# Copyright 1999-2013 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 # $Header: /var/cvsroot/gentoo-x86/net-dialup/speedtouch-usb/speedtouch-usb-3.0.1.2-r3.ebuild,v 1.3 2013/11/06 03:52:16 patrick Exp $ inherit eutils linux-info DESCRIPTION="Firmware, kernel driver and configuration instructions for Alcatel SpeedTouch USB modems" HOMEPAGE="http://www.speedtouch.com/" SRC_URI="http://www.speedtouch.com/download/drivers/USB/SpeedTouch330_firmware_${PV//./}.zip" # Taken from http://www.speedtouch.com/driver_upgrade_lx_3.0.1.2.htm LICENSE="SpeedTouch-USB-Firmware" SLOT="0" KEYWORDS="~amd64 x86" IUSE="" RDEPEND="net-dialup/ppp" DEPEND="app-arch/unzip" S="${WORKDIR}" pkg_setup() { linux-info_pkg_setup if kernel_is lt 2 6 10 ; then eerror "The kernel-space driver exists only in kernels >= 2.6.10." eerror "Please upgrade the kernel." die "Unsupported kernel version" fi } src_install() { local FILE_VER="${PV#*.}" FILE_VER="${PV%%.*}.${FILE_VER//./}" # {major_ver}.{minor_digits} # Extract the "stage 1" portion of the firmware dd if=KQD6_${FILE_VER} of=speedtch-1.bin.2 \ ibs=1 obs=991 count=991 skip=36 &> /dev/null \ || die "Extraction of stage 1 firmware (step 1) failed" dd if=ZZZL_${FILE_VER} of=speedtch-1.bin.4 \ ibs=1 obs=935 count=935 skip=32 &> /dev/null \ || die "Extraction of stage 1 firmware (step 2) failed" # Extract the "stage 2" portion of the firmware dd if=KQD6_${FILE_VER} of=speedtch-2.bin.2 \ ibs=1 obs=762650 count=762650 skip=1027 &> /dev/null \ || die "Extraction of stage 2 firmware (step 1) failed" dd if=ZZZL_${FILE_VER} of=speedtch-2.bin.4 \ ibs=1 obs=775545 count=775545 skip=967 &> /dev/null \ || die "Extraction of stage 2 firmware (step 2) failed" # Copy to the firmware directory insinto /lib/firmware insopts -m 600 doins speedtch-{1,2}.bin.{2,4} || die "doins firmware failed" # Symlinks for other revisions of the modem cd "${D}/lib/firmware" for n in 1 2 ; do for rev in 0 1 ; do ln -sfn speedtch-${n}.bin.2 speedtch-${n}.bin.${rev} done # Seems like a reasonable guess, for revision 3 ln -sfn speedtch-${stub}${n}.bin.4 speedtch-${n}.bin.3 done # Documentation necessary to complete the setup dodoc "${FILESDIR}/README" || die "dodoc failed" } pkg_postinst() { [[ -e /etc/hotplug/usb.usermap ]] && egrep -q " 0x06[bB]9 +0x4061 " /etc/hotplug/usb.usermap && \ ewarn "Please remove the SpeedTouch line from /etc/hotplug/usb.usermap" # Check kernel configuration local CONFIG_CHECK="~FW_LOADER ~NET ~PACKET ~ATM ~NETDEVICES ~USB_DEVICEFS ~USB_ATM ~USB_SPEEDTOUCH \ ~PPP ~PPPOATM ~PPPOE ~ATM_BR2684" local WARNING_PPPOATM="CONFIG_PPPOATM:\t is not set (required for PPPoA links)" local WARNING_PPPOE="CONFIG_PPPOE:\t is not set (required for PPPoE links)" local WARNING_ATM_BR2684="CONFIG_ATM_BR2684:\t is not set (required for PPPoE links)" check_extra_config echo # Check user-space for PPPoA support if ! built_with_use net-dialup/ppp atm ; then ewarn "Run the following command if connecting via PPPoA protocol:" ewarn " euse -E atm && emerge net-dialup/ppp" echo fi # Check user-space for PPPoE support if ! has_version >=net-dialup/linux-atm-2.5.0 ; then ewarn "Run the following command if connecting via PPPoE protocol:" ewarn " emerge net-dialup/linux-atm" echo fi ewarn "To complete the installation, you must read the documentation in" ewarn " ${ROOT}usr/share/doc/${PF}" }