#!/usr/bin/make

# tested with make-3.79.1/gcc-2.96 (shared) and make-3.80/gcc-3.3.2/3 (pie)
# make-3.79.1 does not support $$@ as target requirement (works for make-3.80)

# preliminaries:
# Adamantix modifies the specs adding etexec/etdyn for ET_EXEC/ET_DYN binaries
# Adamantix's behaviour is presumed (no answers from peter@adamantix)
# Gentoo modifies the specs adding yet_dyn/pie|yet_exec/nopie to enable|disable ET_DYN binaries
#
# disable ET_DYN binary building explicitely, where needed by setting
# Adamantix: etexec
# Gentoo: nopie/yet_exec

# gcc does not check correctly -y<something>, so we have to grep the specs file

# Gentoo used this to have non ET_DYN behaviour
# not working anymore w/ gcc-3.3.3-r1, since we do not know the defaults
#GCC_SPCS := $(shell gcc -dumpspecs > dumpspecs)
#CC := gcc -specs=dumpspecs

CC := gcc
CC_PIC := -fPIC -DPIC

# Adamantix
CC_PIE := $(shell if grep -q "etdyn" `gcc -print-file-name=specs` ; then echo "-etdyn"; fi)
CC_ETEXEC := $(shell if grep -q "etexec" `gcc -print-file-name=specs` ; then echo "-etexec"; fi)

# non Adamantix case
ifneq ($(CC_ETEXEC),-etexec)

SCRT_FILE := $(shell if test -r /usr/lib/crt1S.o; then echo "/usr/lib/crt1S.o"; fi)
ifeq ($(SCRT_FILE),)
SCRT_FILE := $(shell if test -r /usr/lib/Scrt1.o; then echo "/usr/lib/Scrt1.o"; fi)
endif
# we can use -pie only if /usr/lib/Scrt1.o exists
ifneq ($(SCRT_FILE),)
# test works only for -fpie, not -pie, why?
CC_PIE := $(shell if gcc -fpie -S -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-pie"; fi)

# Gentoo disabling ET_DYN
ifeq ($(CC_PIE),-pie)
CC_ETEXEC := $(shell if grep -q "nopie" `gcc -print-file-name=specs` ; then echo "-nopie"; fi)
endif
endif

ifeq ($(CC_PIE),)
# Gentoo creating ET_DYN (if defaulting to ET_EXEC)
CC_PIE := $(shell if grep -q "yet_dyn" `gcc -print-file-name=specs` ; then echo "-yet_dyn"; fi)
# Gentoo disabling ET_DYN (if defaulting to ET_DYN)
CC_ETEXEC := $(shell if grep -q "yet_exec" `gcc -print-file-name=specs` ; then echo "-yet_exec"; fi)

# generic case, if we do not have any reference in specs
ifeq ($(CC_PIE),)
# if we have an Scrt1.o file, use that instead of the locally built one
# could someone test this on platforms, where Scrt1.o exists, but there
# is no equivalent crt1S.S? At least it works for uClibc.
ifeq ($(SCRT_FILE),)
SCRT_FILE := crt1S.o
endif

CC_PIE := -shared
PAX_DEP := $(SCRT_FILE) interp.o

# end of generic
endif

# end of Gentoo
endif

# end of non-Adamantix case
endif

# check for stack-protector
CC_SSP := $(shell if gcc -fno-stack-protector -S -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-fno-stack-protector"; fi)
CC_SSP_ALL := $(shell if gcc -fno-stack-protector-all -S -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-fno-stack-protector-all"; fi)

# check for installed binaries
CHPAXBIN := $(shell if which chpax >/dev/null 2>&1 ; then echo chpax; fi)
PAXCTLBIN := $(shell if which paxctl >/dev/null 2>&1 ; then echo paxctl; fi)
# should somehow use this to see if we really need paxctl
# list=`paxctl -qQv /sbin/paxctl 2>/dev/null`; if echo $list | grep -q "PaX flags" ; then echo paxctl; fi
# instead we use both markings to have paxtest running correctly on all platforms

ifneq ($(PAXCTLBIN),)
DUMMY := $(shell echo '${PAXCTLBIN} $$*' > paxbin)
endif

OPT_FLAGS  := -O2
PTHREAD := -lpthread
# define stripping of binaries/libs here, or set these on make's commandline,
# else you'll loose the chpax flags!
LDFLAGS :=
SHLDFLAGS :=
ifndef RUNDIR
RUNDIR := .
endif

# The Hardened GCC compiler has stack protector on by default, this
# could interfere with the results of this test.

CFLAGS	:= $(OPT_FLAGS) -DRUNDIR=\"${RUNDIR}\" $(CC_SSP) $(CC_SSP_ALL)

EXEC_TESTS = anonmap execbss execdata execheap execstack
MPROT_TESTS = mprotanon mprotbss mprotdata mprotheap mprotstack
MPROTSH_TESTS = mprotshbss mprotshdata writetext
RAND_TESTS = randamap randheap1 randheap2 randmain1 randmain2 randshlib randstack1 randstack2
RET_TESTS = rettofunc1 rettofunc2
RETX_TESTS = rettofunc1x rettofunc2x
SHLIB_TESTS = shlibbss shlibdata

TESTS = $(EXEC_TESTS) $(MPROT_TESTS) $(MPROTSH_TESTS) $(RAND_TESTS) $(RET_TESTS) $(RETX_TESTS) $(SHLIB_TESTS)

UTILS=	getamap getheap1 getheap2 getmain1 getmain2 getshlib getstack1 getstack2

SHLIBS=	shlibtest.so shlibtest2.so

ifeq ($(CHPAXBIN),)
CHPAXVER := 0.5
CHPAX := chpax-$(CHPAXVER)
CHPAXSRC := $(CHPAX)/aout.c $(CHPAX)/chpax.c $(CHPAX)/elf32.c $(CHPAX)/elf64.c $(CHPAX)/flags.c $(CHPAX)/io.c
CHPAXBIN := ./chpax
all: chpax $(SHLIBS) $(TESTS) $(UTILS) paxtest
else
all: $(SHLIBS) $(TESTS) $(UTILS) paxtest
endif

DUMMY := $(shell echo '${CHPAXBIN} $$*' >> paxbin; chmod +x paxbin)

PAXBIN := ./paxbin

clean:
	-rm -f *.o *.s *~ core
	-rm -f $(TESTS) $(UTILS) $(SHLIBS)
	-rm -f paxtest paxtest.log a.out dumpspecs paxbin

ifdef DESTDIR
ifdef BINDIR
ifdef RUNDIR
install: all
	mkdir -p $(DESTDIR)/$(RUNDIR)
	cp $(SHLIBS) $(TESTS) $(UTILS) $(DESTDIR)/$(RUNDIR)
	mkdir -p $(DESTDIR)/$(BINDIR)
	cp paxtest $(DESTDIR)/$(BINDIR)
	chmod 755 $(DESTDIR)/$(BINDIR)/paxtest
endif
endif
endif

chpax: $(CHPAXSRC:.c=.o)
	$(CC) $(LDFLAGS) -o $@ $^

paxtest: $(TESTS) genpaxtest
	sh genpaxtest $(TESTS)

.S.o:
	$(CC) $(CFLAGS) $(CC_PIC) -o $@ -c $<
.c.o:
	$(CC) $(CFLAGS) -o $@ -c $<

$(EXEC_TESTS) $(MPROT_TESTS): body.o
	$(CC) $(CFLAGS) -o $@.o -c $@.c
	$(CC) $(LDFLAGS) $(PTHREAD) -o $@ $< $@.o
	
$(RAND_TESTS): randbody.o
	$(CC) $(CFLAGS) -o $@.o -c $@.c
	$(CC) $(LDFLAGS) -o $@ $< $@.o

getamap: getamap.o
	$(CC) $(LDFLAGS) -o $@ $@.o
	
# get heap1/main1 are built w/o PIC
get%1.o: get%.c
	$(CC) $(CFLAGS) $(CC_ETEXEC) -o $@ -c $<

# get heap2/main2 are built w/ PIC
get%2.o: get%.c
	$(CC) $(CFLAGS) $(CC_PIC) -o $@ -c $<
	
# Adamantix uses the PIC version (getheap2.o), not necessary for ET_EXEC
# build as ET_EXEC (not in Adamantix's Makefile)
getheap1: getheap1.o
	$(CC) $(LDFLAGS) $(CC_ETEXEC) -o $@ $<

getmain1: getmain1.o
	$(CC) $(LDFLAGS) $(CC_ETEXEC) -o $@ $<
	$(PAXBIN) -SPRXM $@

getheap2 getmain2: $(PAX_DEP) getheap2.o getmain2.o
	$(CC) $(LDFLAGS) $(CC_PIE) -o $@ $(PAX_DEP) $@.o

getshlib: getshlib.o
	$(CC) $(LDFLAGS) -o $@ $< -ldl

# ET_EXEC and usage of "m" is not confirmed (as in Gentoo patch)
# Adamantix does not use it
# Pax Team does not want "m" for getstack1/2
getstack1: getstack.o
	$(CC) $(LDFLAGS) -o $@ $<
	$(PAXBIN) -SRp $@

getstack2: getstack.o
	$(CC) $(LDFLAGS) -o $@ $<
	# disable segmexec, kernel else overrides pageexec
	$(PAXBIN) -PRs $@
	
$(MPROTSH_TESTS): body.o shlibtest.so
	$(CC) $(CFLAGS) -o $@.o -c $@.c
	$(CC) $(LDFLAGS) $(PTHREAD) -o $@ $@.o $^

# used for RANDEXEC'd binaries
retbody.o: body.c
	$(CC) $(CFLAGS) $(CC_ETEXEC) -o $@ -c $<

# build as ET_EXEC (recommended by PaX Team, not really a requirement)
$(RET_TESTS): retbody.o
	$(CC) $(CFLAGS) $(CC_ETEXEC) -o $@.o -c $@.c
	$(CC) $(LDFLAGS) $(CC_ETEXEC) $(PTHREAD) -o $@ $< $@.o

# build as ET_EXEC (not in Adamantix's Makefile)
$(RETX_TESTS): retbody.o
	$(CC) $(CFLAGS) $(CC_ETEXEC) -o $@.o -c $@.c
	$(CC) $(LDFLAGS) $(CC_ETEXEC) $(PTHREAD) -o $@ $< $@.o
	$(PAXBIN) -SPXM $@
	
# should also shlibbss.o and shlibdata.o be built w/ PIC?
# if yes, remove tes from target and dependency
shlibtes%.o: shlibtes%.c
	$(CC) $(CFLAGS) $(CC_PIC) -o $@ -c $<

shlib%.so: shlib%.o
	$(CC) $(SHLDFLAGS) -shared -o $@ $<

$(SHLIB_TESTS): body.o $(SHLIBS) shlibbss.o shlibdata.o
	$(CC) $(LDFLAGS) $(PTHREAD) -o $@ body.o $@.o $(SHLIBS) -ldl