diff options
40 files changed, 456 insertions, 1242 deletions
diff --git a/ChangeLog b/ChangeLog index 134df097543..e9a5611c5e7 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,3 +1,8 @@ +2021-02-09 Alan Modra <amodra@gmail.com> + + * configure.ac: Delete arm*-*-symbianelf* entry. + * configure: Regenerate. + 2021-01-26 Nick Alcock <nick.alcock@oracle.com> * Makefile.def: Add install-libctf dependency to install-ld. diff --git a/bfd/ChangeLog b/bfd/ChangeLog index ba608e1e77f..08e6790870b 100644 --- a/bfd/ChangeLog +++ b/bfd/ChangeLog @@ -1,3 +1,12 @@ +2021-02-09 Alan Modra <amodra@gmail.com> + + * config.bfd (arm*-*-symbianelf*): Move from obsolete to removed. + * configure.ac: Delete symbian entries. + * elf-bfd.h (enum elf_target_os): Delete is_symbian. + * elf32-arm.c: Remove symbian support. Formatting. + * targets.c: Delete symbian entries. + * configure: Regenerate. + 2021-02-04 H.J. Lu <hongjiu.lu@intel.com> PR ld/19609 diff --git a/bfd/config.bfd b/bfd/config.bfd index 6408da3a3a2..7783dca311a 100644 --- a/bfd/config.bfd +++ b/bfd/config.bfd @@ -53,7 +53,6 @@ case $targ in echo "*** Use or1k-*-elf or or1k-*-linux as the target instead" >&2 exit 1 ;; - arm*-*-symbianelf* | \ ia64*-*-* | \ null) if test "x$enable_obsolete" != xyes; then @@ -85,6 +84,7 @@ case $targ in arm-*-openbsd* | \ arm-*-oabi | \ arm-*-riscix* | \ + arm*-*-symbianelf* | \ arm-epoc-pe* | \ c30-*-*aout* | tic30-*-*aout* | \ cr16c-*-* | \ @@ -394,10 +394,6 @@ case "${targ}" in targ_defvec=arm_elf32_vxworks_le_vec targ_selvecs=arm_elf32_vxworks_be_vec ;; - arm*-*-symbianelf*) - targ_defvec=arm_elf32_symbian_le_vec - targ_selvecs=arm_elf32_symbian_be_vec - ;; arm9e-*-elf) targ_defvec=arm_elf32_le_vec targ_selvecs=arm_elf32_be_vec diff --git a/bfd/configure b/bfd/configure index ed328de6e9f..5a7e88eccef 100755 --- a/bfd/configure +++ b/bfd/configure @@ -14781,8 +14781,6 @@ do arm_elf32_fdpic_le_vec) tb="$tb elf32-arm.lo elf32.lo elf-nacl.lo elf-vxworks.lo $elf" ;; arm_elf32_nacl_be_vec) tb="$tb elf32-arm.lo elf32.lo elf-nacl.lo elf-vxworks.lo $elf" ;; arm_elf32_nacl_le_vec) tb="$tb elf32-arm.lo elf32.lo elf-nacl.lo elf-vxworks.lo $elf" ;; - arm_elf32_symbian_be_vec) tb="$tb elf32-arm.lo elf32.lo elf-nacl.lo elf-vxworks.lo $elf" ;; - arm_elf32_symbian_le_vec) tb="$tb elf32-arm.lo elf32.lo elf-nacl.lo elf-vxworks.lo $elf" ;; arm_elf32_vxworks_be_vec) tb="$tb elf32-arm.lo elf32.lo elf-nacl.lo elf-vxworks.lo $elf" ;; arm_elf32_vxworks_le_vec) tb="$tb elf32-arm.lo elf32.lo elf-nacl.lo elf-vxworks.lo $elf" ;; arm_pe_be_vec) tb="$tb pe-arm.lo peigen.lo $coff" ;; diff --git a/bfd/configure.ac b/bfd/configure.ac index 102a22171f6..fae4ea21754 100644 --- a/bfd/configure.ac +++ b/bfd/configure.ac @@ -466,8 +466,6 @@ do arm_elf32_fdpic_le_vec) tb="$tb elf32-arm.lo elf32.lo elf-nacl.lo elf-vxworks.lo $elf" ;; arm_elf32_nacl_be_vec) tb="$tb elf32-arm.lo elf32.lo elf-nacl.lo elf-vxworks.lo $elf" ;; arm_elf32_nacl_le_vec) tb="$tb elf32-arm.lo elf32.lo elf-nacl.lo elf-vxworks.lo $elf" ;; - arm_elf32_symbian_be_vec) tb="$tb elf32-arm.lo elf32.lo elf-nacl.lo elf-vxworks.lo $elf" ;; - arm_elf32_symbian_le_vec) tb="$tb elf32-arm.lo elf32.lo elf-nacl.lo elf-vxworks.lo $elf" ;; arm_elf32_vxworks_be_vec) tb="$tb elf32-arm.lo elf32.lo elf-nacl.lo elf-vxworks.lo $elf" ;; arm_elf32_vxworks_le_vec) tb="$tb elf32-arm.lo elf32.lo elf-nacl.lo elf-vxworks.lo $elf" ;; arm_pe_be_vec) tb="$tb pe-arm.lo peigen.lo $coff" ;; diff --git a/bfd/elf-bfd.h b/bfd/elf-bfd.h index 994f15e48cf..4b79ee8eb62 100644 --- a/bfd/elf-bfd.h +++ b/bfd/elf-bfd.h @@ -543,7 +543,6 @@ struct bfd_link_needed_list enum elf_target_os { is_normal, - is_symbian, /* Symbian OS. */ is_solaris, /* Solaris. */ is_vxworks, /* VxWorks. */ is_nacl /* Native Client. */ diff --git a/bfd/elf32-arm.c b/bfd/elf32-arm.c index d23f6c07e08..d3b412c710a 100644 --- a/bfd/elf32-arm.c +++ b/bfd/elf32-arm.c @@ -2497,14 +2497,6 @@ static const bfd_vma elf32_arm_plt_thumb_stub [] = 0xe7fd /* b .-2 */ }; -/* The entries in a PLT when using a DLL-based target with multiple - address spaces. */ -static const bfd_vma elf32_arm_symbian_plt_entry [] = -{ - 0xe51ff004, /* ldr pc, [pc, #-4] */ - 0x00000000, /* dcd R_ARM_GLOB_DAT(X) */ -}; - /* The first entry in a procedure linkage table looks like this. It is set up so that any shared library function that is called before the relocation has been set up calls the dynamic @@ -3794,10 +3786,6 @@ create_got_section (bfd *dynobj, struct bfd_link_info *info) if (htab == NULL) return FALSE; - /* BPABI objects never have a GOT, or associated sections. */ - if (htab->root.target_os == is_symbian) - return TRUE; - if (! _bfd_elf_create_got_section (dynobj, info)) return FALSE; @@ -9558,20 +9546,17 @@ elf32_arm_allocate_plt_entry (struct bfd_link_info *info, root_plt->offset = splt->size; splt->size += htab->plt_entry_size; - if (htab->root.target_os != is_symbian) - { - /* We also need to make an entry in the .got.plt section, which - will be placed in the .got section by the linker script. */ - if (is_iplt_entry) - arm_plt->got_offset = sgotplt->size; - else - arm_plt->got_offset = sgotplt->size - 8 * htab->num_tls_desc; - if (htab->fdpic_p) - /* Function descriptor takes 64 bits in GOT. */ - sgotplt->size += 8; - else - sgotplt->size += 4; - } + /* We also need to make an entry in the .got.plt section, which + will be placed in the .got section by the linker script. */ + if (is_iplt_entry) + arm_plt->got_offset = sgotplt->size; + else + arm_plt->got_offset = sgotplt->size - 8 * htab->num_tls_desc; + if (htab->fdpic_p) + /* Function descriptor takes 64 bits in GOT. */ + sgotplt->size += 8; + else + sgotplt->size += 4; } static bfd_vma @@ -9610,7 +9595,6 @@ elf32_arm_populate_plt_entry (bfd *output_bfd, struct bfd_link_info *info, bfd_byte *loc; bfd_vma plt_index; Elf_Internal_Rela rel; - bfd_vma plt_header_size; bfd_vma got_header_size; htab = elf32_arm_hash_table (info); @@ -9625,7 +9609,6 @@ elf32_arm_populate_plt_entry (bfd *output_bfd, struct bfd_link_info *info, /* There are no reserved entries in .igot.plt, and no special first entry in .iplt. */ got_header_size = 0; - plt_header_size = 0; } else { @@ -9634,348 +9617,320 @@ elf32_arm_populate_plt_entry (bfd *output_bfd, struct bfd_link_info *info, srel = htab->root.srelplt; got_header_size = get_elf_backend_data (output_bfd)->got_header_size; - plt_header_size = htab->plt_header_size; } BFD_ASSERT (splt != NULL && srel != NULL); - /* Fill in the entry in the procedure linkage table. */ - if (htab->root.target_os == is_symbian) + bfd_vma got_offset, got_address, plt_address; + bfd_vma got_displacement, initial_got_entry; + bfd_byte * ptr; + + BFD_ASSERT (sgot != NULL); + + /* Get the offset into the .(i)got.plt table of the entry that + corresponds to this function. */ + got_offset = (arm_plt->got_offset & -2); + + /* Get the index in the procedure linkage table which + corresponds to this symbol. This is the index of this symbol + in all the symbols for which we are making plt entries. + After the reserved .got.plt entries, all symbols appear in + the same order as in .plt. */ + if (htab->fdpic_p) + /* Function descriptor takes 8 bytes. */ + plt_index = (got_offset - got_header_size) / 8; + else + plt_index = (got_offset - got_header_size) / 4; + + /* Calculate the address of the GOT entry. */ + got_address = (sgot->output_section->vma + + sgot->output_offset + + got_offset); + + /* ...and the address of the PLT entry. */ + plt_address = (splt->output_section->vma + + splt->output_offset + + root_plt->offset); + + ptr = splt->contents + root_plt->offset; + if (htab->root.target_os == is_vxworks && bfd_link_pic (info)) { - BFD_ASSERT (dynindx >= 0); - put_arm_insn (htab, output_bfd, - elf32_arm_symbian_plt_entry[0], - splt->contents + root_plt->offset); - bfd_put_32 (output_bfd, - elf32_arm_symbian_plt_entry[1], - splt->contents + root_plt->offset + 4); - - /* Fill in the entry in the .rel.plt section. */ - rel.r_offset = (splt->output_section->vma - + splt->output_offset - + root_plt->offset + 4); - rel.r_info = ELF32_R_INFO (dynindx, R_ARM_GLOB_DAT); - - /* Get the index in the procedure linkage table which - corresponds to this symbol. This is the index of this symbol - in all the symbols for which we are making plt entries. The - first entry in the procedure linkage table is reserved. */ - plt_index = ((root_plt->offset - plt_header_size) - / htab->plt_entry_size); + unsigned int i; + bfd_vma val; + + for (i = 0; i != htab->plt_entry_size / 4; i++, ptr += 4) + { + val = elf32_arm_vxworks_shared_plt_entry[i]; + if (i == 2) + val |= got_address - sgot->output_section->vma; + if (i == 5) + val |= plt_index * RELOC_SIZE (htab); + if (i == 2 || i == 5) + bfd_put_32 (output_bfd, val, ptr); + else + put_arm_insn (htab, output_bfd, val, ptr); + } } - else + else if (htab->root.target_os == is_vxworks) { - bfd_vma got_offset, got_address, plt_address; - bfd_vma got_displacement, initial_got_entry; - bfd_byte * ptr; + unsigned int i; + bfd_vma val; - BFD_ASSERT (sgot != NULL); + for (i = 0; i != htab->plt_entry_size / 4; i++, ptr += 4) + { + val = elf32_arm_vxworks_exec_plt_entry[i]; + if (i == 2) + val |= got_address; + if (i == 4) + val |= 0xffffff & -((root_plt->offset + i * 4 + 8) >> 2); + if (i == 5) + val |= plt_index * RELOC_SIZE (htab); + if (i == 2 || i == 5) + bfd_put_32 (output_bfd, val, ptr); + else + put_arm_insn (htab, output_bfd, val, ptr); + } - /* Get the offset into the .(i)got.plt table of the entry that - corresponds to this function. */ - got_offset = (arm_plt->got_offset & -2); + loc = (htab->srelplt2->contents + + (plt_index * 2 + 1) * RELOC_SIZE (htab)); - /* Get the index in the procedure linkage table which - corresponds to this symbol. This is the index of this symbol - in all the symbols for which we are making plt entries. - After the reserved .got.plt entries, all symbols appear in - the same order as in .plt. */ - if (htab->fdpic_p) - /* Function descriptor takes 8 bytes. */ - plt_index = (got_offset - got_header_size) / 8; - else - plt_index = (got_offset - got_header_size) / 4; + /* Create the .rela.plt.unloaded R_ARM_ABS32 relocation + referencing the GOT for this PLT entry. */ + rel.r_offset = plt_address + 8; + rel.r_info = ELF32_R_INFO (htab->root.hgot->indx, R_ARM_ABS32); + rel.r_addend = got_offset; + SWAP_RELOC_OUT (htab) (output_bfd, &rel, loc); + loc += RELOC_SIZE (htab); - /* Calculate the address of the GOT entry. */ - got_address = (sgot->output_section->vma - + sgot->output_offset - + got_offset); + /* Create the R_ARM_ABS32 relocation referencing the + beginning of the PLT for this GOT entry. */ + rel.r_offset = got_address; + rel.r_info = ELF32_R_INFO (htab->root.hplt->indx, R_ARM_ABS32); + rel.r_addend = 0; + SWAP_RELOC_OUT (htab) (output_bfd, &rel, loc); + } + else if (htab->root.target_os == is_nacl) + { + /* Calculate the displacement between the PLT slot and the + common tail that's part of the special initial PLT slot. */ + int32_t tail_displacement + = ((splt->output_section->vma + splt->output_offset + + ARM_NACL_PLT_TAIL_OFFSET) + - (plt_address + htab->plt_entry_size + 4)); + BFD_ASSERT ((tail_displacement & 3) == 0); + tail_displacement >>= 2; - /* ...and the address of the PLT entry. */ - plt_address = (splt->output_section->vma - + splt->output_offset - + root_plt->offset); + BFD_ASSERT ((tail_displacement & 0xff000000) == 0 + || (-tail_displacement & 0xff000000) == 0); - ptr = splt->contents + root_plt->offset; - if (htab->root.target_os == is_vxworks && bfd_link_pic (info)) - { - unsigned int i; - bfd_vma val; + /* Calculate the displacement between the PLT slot and the entry + in the GOT. The offset accounts for the value produced by + adding to pc in the penultimate instruction of the PLT stub. */ + got_displacement = (got_address + - (plt_address + htab->plt_entry_size)); - for (i = 0; i != htab->plt_entry_size / 4; i++, ptr += 4) - { - val = elf32_arm_vxworks_shared_plt_entry[i]; - if (i == 2) - val |= got_address - sgot->output_section->vma; - if (i == 5) - val |= plt_index * RELOC_SIZE (htab); - if (i == 2 || i == 5) - bfd_put_32 (output_bfd, val, ptr); - else - put_arm_insn (htab, output_bfd, val, ptr); - } + /* NaCl does not support interworking at all. */ + BFD_ASSERT (!elf32_arm_plt_needs_thumb_stub_p (info, arm_plt)); + + put_arm_insn (htab, output_bfd, + elf32_arm_nacl_plt_entry[0] + | arm_movw_immediate (got_displacement), + ptr + 0); + put_arm_insn (htab, output_bfd, + elf32_arm_nacl_plt_entry[1] + | arm_movt_immediate (got_displacement), + ptr + 4); + put_arm_insn (htab, output_bfd, + elf32_arm_nacl_plt_entry[2], + ptr + 8); + put_arm_insn (htab, output_bfd, + elf32_arm_nacl_plt_entry[3] + | (tail_displacement & 0x00ffffff), + ptr + 12); + } + else if (htab->fdpic_p) + { + const bfd_vma *plt_entry = using_thumb_only(htab) + ? elf32_arm_fdpic_thumb_plt_entry + : elf32_arm_fdpic_plt_entry; + + /* Fill-up Thumb stub if needed. */ + if (elf32_arm_plt_needs_thumb_stub_p (info, arm_plt)) + { + put_thumb_insn (htab, output_bfd, + elf32_arm_plt_thumb_stub[0], ptr - 4); + put_thumb_insn (htab, output_bfd, + elf32_arm_plt_thumb_stub[1], ptr - 2); } - else if (htab->root.target_os == is_vxworks) + /* As we are using 32 bit instructions even for the Thumb + version, we have to use 'put_arm_insn' instead of + 'put_thumb_insn'. */ + put_arm_insn(htab, output_bfd, plt_entry[0], ptr + 0); + put_arm_insn(htab, output_bfd, plt_entry[1], ptr + 4); + put_arm_insn(htab, output_bfd, plt_entry[2], ptr + 8); + put_arm_insn(htab, output_bfd, plt_entry[3], ptr + 12); + bfd_put_32 (output_bfd, got_offset, ptr + 16); + + if (!(info->flags & DF_BIND_NOW)) { - unsigned int i; - bfd_vma val; - - for (i = 0; i != htab->plt_entry_size / 4; i++, ptr += 4) - { - val = elf32_arm_vxworks_exec_plt_entry[i]; - if (i == 2) - val |= got_address; - if (i == 4) - val |= 0xffffff & -((root_plt->offset + i * 4 + 8) >> 2); - if (i == 5) - val |= plt_index * RELOC_SIZE (htab); - if (i == 2 || i == 5) - bfd_put_32 (output_bfd, val, ptr); - else - put_arm_insn (htab, output_bfd, val, ptr); - } + /* funcdesc_value_reloc_offset. */ + bfd_put_32 (output_bfd, + htab->root.srelplt->reloc_count * RELOC_SIZE (htab), + ptr + 20); + put_arm_insn(htab, output_bfd, plt_entry[6], ptr + 24); + put_arm_insn(htab, output_bfd, plt_entry[7], ptr + 28); + put_arm_insn(htab, output_bfd, plt_entry[8], ptr + 32); + put_arm_insn(htab, output_bfd, plt_entry[9], ptr + 36); + } + } + else if (using_thumb_only (htab)) + { + /* PR ld/16017: Generate thumb only PLT entries. */ + if (!using_thumb2 (htab)) + { + /* FIXME: We ought to be able to generate thumb-1 PLT + instructions... */ + _bfd_error_handler (_("%pB: warning: thumb-1 mode PLT generation not currently supported"), + output_bfd); + return FALSE; + } - loc = (htab->srelplt2->contents - + (plt_index * 2 + 1) * RELOC_SIZE (htab)); + /* Calculate the displacement between the PLT slot and the entry in + the GOT. The 12-byte offset accounts for the value produced by + adding to pc in the 3rd instruction of the PLT stub. */ + got_displacement = got_address - (plt_address + 12); - /* Create the .rela.plt.unloaded R_ARM_ABS32 relocation - referencing the GOT for this PLT entry. */ - rel.r_offset = plt_address + 8; - rel.r_info = ELF32_R_INFO (htab->root.hgot->indx, R_ARM_ABS32); - rel.r_addend = got_offset; - SWAP_RELOC_OUT (htab) (output_bfd, &rel, loc); - loc += RELOC_SIZE (htab); + /* As we are using 32 bit instructions we have to use 'put_arm_insn' + instead of 'put_thumb_insn'. */ + put_arm_insn (htab, output_bfd, + elf32_thumb2_plt_entry[0] + | ((got_displacement & 0x000000ff) << 16) + | ((got_displacement & 0x00000700) << 20) + | ((got_displacement & 0x00000800) >> 1) + | ((got_displacement & 0x0000f000) >> 12), + ptr + 0); + put_arm_insn (htab, output_bfd, + elf32_thumb2_plt_entry[1] + | ((got_displacement & 0x00ff0000) ) + | ((got_displacement & 0x07000000) << 4) + | ((got_displacement & 0x08000000) >> 17) + | ((got_displacement & 0xf0000000) >> 28), + ptr + 4); + put_arm_insn (htab, output_bfd, + elf32_thumb2_plt_entry[2], + ptr + 8); + put_arm_insn (htab, output_bfd, + elf32_thumb2_plt_entry[3], + ptr + 12); + } + else + { + /* Calculate the displacement between the PLT slot and the + entry in the GOT. The eight-byte offset accounts for the + value produced by adding to pc in the first instruction + of the PLT stub. */ + got_displacement = got_address - (plt_address + 8); - /* Create the R_ARM_ABS32 relocation referencing the - beginning of the PLT for this GOT entry. */ - rel.r_offset = got_address; - rel.r_info = ELF32_R_INFO (htab->root.hplt->indx, R_ARM_ABS32); - rel.r_addend = 0; - SWAP_RELOC_OUT (htab) (output_bfd, &rel, loc); + if (elf32_arm_plt_needs_thumb_stub_p (info, arm_plt)) + { + put_thumb_insn (htab, output_bfd, + elf32_arm_plt_thumb_stub[0], ptr - 4); + put_thumb_insn (htab, output_bfd, + elf32_arm_plt_thumb_stub[1], ptr - 2); } - else if (htab->root.target_os == is_nacl) + + if (!elf32_arm_use_long_plt_entry) { - /* Calculate the displacement between the PLT slot and the - common tail that's part of the special initial PLT slot. */ - int32_t tail_displacement - = ((splt->output_section->vma + splt->output_offset - + ARM_NACL_PLT_TAIL_OFFSET) - - (plt_address + htab->plt_entry_size + 4)); - BFD_ASSERT ((tail_displacement & 3) == 0); - tail_displacement >>= 2; - - BFD_ASSERT ((tail_displacement & 0xff000000) == 0 - || (-tail_displacement & 0xff000000) == 0); - - /* Calculate the displacement between the PLT slot and the entry - in the GOT. The offset accounts for the value produced by - adding to pc in the penultimate instruction of the PLT stub. */ - got_displacement = (got_address - - (plt_address + htab->plt_entry_size)); - - /* NaCl does not support interworking at all. */ - BFD_ASSERT (!elf32_arm_plt_needs_thumb_stub_p (info, arm_plt)); + BFD_ASSERT ((got_displacement & 0xf0000000) == 0); put_arm_insn (htab, output_bfd, - elf32_arm_nacl_plt_entry[0] - | arm_movw_immediate (got_displacement), + elf32_arm_plt_entry_short[0] + | ((got_displacement & 0x0ff00000) >> 20), ptr + 0); put_arm_insn (htab, output_bfd, - elf32_arm_nacl_plt_entry[1] - | arm_movt_immediate (got_displacement), - ptr + 4); + elf32_arm_plt_entry_short[1] + | ((got_displacement & 0x000ff000) >> 12), + ptr+ 4); put_arm_insn (htab, output_bfd, - elf32_arm_nacl_plt_entry[2], + elf32_arm_plt_entry_short[2] + | (got_displacement & 0x00000fff), ptr + 8); - put_arm_insn (htab, output_bfd, - elf32_arm_nacl_plt_entry[3] - | (tail_displacement & 0x00ffffff), - ptr + 12); - } - else if (htab->fdpic_p) - { - const bfd_vma *plt_entry = using_thumb_only(htab) - ? elf32_arm_fdpic_thumb_plt_entry - : elf32_arm_fdpic_plt_entry; - - /* Fill-up Thumb stub if needed. */ - if (elf32_arm_plt_needs_thumb_stub_p (info, arm_plt)) - { - put_thumb_insn (htab, output_bfd, - elf32_arm_plt_thumb_stub[0], ptr - 4); - put_thumb_insn (htab, output_bfd, - elf32_arm_plt_thumb_stub[1], ptr - 2); - } - /* As we are using 32 bit instructions even for the Thumb - version, we have to use 'put_arm_insn' instead of - 'put_thumb_insn'. */ - put_arm_insn(htab, output_bfd, plt_entry[0], ptr + 0); - put_arm_insn(htab, output_bfd, plt_entry[1], ptr + 4); - put_arm_insn(htab, output_bfd, plt_entry[2], ptr + 8); - put_arm_insn(htab, output_bfd, plt_entry[3], ptr + 12); - bfd_put_32 (output_bfd, got_offset, ptr + 16); - - if (!(info->flags & DF_BIND_NOW)) - { - /* funcdesc_value_reloc_offset. */ - bfd_put_32 (output_bfd, - htab->root.srelplt->reloc_count * RELOC_SIZE (htab), - ptr + 20); - put_arm_insn(htab, output_bfd, plt_entry[6], ptr + 24); - put_arm_insn(htab, output_bfd, plt_entry[7], ptr + 28); - put_arm_insn(htab, output_bfd, plt_entry[8], ptr + 32); - put_arm_insn(htab, output_bfd, plt_entry[9], ptr + 36); - } +#ifdef FOUR_WORD_PLT + bfd_put_32 (output_bfd, elf32_arm_plt_entry_short[3], ptr + 12); +#endif } - else if (using_thumb_only (htab)) + else { - /* PR ld/16017: Generate thumb only PLT entries. */ - if (!using_thumb2 (htab)) - { - /* FIXME: We ought to be able to generate thumb-1 PLT - instructions... */ - _bfd_error_handler (_("%pB: warning: thumb-1 mode PLT generation not currently supported"), - output_bfd); - return FALSE; - } - - /* Calculate the displacement between the PLT slot and the entry in - the GOT. The 12-byte offset accounts for the value produced by - adding to pc in the 3rd instruction of the PLT stub. */ - got_displacement = got_address - (plt_address + 12); - - /* As we are using 32 bit instructions we have to use 'put_arm_insn' - instead of 'put_thumb_insn'. */ put_arm_insn (htab, output_bfd, - elf32_thumb2_plt_entry[0] - | ((got_displacement & 0x000000ff) << 16) - | ((got_displacement & 0x00000700) << 20) - | ((got_displacement & 0x00000800) >> 1) - | ((got_displacement & 0x0000f000) >> 12), + elf32_arm_plt_entry_long[0] + | ((got_displacement & 0xf0000000) >> 28), ptr + 0); put_arm_insn (htab, output_bfd, - elf32_thumb2_plt_entry[1] - | ((got_displacement & 0x00ff0000) ) - | ((got_displacement & 0x07000000) << 4) - | ((got_displacement & 0x08000000) >> 17) - | ((got_displacement & 0xf0000000) >> 28), + elf32_arm_plt_entry_long[1] + | ((got_displacement & 0x0ff00000) >> 20), ptr + 4); put_arm_insn (htab, output_bfd, - elf32_thumb2_plt_entry[2], - ptr + 8); + elf32_arm_plt_entry_long[2] + | ((got_displacement & 0x000ff000) >> 12), + ptr+ 8); put_arm_insn (htab, output_bfd, - elf32_thumb2_plt_entry[3], + elf32_arm_plt_entry_long[3] + | (got_displacement & 0x00000fff), ptr + 12); } - else - { - /* Calculate the displacement between the PLT slot and the - entry in the GOT. The eight-byte offset accounts for the - value produced by adding to pc in the first instruction - of the PLT stub. */ - got_displacement = got_address - (plt_address + 8); - - if (elf32_arm_plt_needs_thumb_stub_p (info, arm_plt)) - { - put_thumb_insn (htab, output_bfd, - elf32_arm_plt_thumb_stub[0], ptr - 4); - put_thumb_insn (htab, output_bfd, - elf32_arm_plt_thumb_stub[1], ptr - 2); - } - - if (!elf32_arm_use_long_plt_entry) - { - BFD_ASSERT ((got_displacement & 0xf0000000) == 0); - - put_arm_insn (htab, output_bfd, - elf32_arm_plt_entry_short[0] - | ((got_displacement & 0x0ff00000) >> 20), - ptr + 0); - put_arm_insn (htab, output_bfd, - elf32_arm_plt_entry_short[1] - | ((got_displacement & 0x000ff000) >> 12), - ptr+ 4); - put_arm_insn (htab, output_bfd, - elf32_arm_plt_entry_short[2] - | (got_displacement & 0x00000fff), - ptr + 8); -#ifdef FOUR_WORD_PLT - bfd_put_32 (output_bfd, elf32_arm_plt_entry_short[3], ptr + 12); -#endif - } - else - { - put_arm_insn (htab, output_bfd, - elf32_arm_plt_entry_long[0] - | ((got_displacement & 0xf0000000) >> 28), - ptr + 0); - put_arm_insn (htab, output_bfd, - elf32_arm_plt_entry_long[1] - | ((got_displacement & 0x0ff00000) >> 20), - ptr + 4); - put_arm_insn (htab, output_bfd, - elf32_arm_plt_entry_long[2] - | ((got_displacement & 0x000ff000) >> 12), - ptr+ 8); - put_arm_insn (htab, output_bfd, - elf32_arm_plt_entry_long[3] - | (got_displacement & 0x00000fff), - ptr + 12); - } - } + } - /* Fill in the entry in the .rel(a).(i)plt section. */ - rel.r_offset = got_address; - rel.r_addend = 0; - if (dynindx == -1) + /* Fill in the entry in the .rel(a).(i)plt section. */ + rel.r_offset = got_address; + rel.r_addend = 0; + if (dynindx == -1) + { + /* .igot.plt entries use IRELATIVE relocations against SYM_VALUE. + The dynamic linker or static executable then calls SYM_VALUE + to determine the correct run-time value of the .igot.plt entry. */ + rel.r_info = ELF32_R_INFO (0, R_ARM_IRELATIVE); + initial_got_entry = sym_value; + } + else + { + /* For FDPIC we will have to resolve a R_ARM_FUNCDESC_VALUE + used by PLT entry. */ + if (htab->fdpic_p) { - /* .igot.plt entries use IRELATIVE relocations against SYM_VALUE. - The dynamic linker or static executable then calls SYM_VALUE - to determine the correct run-time value of the .igot.plt entry. */ - rel.r_info = ELF32_R_INFO (0, R_ARM_IRELATIVE); - initial_got_entry = sym_value; + rel.r_info = ELF32_R_INFO (dynindx, R_ARM_FUNCDESC_VALUE); + initial_got_entry = 0; } else { - /* For FDPIC we will have to resolve a R_ARM_FUNCDESC_VALUE - used by PLT entry. */ - if (htab->fdpic_p) - { - rel.r_info = ELF32_R_INFO (dynindx, R_ARM_FUNCDESC_VALUE); - initial_got_entry = 0; - } - else - { - rel.r_info = ELF32_R_INFO (dynindx, R_ARM_JUMP_SLOT); - initial_got_entry = (splt->output_section->vma - + splt->output_offset); - - /* PR ld/16017 - When thumb only we need to set the LSB for any address that - will be used with an interworking branch instruction. */ - if (using_thumb_only (htab)) - initial_got_entry |= 1; - } + rel.r_info = ELF32_R_INFO (dynindx, R_ARM_JUMP_SLOT); + initial_got_entry = (splt->output_section->vma + + splt->output_offset); + + /* PR ld/16017 + When thumb only we need to set the LSB for any address that + will be used with an interworking branch instruction. */ + if (using_thumb_only (htab)) + initial_got_entry |= 1; } + } - /* Fill in the entry in the global offset table. */ - bfd_put_32 (output_bfd, initial_got_entry, - sgot->contents + got_offset); - - if (htab->fdpic_p && !(info->flags & DF_BIND_NOW)) - { - /* Setup initial funcdesc value. */ - /* FIXME: we don't support lazy binding because there is a - race condition between both words getting written and - some other thread attempting to read them. The ARM - architecture does not have an atomic 64 bit load/store - instruction that could be used to prevent it; it is - recommended that threaded FDPIC applications run with the - LD_BIND_NOW environment variable set. */ - bfd_put_32(output_bfd, plt_address + 0x18, - sgot->contents + got_offset); - bfd_put_32(output_bfd, -1 /*TODO*/, - sgot->contents + got_offset + 4); - } + /* Fill in the entry in the global offset table. */ + bfd_put_32 (output_bfd, initial_got_entry, + sgot->contents + got_offset); + + if (htab->fdpic_p && !(info->flags & DF_BIND_NOW)) + { + /* Setup initial funcdesc value. */ + /* FIXME: we don't support lazy binding because there is a + race condition between both words getting written and + some other thread attempting to read them. The ARM + architecture does not have an atomic 64 bit load/store + instruction that could be used to prevent it; it is + recommended that threaded FDPIC applications run with the + LD_BIND_NOW environment variable set. */ + bfd_put_32(output_bfd, plt_address + 0x18, + sgot->contents + got_offset); + bfd_put_32(output_bfd, -1 /*TODO*/, + sgot->contents + got_offset + 4); } if (dynindx == -1) @@ -10588,47 +10543,10 @@ elf32_arm_final_link_relocate (reloc_howto_type * howto, /* This symbol is local, or marked to become local. */ BFD_ASSERT (r_type == R_ARM_ABS32 || r_type == R_ARM_ABS32_NOI || (globals->fdpic_p && !bfd_link_pic(info))); - if (globals->root.target_os == is_symbian) - { - asection *osec; - - /* On Symbian OS, the data segment and text segement - can be relocated independently. Therefore, we - must indicate the segment to which this - relocation is relative. The BPABI allows us to - use any symbol in the right segment; we just use - the section symbol as it is convenient. (We - cannot use the symbol given by "h" directly as it - will not appear in the dynamic symbol table.) - - Note that the dynamic linker ignores the section - symbol value, so we don't subtract osec->vma - from the emitted reloc addend. */ - if (sym_sec) - osec = sym_sec->output_section; - else - osec = input_section->output_section; - symbol = 0; - if (osec && elf_section_data (osec)) - symbol = elf_section_data (osec)->dynindx; - if (symbol == 0) - { - struct elf_link_hash_table *htab = elf_hash_table (info); - - if ((osec->flags & SEC_READONLY) == 0 - && htab->data_index_section != NULL) - osec = htab->data_index_section; - else - osec = htab->text_index_section; - symbol = elf_section_data (osec)->dynindx; - } - BFD_ASSERT (symbol != 0); - } - else - /* On SVR4-ish systems, the dynamic loader cannot - relocate the text and data segments independently, - so the symbol does not matter. */ - symbol = 0; + /* On SVR4-ish systems, the dynamic loader cannot + relocate the text and data segments independently, + so the symbol does not matter. */ + symbol = 0; if (dynreloc_st_type == STT_GNU_IFUNC) /* We have an STT_GNU_IFUNC symbol that doesn't resolve to the .iplt entry. Instead, every non-call reference @@ -15641,16 +15559,6 @@ elf32_arm_check_relocs (bfd *abfd, struct bfd_link_info *info, if (sreloc == NULL) return FALSE; - - /* BPABI objects never have dynamic relocations mapped. */ - if (htab->root.target_os == is_symbian) - { - flagword flags; - - flags = bfd_section_flags (sreloc); - flags &= ~(SEC_LOAD | SEC_ALLOC); - bfd_set_section_flags (sreloc, flags); - } } /* If this is a global symbol, count the number of @@ -16284,111 +16192,108 @@ allocate_dynrelocs_for_symbol (struct elf_link_hash_entry *h, void * inf) /* Make sure this symbol is output as a dynamic symbol. Undefined weak syms won't yet be marked as dynamic. */ - if (htab->root.dynamic_sections_created && h->dynindx == -1 && !h->forced_local + if (htab->root.dynamic_sections_created + && h->dynindx == -1 + && !h->forced_local && h->root.type == bfd_link_hash_undefweak) { if (! bfd_elf_link_record_dynamic_symbol (info, h)) return FALSE; } - if (htab->root.target_os != is_symbian) - { - s = htab->root.sgot; - h->got.offset = s->size; + s = htab->root.sgot; + h->got.offset = s->size; - if (tls_type == GOT_UNKNOWN) - abort (); + if (tls_type == GOT_UNKNOWN) + abort (); - if (tls_type == GOT_NORMAL) - /* Non-TLS symbols need one GOT slot. */ - s->size += 4; - else + if (tls_type == GOT_NORMAL) + /* Non-TLS symbols need one GOT slot. */ + s->size += 4; + else + { + if (tls_type & GOT_TLS_GDESC) { - if (tls_type & GOT_TLS_GDESC) - { - /* R_ARM_TLS_DESC needs 2 GOT slots. */ - eh->tlsdesc_got - = (htab->root.sgotplt->size - - elf32_arm_compute_jump_table_size (htab)); - htab->root.sgotplt->size += 8; - h->got.offset = (bfd_vma) -2; - /* plt.got_offset needs to know there's a TLS_DESC - reloc in the middle of .got.plt. */ - htab->num_tls_desc++; - } - - if (tls_type & GOT_TLS_GD) - { - /* R_ARM_TLS_GD32 and R_ARM_TLS_GD32_FDPIC need two - consecutive GOT slots. If the symbol is both GD - and GDESC, got.offset may have been - overwritten. */ - h->got.offset = s->size; - s->size += 8; - } + /* R_ARM_TLS_DESC needs 2 GOT slots. */ + eh->tlsdesc_got + = (htab->root.sgotplt->size + - elf32_arm_compute_jump_table_size (htab)); + htab->root.sgotplt->size += 8; + h->got.offset = (bfd_vma) -2; + /* plt.got_offset needs to know there's a TLS_DESC + reloc in the middle of .got.plt. */ + htab->num_tls_desc++; + } - if (tls_type & GOT_TLS_IE) - /* R_ARM_TLS_IE32/R_ARM_TLS_IE32_FDPIC need one GOT - slot. */ - s->size += 4; + if (tls_type & GOT_TLS_GD) + { + /* R_ARM_TLS_GD32 and R_ARM_TLS_GD32_FDPIC need two + consecutive GOT slots. If the symbol is both GD + and GDESC, got.offset may have been + overwritten. */ + h->got.offset = s->size; + s->size += 8; } - dyn = htab->root.dynamic_sections_created; + if (tls_type & GOT_TLS_IE) + /* R_ARM_TLS_IE32/R_ARM_TLS_IE32_FDPIC need one GOT + slot. */ + s->size += 4; + } - indx = 0; - if (WILL_CALL_FINISH_DYNAMIC_SYMBOL (dyn, - bfd_link_pic (info), - h) - && (!bfd_link_pic (info) - || !SYMBOL_REFERENCES_LOCAL (info, h))) - indx = h->dynindx; + dyn = htab->root.dynamic_sections_created; - if (tls_type != GOT_NORMAL - && (bfd_link_dll (info) || indx != 0) - && (ELF_ST_VISIBILITY (h->other) == STV_DEFAULT - || h->root.type != bfd_link_hash_undefweak)) - { - if (tls_type & GOT_TLS_IE) - elf32_arm_allocate_dynrelocs (info, htab->root.srelgot, 1); + indx = 0; + if (WILL_CALL_FINISH_DYNAMIC_SYMBOL (dyn, bfd_link_pic (info), h) + && (!bfd_link_pic (info) + || !SYMBOL_REFERENCES_LOCAL (info, h))) + indx = h->dynindx; - if (tls_type & GOT_TLS_GD) - elf32_arm_allocate_dynrelocs (info, htab->root.srelgot, 1); + if (tls_type != GOT_NORMAL + && (bfd_link_dll (info) || indx != 0) + && (ELF_ST_VISIBILITY (h->other) == STV_DEFAULT + || h->root.type != bfd_link_hash_undefweak)) + { + if (tls_type & GOT_TLS_IE) + elf32_arm_allocate_dynrelocs (info, htab->root.srelgot, 1); - if (tls_type & GOT_TLS_GDESC) - { - elf32_arm_allocate_dynrelocs (info, htab->root.srelplt, 1); - /* GDESC needs a trampoline to jump to. */ - htab->tls_trampoline = -1; - } + if (tls_type & GOT_TLS_GD) + elf32_arm_allocate_dynrelocs (info, htab->root.srelgot, 1); - /* Only GD needs it. GDESC just emits one relocation per - 2 entries. */ - if ((tls_type & GOT_TLS_GD) && indx != 0) - elf32_arm_allocate_dynrelocs (info, htab->root.srelgot, 1); - } - else if (((indx != -1) || htab->fdpic_p) - && !SYMBOL_REFERENCES_LOCAL (info, h)) + if (tls_type & GOT_TLS_GDESC) { - if (htab->root.dynamic_sections_created) - /* Reserve room for the GOT entry's R_ARM_GLOB_DAT relocation. */ - elf32_arm_allocate_dynrelocs (info, htab->root.srelgot, 1); + elf32_arm_allocate_dynrelocs (info, htab->root.srelplt, 1); + /* GDESC needs a trampoline to jump to. */ + htab->tls_trampoline = -1; } - else if (h->type == STT_GNU_IFUNC - && eh->plt.noncall_refcount == 0) - /* No non-call references resolve the STT_GNU_IFUNC's PLT entry; - they all resolve dynamically instead. Reserve room for the - GOT entry's R_ARM_IRELATIVE relocation. */ - elf32_arm_allocate_irelocs (info, htab->root.srelgot, 1); - else if (bfd_link_pic (info) - && !UNDEFWEAK_NO_DYNAMIC_RELOC (info, h)) - /* Reserve room for the GOT entry's R_ARM_RELATIVE relocation. */ + + /* Only GD needs it. GDESC just emits one relocation per + 2 entries. */ + if ((tls_type & GOT_TLS_GD) && indx != 0) elf32_arm_allocate_dynrelocs (info, htab->root.srelgot, 1); - else if (htab->fdpic_p && tls_type == GOT_NORMAL) - /* Reserve room for rofixup for FDPIC executable. */ - /* TLS relocs do not need space since they are completely - resolved. */ - htab->srofixup->size += 4; } + else if (((indx != -1) || htab->fdpic_p) + && !SYMBOL_REFERENCES_LOCAL (info, h)) + { + if (htab->root.dynamic_sections_created) + /* Reserve room for the GOT entry's R_ARM_GLOB_DAT relocation. */ + elf32_arm_allocate_dynrelocs (info, htab->root.srelgot, 1); + } + else if (h->type == STT_GNU_IFUNC + && eh->plt.noncall_refcount == 0) + /* No non-call references resolve the STT_GNU_IFUNC's PLT entry; + they all resolve dynamically instead. Reserve room for the + GOT entry's R_ARM_IRELATIVE relocation. */ + elf32_arm_allocate_irelocs (info, htab->root.srelgot, 1); + else if (bfd_link_pic (info) + && !UNDEFWEAK_NO_DYNAMIC_RELOC (info, h)) + /* Reserve room for the GOT entry's R_ARM_RELATIVE relocation. */ + elf32_arm_allocate_dynrelocs (info, htab->root.srelgot, 1); + else if (htab->fdpic_p && tls_type == GOT_NORMAL) + /* Reserve room for rofixup for FDPIC executable. */ + /* TLS relocs do not need space since they are completely + resolved. */ + htab->srofixup->size += 4; } else h->got.offset = (bfd_vma) -1; @@ -16400,7 +16305,8 @@ allocate_dynrelocs_for_symbol (struct elf_link_hash_entry *h, void * inf) if (h->dynindx != -1) abort(); - /* We only allocate one function descriptor with its associated relocation. */ + /* We only allocate one function descriptor with its associated + relocation. */ if (eh->fdpic_cnts.funcdesc_offset == -1) { asection *s = htab->root.sgot; @@ -16426,13 +16332,15 @@ allocate_dynrelocs_for_symbol (struct elf_link_hash_entry *h, void * inf) if (h->dynindx == -1) { - /* We only allocate one function descriptor with its associated relocation. q */ + /* We only allocate one function descriptor with its + associated relocation. */ if (eh->fdpic_cnts.funcdesc_offset == -1) { eh->fdpic_cnts.funcdesc_offset = s->size; s->size += 8; - /* We will add an R_ARM_FUNCDESC_VALUE relocation or two rofixups. */ + /* We will add an R_ARM_FUNCDESC_VALUE relocation or two + rofixups. */ if (bfd_link_pic(info)) elf32_arm_allocate_dynrelocs (info, htab->root.srelgot, 1); else @@ -16459,14 +16367,16 @@ allocate_dynrelocs_for_symbol (struct elf_link_hash_entry *h, void * inf) if (h->dynindx == -1) { - /* We only allocate one function descriptor with its associated relocation. */ + /* We only allocate one function descriptor with its + associated relocation. */ if (eh->fdpic_cnts.funcdesc_offset == -1) { asection *s = htab->root.sgot; eh->fdpic_cnts.funcdesc_offset = s->size; s->size += 8; - /* We will add an R_ARM_FUNCDESC_VALUE relocation or two rofixups. */ + /* We will add an R_ARM_FUNCDESC_VALUE relocation or two + rofixups. */ if (bfd_link_pic(info)) elf32_arm_allocate_dynrelocs (info, htab->root.srelgot, 1); else @@ -16529,7 +16439,9 @@ allocate_dynrelocs_for_symbol (struct elf_link_hash_entry *h, void * inf) space for pc-relative relocs that have become local due to symbol visibility changes. */ - if (bfd_link_pic (info) || htab->root.is_relocatable_executable || htab->fdpic_p) + if (bfd_link_pic (info) + || htab->root.is_relocatable_executable + || htab->fdpic_p) { /* Relocs that use pc_count are PC-relative forms, which will appear on something like ".long foo - ." or "movw REG, foo - .". We want @@ -16637,7 +16549,8 @@ allocate_dynrelocs_for_symbol (struct elf_link_hash_entry *h, void * inf) && eh->plt.noncall_refcount == 0 && SYMBOL_REFERENCES_LOCAL (info, h)) elf32_arm_allocate_irelocs (info, sreloc, p->count); - else if (h->dynindx != -1 && (!bfd_link_pic(info) || !info->symbolic || !h->def_regular)) + else if (h->dynindx != -1 + && (!bfd_link_pic(info) || !info->symbolic || !h->def_regular)) elf32_arm_allocate_dynrelocs (info, sreloc, p->count); else if (htab->fdpic_p && !bfd_link_pic(info)) htab->srofixup->size += 4 * p->count; @@ -17267,7 +17180,7 @@ elf32_arm_finish_dynamic_sections (bfd * output_bfd, struct bfd_link_info * info splt = htab->root.splt; BFD_ASSERT (splt != NULL && sdyn != NULL); - BFD_ASSERT (htab->root.target_os == is_symbian || sgot != NULL); + BFD_ASSERT (sgot != NULL); dyncon = (Elf32_External_Dyn *) sdyn->contents; dynconend = (Elf32_External_Dyn *) (sdyn->contents + sdyn->size); @@ -17282,8 +17195,6 @@ elf32_arm_finish_dynamic_sections (bfd * output_bfd, struct bfd_link_info * info switch (dyn.d_tag) { - unsigned int type; - default: if (htab->root.target_os == is_vxworks && elf_vxworks_finish_dynamic_entry (output_bfd, &dyn)) @@ -17291,27 +17202,15 @@ elf32_arm_finish_dynamic_sections (bfd * output_bfd, struct bfd_link_info * info break; case DT_HASH: - name = ".hash"; - goto get_vma_if_bpabi; case DT_STRTAB: - name = ".dynstr"; - goto get_vma_if_bpabi; case DT_SYMTAB: - name = ".dynsym"; - goto get_vma_if_bpabi; case DT_VERSYM: - name = ".gnu.version"; - goto get_vma_if_bpabi; case DT_VERDEF: - name = ".gnu.version_d"; - goto get_vma_if_bpabi; case DT_VERNEED: - name = ".gnu.version_r"; - goto get_vma_if_bpabi; + break; case DT_PLTGOT: - name = (htab->root.target_os == is_symbian - ? ".got" : ".got.plt"); + name = ".got.plt"; goto get_vma; case DT_JMPREL: name = RELOC_SECTION (htab, ".plt"); @@ -17324,21 +17223,10 @@ elf32_arm_finish_dynamic_sections (bfd * output_bfd, struct bfd_link_info * info bfd_set_error (bfd_error_invalid_operation); return FALSE; } - if (htab->root.target_os != is_symbian) - dyn.d_un.d_ptr = s->output_section->vma + s->output_offset; - else - /* In the BPABI, tags in the PT_DYNAMIC section point - at the file offset, not the memory address, for the - convenience of the post linker. */ - dyn.d_un.d_ptr = s->output_section->filepos + s->output_offset; + dyn.d_un.d_ptr = s->output_section->vma + s->output_offset; bfd_elf32_swap_dyn_out (output_bfd, &dyn, dyncon); break; - get_vma_if_bpabi: - if (htab->root.target_os == is_symbian) - goto get_vma; - break; - case DT_PLTRELSZ: s = htab->root.srelplt; BFD_ASSERT (s != NULL); @@ -17350,35 +17238,6 @@ elf32_arm_finish_dynamic_sections (bfd * output_bfd, struct bfd_link_info * info case DT_RELASZ: case DT_REL: case DT_RELA: - /* In the BPABI, the DT_REL tag must point at the file - offset, not the VMA, of the first relocation - section. So, we use code similar to that in - elflink.c, but do not check for SHF_ALLOC on the - relocation section, since relocation sections are - never allocated under the BPABI. PLT relocs are also - included. */ - if (htab->root.target_os == is_symbian) - { - unsigned int i; - type = ((dyn.d_tag == DT_REL || dyn.d_tag == DT_RELSZ) - ? SHT_REL : SHT_RELA); - dyn.d_un.d_val = 0; - for (i = 1; i < elf_numsections (output_bfd); i++) - { - Elf_Internal_Shdr *hdr - = elf_elfsections (output_bfd)[i]; - if (hdr->sh_type == type) - { - if (dyn.d_tag == DT_RELSZ - || dyn.d_tag == DT_RELASZ) - dyn.d_un.d_val += hdr->sh_size; - else if ((ufile_ptr) hdr->sh_offset - <= dyn.d_un.d_val - 1) - dyn.d_un.d_val = hdr->sh_offset; - } - } - bfd_elf32_swap_dyn_out (output_bfd, &dyn, dyncon); - } break; case DT_TLSDESC_PLT: @@ -17846,14 +17705,7 @@ elf32_arm_output_plt_map_1 (output_arch_syminfo *osi, (osi->info->output_bfd, osi->sec->output_section)); addr = root_plt->offset & -2; - if (htab->root.target_os == is_symbian) - { - if (!elf32_arm_output_map_sym (osi, ARM_MAP_ARM, addr)) - return FALSE; - if (!elf32_arm_output_map_sym (osi, ARM_MAP_DATA, addr + 4)) - return FALSE; - } - else if (htab->root.target_os == is_vxworks) + if (htab->root.target_os == is_vxworks) { if (!elf32_arm_output_map_sym (osi, ARM_MAP_ARM, addr)) return FALSE; @@ -18224,8 +18076,7 @@ elf32_arm_output_arch_local_syms (bfd *output_bfd, osi.sec_shndx = (_bfd_elf_section_from_bfd_section (output_bfd, osi.sec->output_section)); - /* Output mapping symbols for the plt header. SymbianOS does not have a - plt header. */ + /* Output mapping symbols for the plt header. */ if (htab->root.target_os == is_vxworks) { /* VxWorks shared libraries have no PLT header. */ @@ -18251,7 +18102,7 @@ elf32_arm_output_arch_local_syms (bfd *output_bfd, if (!elf32_arm_output_map_sym (&osi, ARM_MAP_THUMB, 16)) return FALSE; } - else if (htab->root.target_os != is_symbian && !htab->fdpic_p) + else if (!htab->fdpic_p) { if (!elf32_arm_output_map_sym (&osi, ARM_MAP_ARM, 0)) return FALSE; @@ -20778,167 +20629,3 @@ elf32_arm_merge_private_bfd_data (bfd *ibfd, struct bfd_link_info *info) return flags_compatible; } - - -/* Symbian OS Targets. */ - -#undef TARGET_LITTLE_SYM -#define TARGET_LITTLE_SYM arm_elf32_symbian_le_vec -#undef TARGET_LITTLE_NAME -#define TARGET_LITTLE_NAME "elf32-littlearm-symbian" -#undef TARGET_BIG_SYM -#define TARGET_BIG_SYM arm_elf32_symbian_be_vec -#undef TARGET_BIG_NAME -#define TARGET_BIG_NAME "elf32-bigarm-symbian" - -/* Like elf32_arm_link_hash_table_create -- but overrides - appropriately for Symbian OS. */ - -static struct bfd_link_hash_table * -elf32_arm_symbian_link_hash_table_create (bfd *abfd) -{ - struct bfd_link_hash_table *ret; - - ret = elf32_arm_link_hash_table_create (abfd); - if (ret) - { - struct elf32_arm_link_hash_table *htab - = (struct elf32_arm_link_hash_table *)ret; - /* There is no PLT header for Symbian OS. */ - htab->plt_header_size = 0; - /* The PLT entries are each one instruction and one word. */ - htab->plt_entry_size = 4 * ARRAY_SIZE (elf32_arm_symbian_plt_entry); - /* Symbian uses armv5t or above, so use_blx is always true. */ - htab->use_blx = 1; - htab->root.is_relocatable_executable = 1; - } - return ret; -} - -static const struct bfd_elf_special_section -elf32_arm_symbian_special_sections[] = -{ - /* In a BPABI executable, the dynamic linking sections do not go in - the loadable read-only segment. The post-linker may wish to - refer to these sections, but they are not part of the final - program image. */ - { STRING_COMMA_LEN (".dynamic"), 0, SHT_DYNAMIC, 0 }, - { STRING_COMMA_LEN (".dynstr"), 0, SHT_STRTAB, 0 }, - { STRING_COMMA_LEN (".dynsym"), 0, SHT_DYNSYM, 0 }, - { STRING_COMMA_LEN (".got"), 0, SHT_PROGBITS, 0 }, - { STRING_COMMA_LEN (".hash"), 0, SHT_HASH, 0 }, - /* These sections do not need to be writable as the SymbianOS - postlinker will arrange things so that no dynamic relocation is - required. */ - { STRING_COMMA_LEN (".init_array"), 0, SHT_INIT_ARRAY, SHF_ALLOC }, - { STRING_COMMA_LEN (".fini_array"), 0, SHT_FINI_ARRAY, SHF_ALLOC }, - { STRING_COMMA_LEN (".preinit_array"), 0, SHT_PREINIT_ARRAY, SHF_ALLOC }, - { NULL, 0, 0, 0, 0 } -}; - -static void -elf32_arm_symbian_begin_write_processing (bfd *abfd, - struct bfd_link_info *link_info) -{ - /* BPABI objects are never loaded directly by an OS kernel; they are - processed by a postlinker first, into an OS-specific format. If - the D_PAGED bit is set on the file, BFD will align segments on - page boundaries, so that an OS can directly map the file. With - BPABI objects, that just results in wasted space. In addition, - because we clear the D_PAGED bit, map_sections_to_segments will - recognize that the program headers should not be mapped into any - loadable segment. */ - abfd->flags &= ~D_PAGED; - elf32_arm_begin_write_processing (abfd, link_info); -} - -static bfd_boolean -elf32_arm_symbian_modify_segment_map (bfd *abfd, - struct bfd_link_info *info) -{ - struct elf_segment_map *m; - asection *dynsec; - - /* BPABI shared libraries and executables should have a PT_DYNAMIC - segment. However, because the .dynamic section is not marked - with SEC_LOAD, the generic ELF code will not create such a - segment. */ - dynsec = bfd_get_section_by_name (abfd, ".dynamic"); - if (dynsec) - { - for (m = elf_seg_map (abfd); m != NULL; m = m->next) - if (m->p_type == PT_DYNAMIC) - break; - - if (m == NULL) - { - m = _bfd_elf_make_dynamic_segment (abfd, dynsec); - m->next = elf_seg_map (abfd); - elf_seg_map (abfd) = m; - } - } - - /* Also call the generic arm routine. */ - return elf32_arm_modify_segment_map (abfd, info); -} - -/* Return address for Ith PLT stub in section PLT, for relocation REL - or (bfd_vma) -1 if it should not be included. */ - -static bfd_vma -elf32_arm_symbian_plt_sym_val (bfd_vma i, const asection *plt, - const arelent *rel ATTRIBUTE_UNUSED) -{ - return plt->vma + 4 * ARRAY_SIZE (elf32_arm_symbian_plt_entry) * i; -} - -#undef elf32_bed -#define elf32_bed elf32_arm_symbian_bed - -/* The dynamic sections are not allocated on SymbianOS; the postlinker - will process them and then discard them. */ -#undef ELF_DYNAMIC_SEC_FLAGS -#define ELF_DYNAMIC_SEC_FLAGS \ - (SEC_HAS_CONTENTS | SEC_IN_MEMORY | SEC_LINKER_CREATED) - -#undef elf_backend_emit_relocs - -#undef bfd_elf32_bfd_link_hash_table_create -#define bfd_elf32_bfd_link_hash_table_create elf32_arm_symbian_link_hash_table_create -#undef elf_backend_special_sections -#define elf_backend_special_sections elf32_arm_symbian_special_sections -#undef elf_backend_begin_write_processing -#define elf_backend_begin_write_processing elf32_arm_symbian_begin_write_processing -#undef elf_backend_final_write_processing -#define elf_backend_final_write_processing elf32_arm_final_write_processing - -#undef elf_backend_modify_segment_map -#define elf_backend_modify_segment_map elf32_arm_symbian_modify_segment_map - -/* There is no .got section for BPABI objects, and hence no header. */ -#undef elf_backend_got_header_size -#define elf_backend_got_header_size 0 - -/* Similarly, there is no .got.plt section. */ -#undef elf_backend_want_got_plt -#define elf_backend_want_got_plt 0 - -#undef elf_backend_plt_sym_val -#define elf_backend_plt_sym_val elf32_arm_symbian_plt_sym_val - -#undef elf_backend_may_use_rel_p -#define elf_backend_may_use_rel_p 1 -#undef elf_backend_may_use_rela_p -#define elf_backend_may_use_rela_p 0 -#undef elf_backend_default_use_rela_p -#define elf_backend_default_use_rela_p 0 -#undef elf_backend_want_plt_sym -#define elf_backend_want_plt_sym 0 -#undef elf_backend_dtrel_excludes_plt -#define elf_backend_dtrel_excludes_plt 0 -#undef ELF_MAXPAGESIZE -#define ELF_MAXPAGESIZE 0x8000 -#undef ELF_TARGET_OS -#define ELF_TARGET_OS is_symbian - -#include "elf32-target.h" diff --git a/bfd/targets.c b/bfd/targets.c index 076441b3a21..dcd42636df0 100644 --- a/bfd/targets.c +++ b/bfd/targets.c @@ -697,8 +697,6 @@ extern const bfd_target arm_elf32_fdpic_be_vec; extern const bfd_target arm_elf32_fdpic_le_vec; extern const bfd_target arm_elf32_nacl_be_vec; extern const bfd_target arm_elf32_nacl_le_vec; -extern const bfd_target arm_elf32_symbian_be_vec; -extern const bfd_target arm_elf32_symbian_le_vec; extern const bfd_target arm_elf32_vxworks_be_vec; extern const bfd_target arm_elf32_vxworks_le_vec; extern const bfd_target arm_mach_o_vec; @@ -1021,8 +1019,6 @@ static const bfd_target * const _bfd_target_vector[] = &arm_elf32_le_vec, &arm_elf32_fdpic_be_vec, &arm_elf32_fdpic_le_vec, - &arm_elf32_symbian_be_vec, - &arm_elf32_symbian_le_vec, &arm_elf32_vxworks_be_vec, &arm_elf32_vxworks_le_vec, &arm_mach_o_vec, diff --git a/binutils/ChangeLog b/binutils/ChangeLog index 69150272843..4da4636e961 100644 --- a/binutils/ChangeLog +++ b/binutils/ChangeLog @@ -1,3 +1,8 @@ +2021-02-09 Alan Modra <amodra@gmail.com> + + * testsuite/lib/binutils-common.exp (supports_gnu_osabi): Remove + symbianelf. + 2021-02-07 Alan Modra <amodra@gmail.com> * unwind-ia64.c (unw_print_xyreg): Don't leave output buffer diff --git a/binutils/testsuite/lib/binutils-common.exp b/binutils/testsuite/lib/binutils-common.exp index 616a6cad3d5..029284167a8 100644 --- a/binutils/testsuite/lib/binutils-common.exp +++ b/binutils/testsuite/lib/binutils-common.exp @@ -213,7 +213,6 @@ proc supports_gnu_osabi {} { || [istarget *-*-linux*] || [istarget *-*-nacl*] || ( [istarget *-*-*bsd*] && ![istarget arm*-*-netbsd*] ) - || [istarget *-*-symbianelf] || [istarget *-*-lynxos] || ( [istarget *-*-nto*] && ![istarget arm*-*-*] ) || [istarget *-*-irix*] diff --git a/configure b/configure index 25d2fc48c66..9eebe3a17da 100755 --- a/configure +++ b/configure @@ -3442,9 +3442,6 @@ case "${target}" in arm-wince-pe) noconfigdirs="$noconfigdirs target-libffi" ;; - arm*-*-symbianelf*) - noconfigdirs="$noconfigdirs target-libffi" - ;; cris-*-* | crisv32-*-*) case "${target}" in *-*-linux*) diff --git a/configure.ac b/configure.ac index d39019d7093..a721316d07b 100644 --- a/configure.ac +++ b/configure.ac @@ -728,9 +728,6 @@ case "${target}" in arm-wince-pe) noconfigdirs="$noconfigdirs target-libffi" ;; - arm*-*-symbianelf*) - noconfigdirs="$noconfigdirs target-libffi" - ;; cris-*-* | crisv32-*-*) case "${target}" in *-*-linux*) diff --git a/gas/ChangeLog b/gas/ChangeLog index 8ab1d35d144..031bb54d7d2 100644 --- a/gas/ChangeLog +++ b/gas/ChangeLog @@ -1,3 +1,24 @@ +2021-02-09 Alan Modra <amodra@gmail.com> + + * Makefile.am (TARG_ENV_HFILES): Remove config/te-symbian.h. + * config/tc-arm.c (elf32_arm_target_format): Remove TE_SYMBIAN + support. + * config/te-symbian.h: Delete. + * configure.tgt: Remove arm-*-symbianelf*. + * testsuite/gas/arm/arch4t-eabi.d: Don't mention symbianelf in + target selection. + * testsuite/gas/arm/arch4t.d: Likewise. + * testsuite/gas/arm/got_prel.d: Likewise. + * testsuite/gas/arm/mapdir.d: Likewise. + * testsuite/gas/arm/mapmisc.d: Likewise. + * testsuite/gas/arm/mapsecs.d: Likewise. + * testsuite/gas/arm/mapshort-eabi.d: Likewise. + * testsuite/gas/arm/thumb-eabi.d: Likewise. + * testsuite/gas/arm/thumb.d: Likewise. + * testsuite/gas/arm/thumbrel.d: Likewise. + * Makefile.in: Regenerate. + * po/POTFILES.in: Regenerate. + 2021-02-09 Nick Clifton <nickc@redhat.com> PR 27384 diff --git a/gas/Makefile.am b/gas/Makefile.am index ce7da76d796..513e6289cbf 100644 --- a/gas/Makefile.am +++ b/gas/Makefile.am @@ -332,7 +332,6 @@ TARG_ENV_HFILES = \ config/te-pe.h \ config/te-solaris.h \ config/te-svr4.h \ - config/te-symbian.h \ config/te-tmips.h \ config/te-vxworks.h \ config/te-wince-pe.h diff --git a/gas/Makefile.in b/gas/Makefile.in index 008ed582ab4..0a6f33df251 100644 --- a/gas/Makefile.in +++ b/gas/Makefile.in @@ -723,7 +723,6 @@ TARG_ENV_HFILES = \ config/te-pe.h \ config/te-solaris.h \ config/te-svr4.h \ - config/te-symbian.h \ config/te-tmips.h \ config/te-vxworks.h \ config/te-wince-pe.h diff --git a/gas/config/tc-arm.c b/gas/config/tc-arm.c index ff962daf749..d3bb56d7ba6 100644 --- a/gas/config/tc-arm.c +++ b/gas/config/tc-arm.c @@ -30495,11 +30495,7 @@ arm_fix_adjustable (fixS * fixP) const char * elf32_arm_target_format (void) { -#ifdef TE_SYMBIAN - return (target_big_endian - ? "elf32-bigarm-symbian" - : "elf32-littlearm-symbian"); -#elif defined (TE_VXWORKS) +#if defined (TE_VXWORKS) return (target_big_endian ? "elf32-bigarm-vxworks" : "elf32-littlearm-vxworks"); diff --git a/gas/config/te-symbian.h b/gas/config/te-symbian.h deleted file mode 100644 index 0bcdce1316c..00000000000 --- a/gas/config/te-symbian.h +++ /dev/null @@ -1,22 +0,0 @@ -/* Copyright (C) 2004-2021 Free Software Foundation, Inc. - - This file is part of GAS, the GNU Assembler. - - GAS is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as - published by the Free Software Foundation; either version 3, - or (at your option) any later version. - - GAS is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See - the GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with GAS; see the file COPYING. If not, write to the Free - Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA - 02110-1301, USA. */ - -#define TE_SYMBIAN 1 - -#include "te-armeabi.h" diff --git a/gas/configure.tgt b/gas/configure.tgt index 80d903c651c..338892add2a 100644 --- a/gas/configure.tgt +++ b/gas/configure.tgt @@ -144,7 +144,6 @@ case ${generic_target} in arm-*-phoenix*) fmt=elf ;; arm-*-elf) fmt=elf ;; arm-*-eabi* | arm-*-rtems* | arm-*-genode*) fmt=elf em=armeabi ;; - arm-*-symbianelf*) fmt=elf em=symbian ;; arm-*-kaos*) fmt=elf ;; arm-*-conix*) fmt=elf ;; arm-*-freebsd[89].* | armeb-*-freebsd[89].*) diff --git a/gas/po/POTFILES.in b/gas/po/POTFILES.in index 81bc3e926ad..fa43f57717e 100644 --- a/gas/po/POTFILES.in +++ b/gas/po/POTFILES.in @@ -208,7 +208,6 @@ config/te-pc532mach.h config/te-pe.h config/te-solaris.h config/te-svr4.h -config/te-symbian.h config/te-tmips.h config/te-vms.c config/te-vxworks.h diff --git a/gas/testsuite/gas/arm/arch4t-eabi.d b/gas/testsuite/gas/arm/arch4t-eabi.d index ad2701d4119..66c0a4deb5c 100644 --- a/gas/testsuite/gas/arm/arch4t-eabi.d +++ b/gas/testsuite/gas/arm/arch4t-eabi.d @@ -2,7 +2,7 @@ # as: -march=armv4t # objdump: -dr --prefix-addresses --show-raw-insn # source: arch4t.s -# target: *-*-*eabi* *-*-symbianelf *-*-nacl* +# target: *-*-*eabi* *-*-nacl* .*: +file format .*arm.* diff --git a/gas/testsuite/gas/arm/arch4t.d b/gas/testsuite/gas/arm/arch4t.d index 2256080cff4..f00f2b8209e 100644 --- a/gas/testsuite/gas/arm/arch4t.d +++ b/gas/testsuite/gas/arm/arch4t.d @@ -2,7 +2,7 @@ # as: -march=armv4t # objdump: -dr --prefix-addresses --show-raw-insn # EABI targets have their own variant. -# notarget: *-*-*eabi* *-*-symbianelf *-*-nacl* +# notarget: *-*-*eabi* *-*-nacl* .*: +file format .*arm.* diff --git a/gas/testsuite/gas/arm/got_prel.d b/gas/testsuite/gas/arm/got_prel.d index 666e9bfec0d..ad415f3afda 100644 --- a/gas/testsuite/gas/arm/got_prel.d +++ b/gas/testsuite/gas/arm/got_prel.d @@ -2,7 +2,7 @@ # source: got_prel.s # as: -march=armv5te -meabi=5 --generate-missing-build-notes=no # readelf: -x 4 -r -# target: *-*-*eabi* *-*-symbianelf *-*-linux-* *-*-elf *-*-nacl* +# target: *-*-*eabi* *-*-linux-* *-*-elf *-*-nacl* Relocation section '.rel.text.foo' at offset .* contains 1 entry: Offset Info Type Sym.Value Sym. Name diff --git a/gas/testsuite/gas/arm/mapdir.d b/gas/testsuite/gas/arm/mapdir.d index f0e898c2efa..b7f2a5cc324 100644 --- a/gas/testsuite/gas/arm/mapdir.d +++ b/gas/testsuite/gas/arm/mapdir.d @@ -2,7 +2,7 @@ #objdump: --syms --special-syms -d #name: ARM Mapping Symbols for .arm/.thumb # This test is only valid on EABI based ports. -#target: *-*-*eabi* *-*-symbianelf *-*-linux-* *-*-elf *-*-nacl* +#target: *-*-*eabi* *-*-linux-* *-*-elf *-*-nacl* #source: mapdir.s diff --git a/gas/testsuite/gas/arm/mapmisc.d b/gas/testsuite/gas/arm/mapmisc.d index ca984efb672..22d58bbdba6 100644 --- a/gas/testsuite/gas/arm/mapmisc.d +++ b/gas/testsuite/gas/arm/mapmisc.d @@ -2,7 +2,7 @@ #objdump: --syms --special-syms -d #name: ARM Mapping Symbols for miscellaneous directives # This test is only valid on EABI based ports. -#target: *-*-*eabi* *-*-symbianelf *-*-linux-* *-*-elf *-*-nacl* +#target: *-*-*eabi* *-*-linux-* *-*-elf *-*-nacl* #source: mapmisc.s diff --git a/gas/testsuite/gas/arm/mapsecs.d b/gas/testsuite/gas/arm/mapsecs.d index be526369319..ffcfd6d0134 100644 --- a/gas/testsuite/gas/arm/mapsecs.d +++ b/gas/testsuite/gas/arm/mapsecs.d @@ -2,7 +2,7 @@ #objdump: --syms --special-syms -d #name: ARM Mapping Symbols with multiple sections # This test is only valid on EABI based ports. -#target: *-*-*eabi* *-*-symbianelf *-*-linux-* *-*-elf *-*-nacl* +#target: *-*-*eabi* *-*-linux-* *-*-elf *-*-nacl* #source: mapsecs.s diff --git a/gas/testsuite/gas/arm/mapshort-eabi.d b/gas/testsuite/gas/arm/mapshort-eabi.d index f46fe9a1b4e..7144ace4b41 100644 --- a/gas/testsuite/gas/arm/mapshort-eabi.d +++ b/gas/testsuite/gas/arm/mapshort-eabi.d @@ -2,7 +2,7 @@ #as: --generate-missing-build-notes=no #name: ARM Mapping Symbols for .short (EABI version) # This test is only valid on EABI based ports. -#target: *-*-*eabi* *-*-symbianelf *-*-linux-* *-*-elf *-*-nacl* +#target: *-*-*eabi* *-*-linux-* *-*-elf *-*-nacl* #source: mapshort.s # Test the generation and use of ARM ELF Mapping Symbols diff --git a/gas/testsuite/gas/arm/thumb-eabi.d b/gas/testsuite/gas/arm/thumb-eabi.d index afe076ba236..c7c8e322273 100644 --- a/gas/testsuite/gas/arm/thumb-eabi.d +++ b/gas/testsuite/gas/arm/thumb-eabi.d @@ -2,7 +2,7 @@ # as: -mcpu=arm7t # objdump: -dr --prefix-addresses --show-raw-insn # source: thumb.s -# target: *-*-*eabi* *-*-symbianelf *-*-nacl* +# target: *-*-*eabi* *-*-nacl* .*: +file format .*arm.* diff --git a/gas/testsuite/gas/arm/thumb.d b/gas/testsuite/gas/arm/thumb.d index 3b1c47fada2..1ac12736bd4 100644 --- a/gas/testsuite/gas/arm/thumb.d +++ b/gas/testsuite/gas/arm/thumb.d @@ -3,7 +3,7 @@ # objdump: -dr --prefix-addresses --show-raw-insn # The arm-aout and arm-pe ports do not support Thumb branch relocations. # EABI targets have their own variant. -# notarget: *-*-pe *-*-*eabi* *-*-symbianelf *-*-nacl* +# notarget: *-*-pe *-*-*eabi* *-*-nacl* .*: +file format .*arm.* diff --git a/gas/testsuite/gas/arm/thumbrel.d b/gas/testsuite/gas/arm/thumbrel.d index 23d0cd44761..bc8644be20c 100644 --- a/gas/testsuite/gas/arm/thumbrel.d +++ b/gas/testsuite/gas/arm/thumbrel.d @@ -1,7 +1,7 @@ #objdump: -sr #as: --generate-missing-build-notes=no # This test is only valid on EABI based ports. -#target: *-*-*eabi* *-*-symbianelf *-*-nacl* +#target: *-*-*eabi* *-*-nacl* .*: file format.* diff --git a/ld/ChangeLog b/ld/ChangeLog index 798b8fd19b2..863f39ed6e8 100644 --- a/ld/ChangeLog +++ b/ld/ChangeLog @@ -1,3 +1,17 @@ +2021-02-09 Alan Modra <amodra@gmail.com> + + * Makefile.am (ALL_EMULATION_SOURCES): Remove earmsymbian.c. + Don't include symbian dep file. + * configure.tgt: Remove arm*-*-symbianelf* entry. + * emulparams/armsymbian.sh: Delete. + * ld.texi: Don't mention symbian. + * scripttempl/armbpabi.sc: Delete. + * testsuite/ld-arm/symbian-seg1.d: Delete. + * testsuite/ld-arm/symbian-seg1.s: Delete. + * testsuite/ld-arm/arm-elf.exp: Don't run symbian-seg1. + * Makefile.in: Regenerate. + * po/BLD-POTFILES.in: Regenerate. + 2021-02-07 H.J. Lu <hongjiu.lu@intel.com> PR ld/27358 diff --git a/ld/Makefile.am b/ld/Makefile.am index 3f5f270d716..3fcaab71dcd 100644 --- a/ld/Makefile.am +++ b/ld/Makefile.am @@ -184,7 +184,6 @@ ALL_EMULATION_SOURCES = \ earmelfb_nbsd.c \ earmnto.c \ earmpe.c \ - earmsymbian.c \ eavr1.c \ eavr2.c \ eavr25.c \ @@ -675,7 +674,6 @@ $(ALL_EMULATION_SOURCES) $(ALL_64_EMULATION_SOURCES): $(GEN_DEPENDS) @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/earmelfb_nbsd.Pc@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/earmnto.Pc@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/earmpe.Pc@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/earmsymbian.Pc@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eavr1.Pc@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eavr2.Pc@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eavr25.Pc@am__quote@ diff --git a/ld/Makefile.in b/ld/Makefile.in index e50dffe0891..27b18c1185e 100644 --- a/ld/Makefile.in +++ b/ld/Makefile.in @@ -674,7 +674,6 @@ ALL_EMULATION_SOURCES = \ earmelfb_nbsd.c \ earmnto.c \ earmpe.c \ - earmsymbian.c \ eavr1.c \ eavr2.c \ eavr25.c \ @@ -1279,7 +1278,6 @@ distclean-compile: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/earmelfb_nbsd.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/earmnto.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/earmpe.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/earmsymbian.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eavr1.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eavr2.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eavr25.Po@am__quote@ @@ -2334,7 +2332,6 @@ $(ALL_EMULATION_SOURCES) $(ALL_64_EMULATION_SOURCES): $(GEN_DEPENDS) @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/earmelfb_nbsd.Pc@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/earmnto.Pc@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/earmpe.Pc@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/earmsymbian.Pc@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eavr1.Pc@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eavr2.Pc@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eavr25.Pc@am__quote@ diff --git a/ld/configure.tgt b/ld/configure.tgt index ee00aa3bca8..6205d7c9872 100644 --- a/ld/configure.tgt +++ b/ld/configure.tgt @@ -151,7 +151,6 @@ armeb-*-elf | armeb-*-eabi*) arm-*-elf | arm*-*-eabi* | arm-*-rtems* | arm-*-genode*) targ_emul=armelf ;; -arm*-*-symbianelf*) targ_emul=armsymbian;; arm-*-kaos*) targ_emul=armelf ;; arm9e-*-elf) targ_emul=armelf diff --git a/ld/emulparams/armsymbian.sh b/ld/emulparams/armsymbian.sh deleted file mode 100644 index f6431658199..00000000000 --- a/ld/emulparams/armsymbian.sh +++ /dev/null @@ -1,25 +0,0 @@ -source_sh ${srcdir}/emulparams/armelf.sh -SCRIPT_NAME="armbpabi" -GENERATE_COMBRELOC_SCRIPT=1 -OUTPUT_FORMAT="elf32-littlearm-symbian" -BIG_OUTPUT_FORMAT="elf32-bigarm-symbian" -LITTLE_OUTPUT_FORMAT="$OUTPUT_FORMAT" -TARGET1_IS_REL=1 -TARGET2_TYPE=abs -# On BPABI systems, program headers should not be mapped. -EMBEDDED=yes - -# As for armelf.sh, but add the SymbianOS-specific -# .ARM.exidx$${Base,Limit} symbols. -OTHER_READONLY_SECTIONS=" - .ARM.extab ${RELOCATING-0} : { *(.ARM.extab${RELOCATING+* .gnu.linkonce.armextab.*}) } - .ARM.exidx ${RELOCATING-0} : - { - ${RELOCATING+PROVIDE_HIDDEN (.ARM.exidx\$\$Base = .);} - ${RELOCATING+PROVIDE_HIDDEN (__exidx_start = .);} - *(.ARM.exidx${RELOCATING+* .gnu.linkonce.armexidx.*}) - ${RELOCATING+PROVIDE_HIDDEN (__exidx_end = .);} - ${RELOCATING+PROVIDE_HIDDEN (.ARM.exidx\$\$Limit = .);} - }" - -MAXPAGESIZE="CONSTANT (MAXPAGESIZE)" diff --git a/ld/ld.texi b/ld/ld.texi index 0f34d1fbdf6..bfe6c5994a1 100644 --- a/ld/ld.texi +++ b/ld/ld.texi @@ -7316,7 +7316,7 @@ meanings, and target defaults are as follows: @item rel @samp{R_ARM_REL32} (arm*-*-elf, arm*-*-eabi) @item abs -@samp{R_ARM_ABS32} (arm*-*-symbianelf) +@samp{R_ARM_ABS32} @item got-rel @samp{R_ARM_GOT_PREL} (arm*-*-linux, arm*-*-*bsd) @end table @@ -7358,9 +7358,6 @@ situations. Currently it is used to perform calls via the PLT from Thumb code using BLX rather than using BX and a mode-switching stub before each PLT entry. This should lead to such calls executing slightly faster. -This option is enabled implicitly for SymbianOS, so there is no need to -specify it if you are using that target. - @cindex VFP11_DENORM_FIX @kindex --vfp11-denorm-fix The @samp{--vfp11-denorm-fix} switch enables a link-time workaround for a diff --git a/ld/po/BLD-POTFILES.in b/ld/po/BLD-POTFILES.in index 81d489f3f32..ba9f4279c4c 100644 --- a/ld/po/BLD-POTFILES.in +++ b/ld/po/BLD-POTFILES.in @@ -42,7 +42,6 @@ earmelfb_nacl.c earmelfb_nbsd.c earmnto.c earmpe.c -earmsymbian.c eavr1.c eavr2.c eavr25.c diff --git a/ld/scripttempl/armbpabi.sc b/ld/scripttempl/armbpabi.sc deleted file mode 100644 index 57ce8d3fc15..00000000000 --- a/ld/scripttempl/armbpabi.sc +++ /dev/null @@ -1,417 +0,0 @@ -# This variant of elf.sc is used for ARM BPABI platforms, like Symbian -# OS, where a separate postlinker will operated on the generated -# executable or shared object. See elf.sc for configuration variables -# that apply; only BPABI-specific variables will be noted here. -# -# Copyright (C) 2014-2021 Free Software Foundation, Inc. -# -# Copying and distribution of this file, with or without modification, -# are permitted in any medium without royalty provided the copyright -# notice and this notice are preserved. - -test -z "$ENTRY" && ENTRY=_start -test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT} -test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT} -if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi -test -z "${ELFSIZE}" && ELFSIZE=32 -test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8" -test "$LD_FLAG" = "N" && DATA_ADDR=. -test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE="" -test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE="" -test -n "$RELRO_NOW" && unset SEPARATE_GOTPLT -DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))" -DATA_SEGMENT_RELRO_END="" -DATA_SEGMENT_RELRO_GOTPLT_END="" -DATA_SEGMENT_END="" -if test -n "${COMMONPAGESIZE}"; then - DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})" - DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);" - if test -n "${SEPARATE_GOTPLT}"; then - DATA_SEGMENT_RELRO_GOTPLT_END=". = DATA_SEGMENT_RELRO_END (. + ${SEPARATE_GOTPLT});" - else - DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (.);" - fi -fi -INTERP=".interp 0 : { *(.interp) }" -PLT=".plt ${RELOCATING-0} : { *(.plt) }" -RODATA=".rodata ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }" -DATARELRO=".data.rel.ro : { *(.data.rel.ro.local) *(.data.rel.ro .data.rel.ro.*) }" -DISCARDED="/DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }" -if test -z "${NO_SMALL_DATA}"; then - SBSS=".sbss ${RELOCATING-0} : - { - ${RELOCATING+PROVIDE (__sbss_start = .);} - ${RELOCATING+PROVIDE (___sbss_start = .);} - ${RELOCATING+*(.dynsbss)} - *(.sbss${RELOCATING+ .sbss.* .gnu.linkonce.sb.*}) - ${RELOCATING+*(.scommon)} - ${RELOCATING+PROVIDE (__sbss_end = .);} - ${RELOCATING+PROVIDE (___sbss_end = .);} - }" - SBSS2=".sbss2 ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }" - SDATA="/* We want the small data sections together, so single-instruction offsets - can access them all, and initialized data all before uninitialized, so - we can shorten the on-disk segment size. */ - .sdata ${RELOCATING-0} : - { - ${RELOCATING+${SDATA_START_SYMBOLS}} - *(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*}) - }" - SDATA2=".sdata2 ${RELOCATING-0} : { *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*}) }" - REL_SDATA=".rel.sdata ${RELOCATING-0} : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) } - .rela.sdata ${RELOCATING-0} : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }" - REL_SBSS=".rel.sbss ${RELOCATING-0} : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) } - .rela.sbss ${RELOCATING-0} : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }" - REL_SDATA2=".rel.sdata2 ${RELOCATING-0} : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) } - .rela.sdata2 ${RELOCATING-0} : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }" - REL_SBSS2=".rel.sbss2 ${RELOCATING-0} : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) } - .rela.sbss2 ${RELOCATING-0} : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }" -else - NO_SMALL_DATA=" " -fi -test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" " -INIT_ARRAY=".init_array ${RELOCATING-0} : - { - /* SymbianOS uses this symbol. */ - ${RELOCATING+PROVIDE (SHT\$\$INIT_ARRAY\$\$Base = .);} - ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__init_array_start = .);}} - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__init_array_end = .);}} - /* SymbianOS uses this symbol. */ - ${RELOCATING+PROVIDE (SHT\$\$INIT_ARRAY\$\$Limit = .);} - }" -FINI_ARRAY=".fini_array ${RELOCATING-0} : - { - ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__fini_array_start = .);}} - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array)) - ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__fini_array_end = .);}} - }" -CTOR=".ctors ${CONSTRUCTING-0} : - { - ${CONSTRUCTING+${CTOR_START}} - /* gcc uses crtbegin.o to find the start of - the constructors, so we make sure it is - first. Because this is a wildcard, it - doesn't matter if the user does not - actually link against crtbegin.o; the - linker won't look for a file to match a - wildcard. The wildcard also means that it - doesn't matter which directory crtbegin.o - is in. */ - - KEEP (*crtbegin.o(.ctors)) - KEEP (*crtbegin?.o(.ctors)) - - /* We don't want to include the .ctor section from - the crtend.o file until after the sorted ctors. - The .ctor section from the crtend file contains the - end of ctors marker and it must be last */ - - KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*(.ctors)) - ${CONSTRUCTING+${CTOR_END}} - }" -DTOR=".dtors ${CONSTRUCTING-0} : - { - ${CONSTRUCTING+${DTOR_START}} - KEEP (*crtbegin.o(.dtors)) - KEEP (*crtbegin?.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*(.dtors)) - ${CONSTRUCTING+${DTOR_END}} - }" -STACK=" .stack ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} : - { - ${RELOCATING+_stack = .;} - *(.stack) - }" - -TEXT_START_ADDR="SEGMENT_START(\"text\", ${TEXT_START_ADDR})" -SHLIB_TEXT_START_ADDR="SEGMENT_START(\"text\", ${SHLIB_TEXT_START_ADDR:-0})" -DATA_ADDR="SEGMENT_START(\"data\", ${DATA_ADDR-${DATA_SEGMENT_ALIGN}})" -SHLIB_DATA_ADDR="SEGMENT_START(\"data\", ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}})" - -# If this is for an embedded system, don't add SIZEOF_HEADERS. -if [ -z "$EMBEDDED" ]; then - test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS" - SHLIB_BASE_ADDRESS="${SHLIB_TEXT_START_ADDR} + SIZEOF_HEADERS" -else - test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}" - SHLIB_BASE_ADDRESS="${SHLIB_TEXT_START_ADDR}" -fi - -cat <<EOF -/* Copyright (C) 2014-2021 Free Software Foundation, Inc. - - Copying and distribution of this script, with or without modification, - are permitted in any medium without royalty provided the copyright - notice and this notice are preserved. */ - -OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}", - "${LITTLE_OUTPUT_FORMAT}") -OUTPUT_ARCH(${OUTPUT_ARCH}) -EOF - -test -n "${RELOCATING}" && cat <<EOF -ENTRY(${ENTRY}) - -${LIB_SEARCH_DIRS} -/* Do we need any of these for elf? - __DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}} */ -${EXECUTABLE_SYMBOLS} -${INPUT_FILES} - -/* ARM's proprietary toolchain generate these symbols to match the start - and end of particular sections of the image. SymbianOS uses these - symbols. We provide them for compatibility with ARM's toolchains. - These symbols should be bound locally; each shared object may define - its own version of these symbols. */ - -VERSION -{ - /* Give these a dummy version to work around linker lameness. - The name used shouldn't matter as these are all local symbols. */ - __GNU { - local: - Image\$\$ER_RO\$\$Base; - Image\$\$ER_RO\$\$Limit; - SHT\$\$INIT_ARRAY\$\$Base; - SHT\$\$INIT_ARRAY\$\$Limit; - .ARM.exidx\$\$Base; - .ARM.exidx\$\$Limit; - }; -} - -EOF - -cat <<EOF -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR});}}} - - ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+ . = ${TEXT_BASE_ADDRESS};}}} - ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_BASE_ADDRESS};}} - ${CREATE_PIE+${RELOCATING+. = ${SHLIB_BASE_ADDRESS};}} - - /* Define Image\$\$ER_RO\$\$Base. */ - ${RELOCATING+PROVIDE (Image\$\$ER_RO\$\$Base = .);} - - ${INITIAL_READONLY_SECTIONS} - -EOF -cat <<EOF - .init ${RELOCATING-0} : - { - ${RELOCATING+${INIT_START}} - KEEP (*(SORT_NONE(.init))) - ${RELOCATING+${INIT_END}} - } =${NOP-0} - .text ${RELOCATING-0} : - { - ${RELOCATING+${TEXT_START_SYMBOLS}} - *(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*}) - /* .gnu.warning sections are handled specially by elf.em. */ - *(.gnu.warning) - ${RELOCATING+${OTHER_TEXT_SECTIONS}} - } =${NOP-0} - .fini ${RELOCATING-0} : - { - ${RELOCATING+${FINI_START}} - KEEP (*(SORT_NONE(.fini))) - ${RELOCATING+${FINI_END}} - } =${NOP-0} - /* The SymbianOS kernel requires that the PLT go at the end of the - text section. */ - ${DATA_PLT-${BSS_PLT-${PLT}}} - ${RELOCATING+PROVIDE (__etext = .);} - ${RELOCATING+PROVIDE (_etext = .);} - ${RELOCATING+PROVIDE (etext = .);} - - /* Define Image\$\$ER_RO\$\$Limit. */ - ${RELOCATING+PROVIDE (Image\$\$ER_RO\$\$Limit = .);} - - ${WRITABLE_RODATA-${RODATA}} - .rodata1 ${RELOCATING-0} : { *(.rodata1) } - ${CREATE_SHLIB-${SDATA2}} - ${CREATE_SHLIB-${SBSS2}} - - /* On SymbianOS, put .init_array and friends in the read-only - segment; there is no runtime relocation applied to these - arrays. */ - - .preinit_array ${RELOCATING-0} : - { - ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__preinit_array_start = .);}} - KEEP (*(.preinit_array)) - ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__preinit_array_end = .);}} - } - ${RELOCATING+${INIT_ARRAY}} - ${RELOCATING+${FINI_ARRAY}} - - ${OTHER_READONLY_SECTIONS} - .eh_frame_hdr ${RELOCATING-0} : { *(.eh_frame_hdr) } - .eh_frame ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) } - .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.gcc_except_table${RELOCATING+ .gcc_except_table.*})) } - - /* Adjust the address for the data segment. We want to adjust up to - the same address within the page on the next page up. */ - ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR};}}} - ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR};}} - ${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR};}} - - /* Exception handling */ - .eh_frame ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) } - .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.gcc_except_table${RELOCATING+ .gcc_except_table.*})) } - - /* Thread Local Storage sections */ - .tdata ${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) } - .tbss ${RELOCATING-0} : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} } - - ${RELOCATING+${CTOR}} - ${RELOCATING+${DTOR}} - .jcr ${RELOCATING-0} : { KEEP (*(.jcr)) } - - ${RELOCATING+${DATARELRO}} - ${OTHER_RELRO_SECTIONS} - ${RELOCATING+${DATA_SEGMENT_RELRO_END}} - - ${DATA_PLT+${PLT_BEFORE_GOT-${PLT}}} - - .data ${RELOCATING-0} : - { - ${RELOCATING+${DATA_START_SYMBOLS}} - *(.data${RELOCATING+ .data.* .gnu.linkonce.d.*}) - ${CONSTRUCTING+SORT(CONSTRUCTORS)} - } - .data1 ${RELOCATING-0} : { *(.data1) } - ${WRITABLE_RODATA+${RODATA}} - ${OTHER_READWRITE_SECTIONS} - ${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}} - ${CREATE_SHLIB+${SDATA2}} - ${CREATE_SHLIB+${SBSS2}} - ${SDATA} - ${OTHER_SDATA_SECTIONS} - ${RELOCATING+_edata = .;} - ${RELOCATING+PROVIDE (edata = .);} - ${RELOCATING+. = DEFINED(__bss_segment_start) ? __bss_segment_start : .;} - ${RELOCATING+__bss_start = .;} - ${RELOCATING+${OTHER_BSS_SYMBOLS}} - ${SBSS} - ${BSS_PLT+${PLT}} - .bss ${RELOCATING-0} : - { - ${RELOCATING+*(.dynbss)} - *(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*}) - ${RELOCATING+*(COMMON) - /* Align here to ensure that the .bss section occupies space up to - _end. Align after .bss to ensure correct alignment even if the - .bss section disappears because there are no input sections. */ - . = ALIGN(${ALIGNMENT});} - } - ${RELOCATING+${OTHER_BSS_END_SYMBOLS}} - ${RELOCATING+. = ALIGN(${ALIGNMENT});} - ${RELOCATING+${OTHER_END_SYMBOLS}} - ${RELOCATING+_end = .;} - ${RELOCATING+PROVIDE (end = .);} - ${RELOCATING+${DATA_SEGMENT_END}} - ${STACK_ADDR+${STACK}} - - /* These sections are not mapped under the BPABI. */ - .dynamic 0 : { *(.dynamic) } - .hash 0 : { *(.hash) } - .dynsym 0 : { *(.dynsym) } - .dynstr 0 : { *(.dynstr) } - .gnu.version 0 : { *(.gnu.version) } - .gnu.version_d 0: { *(.gnu.version_d) } - .gnu.version_r 0: { *(.gnu.version_r) } - ${CREATE_SHLIB-${INTERP}} - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - - .comment 0 : { *(.comment) } -EOF - -. $srcdir/scripttempl/DWARF.sc - -cat <<EOF - ${OTHER_SECTIONS} - ${RELOCATING+${OTHER_SYMBOLS}} - ${RELOCATING+${DISCARDED}} -EOF - -# These relocations sections are part of the read-only segment in SVR4 -# executables, but are not mapped in BPABI executables. -if [ "x$COMBRELOC" = x ]; then - COMBRELOCCAT=cat -else - COMBRELOCCAT="cat > $COMBRELOC" -fi -eval $COMBRELOCCAT <<EOF - .rel.init 0 : { *(.rel.init) } - .rela.init 0 : { *(.rela.init) } - .rel.text 0 : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) } - .rela.text 0 : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) } - .rel.fini 0 : { *(.rel.fini) } - .rela.fini 0 : { *(.rela.fini) } - .rel.rodata 0 : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) } - .rela.rodata 0 : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) } - ${OTHER_READONLY_RELOC_SECTIONS} - .rel.data.rel.ro 0 : { *(.rel.data.rel.ro${RELOCATING+ .rel.data.rel.ro.*}) } - .rela.data.rel.ro 0 : { *(.rela.data.rel.ro${RELOCATING+ .rela.data.rel.ro.*}) } - .rel.data 0 : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) } - .rela.data 0 : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) } - .rel.tdata 0 : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) } - .rela.tdata 0 : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) } - .rel.tbss 0 : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) } - .rela.tbss 0 : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) } - .rel.ctors 0 : { *(.rel.ctors) } - .rela.ctors 0 : { *(.rela.ctors) } - .rel.dtors 0 : { *(.rel.dtors) } - .rela.dtors 0 : { *(.rela.dtors) } - ${REL_SDATA} - ${REL_SBSS} - ${REL_SDATA2} - ${REL_SBSS2} - .rel.bss 0 : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) } - .rela.bss 0 : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) } - .rel.init_array 0 : { *(.rel.init_array) } - .rela.init_array 0 : { *(.rela.init_array) } - .rel.fini_array 0 : { *(.rel.fini_array) } - .rela.fini_array 0 : { *(.rela.fini_array) } -EOF -if [ -n "$COMBRELOC" ]; then -cat <<EOF - .rel.dyn 0 : - { -EOF -sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/ \1/' $COMBRELOC -cat <<EOF - } - .rela.dyn 0 : - { -EOF -sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/ \1/' $COMBRELOC -cat <<EOF - } -EOF -fi -cat <<EOF - .rel.plt 0 : { *(.rel.plt) } - .rela.plt 0 : { *(.rela.plt) } - ${OTHER_PLT_RELOC_SECTIONS} - .rel.other 0 : { *(.rel.*) } - .rela.other 0 : { *(.rela.*) } - .reli.other 0 : { *(.reli.*) } -} -EOF diff --git a/ld/testsuite/ld-arm/arm-elf.exp b/ld/testsuite/ld-arm/arm-elf.exp index 47d422526c8..ea1d1e1345a 100644 --- a/ld/testsuite/ld-arm/arm-elf.exp +++ b/ld/testsuite/ld-arm/arm-elf.exp @@ -53,10 +53,6 @@ if {[istarget "arm-*-vxworks"]} { run_dump_test "emit-relocs1-vxworks" } -if { [istarget "arm*-*-symbianelf*"] } { - run_dump_test "symbian-seg1" -} - # Exclude non-ARM-ELF targets. if { ![is_elf_format] || ![istarget "arm*-*-*"] } { diff --git a/ld/testsuite/ld-arm/symbian-seg1.d b/ld/testsuite/ld-arm/symbian-seg1.d deleted file mode 100644 index 21d8a009156..00000000000 --- a/ld/testsuite/ld-arm/symbian-seg1.d +++ /dev/null @@ -1,8 +0,0 @@ -#source: symbian-seg1.s -#ld: -Ttext 0x10000 -Tdata 0x400000 -#objdump: -dR -#... - +10000: 00400000 .word 0x00400000 - +10000: R_ARM_RELATIVE .data - +10004: 00010008 .word 0x00010008 - +10004: R_ARM_RELATIVE .text diff --git a/ld/testsuite/ld-arm/symbian-seg1.s b/ld/testsuite/ld-arm/symbian-seg1.s deleted file mode 100644 index 8f893a251b0..00000000000 --- a/ld/testsuite/ld-arm/symbian-seg1.s +++ /dev/null @@ -1,13 +0,0 @@ - .text - .globl _start -_start: - .word datavar - .word rodatavar - - .section ".rodata", "a" -rodatavar: - .word 0 - - .section ".data", "aw" -datavar: - .word 0 |