory, for any applications called by an ebuild. Must not be used by ebuilds directly; see \t{T} above. \\ \t{HOME} & All & Partially\footnotemark[\value{footnote}] & The full path to an appropriate temporary directory for use by any programs invoked by the ebuild that may read or modify the home directory. \\ \t{EPREFIX} & All & Yes & The normalised offset-prefix path of an offset installation. When \t{EPREFIX} is not set in the calling environment, \t{EPREFIX} defaults to the built-in offset-prefix that was set during installation of the package manager. When a different \t{EPREFIX} value than the built-in value is set in the calling environment, a cross-prefix build is performed where using the existing utilities, a package is built for the given \t{EPREFIX}, akin to \t{ROOT}\@. See also section~\ref{sec:offset-vars}. Only for EAPIs listed in table~\ref{tab:offset-env-vars-table} as supporting \t{EPREFIX}. \\ \t{D} & \t{src_*} & Yes & Contains the full path to the image directory into which the package should be installed. Ebuilds must not attempt to access the directory in \t{src_*} phases other than \t{src_install}. The presence of a trailing slash is EAPI dependent as listed in table~\ref{tab:trailing-slash}. \\ \t{D} (continued) & \t{pkg_preinst} & No\footnote{May not necessarily have the same value that it had in the \t{src_*} phases.} & Contains the full path to the image directory of the package about to be merged. The presence of a trailing slash is EAPI dependent as listed in table~\ref{tab:trailing-slash}. \\ \t{ED} & \t{src_*}, \t{pkg_preinst} & See \t{D} & Contains the concatenation of the paths in the \t{D} and \t{EPREFIX} variables, for convenience. See also the \t{EPREFIX} variable. Only for EAPIs listed in table~\ref{tab:offset-env-vars-table} as supporting \t{ED}\@. Ebuilds must not attempt to access the directory in \t{src_*} phases other than \t{src_install}. The presence of a trailing slash is EAPI dependent as listed in table~\ref{tab:trailing-slash}. \\ \t{DESTTREE} & \t{src_install} & No & \featurelabel{desttree} Controls the location where \t{dobin}, \t{dolib}, \t{domo}, and \t{dosbin} install things. Only for EAPIs listed in table~\ref{tab:removed-env-vars-table} as supporting \t{DESTTREE}. In all other EAPIs, this is retained as a conceptual variable not exported to the ebuild environment. \\ \t{INSDESTTREE} & \t{src_install} & No & \featurelabel{insdesttree} Controls the location where \t{doins} installs things. Only for EAPIs listed in table~\ref{tab:removed-env-vars-table} as supporting \t{INSDESTTREE}. In all other EAPIs, this is retained as a conceptual variable not exported to the ebuild environment. \\ \t{USE} & All & Yes & A whitespace-delimited list of all active USE flags for this ebuild. See section~\ref{sec:use-iuse-handling} for details. \\ \t{EBUILD_PHASE} & \t{src_*}, \t{pkg_*} & No & Takes one of the values \t{config}, \t{setup}, \t{nofetch}, \t{unpack}, \t{prepare}, \t{configure}, \t{compile}, \t{test}, \t{install}, \t{preinst}, \t{postinst}, \t{prerm}, \t{postrm}, \t{info}, \t{pretend} according to the top level ebuild function that was executed by the package manager. Behaviour is unspecified when the ebuild is being sourced for other (e.\,g.\ metadata or QA) purposes. \\ \t{EBUILD_PHASE_FUNC} & \t{src_*}, \t{pkg_*} & No & \featurelabel{ebuild-phase-func} Takes one of the values \t{pkg_config}, \t{pkg_setup}, \t{pkg_nofetch}, \t{src_unpack}, \t{src_prepare}, \t{src_configure}, \t{src_compile}, \t{src_test}, \t{src_install}, \t{pkg_preinst}, \t{pkg_postinst}, \t{pkg_prerm}, \t{pkg_postrm}, \t{pkg_info}, \t{pkg_pretend} according to the top level ebuild function that was executed by the package manager. Behaviour is unspecified when the ebuild is being sourced for other (e.\,g.\ metadata or QA) purposes. Only for EAPIs listed in table~\ref{tab:added-env-vars-table} as supporting \t{EBUILD_PHASE_FUNC}. \\ \t{KV} & All & Yes & \featurelabel{kv} The version of the running kernel at the time the ebuild was first executed, as returned by the \t{uname~-r} command or equivalent. May be modified by ebuilds. Only for EAPIs listed in table~\ref{tab:removed-env-vars-table} as supporting \t{KV}. \\ \t{MERGE_TYPE} & \t{pkg_*} & No & \featurelabel{merge-type} The type of package that is being merged. Possible values are: \t{source} if building and installing a package from source, \t{binary} if installing a binary package, and \t{buildonly} if building a binary package without installing it. Only for EAPIs listed in table~\ref{tab:added-env-vars-table} as supporting \t{MERGE_TYPE}. \\ \t{REPLACING_VERSIONS} & \t{pkg_preinst}, \t{pkg_postinst} (\t{pkg_pretend}, \t{pkg_setup}) & Yes & A list of all versions of this package (including revision, if specified), whitespace separated with no leading or trailing whitespace, that are being replaced (uninstalled or overwritten) as a result of this install. See section~\ref{sec:replacing-versions}, especially for the phases in which the variable is legal. Only for EAPIs listed in table~\ref{tab:added-env-vars-table} as supporting \t{REPLACING_VERSIONS}. \\ \t{REPLACED_BY_VERSION} & \t{pkg_prerm}, \t{pkg_postrm} & Yes & The single version of this package (including revision, if specified) that is replacing us, if we are being uninstalled as part of an install, or an empty string otherwise. See section~\ref{sec:replacing-versions}. Only for EAPIs listed in table~\ref{tab:added-env-vars-table} as supporting \t{REPLACED_BY_VERSION}. \\ \end{longtable} \end{landscape} \ChangeWhenAddingAnEAPI{8} \begin{centertable}{EAPIs supporting various added env variables} \label{tab:added-env-vars-table} \begin{tabular}{lllllll} \toprule \multicolumn{1}{c}{\textbf{EAPI}} & \multicolumn{1}{P{3.25em}}{\textbf{\t{MERGE_TYPE}?}} & \multicolumn{1}{P{5.25em}}{\textbf{\t{REPLACING_VERSIONS}?}} & \multicolumn{1}{P{5.75em}}{\textbf{\t{REPLACED_BY_VERSION}?}} & \multicolumn{1}{P{5.75em}}{\textbf{\t{EBUILD_PHASE_FUNC}?}} & \multicolumn{1}{c}{\textbf{\t{SYSROOT}?}} & \multicolumn{1}{c}{\textbf{\t{BROOT}?}} \\ \midrule 0, 1, 2, 3 & No & No & No & No & No & No \\ 4 & Yes & Yes & Yes & No & No & No \\ 5, 6 & Yes & Yes & Yes & Yes & No & No \\ 7, 8 & Yes & Yes & Yes & Yes & Yes & Yes \\ \bottomrule \end{tabular} \end{centertable} \ChangeWhenAddingAnEAPI{8} \begin{centertable}{EAPIs supporting various removed env variables} \label{tab:removed-env-vars-table} \begin{tabular}{lllllll} \toprule \multicolumn{1}{c}{\textbf{EAPI}} & \multicolumn{1}{c}{\textbf{\t{AA}?}} & \multicolumn{1}{c}{\textbf{\t{KV}?}} & \multicolumn{1}{c}{\textbf{\t{PORTDIR}?}} & \multicolumn{1}{c}{\textbf{\t{ECLASSDIR}?}} & \multicolumn{1}{c}{\textbf{\t{DESTTREE}?}} & \multicolumn{1}{c}{\textbf{\t{INSDESTTREE}?}} \\ \midrule 0, 1, 2, 3 & Yes & Yes & Yes & Yes & Yes & Yes \\ 4, 5, 6 & No & No & Yes & Yes & Yes & Yes \\ 7, 8 & No & No & No & No & No & No \\ \bottomrule \end{tabular} \end{centertable} \ChangeWhenAddingAnEAPI{8} \begin{centertable}{EAPIs supporting offset-prefix env variables} \label{tab:offset-env-vars-table} \begin{tabular}{lllll} \toprule \multicolumn{1}{c}{\textbf{EAPI}} & \multicolumn{1}{c}{\textbf{\t{EPREFIX}?}} & \multicolumn{1}{c}{\textbf{\t{EROOT}?}} & \multicolumn{1}{c}{\textbf{\t{ED}?}} & \multicolumn{1}{c}{\textbf{\t{ESYSROOT}?}} \\ \midrule 0, 1, 2 & No & No & No & No \\ 3, 4, 5, 6 & Yes & Yes & Yes & No \\ 7, 8 & Yes & Yes & Yes & Yes \\ \bottomrule \end{tabular} \end{centertable} Except where otherwise noted, all variables set in the active profiles' \t{make.defaults} files must be exported to the ebuild environment. \t{CHOST}, \t{CBUILD} and \t{CTARGET}, if not set by profiles, must contain either an appropriate machine tuple (the definition of appropriate is beyond the scope of this specification) or be unset. \t{PATH} must be initialized by the package manager to a ``usable'' default. The exact value here is left up to interpretation, but it should include the equivalent ``sbin'' and ``bin'' and any package manager specific directories. \t{GZIP}, \t{BZIP}, \t{BZIP2}, \t{CDPATH}, \t{GREP_OPTIONS}, \t{GREP_COLOR} and \t{GLOBIGNORE} must not be set. \featurelabel{env-unset} In addition, any variable whose name appears in the \t{ENV_UNSET} variable must be unset, for EAPIs listed in table~\ref{tab:profile-env-unset} as supporting \t{ENV_UNSET}. \featurelabel{locale-settings} The package manager must ensure that the \t{LC_CTYPE} and \t{LC_COLLATE} locale categories are equivalent to the POSIX locale, as far as characters in the ASCII range (U+0000 to U+007F) are concerned. Only for EAPIs listed in such a manner in table~\ref{tab:locale-settings}. \ChangeWhenAddingAnEAPI{8} \begin{centertable}{Locale settings for EAPIs} \label{tab:locale-settings} \begin{tabular}{ll} \toprule \multicolumn{1}{c}{\textbf{EAPI}} & \multicolumn{1}{c}{\textbf{Sane \t{LC_CTYPE} and \t{LC_COLLATE}?}} \\ \midrule 0, 1, 2, 3, 4, 5 & Undefined \\ 6, 7, 8 & Yes \\ \bottomrule \end{tabular} \end{centertable} \subsection{USE and IUSE handling} \label{sec:use-iuse-handling} This section discusses the handling of four variables: \nobreakpar \begin{description} \item[IUSE] is the variable calculated from the \t{IUSE} values defined in ebuilds and eclasses. \item[IUSE_REFERENCEABLE] is a variable calculated from \t{IUSE} and a variety of other sources described below. It is purely a conceptual variable; it is not exported to the ebuild environment. Values in \t{IUSE_REFERENCEABLE} may legally be used in queries from other packages about an ebuild's state (for example, for use dependencies). \item[IUSE_EFFECTIVE] is another conceptual, unexported variable. Values in \t{IUSE_EFFECTIVE} are those which an ebuild may legally use in queries about itself (for example, for the \t{use} function, and for use in dependency specification conditional blocks). \item[USE] is a variable calculated by the package manager and exported to the ebuild environment. \end{description} In all cases, the values of \t{IUSE_REFERENCEABLE} and \t{IUSE_EFFECTIVE} are undefined during metadata generation. For EAPIs listed in table~\ref{tab:profile-iuse-injection-table} as not supporting profile defined \t{IUSE} injection, \t{IUSE_REFERENCEABLE} is equal to the calculated \t{IUSE} value, and \t{IUSE_EFFECTIVE} contains the following values: \begin{compactitem} \item All values in the calculated \t{IUSE} value. \item All possible values for the \t{ARCH} variable. \item All legal use flag names whose name starts with the lowercase equivalent of any value in the profile \t{USE_EXPAND} variable followed by an underscore. \end{compactitem} \featurelabel{profile-iuse-inject} For EAPIs listed in table~\ref{tab:profile-iuse-injection-table} as supporting profile defined \t{IUSE} injection, \t{IUSE_REFERENCEABLE} and \t{IUSE_EFFECTIVE} are equal and contain the following values: \begin{compactitem} \item All values in the calculated \t{IUSE} value. \item All values in the profile \t{IUSE_IMPLICIT} variable. \item All values in the profile variable named \t{USE_EXPAND_VALUES_\$\{v\}}, where \t{\$\{v\}} is any value in the intersection of the profile \t{USE_EXPAND_UNPREFIXED} and \t{USE_EXPAND_IMPLICIT} variables. \item All values for \t{\$\{lower_v\}_\$\{x\}}, where \t{\$\{x\}} is all values in the profile variable named \t{USE_EXPAND_VALUES_\$\{v\}}, where \t{\$\{v\}} is any value in the intersection of the profile \t{USE_EXPAND} and \t{USE_EXPAND_IMPLICIT} variables and \t{\$\{lower_v\}} is the lowercase equivalent of \t{\$\{v\}}. \end{compactitem} The \t{USE} variable is set by the package manager. For each value in \t{IUSE_EFFECTIVE}, \t{USE} shall contain that value if the flag is to be enabled for the ebuild in question, and shall not contain that value if it is to be disabled. In EAPIs listed in table~\ref{tab:profile-iuse-injection-table} as not supporting profile defined \t{IUSE} injection, \t{USE} may contain other flag names that are not relevant for the ebuild. For EAPIs listed in table~\ref{tab:profile-iuse-injection-table} as supporting profile defined \t{IUSE} injection, the variables named in \t{USE_EXPAND} and \t{USE_EXPAND_UNPREFIXED} shall have their profile-provided values reduced to contain only those values that are present in \t{IUSE_EFFECTIVE}. For EAPIs listed in table~\ref{tab:profile-iuse-injection-table} as supporting profile defined \t{IUSE} injection, the package manager must save the calculated value of \t{IUSE_EFFECTIVE} when installing a package. Details are beyond the scope of this specification. \subsection{REPLACING_VERSIONS and REPLACED_BY_VERSION} \label{sec:replacing-versions} \featurelabel{replace-version-vars} In EAPIs listed in table~\ref{tab:added-env-vars-table} as supporting it, the \t{REPLACING_VERSIONS} variable shall be defined in \t{pkg_preinst} and \t{pkg_postinst}. In addition, it \emph{may} be defined in \t{pkg_pretend} and \t{pkg_setup}, although ebuild authors should take care to handle binary package creation and installation correctly when using it in these phases. \t{REPLACING_VERSIONS} is a list, not a single optional value, to handle pathological cases such as installing \t{foo-2:2} to replace \t{foo-2:1} and \t{foo-3:2}. In EAPIs listed in table~\ref{tab:added-env-vars-table} as supporting it, the \t{REPLACED_BY_VERSION} variable shall be defined in \t{pkg_prerm} and \t{pkg_postrm}. It shall contain at most one value. \subsection{Offset-prefix variables} \label{sec:offset-vars} \ChangeWhenAddingAnEAPI{8} \begin{centertable}{EAPIs supporting offset-prefix} \label{tab:offset-support-table} \begin{tabular}{ll} \toprule \multicolumn{1}{c}{\textbf{EAPI}} & \multicolumn{1}{c}{\textbf{Supports offset-prefix?}}\\ \midrule 0, 1, 2 & No \\ 3, 4, 5, 6, 7, 8 & Yes \\ \bottomrule \end{tabular} \end{centertable} \featurelabel{offset-prefix-vars} Table~\ref{tab:offset-support-table} lists the EAPIs which support offset-prefix installations. This support was initially added in EAPI 3, in the form of three extra variables. Two of these, \t{EROOT} and \t{ED}, are convenience variables using the variable \t{EPREFIX}\@. In EAPIs that do not support an offset-prefix, the installation offset is hardwired to \t{/usr}. In offset-prefix supporting EAPIs the installation offset is set as \t{\$\{EPREFIX\}/usr} and hence can be adjusted using the variable \t{EPREFIX}\@. Note that the behaviour of offset-prefix aware and agnostic is the same when \t{EPREFIX} is set to the empty string in offset-prefix aware EAPIs. The latter do have the variables \t{ED} and \t{EROOT} properly set, though. \subsection{Path variables and trailing slash} \label{sec:trailing-slash} Unless specified otherwise, the paths provided through package manager variables do not end with a trailing slash. Consequently, the system root directory will be represented by the empty string. A few exceptions to this rule are listed in table~\ref{tab:trailing-slash} along with applicable EAPIs. For EAPIs where those variables are defined to always end with a trailing slash, the package manager guarantees that a trailing slash will always be appended to the path in question. If the path specifies the system root directory, it will consist of a single slash (\t{/}). \featurelabel{trailing-slash} For EAPIs where those variables are defined to never end with a trailing slash, the package manager guarantees that a trailing slash will never be present. If the path specifies the system root directory, it will be empty. \ChangeWhenAddingAnEAPI{8} \begin{centertable}{Variables that always or never end with a trailing slash} \label{tab:trailing-slash} \begin{tabular}{lll} \toprule \multicolumn{1}{c}{\textbf{EAPI}} & \multicolumn{2}{c}{\textbf{Ends with a trailing slash?}} \\ & \t{ROOT}, \t{EROOT} & \t{D}, \t{ED} \\ \midrule 0, 1, 2, 3, 4, 5, 6 & always & always \\ 7, 8 & never & never \\ \bottomrule \end{tabular} \end{centertable} % vim: set filetype=tex fileencoding=utf8 et tw=100 spell spelllang=en : %%% Local Variables: %%% mode: latex %%% TeX-master: "pms" %%% LaTeX-indent-level: 4 %%% LaTeX-item-indent: 0 %%% TeX-brace-indent-level: 4 %%% fill-column: 100 %%% End: