Sync ZLIB with FSF GCC sources, bringing in version 1.2.11.

- Fix deflate stored bug when pulling last block from window
- Permit immediate deflateParams changes before any deflate input

34 files changed, 87 insertions, 68 deletions

diff --git a/zlib/CMakeLists.txt b/zlib/CMakeLists.txt
index 1a954a64038..0fe939df689 100644
--- a/zlib/CMakeLists.txt
+++ b/zlib/CMakeLists.txt
@@ -3,7 +3,7 @@ set(CMAKE_ALLOW_LOOSE_LOOP_CONSTRUCTS ON)
 
 project(zlib C)
 
-set(VERSION "1.2.10")
+set(VERSION "1.2.11")
 
 option(ASM686 "Enable building i686 assembly implementation")
 option(AMD64 "Enable building amd64 assembly implementation")
diff --git a/zlib/ChangeLog b/zlib/ChangeLog
index 7b3da232ac5..eb7b2a97c26 100644
--- a/zlib/ChangeLog
+++ b/zlib/ChangeLog
@@ -1,6 +1,10 @@
 
                 ChangeLog file for zlib
 
+Changes in 1.2.11 (15 Jan 2017)
+- Fix deflate stored bug when pulling last block from window
+- Permit immediate deflateParams changes before any deflate input
+
 Changes in 1.2.10 (2 Jan 2017)
 - Avoid warnings on snprintf() return value
 - Fix bug in deflate_stored() for zero-length input
diff --git a/zlib/ChangeLog.bin-gdb b/zlib/ChangeLog.bin-gdb
index 10f514fcdba..0b4fd143d81 100644
--- a/zlib/ChangeLog.bin-gdb
+++ b/zlib/ChangeLog.bin-gdb
@@ -1,3 +1,7 @@
+2017-02-20  Nick Clifton  <nickc@redhat.com>
+
+	Sync with FSF GCC sources, bringing in version 1.2.11.
+
 2017-01-23  Nick Clifton  <nickc@redhat.com>
 
 	* configure.ac: Restore old behaviour of only enabling multilibs
diff --git a/zlib/ChangeLog.gcj b/zlib/ChangeLog.gcj
index 93bb7a3eb15..47928119dfd 100644
--- a/zlib/ChangeLog.gcj
+++ b/zlib/ChangeLog.gcj
@@ -1,3 +1,8 @@
+2017-01-22  Matthias Klose  <doko@ubuntu.com>
+
+	* Import zlib 1.2.11.
+	* configure: Regenerate.
+
 2017-01-13  Matthias Klose  <doko@ubuntu.com>
 
 	* Import zlib 1.2.10.
diff --git a/zlib/README b/zlib/README
index 92f8070ca62..92e9d5c64a7 100644
--- a/zlib/README
+++ b/zlib/README
@@ -3,7 +3,7 @@ shipped with GCC as convenience.
 
 ZLIB DATA COMPRESSION LIBRARY
 
-zlib 1.2.10 is a general purpose data compression library.  All the code is
+zlib 1.2.11 is a general purpose data compression library.  All the code is
 thread safe.  The data format used by the zlib library is described by RFCs
 (Request for Comments) 1950 to 1952 in the files
 http://tools.ietf.org/html/rfc1950 (zlib format), rfc1951 (deflate format) and
@@ -34,7 +34,7 @@ Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan.  1997
 issue of Dr.  Dobb's Journal; a copy of the article is available at
 http://marknelson.us/1997/01/01/zlib-engine/ .
 
-The changes made in version 1.2.10 are documented in the file ChangeLog.
+The changes made in version 1.2.11 are documented in the file ChangeLog.
 
 Unsupported third party contributions are provided in directory contrib/ .
 
diff --git a/zlib/contrib/delphi/ZLib.pas b/zlib/contrib/delphi/ZLib.pas
index e9d72f021da..060e1991186 100644
--- a/zlib/contrib/delphi/ZLib.pas
+++ b/zlib/contrib/delphi/ZLib.pas
@@ -152,7 +152,7 @@ procedure DecompressToUserBuf(const InBuf: Pointer; InBytes: Integer;
   const OutBuf: Pointer; BufSize: Integer);
 
 const
-  zlib_version = '1.2.10';
+  zlib_version = '1.2.11';
 
 type
   EZlibError = class(Exception);
diff --git a/zlib/contrib/dotzlib/DotZLib/UnitTests.cs b/zlib/contrib/dotzlib/DotZLib/UnitTests.cs
index a0e39857cc8..44f76332ba0 100644
--- a/zlib/contrib/dotzlib/DotZLib/UnitTests.cs
+++ b/zlib/contrib/dotzlib/DotZLib/UnitTests.cs
@@ -156,7 +156,7 @@ namespace DotZLibTests
         public void Info_Version()

         {

             Info info = new Info();

-            Assert.AreEqual("1.2.10", Info.Version);

+            Assert.AreEqual("1.2.11", Info.Version);

             Assert.AreEqual(32, info.SizeOfUInt);

             Assert.AreEqual(32, info.SizeOfULong);

             Assert.AreEqual(32, info.SizeOfPointer);

diff --git a/zlib/contrib/infback9/inftree9.c b/zlib/contrib/infback9/inftree9.c
index ea5604731a7..5f4a76798d8 100644
--- a/zlib/contrib/infback9/inftree9.c
+++ b/zlib/contrib/infback9/inftree9.c
@@ -9,7 +9,7 @@
 #define MAXBITS 15
 
 const char inflate9_copyright[] =
-   " inflate9 1.2.10 Copyright 1995-2017 Mark Adler ";
+   " inflate9 1.2.11 Copyright 1995-2017 Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -64,7 +64,7 @@ unsigned short FAR *work;
     static const unsigned short lext[31] = { /* Length codes 257..285 extra */
         128, 128, 128, 128, 128, 128, 128, 128, 129, 129, 129, 129,
         130, 130, 130, 130, 131, 131, 131, 131, 132, 132, 132, 132,
-        133, 133, 133, 133, 144, 192, 202};
+        133, 133, 133, 133, 144, 77, 202};
     static const unsigned short dbase[32] = { /* Distance codes 0..31 base */
         1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49,
         65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073,
diff --git a/zlib/contrib/minizip/configure.ac b/zlib/contrib/minizip/configure.ac
index bbb2283a7d7..5b11970977f 100644
--- a/zlib/contrib/minizip/configure.ac
+++ b/zlib/contrib/minizip/configure.ac
@@ -1,7 +1,7 @@
 #                                               -*- Autoconf -*-
 # Process this file with autoconf to produce a configure script.
 
-AC_INIT([minizip], [1.2.10], [bugzilla.redhat.com])
+AC_INIT([minizip], [1.2.11], [bugzilla.redhat.com])
 AC_CONFIG_SRCDIR([minizip.c])
 AM_INIT_AUTOMAKE([foreign])
 LT_INIT
diff --git a/zlib/contrib/pascal/zlibpas.pas b/zlib/contrib/pascal/zlibpas.pas
index 2330898c418..a0dff11b505 100644
--- a/zlib/contrib/pascal/zlibpas.pas
+++ b/zlib/contrib/pascal/zlibpas.pas
@@ -10,7 +10,7 @@ unit zlibpas;
 interface
 
 const
-  ZLIB_VERSION = '1.2.10';
+  ZLIB_VERSION = '1.2.11';
   ZLIB_VERNUM  = $12a0;
 
 type
diff --git a/zlib/contrib/vstudio/readme.txt b/zlib/contrib/vstudio/readme.txt
index 98d8a05a5b4..f67eae8678a 100644
--- a/zlib/contrib/vstudio/readme.txt
+++ b/zlib/contrib/vstudio/readme.txt
@@ -1,4 +1,4 @@
-Building instructions for the DLL versions of Zlib 1.2.10

+Building instructions for the DLL versions of Zlib 1.2.11

 ========================================================

 

 This directory contains projects that build zlib and minizip using

diff --git a/zlib/contrib/vstudio/vc10/zlib.rc b/zlib/contrib/vstudio/vc10/zlib.rc
index f1c19bcec08..fee177a71cb 100644
--- a/zlib/contrib/vstudio/vc10/zlib.rc
+++ b/zlib/contrib/vstudio/vc10/zlib.rc
@@ -2,8 +2,8 @@
 

 #define IDR_VERSION1  1

 IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE

-  FILEVERSION	 1, 2, 10, 0

-  PRODUCTVERSION 1, 2, 10, 0

+  FILEVERSION	 1, 2, 11, 0

+  PRODUCTVERSION 1, 2, 11, 0

   FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK

   FILEFLAGS	0

   FILEOS	VOS_DOS_WINDOWS32

@@ -17,7 +17,7 @@ BEGIN
 

     BEGIN

       VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"

-      VALUE "FileVersion",	"1.2.10\0"

+      VALUE "FileVersion",	"1.2.11\0"

       VALUE "InternalName",	"zlib\0"

       VALUE "OriginalFilename",	"zlibwapi.dll\0"

       VALUE "ProductName",	"ZLib.DLL\0"

diff --git a/zlib/contrib/vstudio/vc11/zlib.rc b/zlib/contrib/vstudio/vc11/zlib.rc
index f1c19bcec08..fee177a71cb 100644
--- a/zlib/contrib/vstudio/vc11/zlib.rc
+++ b/zlib/contrib/vstudio/vc11/zlib.rc
@@ -2,8 +2,8 @@
 

 #define IDR_VERSION1  1

 IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE

-  FILEVERSION	 1, 2, 10, 0

-  PRODUCTVERSION 1, 2, 10, 0

+  FILEVERSION	 1, 2, 11, 0

+  PRODUCTVERSION 1, 2, 11, 0

   FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK

   FILEFLAGS	0

   FILEOS	VOS_DOS_WINDOWS32

@@ -17,7 +17,7 @@ BEGIN
 

     BEGIN

       VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"

-      VALUE "FileVersion",	"1.2.10\0"

+      VALUE "FileVersion",	"1.2.11\0"

       VALUE "InternalName",	"zlib\0"

       VALUE "OriginalFilename",	"zlibwapi.dll\0"

       VALUE "ProductName",	"ZLib.DLL\0"

diff --git a/zlib/contrib/vstudio/vc12/zlib.rc b/zlib/contrib/vstudio/vc12/zlib.rc
index ef3829898b6..c4e4b016e9c 100644
--- a/zlib/contrib/vstudio/vc12/zlib.rc
+++ b/zlib/contrib/vstudio/vc12/zlib.rc
@@ -2,8 +2,8 @@
 
 #define IDR_VERSION1  1
 IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
-  FILEVERSION	 1, 2, 10, 0
-  PRODUCTVERSION 1, 2, 10, 0
+  FILEVERSION	 1, 2, 11, 0
+  PRODUCTVERSION 1, 2, 11, 0
   FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
   FILEFLAGS	0
   FILEOS	VOS_DOS_WINDOWS32
@@ -17,7 +17,7 @@ BEGIN
 
     BEGIN
       VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
-      VALUE "FileVersion",	"1.2.10\0"
+      VALUE "FileVersion",	"1.2.11\0"
       VALUE "InternalName",	"zlib\0"
       VALUE "OriginalFilename",	"zlibwapi.dll\0"
       VALUE "ProductName",	"ZLib.DLL\0"
diff --git a/zlib/contrib/vstudio/vc14/zlib.rc b/zlib/contrib/vstudio/vc14/zlib.rc
index ef3829898b6..c4e4b016e9c 100644
--- a/zlib/contrib/vstudio/vc14/zlib.rc
+++ b/zlib/contrib/vstudio/vc14/zlib.rc
@@ -2,8 +2,8 @@
 
 #define IDR_VERSION1  1
 IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
-  FILEVERSION	 1, 2, 10, 0
-  PRODUCTVERSION 1, 2, 10, 0
+  FILEVERSION	 1, 2, 11, 0
+  PRODUCTVERSION 1, 2, 11, 0
   FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
   FILEFLAGS	0
   FILEOS	VOS_DOS_WINDOWS32
@@ -17,7 +17,7 @@ BEGIN
 
     BEGIN
       VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
-      VALUE "FileVersion",	"1.2.10\0"
+      VALUE "FileVersion",	"1.2.11\0"
       VALUE "InternalName",	"zlib\0"
       VALUE "OriginalFilename",	"zlibwapi.dll\0"
       VALUE "ProductName",	"ZLib.DLL\0"
diff --git a/zlib/contrib/vstudio/vc9/zlib.rc b/zlib/contrib/vstudio/vc9/zlib.rc
index f1c19bcec08..fee177a71cb 100644
--- a/zlib/contrib/vstudio/vc9/zlib.rc
+++ b/zlib/contrib/vstudio/vc9/zlib.rc
@@ -2,8 +2,8 @@
 

 #define IDR_VERSION1  1

 IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE

-  FILEVERSION	 1, 2, 10, 0

-  PRODUCTVERSION 1, 2, 10, 0

+  FILEVERSION	 1, 2, 11, 0

+  PRODUCTVERSION 1, 2, 11, 0

   FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK

   FILEFLAGS	0

   FILEOS	VOS_DOS_WINDOWS32

@@ -17,7 +17,7 @@ BEGIN
 

     BEGIN

       VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"

-      VALUE "FileVersion",	"1.2.10\0"

+      VALUE "FileVersion",	"1.2.11\0"

       VALUE "InternalName",	"zlib\0"

       VALUE "OriginalFilename",	"zlibwapi.dll\0"

       VALUE "ProductName",	"ZLib.DLL\0"

diff --git a/zlib/deflate.c b/zlib/deflate.c
index faff1b79d46..586cd1556b8 100644
--- a/zlib/deflate.c
+++ b/zlib/deflate.c
@@ -52,7 +52,7 @@
 #include "deflate.h"
 
 const char deflate_copyright[] =
-   " deflate 1.2.10 Copyright 1995-2017 Jean-loup Gailly and Mark Adler ";
+   " deflate 1.2.11 Copyright 1995-2017 Jean-loup Gailly and Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -586,7 +586,8 @@ int ZEXPORT deflateParams(strm, level, strategy)
     }
     func = configuration_table[s->level].func;
 
-    if ((strategy != s->strategy || func != configuration_table[level].func)) {
+    if ((strategy != s->strategy || func != configuration_table[level].func) &&
+        s->high_water) {
         /* Flush the last buffer: */
         int err = deflate(strm, Z_BLOCK);
         if (err == Z_STREAM_ERROR)
@@ -1671,8 +1672,6 @@ local block_state deflate_stored(s, flush)
             len = left + s->strm->avail_in;     /* limit len to the input */
         if (len > have)
             len = have;                         /* limit len to the output */
-        if (left > len)
-            left = len;                         /* limit window pull to len */
 
         /* If the stored block would be less than min_block in length, or if
          * unable to copy all of the available input when flushing, then try
@@ -1681,13 +1680,13 @@ local block_state deflate_stored(s, flush)
          */
         if (len < min_block && ((len == 0 && flush != Z_FINISH) ||
                                 flush == Z_NO_FLUSH ||
-                                len - left != s->strm->avail_in))
+                                len != left + s->strm->avail_in))
             break;
 
         /* Make a dummy stored block in pending to get the header bytes,
          * including any pending bits. This also updates the debugging counts.
          */
-        last = flush == Z_FINISH && len - left == s->strm->avail_in ? 1 : 0;
+        last = flush == Z_FINISH && len == left + s->strm->avail_in ? 1 : 0;
         _tr_stored_block(s, (char *)0, 0L, last);
 
         /* Replace the lengths in the dummy stored block with len. */
@@ -1699,14 +1698,16 @@ local block_state deflate_stored(s, flush)
         /* Write the stored block header bytes. */
         flush_pending(s->strm);
 
-        /* Update debugging counts for the data about to be copied. */
 #ifdef ZLIB_DEBUG
+        /* Update debugging counts for the data about to be copied. */
         s->compressed_len += len << 3;
         s->bits_sent += len << 3;
 #endif
 
         /* Copy uncompressed bytes from the window to next_out. */
         if (left) {
+            if (left > len)
+                left = len;
             zmemcpy(s->strm->next_out, s->window + s->block_start, left);
             s->strm->next_out += left;
             s->strm->avail_out -= left;
@@ -1756,6 +1757,8 @@ local block_state deflate_stored(s, flush)
         s->block_start = s->strstart;
         s->insert += MIN(used, s->w_size - s->insert);
     }
+    if (s->high_water < s->strstart)
+        s->high_water = s->strstart;
 
     /* If the last block was written to next_out, then done. */
     if (last)
@@ -1783,6 +1786,8 @@ local block_state deflate_stored(s, flush)
         read_buf(s->strm, s->window + s->strstart, have);
         s->strstart += have;
     }
+    if (s->high_water < s->strstart)
+        s->high_water = s->strstart;
 
     /* There was not enough avail_out to write a complete worthy or flushed
      * stored block to next_out. Write a stored block to pending instead, if we
diff --git a/zlib/gzlib.c b/zlib/gzlib.c
index e142ffb3d75..4105e6aff92 100644
--- a/zlib/gzlib.c
+++ b/zlib/gzlib.c
@@ -1,5 +1,5 @@
 /* gzlib.c -- zlib functions common to reading and writing gzip files
- * Copyright (C) 2004, 2010, 2011, 2012, 2013, 2016 Mark Adler
+ * Copyright (C) 2004-2017 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
diff --git a/zlib/gzwrite.c b/zlib/gzwrite.c
index 1ec1da40954..c7b5651d70b 100644
--- a/zlib/gzwrite.c
+++ b/zlib/gzwrite.c
@@ -1,5 +1,5 @@
 /* gzwrite.c -- zlib functions for writing gzip files
- * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013, 2016 Mark Adler
+ * Copyright (C) 2004-2017 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
diff --git a/zlib/inffast.c b/zlib/inffast.c
index 29eb7d8244a..0dbd1dbc09f 100644
--- a/zlib/inffast.c
+++ b/zlib/inffast.c
@@ -1,5 +1,5 @@
 /* inffast.c -- fast decoding
- * Copyright (C) 1995-2008, 2010, 2013, 2016 Mark Adler
+ * Copyright (C) 1995-2017 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
diff --git a/zlib/inftrees.c b/zlib/inftrees.c
index 8a904ddbcef..2ea08fc13ea 100644
--- a/zlib/inftrees.c
+++ b/zlib/inftrees.c
@@ -9,7 +9,7 @@
 #define MAXBITS 15
 
 const char inflate_copyright[] =
-   " inflate 1.2.10 Copyright 1995-2017 Mark Adler ";
+   " inflate 1.2.11 Copyright 1995-2017 Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -62,7 +62,7 @@ unsigned short FAR *work;
         35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
     static const unsigned short lext[31] = { /* Length codes 257..285 extra */
         16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
-        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 192, 202};
+        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 77, 202};
     static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
         1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
         257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
diff --git a/zlib/os400/README400 b/zlib/os400/README400
index 28dca8cd14a..4f98334f5ac 100644
--- a/zlib/os400/README400
+++ b/zlib/os400/README400
@@ -1,4 +1,4 @@
-        ZLIB version 1.2.10 for OS/400 installation instructions
+        ZLIB version 1.2.11 for OS/400 installation instructions
 
 1) Download and unpack the zlib tarball to some IFS directory.
    (i.e.: /path/to/the/zlib/ifs/source/directory)
diff --git a/zlib/os400/make.sh b/zlib/os400/make.sh
index ddbfb16b8a3..19eec117a67 100644
--- a/zlib/os400/make.sh
+++ b/zlib/os400/make.sh
@@ -260,7 +260,7 @@ fi
 echo '#pragma comment(user, "ZLIB version '"${VERSION}"'")' > os400.c
 echo '#pragma comment(user, __DATE__)' >> os400.c
 echo '#pragma comment(user, __TIME__)' >> os400.c
-echo '#pragma comment(copyright, "Copyright (C) 1995-2016 Jean-Loup Gailly, Mark Adler. OS/400 version by P. Monnerat.")' >> os400.c
+echo '#pragma comment(copyright, "Copyright (C) 1995-2017 Jean-Loup Gailly, Mark Adler. OS/400 version by P. Monnerat.")' >> os400.c
 make_module     OS400           os400.c
 LINK=                           # No need to rebuild service program yet.
 MODULES=
diff --git a/zlib/os400/zlib.inc b/zlib/os400/zlib.inc
index a2147dd0abe..c6aca2cbd6a 100644
--- a/zlib/os400/zlib.inc
+++ b/zlib/os400/zlib.inc
@@ -1,7 +1,7 @@
       *  ZLIB.INC - Interface to the general purpose compression library
       *
       *  ILE RPG400 version by Patrick Monnerat, DATASPHERE.
-      *  Version 1.2.10
+      *  Version 1.2.11
       *
       *
       *  WARNING:
@@ -22,12 +22,12 @@
       *
       *  Versioning information.
       *
-     D ZLIB_VERSION    C                   '1.2.10'
+     D ZLIB_VERSION    C                   '1.2.11'
      D ZLIB_VERNUM     C                   X'12a0'
      D ZLIB_VER_MAJOR  C                   1
      D ZLIB_VER_MINOR  C                   2
      D ZLIB_VER_REVISION...
-     D                 C                   10
+     D                 C                   11
      D ZLIB_VER_SUBREVISION...
      D                 C                   0
       *
diff --git a/zlib/qnx/package.qpg b/zlib/qnx/package.qpg
index d9a1229e96e..31e8e90db4d 100644
--- a/zlib/qnx/package.qpg
+++ b/zlib/qnx/package.qpg
@@ -25,10 +25,10 @@
       <QPG:Files>
          <QPG:Add file="../zconf.h" install="/opt/include/" user="root:sys" permission="644"/>
          <QPG:Add file="../zlib.h" install="/opt/include/" user="root:sys" permission="644"/>
-         <QPG:Add file="../libz.so.1.2.10" install="/opt/lib/" user="root:bin" permission="644"/>
-         <QPG:Add file="libz.so" install="/opt/lib/" component="dev" filetype="symlink" linkto="libz.so.1.2.10"/>
-         <QPG:Add file="libz.so.1" install="/opt/lib/" filetype="symlink" linkto="libz.so.1.2.10"/>
-         <QPG:Add file="../libz.so.1.2.10" install="/opt/lib/" component="slib"/>
+         <QPG:Add file="../libz.so.1.2.11" install="/opt/lib/" user="root:bin" permission="644"/>
+         <QPG:Add file="libz.so" install="/opt/lib/" component="dev" filetype="symlink" linkto="libz.so.1.2.11"/>
+         <QPG:Add file="libz.so.1" install="/opt/lib/" filetype="symlink" linkto="libz.so.1.2.11"/>
+         <QPG:Add file="../libz.so.1.2.11" install="/opt/lib/" component="slib"/>
       </QPG:Files>
 
       <QPG:PackageFilter>
@@ -63,7 +63,7 @@
             </QPM:ProductDescription>
 
             <QPM:ReleaseDescription>
-               <QPM:ReleaseVersion>1.2.10</QPM:ReleaseVersion>
+               <QPM:ReleaseVersion>1.2.11</QPM:ReleaseVersion>
                <QPM:ReleaseUrgency>Medium</QPM:ReleaseUrgency>
                <QPM:ReleaseStability>Stable</QPM:ReleaseStability>
                <QPM:ReleaseNoteMinor></QPM:ReleaseNoteMinor>
diff --git a/zlib/treebuild.xml b/zlib/treebuild.xml
index a530cc075cb..fd75525f995 100644
--- a/zlib/treebuild.xml
+++ b/zlib/treebuild.xml
@@ -1,6 +1,6 @@
 <?xml version="1.0" ?>
-<package name="zlib" version="1.2.10">
-    <library name="zlib" dlversion="1.2.10" dlname="z">
+<package name="zlib" version="1.2.11">
+    <library name="zlib" dlversion="1.2.11" dlname="z">
 	<property name="description"> zip compression library </property>
 	<property name="include-target-dir" value="$(@PACKAGE/install-includedir)" />
 
diff --git a/zlib/trees.c b/zlib/trees.c
index 6dfb2bc7f6b..d0a09b119ab 100644
--- a/zlib/trees.c
+++ b/zlib/trees.c
@@ -1,5 +1,5 @@
 /* trees.c -- output deflated data using Huffman coding
- * Copyright (C) 1995-2016 Jean-loup Gailly
+ * Copyright (C) 1995-2017 Jean-loup Gailly
  * detect_data_type() function provided freely by Cosmin Truta, 2006
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
@@ -906,7 +906,7 @@ void ZLIB_INTERNAL _tr_align(s)
 
 /* ===========================================================================
  * Determine the best encoding for the current block: dynamic trees, static
- * trees or store, and output the encoded block to the zip file.
+ * trees or store, and write out the encoded block.
  */
 void ZLIB_INTERNAL _tr_flush_block(s, buf, stored_len, last)
     deflate_state *s;
diff --git a/zlib/win32/Makefile.msc b/zlib/win32/Makefile.msc
index 67b773171da..6831882de43 100644
--- a/zlib/win32/Makefile.msc
+++ b/zlib/win32/Makefile.msc
@@ -1,5 +1,5 @@
 # Makefile for zlib using Microsoft (Visual) C
-# zlib is copyright (C) 1995-2006 Jean-loup Gailly and Mark Adler
+# zlib is copyright (C) 1995-2017 Jean-loup Gailly and Mark Adler
 #
 # Usage:
 #   nmake -f win32/Makefile.msc                          (standard build)
diff --git a/zlib/win32/README-WIN32.txt b/zlib/win32/README-WIN32.txt
index 16adcca5d1b..df7ab7f4b34 100644
--- a/zlib/win32/README-WIN32.txt
+++ b/zlib/win32/README-WIN32.txt
@@ -1,6 +1,6 @@
 ZLIB DATA COMPRESSION LIBRARY
 
-zlib 1.2.10 is a general purpose data compression library.  All the code is
+zlib 1.2.11 is a general purpose data compression library.  All the code is
 thread safe.  The data format used by the zlib library is described by RFCs
 (Request for Comments) 1950 to 1952 in the files
 http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format)
@@ -22,7 +22,7 @@ before asking for help.
 
 Manifest:
 
-The package zlib-1.2.10-win32-x86.zip will contain the following files:
+The package zlib-1.2.11-win32-x86.zip will contain the following files:
 
   README-WIN32.txt This document
   ChangeLog        Changes since previous zlib packages
@@ -72,7 +72,7 @@ are too numerous to cite here.
 
 Copyright notice:
 
-  (C) 1995-2012 Jean-loup Gailly and Mark Adler
+  (C) 1995-2017 Jean-loup Gailly and Mark Adler
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages
diff --git a/zlib/win32/VisualC.txt b/zlib/win32/VisualC.txt
index 579a5fc9e0f..1005b219410 100644
--- a/zlib/win32/VisualC.txt
+++ b/zlib/win32/VisualC.txt
@@ -1,3 +1,3 @@
 
 To build zlib using the Microsoft Visual C++ environment,
-use the appropriate project from the projects/ directory.
+use the appropriate project from the contrib/vstudio/ directory.
diff --git a/zlib/win32/zlib1.rc b/zlib/win32/zlib1.rc
index 5c0feed1b44..234e641c329 100644
--- a/zlib/win32/zlib1.rc
+++ b/zlib/win32/zlib1.rc
@@ -26,7 +26,7 @@ BEGIN
       VALUE "FileDescription",	"zlib data compression library\0"
       VALUE "FileVersion",	ZLIB_VERSION "\0"
       VALUE "InternalName",	"zlib1.dll\0"
-      VALUE "LegalCopyright",	"(C) 1995-2013 Jean-loup Gailly & Mark Adler\0"
+      VALUE "LegalCopyright",	"(C) 1995-2017 Jean-loup Gailly & Mark Adler\0"
       VALUE "OriginalFilename",	"zlib1.dll\0"
       VALUE "ProductName",	"zlib\0"
       VALUE "ProductVersion",	ZLIB_VERSION "\0"
diff --git a/zlib/zlib.3 b/zlib/zlib.3
index 00dc06119b1..bda4eb07370 100644
--- a/zlib/zlib.3
+++ b/zlib/zlib.3
@@ -1,4 +1,4 @@
-.TH ZLIB 3 "2 Jan 2017"
+.TH ZLIB 3 "15 Jan 2017"
 .SH NAME
 zlib \- compression/decompression library
 .SH SYNOPSIS
@@ -105,7 +105,7 @@ before asking for help.
 Send questions and/or comments to zlib@gzip.org,
 or (for the Windows DLL version) to Gilles Vollant (info@winimage.com).
 .SH AUTHORS AND LICENSE
-Version 1.2.10
+Version 1.2.11
 .LP
 Copyright (C) 1995-2017 Jean-loup Gailly and Mark Adler
 .LP
diff --git a/zlib/zlib.h b/zlib/zlib.h
index dc90dc8d22b..f09cdaf1e05 100644
--- a/zlib/zlib.h
+++ b/zlib/zlib.h
@@ -1,5 +1,5 @@
 /* zlib.h -- interface of the 'zlib' general purpose compression library
-  version 1.2.10, January 2nd, 2017
+  version 1.2.11, January 15th, 2017
 
   Copyright (C) 1995-2017 Jean-loup Gailly and Mark Adler
 
@@ -37,11 +37,11 @@
 extern "C" {
 #endif
 
-#define ZLIB_VERSION "1.2.10"
-#define ZLIB_VERNUM 0x12a0
+#define ZLIB_VERSION "1.2.11"
+#define ZLIB_VERNUM 0x12b0
 #define ZLIB_VER_MAJOR 1
 #define ZLIB_VER_MINOR 2
-#define ZLIB_VER_REVISION 10
+#define ZLIB_VER_REVISION 11
 #define ZLIB_VER_SUBREVISION 0
 
 /*
@@ -712,10 +712,11 @@ ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
    used to switch between compression and straight copy of the input data, or
    to switch to a different kind of input data requiring a different strategy.
    If the compression approach (which is a function of the level) or the
-   strategy is changed, then the input available so far is compressed with the
-   old level and strategy using deflate(strm, Z_BLOCK).  There are three
-   approaches for the compression levels 0, 1..3, and 4..9 respectively.  The
-   new level and strategy will take effect at the next call of deflate().
+   strategy is changed, and if any input has been consumed in a previous
+   deflate() call, then the input available so far is compressed with the old
+   level and strategy using deflate(strm, Z_BLOCK).  There are three approaches
+   for the compression levels 0, 1..3, and 4..9 respectively.  The new level
+   and strategy will take effect at the next call of deflate().
 
      If a deflate(strm, Z_BLOCK) is performed by deflateParams(), and it does
    not have enough output space to complete, then the parameter change will not
diff --git a/zlib/zutil.c b/zlib/zutil.c
index 166d8779cc2..08787c6f5d5 100644
--- a/zlib/zutil.c
+++ b/zlib/zutil.c
@@ -1,5 +1,5 @@
 /* zutil.c -- target dependent utility functions for the compression library
- * Copyright (C) 1995-2005, 2010, 2011, 2012, 2016 Jean-loup Gailly
+ * Copyright (C) 1995-2017 Jean-loup Gailly
  * For conditions of distribution and use, see copyright notice in zlib.h
  */