Add support for h8300hn and h8300sn

1 files changed, 0 insertions, 843 deletions

diff --git a/config-ml.in b/config-ml.in
index aae3f87fe74..e69de29bb2d 100644
--- a/config-ml.in
+++ b/config-ml.in
@@ -1,843 +0,0 @@
-# Configure fragment invoked in the post-target section for subdirs
-# wanting multilib support.
-#
-# It is advisable to support a few --enable/--disable options to let the
-# user select which libraries s/he really wants.
-#
-# Subdirectories wishing to use multilib should put the following lines
-# in the "post-target" section of configure.in.
-#
-# if [ "${srcdir}" = "." ] ; then
-#   if [ "${with_target_subdir}" != "." ] ; then
-#     . ${with_multisrctop}../../config-ml.in
-#   else
-#     . ${with_multisrctop}../config-ml.in
-#   fi
-# else
-#   . ${srcdir}/../config-ml.in
-# fi
-#
-# See librx/configure.in in the libg++ distribution for an example of how
-# to handle autoconf'd libraries.
-#
-# Things are complicated because 6 separate cases must be handled:
-# 2 (native, cross) x 3 (absolute-path, relative-not-dot, dot) = 6.
-#
-# srcdir=. is special.  It must handle make programs that don't handle VPATH.
-# To implement this, a symlink tree is built for each library and for each
-# multilib subdir.
-#
-# The build tree is layed out as
-#
-# ./
-#   libg++
-#   newlib
-#   m68020/
-#          libg++
-#          newlib
-#          m68881/
-#                 libg++
-#                 newlib
-#
-# The nice feature about this arrangement is that inter-library references
-# in the build tree work without having to care where you are.  Note that
-# inter-library references also work in the source tree because symlink trees
-# are built when srcdir=.
-#
-# Unfortunately, trying to access the libraries in the build tree requires
-# the user to manually choose which library to use as GCC won't be able to
-# find the right one.  This is viewed as the lesser of two evils.
-#
-# Configure variables:
-# ${with_target_subdir} = "." for native, or ${target_alias} for cross.
-# Set by top level Makefile.
-# ${with_multisrctop} = how many levels of multilibs there are in the source
-# tree.  It exists to handle the case of configuring in the source tree:
-# ${srcdir} is not constant.
-# ${with_multisubdir} = name of multilib subdirectory (eg: m68020/m68881).
-#
-# Makefile variables:
-# MULTISRCTOP = number of multilib levels in source tree (+1 if cross)
-# (FIXME: note that this is different than ${with_multisrctop}.  Check out.).
-# MULTIBUILDTOP = number of multilib levels in build tree
-# MULTIDIRS = list of multilib subdirs (eg: m68000 m68020 ...)
-# (only defined in each library's main Makefile).
-# MULTISUBDIR = installed subdirectory name with leading '/' (eg: /m68000)
-# (only defined in each multilib subdir).
-
-# FIXME: Multilib is currently disabled by default for everything other than
-# newlib.  It is up to each target to turn on multilib support for the other
-# libraries as desired.
-
-# We have to handle being invoked by both Cygnus configure and Autoconf.
-#
-# Cygnus configure incoming variables:
-# srcdir, subdir, host, arguments
-#
-# Autoconf incoming variables:
-# srcdir, host, ac_configure_args
-#
-# We *could* figure srcdir and host out, but we'd have to do work that
-# our caller has already done to figure them out and requiring these two
-# seems reasonable.
-# Note that `host' in this case is GCC's `target'.  Target libraries are
-# configured for a particular host.
-
-if [ -n "${ac_configure_args}" ]; then
-  Makefile=${ac_file-Makefile}
-  ml_config_shell=${CONFIG_SHELL-/bin/sh}
-  ml_arguments="${ac_configure_args}"
-  ml_realsrcdir=${srcdir}
-else
-  Makefile=${Makefile-Makefile}
-  ml_config_shell=${config_shell-/bin/sh}
-  ml_arguments="${arguments}"
-  if [ -n "${subdir}" -a "${subdir}" != "." ] ; then
-    ml_realsrcdir=${srcdir}/${subdir}
-  else
-    ml_realsrcdir=${srcdir}
-  fi
-fi
-
-# Scan all the arguments and set all the ones we need.
-
-ml_verbose=--verbose
-for option in ${ml_arguments}
-do
-  case $option in
-  --*) ;;
-  -*) option=-$option ;;
-  esac
-
-  case $option in
-  --*=*)
-	optarg=`echo $option | sed -e 's/^[^=]*=//'`
-	;;
-  esac
-
-  case $option in
-  --disable-*)
-	enableopt=`echo ${option} | sed 's:^--disable-:enable_:;s:-:_:g'`
-	eval $enableopt=no
-	;;
-  --enable-*)
-	case "$option" in
-	*=*)	;;
-	*)	optarg=yes ;;
-	esac
-	enableopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'`
-	eval $enableopt="$optarg"
-	;;
-  --norecursion | --no*)
-	ml_norecursion=yes
-	;;
-  --silent | --sil* | --quiet | --q*)
-	ml_verbose=--silent
-	;;
-  --verbose | --v | --verb*)
-	ml_verbose=--verbose
-	;;
-  --with-*)
-	case "$option" in
-	*=*)	;;
-	*)	optarg=yes ;;
-	esac
-	withopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'`
-	eval $withopt="$optarg"
-	;;
-  --without-*)
-	withopt=`echo ${option} | sed 's:^--::;s:out::;s:-:_:g'`
-	eval $withopt=no
-	;;
-  esac
-done
-
-# Only do this if --enable-multilib.
-if [ "${enable_multilib}" = yes ]; then
-
-# Compute whether this is the library's top level directory
-# (ie: not a multilib subdirectory, and not a subdirectory like libg++/src).
-# ${with_multisubdir} tells us we're in the right branch, but we could be
-# in a subdir of that.
-# ??? The previous version could void this test by separating the process into
-# two files: one that only the library's toplevel configure.in ran (to
-# configure the multilib subdirs), and another that all configure.in's ran to
-# update the Makefile.  It seemed reasonable to collapse all multilib support
-# into one file, but it does leave us with having to perform this test.
-ml_toplevel_p=no
-if [ -z "${with_multisubdir}" ]; then
-  if [ "${srcdir}" = "." ]; then
-    # Use ${ml_realsrcdir} instead of ${srcdir} here to account for ${subdir}.
-    # ${with_target_subdir} = "." for native, otherwise target alias.
-    if [ "${with_target_subdir}" = "." ]; then
-      if [ -f ${ml_realsrcdir}/../config-ml.in ]; then
-	ml_toplevel_p=yes
-      fi
-    else
-      if [ -f ${ml_realsrcdir}/../../config-ml.in ]; then
-	ml_toplevel_p=yes
-      fi
-    fi
-  else
-    # Use ${ml_realsrcdir} instead of ${srcdir} here to account for ${subdir}.
-    if [ -f ${ml_realsrcdir}/../config-ml.in ]; then
-      ml_toplevel_p=yes
-    fi
-  fi
-fi
-
-# If this is the library's top level directory, set multidirs to the
-# multilib subdirs to support.  This lives at the top because we need
-# `multidirs' set right away.
-
-if [ "${ml_toplevel_p}" = yes ]; then
-
-multidirs=
-for i in `${CC-gcc} --print-multi-lib 2>/dev/null`; do
-  dir=`echo $i | sed -e 's/;.*$//'`
-  if [ "${dir}" = "." ]; then
-    true
-  else
-    if [ -z "${multidirs}" ]; then
-      multidirs="${dir}"
-    else
-      multidirs="${multidirs} ${dir}"
-    fi
-  fi
-done
-
-# Target libraries are configured for the host they run on, so we check
-# $host here, not $target.
-
-case "${host}" in
-arc-*-elf*)
-	if [ x$enable_biendian != xyes ]
-	then
-	  old_multidirs=${multidirs}
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "${x}" in
-	      *be*) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	;;
-arm-*-*)
-	if [ x"$enable_fpu" = xno ]
-	then
-	  old_multidirs=${multidirs}
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "${x}" in
-	      *fpu*) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	if [ x"$enable_26bit" = xno ]
-	then
-	  old_multidirs=${multidirs}
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "${x}" in
-	      *26bit*) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	if [ x"$enable_underscore" = xno ]
-	then
-	  old_multidirs=${multidirs}
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "${x}" in
-	      *under*) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	if [ x"$enable_interwork" = xno ]
-	then
-	  old_multidirs=${multidirs}
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "${x}" in
-	      *interwork*) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	if [ x$enable_biendian = xno ]
-	then
-	  old_multidirs="${multidirs}"
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "$x" in
-	      *le* ) : ;;
-	      *be* ) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	if [ x"$enable_nofmult" = xno ]
-	then
-	  old_multidirs="${multidirs}"
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "$x" in
-	      *nofmult* ) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	;;
-m68*-*-*)
-	if [ x$enable_softfloat = xno ]
-	then
-	  old_multidirs="${multidirs}"
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "$x" in
-	      *soft-float* ) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	if [ x$enable_m68881 = xno ]
-	then
-	  old_multidirs="${multidirs}"
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "$x" in
-	      *m68881* ) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	if [ x$enable_m68000 = xno ]
-	then
-	  old_multidirs="${multidirs}"
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "$x" in
-	      *m68000* ) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	if [ x$enable_m68020 = xno ]
-	then
-	  old_multidirs="${multidirs}"
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "$x" in
-	      *m68020* ) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	;;
-mips*-*-*)
-	if [ x$enable_single_float = xno ]
-	then
-	  old_multidirs="${multidirs}"
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "$x" in
-	      *single* ) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	if [ x$enable_biendian = xno ]
-	then
-	  old_multidirs="${multidirs}"
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "$x" in
-	      *el* ) : ;;
-	      *eb* ) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	if [ x$enable_softfloat = xno ]
-	then
-	  old_multidirs="${multidirs}"
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "$x" in
-	      *soft-float* ) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	case " $multidirs " in
-	*" mabi=64 "*)
-	  # We will not be able to create libraries with -mabi=64 if
-	  # we cannot even link a trivial program.  It usually
-	  # indicates the 64bit libraries are missing.
-	  if echo 'main() {}' > conftest.c &&
-	     ${CC-gcc} -mabi=64 conftest.c -o conftest; then
-	    :
-	  else
-	    echo Could not link program with -mabi=64, disabling it.
-	    old_multidirs="${multidirs}"
-	    multidirs=""
-	    for x in ${old_multidirs}; do
-	      case "$x" in
-	      *mabi=64* ) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	      esac
-	    done
-	  fi
-	  rm -f conftest.c conftest
-	  ;;
-	esac
-	;;
-powerpc*-*-* | rs6000*-*-*)
-	if [ x$enable_softfloat = xno ]
-	then
-	  old_multidirs="${multidirs}"
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "$x" in
-	      *soft-float* ) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	if [ x$enable_powercpu = xno ]
-	then
-	  old_multidirs="${multidirs}"
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "$x" in
-	      power | */power | */power/* ) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	if [ x$enable_powerpccpu = xno ]
-	then
-	  old_multidirs="${multidirs}"
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "$x" in
-	      *powerpc* ) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	if [ x$enable_powerpcos = xno ]
-	then
-	  old_multidirs="${multidirs}"
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "$x" in
-	      *mcall-linux* | *mcall-solaris* ) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	if [ x$enable_biendian = xno ]
-	then
-	  old_multidirs="${multidirs}"
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "$x" in
-	      *mlittle* | *mbig* ) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	if [ x$enable_sysv = xno ]
-	then
-	  old_multidirs="${multidirs}"
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "$x" in
-	      *mcall-sysv* ) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	if [ x$enable_aix = xno ]
-	then
-	  old_multidirs="${multidirs}"
-	  multidirs=""
-	  for x in ${old_multidirs}; do
-	    case "$x" in
-	      *mcall-aix* ) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	    esac
-	  done
-	fi
-	;;
-sparc*-*-*)
-	case " $multidirs " in
-	*" m64 "*)
-	  # We will not be able to create libraries with -m64 if
-	  # we cannot even link a trivial program.  It usually
-	  # indicates the 64bit libraries are missing.
-	  if echo 'main() {}' > conftest.c &&
-	     ${CC-gcc} -m64 conftest.c -o conftest; then
-	    :
-	  else
-	    echo Could not link program with -m64, disabling it.
-	    old_multidirs="${multidirs}"
-	    multidirs=""
-	    for x in ${old_multidirs}; do
-	      case "$x" in
-	      *m64* ) : ;;
-	      *) multidirs="${multidirs} ${x}" ;;
-	      esac
-	    done
-	  fi
-	  rm -f conftest.c conftest
-	  ;;
-	esac
-	;;
-esac
-
-# Remove extraneous blanks from multidirs.
-# Tests like `if [ -n "$multidirs" ]' require it.
-multidirs=`echo "$multidirs" | sed -e 's/^[ ][ ]*//' -e 's/[ ][ ]*$//' -e 's/[ ][ ]*/ /g'`
-
-# Add code to library's top level makefile to handle building the multilib
-# subdirs.
-
-cat > Multi.tem <<\EOF
-
-PWD=$${PWDCMD-pwd}
-
-# FIXME: There should be an @-sign in front of the `if'.
-# Leave out until this is tested a bit more.
-multi-do:
-	if [ -z "$(MULTIDIRS)" ]; then \
-	  true; \
-	else \
-	  rootpre=`${PWD}`/; export rootpre; \
-	  srcrootpre=`cd $(srcdir); ${PWD}`/; export srcrootpre; \
-	  lib=`echo $${rootpre} | sed -e 's,^.*/\([^/][^/]*\)/$$,\1,'`; \
-	  compiler="$(CC)"; \
-	  for i in `$${compiler} --print-multi-lib 2>/dev/null`; do \
-	    dir=`echo $$i | sed -e 's/;.*$$//'`; \
-	    if [ "$${dir}" = "." ]; then \
-	      true; \
-	    else \
-	      if [ -d ../$${dir}/$${lib} ]; then \
-		flags=`echo $$i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
-		if (cd ../$${dir}/$${lib}; $(MAKE) $(FLAGS_TO_PASS) \
-				CFLAGS="$(CFLAGS) $${flags}" \
-				prefix="$(prefix)" \
-				exec_prefix="$(exec_prefix)" \
-				CXXFLAGS="$(CXXFLAGS) $${flags}" \
-				LIBCFLAGS="$(LIBCFLAGS) $${flags}" \
-				LIBCXXFLAGS="$(LIBCXXFLAGS) $${flags}" \
-				LDFLAGS="$(LDFLAGS) $${flags}" \
-				DESTDIR="$(DESTDIR)" \
-				$(DO)); then \
-		  true; \
-		else \
-		  exit 1; \
-		fi; \
-	      else true; \
-	      fi; \
-	    fi; \
-	  done; \
-	fi
-
-# FIXME: There should be an @-sign in front of the `if'.
-# Leave out until this is tested a bit more.
-multi-clean:
-	if [ -z "$(MULTIDIRS)" ]; then \
-	  true; \
-	else \
-	  lib=`${PWD} | sed -e 's,^.*/\([^/][^/]*\)$$,\1,'`; \
-	  for dir in Makefile $(MULTIDIRS); do \
-	    if [ -f ../$${dir}/$${lib}/Makefile ]; then \
-	      if (cd ../$${dir}/$${lib}; $(MAKE) $(FLAGS_TO_PASS) $(DO)); \
-	      then true; \
-	      else exit 1; \
-	      fi; \
-	    else true; \
-	    fi; \
-	  done; \
-	fi
-EOF
-
-cat ${Makefile} Multi.tem > Makefile.tem
-rm -f ${Makefile} Multi.tem
-mv Makefile.tem ${Makefile}
-
-fi # ${ml_toplevel_p} = yes
-
-if [ "${ml_verbose}" = --verbose ]; then
-  echo "Adding multilib support to Makefile in ${ml_realsrcdir}"
-  if [ "${ml_toplevel_p}" = yes ]; then
-    echo "multidirs=${multidirs}"
-  fi
-  echo "with_multisubdir=${with_multisubdir}"
-fi
-
-if [ "${srcdir}" = "." ]; then
-  if [ "${with_target_subdir}" != "." ]; then
-    ml_srcdotdot="../"
-  else
-    ml_srcdotdot=""
-  fi
-else
-  ml_srcdotdot=""
-fi
-
-if [ -z "${with_multisubdir}" ]; then
-  ml_subdir=
-  ml_builddotdot=
-  : # ml_srcdotdot= # already set
-else
-  ml_subdir="/${with_multisubdir}"
-  # The '[^/][^/]*' appears that way to work around a SunOS sed bug.
-  ml_builddotdot=`echo ${with_multisubdir} | sed -e 's:[^/][^/]*:..:g'`/
-  if [ "$srcdir" = "." ]; then
-    ml_srcdotdot=${ml_srcdotdot}${ml_builddotdot}
-  else
-    : # ml_srcdotdot= # already set
-  fi
-fi
-
-if [ "${ml_toplevel_p}" = yes ]; then
-  ml_do='$(MAKE)'
-  ml_clean='$(MAKE)'
-else
-  ml_do=true
-  ml_clean=true
-fi
-
-# TOP is used by newlib and should not be used elsewhere for this purpose.
-# MULTI{SRC,BUILD}TOP are the proper ones to use.  MULTISRCTOP is empty
-# when srcdir != builddir.  MULTIBUILDTOP is always some number of ../'s.
-# FIXME: newlib needs to be updated to use MULTI{SRC,BUILD}TOP so we can
-# delete TOP.  Newlib may wish to continue to use TOP for its own purposes
-# of course.
-# MULTIDIRS is non-empty for the cpu top level Makefile (eg: newlib/Makefile)
-# and lists the subdirectories to recurse into.
-# MULTISUBDIR is non-empty in each cpu subdirectory's Makefile
-# (eg: newlib/h8300h/Makefile) and is the installed subdirectory name with
-# a leading '/'.
-# MULTIDO is used for targets like all, install, and check where
-# $(FLAGS_TO_PASS) augmented with the subdir's compiler option is needed.
-# MULTICLEAN is used for the *clean targets.
-#
-# ??? It is possible to merge MULTIDO and MULTICLEAN into one.  They are
-# currently kept separate because we don't want the *clean targets to require
-# the existence of the compiler (which MULTIDO currently requires) and
-# therefore we'd have to record the directory options as well as names
-# (currently we just record the names and use --print-multi-lib to get the
-# options).
-
-sed -e "s:^TOP[ 	]*=[ 	]*\([./]*\)[ 	]*$:TOP = ${ml_builddotdot}\1:" \
-    -e "s:^MULTISRCTOP[ 	]*=.*$:MULTISRCTOP = ${ml_srcdotdot}:" \
-    -e "s:^MULTIBUILDTOP[ 	]*=.*$:MULTIBUILDTOP = ${ml_builddotdot}:" \
-    -e "s:^MULTIDIRS[ 	]*=.*$:MULTIDIRS = ${multidirs}:" \
-    -e "s:^MULTISUBDIR[ 	]*=.*$:MULTISUBDIR = ${ml_subdir}:" \
-    -e "s:^MULTIDO[ 	]*=.*$:MULTIDO = $ml_do:" \
-    -e "s:^MULTICLEAN[ 	]*=.*$:MULTICLEAN = $ml_clean:" \
-	${Makefile} > Makefile.tem
-rm -f ${Makefile}
-mv Makefile.tem ${Makefile}
-
-# If this is the library's top level, configure each multilib subdir.
-# This is done at the end because this is the loop that runs configure
-# in each multilib subdir and it seemed reasonable to finish updating the
-# Makefile before going on to configure the subdirs.
-
-if [ "${ml_toplevel_p}" = yes ]; then
-
-# We must freshly configure each subdirectory.  This bit of code is
-# actually partially stolen from the main configure script.  FIXME.
-
-if [ -n "${multidirs}" ] && [ -z "${ml_norecursion}" ]; then
-
-  if [ "${ml_verbose}" = --verbose ]; then
-    echo "Running configure in multilib subdirs ${multidirs}"
-    echo "pwd: `${PWDCMD-pwd}`"
-  fi
-
-  ml_origdir=`${PWDCMD-pwd}`
-  ml_libdir=`echo $ml_origdir | sed -e 's,^.*/,,'`
-  # cd to top-level-build-dir/${with_target_subdir}
-  cd ..
-
-  for ml_dir in ${multidirs}; do
-
-    if [ "${ml_verbose}" = --verbose ]; then
-      echo "Running configure in multilib subdir ${ml_dir}"
-      echo "pwd: `${PWDCMD-pwd}`"
-    fi
-
-    if [ -d ${ml_dir} ]; then true; else
-      # ``mkdir -p ${ml_dir}'' See also mkinstalldirs.
-      pathcomp=""
-      for d in `echo ":${ml_dir}" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`; do
-        pathcomp="$pathcomp$d"
-        case "$pathcomp" in
-          -* ) pathcomp=./$pathcomp ;;
-        esac
-        if test ! -d "$pathcomp"; then
-           echo "mkdir $pathcomp" 1>&2
-           mkdir "$pathcomp" > /dev/null 2>&1 || lasterr=$?
-        fi
-        if test ! -d "$pathcomp"; then
-	   exit $lasterr
-        fi
-        pathcomp="$pathcomp/"
-      done
-    fi
-    if [ -d ${ml_dir}/${ml_libdir} ]; then true; else mkdir ${ml_dir}/${ml_libdir}; fi
-
-    # Eg: if ${ml_dir} = m68000/m68881, dotdot = ../../
-    dotdot=../`echo ${ml_dir} | sed -e 's|[^/]||g' -e 's|/|../|g'`
-
-    case ${srcdir} in
-    ".")
-      echo Building symlink tree in `${PWDCMD-pwd}`/${ml_dir}/${ml_libdir}
-      if [ "${with_target_subdir}" != "." ]; then
-	ml_unsubdir="../"
-      else
-	ml_unsubdir=""
-      fi
-      (cd ${ml_dir}/${ml_libdir};
-       ../${dotdot}${ml_unsubdir}symlink-tree ../${dotdot}${ml_unsubdir}${ml_libdir} "")
-      if [ -f ${ml_dir}/${ml_libdir}/Makefile ]; then
-	if [ x"${MAKE}" = x ]; then
-	  (cd ${ml_dir}/${ml_libdir}; make distclean)
-	else
-	  (cd ${ml_dir}/${ml_libdir}; ${MAKE} distclean)
-	fi
-      fi
-      ml_newsrcdir="."
-      ml_srcdiroption=
-      multisrctop=${dotdot}
-      ;;
-    *)
-      case "${srcdir}" in
-      /*) # absolute path
-        ml_newsrcdir=${srcdir}
-        ;;
-      *) # otherwise relative
-        ml_newsrcdir=${dotdot}${srcdir}
-        ;;
-      esac
-      ml_srcdiroption="-srcdir=${ml_newsrcdir}"
-      multisrctop=
-      ;;
-    esac
-
-    case "${progname}" in
-    /*)     ml_recprog=${progname} ;;
-    *)      ml_recprog=${dotdot}${progname} ;;
-    esac
-
-    # FIXME: POPDIR=${PWD=`pwd`} doesn't work here.
-    ML_POPDIR=`pwd`
-    cd ${ml_dir}/${ml_libdir}
-
-    if [ -f ${ml_newsrcdir}/configure ]; then
-      ml_recprog="${ml_newsrcdir}/configure --cache-file=../config.cache"
-    fi
-
-    # find compiler flag corresponding to ${ml_dir}
-    for i in `${CC-gcc} --print-multi-lib 2>/dev/null`; do 
-      dir=`echo $i | sed -e 's/;.*$//'`
-      if [ "${dir}" = "${ml_dir}" ]; then
-        flags=`echo $i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`
-        break
-      fi
-    done
-    ml_config_env='CC="${CC_}$flags" CXX="${CXX_}$flags"'
-
-    if [ "${with_target_subdir}" = "." ]; then
-	CC_=$CC' '
-	CXX_=$CXX' '
-    else
-	# Create a regular expression that matches any string as long
-	# as ML_POPDIR.
-	popdir_rx=`echo ${ML_POPDIR} | sed 's,.,.,g'`
-	CC_=
-	for arg in ${CC}; do
-	  case $arg in
-	  -[BIL]"${ML_POPDIR}"/*)
-	    CC_="${CC_}"`echo "X${arg}" | sed -n "s/X\\(-[BIL]${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X-[BIL]${popdir_rx}\\(.*\\)/\1/p"`' ' ;;
-	  "${ML_POPDIR}"/*)
-	    CC_="${CC_}"`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
-	  *)
-	    CC_="${CC_}${arg} " ;;
-	  esac
-	done
-
-	CXX_=
-	for arg in ${CXX}; do
-	  case $arg in
-	  -[BIL]"${ML_POPDIR}"/*)
-	    CXX_="${CXX_}"`echo "X${arg}" | sed -n "s/X\\(-[BIL]${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X-[BIL]${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
-	  "${ML_POPDIR}"/*)
-	    CXX_="${CXX_}"`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
-	  *)
-	    CXX_="${CXX_}${arg} " ;;
-	  esac
-	done
-
-	if test "x${LD_LIBRARY_PATH+set}" = xset; then
-	  LD_LIBRARY_PATH_=
-	  for arg in `echo "$LD_LIBRARY_PATH" | tr ':' ' '`; do
-	    case "$arg" in
-	    "${ML_POPDIR}"/*)
-	      arg=`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`
-	      ;;
-	    esac
-	    if test "x$LD_LIBRARY_PATH_" != x; then
-	      LD_LIBRARY_PATH_=$LD_LIBRARY_PATH_:$arg
-	    else
-	      LD_LIBRARY_PATH_=$arg
-	    fi
-          done
-	  ml_config_env="$ml_config_env LD_LIBRARY_PATH=$LD_LIBRARY_PATH_"
-	fi
-
-	if test "x${SHLIB_PATH+set}" = xset; then
-	  SHLIB_PATH_=
-	  for arg in `echo "$SHLIB_PATH" | tr ':' ' '`; do
-	    case "$arg" in
-	    "${ML_POPDIR}"/*)
-	      arg=`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`
-	      ;;
-	    esac
-	    if test "x$SHLIB_PATH_" != x; then
-	      SHLIB_PATH_=$SHLIB_PATH_:$arg
-	    else
-	      SHLIB_PATH_=$arg
-	    fi
-          done
-	  ml_config_env="$ml_config_env SHLIB_PATH=$SHLIB_PATH_"
-	fi
-    fi
-
-    if eval ${ml_config_env} ${ml_config_shell} ${ml_recprog} \
-	--with-multisubdir=${ml_dir} --with-multisrctop=${multisrctop} \
-	${ml_arguments} ${ml_srcdiroption} ; then
-      true
-    else
-      exit 1
-    fi
-
-    cd ${ML_POPDIR}
-
-  done
-
-  cd ${ml_origdir}
-fi
-
-fi # ${ml_toplevel_p} = yes
-fi # ${enable_multilib} = yes